No dialects avaliable when creating representation programmatically

Hi all,
I'm trying to create a representation programatically, but when debugging I find that no dialects are avaliable to create the representation from and hence, no representation is created.
I can activate my viewpoint just fine, so that is not the problem.
How can I create the representation in code? What I try to do now is:
session.getTransactionalEditingDomain().getCommandStack().execute(
new RecordingCommand(session.getTransactionalEditingDomain()) {
@Override
protected void doExecute() {
VisualizationRepresentationDescription description = new VisualizationRepresentationDescription(semanticRoot);
DRepresentation representation = DialectManager.INSTANCE.createRepresentation("test", semanticRoot, description, session, new NullProgressMonitor());
DialectUIManager.INSTANCE.openEditor(session, representation, nprMonitor);
where VisualizationRepresentationDescription is a class that I have written which implements the interface RepresentationDescription. semanticRoot is the root EObject.
What might be wrong?
Regards,
Axel Niklasson

Hi Axel,
Le 03/07/2015 09:22, Axel Niklasson a écrit :
> Hi all,
>
> I'm trying to create a representation programatically, but when
> debugging I find that no dialects are avaliable to create the
> representation from and hence, no representation is created.
>
> I can activate my viewpoint just fine, so that is not the problem.
>
> How can I create the representation in code? What I try to do now is:
>
> session.getTransactionalEditingDomain().getCommandStack().execute(
> new
> RecordingCommand(session.getTransactionalEditingDomain()) {
>
> @Override
> protected void doExecute() {
> VisualizationRepresentationDescription
> description = new VisualizationRepresentationDescription(semanticRoot);
> DRepresentation representation =
> DialectManager.INSTANCE.createRepresentation("test", semanticRoot,
> description, session, new NullProgressMonitor());
> DialectUIManager.INSTANCE.openEditor(session,
> representation, nprMonitor);
> }
>
> });
>
> where VisualizationRepresentationDescription is a class that I have
> written which implements the interface RepresentationDescription.
> semanticRoot is the root EObject.
It seems you have defined a ne representation description kind but
without the creation of your own ecore model to define it like it is
done for the Diagram, Table, Tree dialects and Sequence diagram type.
>
> What might be wrong?
Sirius does not know your representation description:
. how to compute the concrete representation from your description and
semantic model ?
. how to open it in an editor ? which editor ?
. how to define it in the VSM (Viewpoint Specification Model, .odesign
file) editor ?
If you want to provide this new representation kind, you also have to
provide a dialect / dialect ui able to handle it:
. see DialectServices (and the existing implementations:
DiagramDialectServices, TableDialectServices, TreeDialectServices) which
provides services to create/store/refresh the representation model
computed from the representation description on the semantic model.
. see DialectUIServices (and the existing implementations:
DiagramDialectUIServices, TableDialectUIServices, TreeDialectUIServices)
which provides services to complete the VSM editor, open/close the
dialect specific editor, ..
.see also the IDiagramDescriptionProvider which allows to provide new
diagram types without redefining a new diagram dialect. It can be used
(as in Sequence, see SequenceDiagramTypeProvider) to configure the
DDiagramEditor for specific needs (specific DiagramDescription,
additional tools and mappings, diagram header, pin/unpin and other
action support enablement, ..). It allows to let the DiagramDialect to
manage the computation of the Sirius internal diagram model and its GMF
model but extends its capabilities.
Then you have the corresponding extension points:
. org.eclipse.sirius.dialect
. org.eclipse.sirius.ui.dialectui
. org.eclipse.sirius.diagram.diagramTypeProvider
> Regards,
> Axel Niklasson
Regards
Maxime - Obeo
Need professional services for Sirius?
http://www.obeodesigner.com/sirius

Similar Messages

Component has not input columns and/or input columns have invalid id when creating package programmatically

I am developing an ETL tool which has to create SSIS packages dynamically (and later execute them without being edited in Data Tools). One of my proto type scenarios is a simple data flow from a flat file to a flat file - without anything in between.
However there is a problem with the columns of the flat file destination - it says it doesn't have any.
Saving the package to XML and opening the destination component in the advanced editor (tab "Input and Output Properties") really shows that are no input columns defined. One click on the tab "Column Mappings" however solves the
problem. The columns and the mapping are generated, the package can run.
I already tried to place "ReinitializeMetaData()" calls nearly anywhere in the code, for both components, unfortunately without success:
destinationComponentWrapper.AcquireConnections(null);
destinationComponentWrapper.ReinitializeMetaData();
destinationComponentWrapper.ReleaseConnections();
The actual error during validation is (When the line for column mapping in the code below is commented out):
"0xC020201B - The number of input columns for Flat File Destination.Inputs[Flat File Destination Inputs] cannot be zero"
I am also trying to insert a column mapping - this leads to a com error: 0xC020201B
In this case I am wondering why Data Tools tell me that there are no input columns yet I can iterate over them - they just don't have a valid ID (0x8000004B / -2147483573) which is then causing the 0xC020201B.
See also "PROBLEM HERE" marker in the code below.
How can I make the destination component recognize the columns programmatically, as when I click on the "Column Mappings" tab of the advanced editor of the component in Data Tools?
Here is the complete proto type code:
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
using System;
using System.IO;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using Dts = Microsoft.SqlServer.Dts;
namespace msdatapipe
class Program
static void Main(string[] args)
Dts.Runtime.Application application = new Dts.Runtime.Application();
Dts.Runtime.Package package = new Dts.Runtime.Package();
package.Name = "Data Commander DTS Package";
// ADD PIPELINE TASK
Dts.Runtime.Executable pipelineExecutable = package.Executables.Add("STOCK:PipelineTask");
Dts.Runtime.TaskHost pipelineTaskHost = (Dts.Runtime.TaskHost)pipelineExecutable;
pipelineTaskHost.Name = "Data Commander Pipeline Task";
Dts.Pipeline.Wrapper.MainPipe pipelineTask = (Dts.Pipeline.Wrapper.MainPipe) pipelineTaskHost.InnerObject;
// ADD SOURCE COMPONENT TO THE PIPELINE TASK
String sourceFilePath = "C:\\cmi\\tmp\\data.csv";
Dts.Runtime.ConnectionManager sourceConnectionManager = package.Connections.Add("FLATFILE");
sourceConnectionManager.ConnectionString = sourceFilePath;
sourceConnectionManager.Name = "Source Connection";
sourceConnectionManager.Description = "Source Connection Manager";
sourceConnectionManager.Properties["ColumnNamesInFirstDataRow"].SetValue(sourceConnectionManager, "True");
sourceConnectionManager.Properties["Format"].SetValue(sourceConnectionManager, "Delimited");
sourceConnectionManager.Properties["TextQualifier"].SetValue(sourceConnectionManager, "\"");
sourceConnectionManager.Properties["CodePage"].SetValue(sourceConnectionManager, "65001");
sourceConnectionManager.DelayValidation = false;
// START --- MANUALLY READ COLUMNS FROM TEXT FILE AND ADD TO SOURCE CONNECTION MANAGER COLUMNS
IDTSConnectionManagerFlatFile100 sourceConnectionInterface = sourceConnectionManager.InnerObject as IDTSConnectionManagerFlatFile100;
using (StreamReader reader = new StreamReader(sourceFilePath))
String firstSourceFileLine = reader.ReadLine();
String[] columnNames = firstSourceFileLine.Split(',');
for (int i = 0; i < columnNames.Length; ++i)
columnNames[i] = columnNames[i].Substring(1, columnNames[i].Length - 2);
IDTSConnectionManagerFlatFileColumns100 sourceColumns = sourceConnectionManager.Properties["Columns"].GetValue(sourceConnectionInterface) as IDTSConnectionManagerFlatFileColumns100;
IDTSConnectionManagerFlatFileColumn100 column = null;
foreach (String columnName in columnNames)
column = sourceColumns.Add();
column.DataType = DataType.DT_TEXT;
column.ColumnDelimiter = ",";
column.TextQualified = true;
(column as IDTSName100).Name = columnName;
Console.WriteLine(columnName);
column.ColumnDelimiter = "\r\n";
// END --- MANUALLY READ COLUMNS FROM TEXT FILE AND ADD TO SOURCE CONNECTION MANAGER COLUMNS
sourceConnectionInterface.RowDelimiter = "\r\n";
Dts.Pipeline.Wrapper.IDTSComponentMetaData100 sourceComponent = pipelineTask.ComponentMetaDataCollection.New();
sourceComponent.Name = "Flat File Source";
sourceComponent.ComponentClassID = "DTSAdapter.FlatFileSource";
sourceComponent.ValidateExternalMetadata = true;
CManagedComponentWrapper sourceComponentWrapper = sourceComponent.Instantiate();
sourceComponentWrapper.ProvideComponentProperties();
// LINK CONNECTION TO THE SOURCE COMPONENT
sourceComponent.RuntimeConnectionCollection[0].ConnectionManager = Dts.Runtime.DtsConvert.GetExtendedInterface(sourceConnectionManager);
sourceComponent.RuntimeConnectionCollection[0].ConnectionManagerID = sourceConnectionManager.ID;
// Connect to the data source, and then update the metadata for the source.
//sourceComponentWrapper.Validate();
//sourceComponentWrapper.ProvideComponentProperties();
sourceComponentWrapper.AcquireConnections(null);
sourceComponentWrapper.ReinitializeMetaData();
sourceComponentWrapper.ReleaseConnections();
// ADD DESTINATION CONNECTION MANAGER
Dts.Runtime.ConnectionManager destinationConnectionManager = package.Connections.Add("FLATFILE");
destinationConnectionManager.ConnectionString = "C:\\cmi\\tmp\\data_out.csv";
destinationConnectionManager.Name = "DatComConOut";
destinationConnectionManager.Description = "Data Commander Connection Manager";
destinationConnectionManager.DelayValidation = false;
destinationConnectionManager.Properties["Format"].SetValue(destinationConnectionManager, "Delimited");
destinationConnectionManager.Properties["TextQualifier"].SetValue(destinationConnectionManager, "\"");
destinationConnectionManager.Properties["CodePage"].SetValue(destinationConnectionManager, "65001");
// ADD DESTINATION COMPONENT
Dts.Pipeline.Wrapper.IDTSComponentMetaData100 destinationComponent = pipelineTask.ComponentMetaDataCollection.New();
destinationComponent.Name = "Flat File Destination";
destinationComponent.ComponentClassID = "DTSAdapter.FlatFileDestination";
destinationComponent.ValidateExternalMetadata = true;
CManagedComponentWrapper destinationComponentWrapper = destinationComponent.Instantiate();
destinationComponentWrapper.ProvideComponentProperties();
destinationComponent.RuntimeConnectionCollection[0].ConnectionManager = Dts.Runtime.DtsConvert.GetExtendedInterface(destinationConnectionManager);
destinationComponent.RuntimeConnectionCollection[0].ConnectionManagerID = destinationConnectionManager.ID;
// CREATE PATH
Dts.Pipeline.Wrapper.IDTSPath100 pipelinePath = pipelineTask.PathCollection.New();
pipelinePath.AttachPathAndPropagateNotifications(sourceComponent.OutputCollection[0], destinationComponent.InputCollection[0]);
// DESTION CONNECTION MANAGER COLUMNS
IDTSConnectionManagerFlatFile100 destinationConnectionInterface = destinationConnectionManager.InnerObject as IDTSConnectionManagerFlatFile100;
IDTSConnectionManagerFlatFileColumns100 destinationColumns = destinationConnectionManager.Properties["Columns"].GetValue(destinationConnectionManager) as IDTSConnectionManagerFlatFileColumns100;
// START --- MANUALLY READ COLUMNS FROM DESTINATION COMPONENT AND ADD THEM TO DESTIONATION CONNECTION MANAGER COLUMNS
foreach (IDTSInput100 input in destinationComponent.InputCollection)
IDTSVirtualInput100 virtualInput = input.GetVirtualInput();
IDTSConnectionManagerFlatFileColumn100 column = null;
foreach (IDTSVirtualInputColumn100 virtualInputColumn in virtualInput.VirtualInputColumnCollection)
column = destinationColumns.Add();
column.DataType = DataType.DT_TEXT;
column.ColumnDelimiter = ",";
column.TextQualified = true;
(column as IDTSName100).Name = virtualInputColumn.Name;
column.ColumnDelimiter = "\r\n";
// END --- MANUALLY READ COLUMNS FROM DESTINATION COMPONENT AND ADD THEM TO DESTIONATION CONNECTION MANAGER COLUMNS
// NEED TO CREATE NEW META DATA AFTER COLUMNS
destinationComponentWrapper.AcquireConnections(null);
destinationComponentWrapper.ReinitializeMetaData();
destinationComponentWrapper.ReleaseConnections();
// MAP INPUT COLUMNS
foreach (IDTSInput100 input in destinationComponent.InputCollection)
IDTSVirtualInput100 virtualInput = input.GetVirtualInput();
foreach (IDTSVirtualInputColumn100 virtualInputColumn in virtualInput.VirtualInputColumnCollection)
Console.WriteLine("VIC " + virtualInputColumn.Name + "(" + virtualInputColumn.ID + ")");
destinationComponentWrapper.SetUsageType(input.ID, virtualInput, virtualInputColumn.LineageID, DTSUsageType.UT_READONLY);
foreach (IDTSExternalMetadataColumn100 metadataColumn in input.ExternalMetadataColumnCollection)
if (virtualInputColumn.Name.Equals(metadataColumn.Name)) {
// PROBLEM HERE:
// An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in msdatapipe.exe
// Additional information: Exception HRESULT: 0xC0047072
// at this point is virtualInputColumn.ID = -2147483573
destinationComponentWrapper.MapInputColumn(input.ID, virtualInputColumn.ID, metadataColumn.ID);
// if the code is commented out and the program rerun there is a package validation error instead: 0xC020201B
// 0xC020201B - The number of input columns for Flat File Destination.Inputs[Flat File Destination Inputs] cannot be zero
// NEED TO CREATE META DATA AFTER COLUMNS HAVE BEEN ADDED TO THE DESTIONATION MANAGER
// AND USAGE TYPE HAS BEEN SET OR WE'LL GET A VS_NEEDSNEWMETADATA
destinationComponentWrapper.AcquireConnections(null);
destinationComponentWrapper.ReinitializeMetaData();
destinationComponentWrapper.ReleaseConnections();
// SAVING DTSX PACKAGE FOR DEBUGGING
application.SaveToXml("C:\\Users\\CMI\\documents\\visual studio 2010\\Projects\\SSIS Tutorial\\SSIS Tutorial\\generated.dtsx", package, null);
Microsoft.SqlServer.Dts.Runtime.DTSExecResult packageResults = package.Execute();
Console.WriteLine("package execution result: " + packageResults.ToString());
// Basic check for errors
foreach (DtsError error in package.Errors)
Console.WriteLine("ErrorCode : 0x{0:X}", error.ErrorCode);
Console.WriteLine(" SubComponent : {0}", error.SubComponent);
Console.WriteLine(" Description : {0}", error.Description);
Console.WriteLine("press the return key hard to continue...");
Console.Read();

I suggest you revise your code against examples given in http://blogs.msdn.com/b/mattm/archive/2008/12/30/samples-for-creating-ssis-packages-programmatically.aspx
Arthur My Blog

Possible to limit dimensions and measures when creating presentations?

We are trying to use OLAP/BI Beans to add BI functionality to our next-generation data warehouse application. This application has its own security framework, with the ability to define permissions/privileges for objects. We need to integrate BI Beans/OLAP with this security framework.
One of the things we need to do is control which OLAP objects (like dimensions and measures) are available to a given user in the Items tab when creating a presentation. For example, user A might see dimensions Alpha, Bravo and measure Charlie, while user B might see dimensions Delta, Echo and measure Foxtrot.
We need to be able to apply these dimension/measure restrictions without using different Oracle users, with each having access only to their own OLAP objects. Our data warehousing application does not use Oracle and Oracle users to control security; it has its own internal frameworks for privileges/permissions. We therefore need to find a way to restrict access to OLAP objects in some programmatic way.
Here's an example of how this might work:
- I am a clinical analyst. I sign on to the data warehouse application. The data warehouse knows that as a clinical analyst, I have access to a certain list of objects and functionality across the application. One of the apps I have privilege to is the BI Bean Presentation Creation Application, so I click the menu to bring this up. I can now create BI presentations, but since I am a clinical analyst my list of available dimensions and measures do not contain any of the G/L, payroll or other financial OLAP objects.
- If I signed onto the data warehousing application as a different user, one that has a financial analyst role, I might see a different set of OLAP objects when I run the presentation application application.
So what we need is some API way to specify which dimensions and measures are available to a given user when they launch the presentation wizard. I've been digging through the BI Beans help and javadoc and have found a few things, but they aren't what I need.
Here's what I found:
- setItemSearchPath: this allows you to specify which folders are to be displayed. We want control at the OLAP object level, not at the folder level, so this doesn't work for us
- setVisibleDimensions: this controls which dimensions are available in the Dimensions tab, not which dimensions can be selected in the Items tab. Doesn't work for us
- setDimensionContext/setMeasureContext: These might work for us but I haven't been able to get them to retrieve anything yet. It also seems to me that these might set which dimensions/members are initially selected in the Items tab, not the list of dims/measures that are available for selection.
Any assistance on this matter would be greatly appreciated.
s.l.

Reply from one of our developers:
The get/setMeasureContext and get/setDimensionContext methods are currently only used by the Thick CalcBuilder (in a few limited scenarios) and cannot be used "to scope the dimensions and measures listed in Query and Calc builder based on user access rights".
The scoping of dimensions and measures based on user access rights should be performed at the MetadataManager/Database level.
This may change going forward as the real issue here is the static nature of the metadata and a general issue with the GRANT option within the database. So from the database perspective it is not possible to grant select priviledges on a single column of a table.
The metadata issue is more complex as the OLAP API reads the metadata only once on startup of a session. The list of available measures is based on the GRANT priviledge, so for relational OLAP this limits the data scoping capabilities. In 10g, the metadata for AW OLAP becomes more dynamic and contained and read directly from the AW. Therefore, with an AW OLAP implementation with 10g it could be possible to scope boht dimensions and measures quickly and easily.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

For my part you are welcome, sdowers.
Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
I just came to remember a warning that needs to be given:
The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25.

Creating Builds Programmatically LV8.0.1

Salut.
From LV8.0.1 help :
QUOTE
Creating Builds Programmatically
You can use the BuildTargetBuildSpecification VI located in the vi.lib\AppBuilder directory to build source distributions programmatically from build specifications. If you have the Application Builder installed, you can use the VI to build stand-alone applications, shared libraries, Windows installers, and zip files programmatically. The VI is not available on the Functions palette.
Note The LabVIEW Professional Development System includes the Application Builder. If you use the LabVIEW Base Package or Full Development System, you can purchase the Application Builder separately by visiting the National Instruments Web site.
The BuildTargetBuildSpecification VI creates a build from a build specification that you specify in the Name of build specification input. If you do not specify a build specification, the VI creates builds from all build specifications in the specified LabVIEW project. You must specify the path and filename of the project to use in the Path to project input.
If you want the VI to create a build from a build specification located in a target that is not My Computer, specify a target in the Name of target input.
After you run the VI, you can view the path to the completed build files in the Generated files output.
END QUOTE
1-
QUOTE After you run the VI, you can view the path to the completed build files in the Generated files output.END QUOTE
Does someone know how to also get the created installer files? (i only get the exe output files)
2- How can i start the build status feedback window when using the BuildTargetBuildSpecification.vi?

Hi jacemdom,
I hope you're doing well. I have tested building an Installer specification on my end, and I am seeing the same results. The correctly passes in the appropriate build specification reference, but no files are actually generated as you have noticed. I am currently looking for more documentation for you on the BuildTargetBuildSpecification as it is a relatively new feature. Regarding the status window with this VI, it looks like that feature is currently unsupported. I will verify this an update you with what I find. Have a great day!
Thaison V
Applications Engineer
National Instruments

How to create button programmatically and assign trigger for it and add code

is that possible ?
How can I create item a button for example programmatically (at run time)
and create trigger (when-button-pressed) programmatically and write a code
in the trigger body as well programmatically.
thankx

Hello David
I used the way list and go button which is more safer than creating buttons because
you can populate the list on fly.
     | dropdown list     \/
          | go button |
PROCEDURE populate_user_function_list IS
     rg_list_id RECORDGROUP;
     ret_code     NUMBER;
BEGIN
     rg_list_id := FIND_GROUP('RG_LIST');
     IF NOT ID_NULL(rg_list_id) THEN
          DELETE_GROUP(rg_list_id);
     END IF;
     rg_list_id := CREATE_GROUP_FROM_QUERY('RG_LIST','SELECT FUNCTION_ID, FUNCTION_ID FROM SMS_ROLE_FUNCTION WHERE SMS_ROLE_FUNCTION.DB_ROLE ='||''''||:GLOBAL.USER_ROLE||''''||' ORDER BY SEQUENCE_NO');
     ret_code := POPULATE_GROUP(rg_list_id);
     --Populate record group.
          IF ret_code <> 0 THEN
          bell;
          MESSAGE('Record Group could not be populated');
          RAISE FORM_TRIGGER_FAILURE;
          END IF;
     POPULATE_LIST('DYNAMIC_BLK.USER_FUNCTION','RG_LIST');
     DELETE_GROUP(rg_list_id);
END;
--this is the button to go the user selection
begin
     if :DYNAMIC_BLK.USER_FUNCTION is not null then
          --go to selected form
          call_form(:DYNAMIC_BLK.USER_FUNCTION,NO_HIDE,DO_REPLACE,NO_QUERY_ONLY,NO_SHARE_LIBRARY_DATA);
     else
          bell;
          message('Please select a function');
     end if;
end;

Error in Adaptive WebService Model when creating instance of Node

Hi All,
I have created an Adaptive WebService Model which calls a WebService. This WebService has been generated in the CAF and represents an Application Service. One of the Methods of this Application Service returns a Complex Type which contains a list of BOs.
However, when creating an instance of the Request Node, I receive an exception. The coding is:
JobAppModel model = new JobAppModel();
Request_GetAllJobApplications requestMO = new Request_GetAllJobApplications(model); <==
The exception is
com.sun.jdi.InvocationException occurred invoking
The exception is not shown on the screen, only in the debugger in the field where you can see the variables.
Does anybody know where thgis exception ma ycome from or where my mistake is?
Thanks, Johannes

Hi
Have u define the system property path and return type ?
Have a look on this threads
[Test|Problem with XI web service,;
Best Regards
Satish Kumar

Can i create pdx programmatically in c# ?

Can i create pdx programmatically in c# ? If yes, then is it must to use adobe sdk for it ?

I did this using an unpublished API - it took some experimentation but worked great at the end. I used a page template in release 2 of Portal. the idea was that when a user added a project we would programatically create a page for that project. In that manner their portal would end up with several hundred pages, one for each project, that were created and look similar as they added project information for their company. Here is an example from the code using Oracle's API, wwpob_api_page.create_page - if you open up the specification for this package in a pl/sql browser such as TOAD you will see some comments that help explain how to use it:
p_page_id := WWPOB_API_PAGE.create_page
(p_id => null
,p_parent_id => 1
,p_type_id => WWPOB_API_PAGE.PAGETYPE_PORTLETS
,p_type_siteid => 0
,p_type_value => 1
,p_name => p_page_url_info
,p_title => v_page_title
,p_category_id => null
,p_site_id => p_page_group_id
,p_plsql_executemode => null
,p_username => v_user_name
,p_description => v_page_description
,p_image => null
,p_titleimage => null
,p_rolloverimage => null
,p_styleid => v_style_id
,p_style_siteid => 0
,p_exposure => WWPOB_API_PAGE.DONTEXPOSE_AS_PORTLET
,p_ispublic => WWPOB_API_PAGE.PAGE_PRIVATE
,p_inheritpriv => WWPOB_API_PAGE.OWN_PRIV
,p_isready => 1
,p_cachemode => WWPOB_API_PAGE.CACHE_MODE_PING
,p_cacheexpires => null
,p_template_id => p_template_id
,p_template_siteid => p_page_group_id
,p_allow_style => WWPOB_API_PAGE.NO_PAGE_STYLE
,p_allow_acl => WWPOB_API_PAGE.ALLOW_PAGE_ACL
,p_istemplate => WWPOB_API_PAGE.PAGE_TEMPLATE_NO
,p_dav_id => null
,p_init_jspfile => null
,p_displaybanner => WWPOB_API_PAGE.SHOW_BANNER
,p_region_type => WWPOB_API_REGION.region_type_portlet
,p_create_region => true
,p_navpage_id => null
,p_navpage_siteid => null
,p_uitemplate => null
,p_template_ispublic => WWPOB_API_PAGE.PAGE_TEMPLATE_PRIVATE
,p_use_def_template => false
,p_copy_from_template => true
Good luck - Art

How enter the values in to table when create entries option is not working

hi everyone,
can u please tell me How enter the values in to table when create entries option is not working.
it's urgent.
thanking u all

Hi Shree,
how many entries u want to insert ,,
is it a ztable or custom table ..
just tell me ur clear requirement ..
clarify the same ..
if no options avaliable then if its less entries or some value u can do it through debugging ..
if its bulk entries then u can write a program ..
just let me know ..
regards,
VIjay

How to create Request programmatically to trigger Approval Process

My scenario is dificult... I need to start Approval Process when the user want to assign AD Resource to other user without Request service. So I want to create Request programmatically from Event Handler to start Approval Process for Provision Resource request type.
Is this right Way?

If you talk of request, you will have to use RequestService. You can use code to work with the RequestService to create the request and the approval for you.
-Bikash

Customer Master not updated when creating BP- BAPIBUSISM007_CREATEFROMDATA

Hi All
When I creating BP with TCODE BP-with BP role ISM020 , BP is created and all the tables are updated.
But when I create BP programmatically with the BAPI -BAPIBUSISM007_CREATEFROMDATA
Though the BP is created ,But The customer master tables are not updated(KNVV,KNB1,KNA1)
Only table jjtvm is updated.
Hence when we create SALES order , the msg appers that the 'ROLE MEDIA CUSTOMER DOES NOT EXIST FOR BP(BPNO)
Need some help.
regards

HI
Thanks for the reply.
It is indeed very helpful .
I created the BP with my program and then run MDS_ppo2 TCODE
Where I saw the missing field knvv-vkgrp, KNVV-VKGRP: Required field check failed
I am using the BAPI BAPIBUSISM007_CREATEFROMDATA for creating BP, in this in none of importing parameters can i send this value to the table,
Infact I tried with the update statement to send this value to the database for the BP no craeted , but failed as there is no line in KNVV for the BP created ..
Now What should I check for.? pl do tell
Thanks & Regards

When creating new track in stereo... track opens in mono in arrange window

Since upgrading to 8.0.2...weird things are happening to previously saved projects. Stereo tracks are opening up mono and affecting following track. When creating new tracks in stereo.... tracks open mono. I don't know if this is due to 8.0.2 but all these freaky things have happening since. Also, when previewing Apple Loops, I can only hear it on one side, but Loops sounds fine once dragged to arrange window. Is this common or is my computer haunted ? Should I call Ghost Busters ? HELP !!! lol

Hi there,
I'm having the same problem as well: creating new tracks results in a mono software instrument, not the usual stereo software instrument. BUT... "Universal Track Mode" is already checked in my Audio prefs. I unchecked & rechecked it, but to no avail... I'm still only getting mono software instruments.
Any other ideas? No changes have been made to my system, and I'm running the latest version of Logic Pro.
Kirby

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

How to register the recipient when create job by function

I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
Can you tell me how to register the recipient when create the job.
( in sm36, it is easily to do but how to do in coding? )
regards,
slam

Hi
I think in Back ground using the above fun modules you can't send a mail to the receipient.
see the use of the above fun modules;
IF p_bjob = 'X'.
    CONCATENATE sy-cprog sy-datum sy-uzeit
                INTO jobname SEPARATED BY '_'.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = jobname
      IMPORTING
        jobcount         = jobcount
      EXCEPTIONS
        cant_create_job = 1
        invalid_job_data = 2
        jobname_missing = 3
        OTHERS           = 4.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      IMPORTING
        out_archive_parameters = arc_params
        out_parameters         = print_params
        valid                  = valid
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF valid = chk.
      SUBMIT ybrep
                      WITH < sel Screen>
                      AND RETURN
                      USER               sy-uname
                      VIA JOB            jobname
                      NUMBER             jobcount
                      TO SAP-SPOOL
                      SPOOL PARAMETERS   print_params
                      ARCHIVE PARAMETERS arc_params
                      WITHOUT SPOOL DYNPRO.
      CALL FUNCTION 'JOB_CLOSE'
        EXPORTING
          jobcount             = jobcount
          jobname              = jobname
          strtimmed            = 'X'
        EXCEPTIONS
          cant_start_immediate = 1
          invalid_startdate    = 2
          jobname_missing      = 3
          job_close_failed     = 4
          job_nosteps          = 5
          job_notex            = 6
          lock_failed          = 7
          invalid_target       = 8
          OTHERS               = 9.
      IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        MESSAGE i029 WITH jobname.
      ENDIF.
    ELSE.
      MESSAGE s000 WITH text-003.
      STOP.
    ENDIF.
ENDIF.
Reward points if useful
Regards
Anji

Error when creating pivot table in BI publisher template

When I try to create a chart or pivot in BI publisher it keeps throwing error
'Please load Datasource first'
It allows me to create table so I am not sure why is complaing when creating a pivot.

Hi
This error you are getting while creating RTF template right?
yes, before proceeding to use the columns you need to load the XML data of your data model into your template
1. Open Microsoft Word.
2. From the Oracle BI Publisher menu, select Log On.
3. Enter your BI Publisher credentials and the URL for the BI Publisher server. (Contact your system administrator if you do not know the URL.)
4. The Open Template dialog presents the same folder structure as your BI Publisher Reports home page. Select the report for which you want to build a template.
5. Select Open Report to load the data to the Template Builder; or double-click <New> in the Layout Templates pane.
Note that any existing templates will be listed in the Layout Templates pane.
select <New> in Layout template section than select Open layout tempate to get automatically load your data into template..
ELSE
do manually,
in publisher,
after saving your report go to view the report
select data template and import that to your local drive.
now in your MS-Word.. in bi publisher toolbar
you find Data option, then select the load xml and give that path...
after this you can carry on creating charts or tables..
Hope this is what you want..
Thanks & Regards
Kishore Guggilla

No dialects avaliable when creating representation programmatically

Similar Messages

Maybe you are looking for