No Dimension Server entry was found in the EPM registry
I have installed 11.1.2.3 on Linux 64bit.
I can log into the EPMA workspace but not able to open the calculation manager. And when I try to open it I get this error:
No Dimension Server entry was found in the EPM registry.
Please ADVISE. Thanks.
Avishek wrote:
I have installed 11.1.2.3 on Linux 64bit.
I can log into the EPMA workspace but not able to open the calculation manager. And when I try to open it I get this error:
No Dimension Server entry was found in the EPM registry.
Please ADVISE. Thanks.
Have we not been here before and you asked similar questions?
https://forums.oracle.com/thread/2482930
https://forums.oracle.com/thread/2473594
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
Hi guys,
I installed webloigic 12.1.1 on windows 2003(32-bit);
I was requested add SSL Configuration to console;
I'm using keytool; It is not first time I setup SSL on weblogic console, only version is different;
before I did susssessfully on weblogic 11g(10.3.2-10.3.5) using the same scenario;
My steps:
1.generate key;
keytool -keyalg RSA -genkey -v -alias <server_name> -keysize 2048 -storepass <pwd> -validity 762 -keystore <name>.jks
2. create cert
keytool -certreq -alias <server_name> -file file_name.csr -keystore <name>.jks
after send and return certificate 3 layers;
imported back;
--root--
keytool -importcert -v -noprompt -alias rootca.kbr.com -file root0.cer -keystore <name>.jks -trustcacerts
Enter keystore password:
Certificate was added to keystore
[Storing <name>.jks]
keytool -importcert -v -noprompt -alias rootca1.kbr.com -file root1.cer -keystore <name>.jks -trustcacerts
Enter keystore password:
Certificate was added to keystore
[Storing <name>.jks]
keytool -importcert -v -noprompt -alias <server_name> -file root2.cer -keystore <name>.jks -trustcacerts
Enter keystore password:
Certificate reply was installed in keystore
[Storing <name>.jks]
confufigured weblogic using conosole;
it looks like this in config.xml file
<ssl>
<enabled>true</enabled>
<listen-port>7002</listen-port>
<server-private-key-alias><server_name></server-private-key-alias>
<server-private-key-pass-phrase-encrypted>{AES}TIRM5RT26K8IZDevCNMexlWp3BuhZaFpi8HEgPaOCrU=</server-private-key-pass-phrase-encrypted>
</ssl>
<listen-address>34.64.3.9</listen-address>
<key-stores>CustomIdentityAndCustomTrust</key-stores>
<custom-identity-key-store-file-name>path<name>.jks</custom-identity-key-store-file-name>
<custom-identity-key-store-type>JKS</custom-identity-key-store-type>
<custom-identity-key-store-pass-phrase-encrypted>{AES}hiemEGOTrjIRvEOnn0+ODuNpWehBbrgb8fydImfyXV4=</custom-identity-key-store-pass-phrase-encrypted>
<custom-trust-key-store-file-name>path<name>.jks</custom-trust-key-store-file-name>
<custom-trust-key-store-type>JKS</custom-trust-key-store-type>
<custom-trust-key-store-pass-phrase-encrypted>{AES}xzP2kU98nkVMNLdzMv7VRoRjoBQUTu5jjtlMLm87PHc=</custom-trust-key-store-pass-phrase-encrypted>
</server>
When I restart SSL , I see error in log file
Er<AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1381506732875>
<BEA-000297> <Inconsistent security configuration, weblogic.management.configuration.ConfigurationException: No identity key/certificate entry was found under alias <SERVER_NAME> in keystore path<name>.jks on server AdminServer>
Please help
I thought before if import certification get status Certificate reply was installed in keystore
it shouldn't be problem for weblogic use thsi certificate;Compare your steps with the following
http://weblogic-wonders.com/weblogic/2011/05/25/ssl-configuration-for-weblogic-server/ -
No identity key/certificate entry was found under alias test keystore
I created a keystore using the command
keytool -genkey -alias test-keystore c:\TestKeyStore\test1
Then imported certificates which i downloaded from the targets website
keytool -import -alias itestcomodo -keystore c:\TestKeyStore\test1.jks -trustcacerts -file (.cer file name)
keytool -import -alias TestEXternalCARoot -keystore c:\TestKeyStore\test1.jks -trustcacerts -file (.cer file name)
keytool -import -alias TestPrimaryIntermediate -keystore c:\TestKeyStore\test1.jks -trustcacerts -file (.cer file name)
keytool -import -alias TestSecondaryIntermediate -keystore c:\TestKeyStore\test1.jks -trustcacerts -file (.cer file name)
Then I added the certificates to the java cacert file and to oracle weblogic cacaert file
C:\oracle\Middleware\wlserver_10.3\server\lib\cacerts
I setup under weblogic admin console
Keystore type as Custome identity and Java Standard keystore and included test1.jks with the passphrase.
Similarly I configured the ssl tab but I am geting the following alert on weblogic console
<Jan 25, 2012 1:12:43 PM EST> <Notice> <Security> <BEA-090171> <Loading the iden
tity certificate and private key stored under the alias test from the JKS
keystore file c:\TestKeyStore\test1.jks
<Jan 25, 2012 1:12:43 PM EST> <Alert> <Security> <BEA-090168> <No identity key/c
ertificate entry was found under alias test in keystore c:\TestKeyStore\test1.jks
After this going down i get SSL Handshake error saying The security certificate recieved from (the target website) was not
signed properly.
Please help.
Thanks,you can learn few basics from below link :
http://www.weblogic-tips.com/2008/07/27/how-to-configure-self-sign-certificate-on-weblogic-server/
http://www.weblogic-tips.com/2008/07/27/configuring-commercial-certificates-on-weblogic-server/
http://www.weblogic-tips.com/2008/07/27/steps-to-create-self-sign-certificates-for-weblogic-server/
In simple words , I would say that Private key and Public key exist in pair . Private key in case of weblogic server is used for encrypting the data and public key is used for decrypting the data which is a mandatory step in SSL handshake .
You can learn process of Handshake for below link which is very important to learn SSL .
http://www.weblogic-tips.com/2010/05/20/two-way-ssl-on-weblogic-server/
Thanks,
Sandeep
Edited by: sandeep_singh on Jan 26, 2012 10:04 PM -
More than one X.509 certificate was found with the specified parameters
Greetings All,
We are getting an error in our application event logs every minute or so and it seems to be causing search queries to fail. Same error is appearing in the ULS logs.
System
Provider
Name]
System.ServiceModel
4.0.0.0
EventID
3
Qualifiers]
49154
Level
2
Task
5
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-06-25T02:30:12.000000000Z
EventRecordID
92894
Channel
Application
Computer
Security
UserID]
EventData
System.ServiceModel.ServiceHostingEnvironment+HostingManager/63835064
System.ServiceModel.ServiceActivationException:
The service '/0c98374520dc4b748d92a1e51b365dce/SearchService.svc' cannot be
activated due to an exception during compilation. The exception message is: More
than one X.509 certificate was found with the specified parameters.. --->
System.ArgumentException: More than one X.509 certificate was found with the
specified parameters. at
Microsoft.SharePoint.Utilities.CertificateManager.GetCertificate(String
storeName, StoreLocation storeLocation, X509FindType findType, Object findValue)
at
Microsoft.SharePoint.Administration.SPIisWebServiceSettings.get_LocalSslCertificate()
at Microsoft.SharePoint.SPServiceHostOperations.Configure(ServiceHostBase
serviceHost, SPServiceAuthenticationMode authenticationMode) at
Microsoft.Office.Server.Search.Administration.SearchServiceHostFactory.CreateServiceHost(String
constructorString, Uri[] baseAddresses) at
System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String
normalizedVirtualPath, EventTraceActivity eventTraceActivity) at
System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(ServiceActivationInfo
serviceActivationInfo, EventTraceActivity eventTraceActivity) at
System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String
normalizedVirtualPath, EventTraceActivity eventTraceActivity) --- End of inner
exception stack trace --- at
System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String
normalizedVirtualPath, EventTraceActivity eventTraceActivity) at
System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String
relativeVirtualPath, EventTraceActivity
eventTraceActivity)
w3wp
6328
Doesn't appear to affect the component health status or the crawling process, only the return of search results.
Sorry, something went wrong.
Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.
I checked the certificates snapin, didn't see anything out of the ordinary but I have a feeling it goes deeper than that.
Where can I remove this duplicate certificate? Thanks!Open IIS and check server certificates
Check if there is any certificate applied to Security token service
Did you used any certificate for web application in site
Check binding of all web application in IIS
Try to browse
servername/0c98374520dc4b748d92a1e51b365dce/SearchService.svc from all servers, check the certificate details
If this helped you resolve your issue, please mark it Answered -
Hi,
I,'m using c.tld tag libraries from Yakarta in order to use c:if functions.
When I use non-unicode characters in my JSP pages, it crashes:
java.io.IOException: javax.servlet.jsp.JspException: The taglib validator rejected
the page: "org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x80)
was found in the CDATA section., "
at weblogic.servlet.jsp.Jsp2Java.outputs(Jsp2Java.java:124)
at weblogic.utils.compiler.CodeGenerator.generate(CodeGenerator.java:258)
at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:353)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:211)
at weblogic.servlet.jsp.JspStub.checkForReload(JspStub.java:149)
at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:521)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:351)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5445)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
How can I force it to use ISO-8859-1? All my tries haven't work. What should I
do? The c.tld libraries and jars are taken from JDK 1.4.1_02
Hi Stefan,
This is my source xml in moni..
xmlns:prx="urn:sap.com:proxy:ECP:/1SAI/TAS5BFDF495190544E4B506:701:2008/06/06">
<SiteId>0080</SiteId>
<UCC>42027519 91029010015</UCC>
My interface is SAP(Proxy) to Database(Synchronous).
SAP (PROXY) --> PI --> DATABASE ( Synchronous Communication )
Let me know if u need any information from my side...
Thanks for ur help...
Thanks,
Siva.. -
No disk was found in the drive
Trying to burn a dual layer project using verbatim DVD+R DL (which has worked before on this computer) and getting this error:
No disk was found in the drive. Please insert acceptable recordable media.
PowerBook 1.33GHz Mac OS X (10.3.9) DVDSP 4http://discussions.apple.com/search.jspa?threadID=&q=memorex&objID=&dateRange=al l&userID=David+Harbsmeier&numResults=15&rankBy=10001
-
'An invalid public movie atom was found in the movie' Error Message
I was just tidying up all the music in iTunes and came across an album that half the songs are unplayable... I get no action with iTunes. I tried opening one of them with Quicktime and I get the following message:
An invalid public movie atom was found in the movie
I wonder if there might be a fix. I have the original CD at home but I am traveling and won't be back for a few months...
Thanks!I tried to play video clips on from lynda.com and the Q appears but only the audio plays.I am new to Mac and have no idea what to do. The same clips play on my windows pc just fine and that is version 7.3.
-
Openshot + Blender: No frame was found in the Output from Blender
Can't get this to work. Anyone know why?
Using OpenShot version 1.4.0
blender -v
Blender 2.61 (sub 0)
build date: 2012-01-05
build time: 10:31:02
build revision: unknown
build platform: Linux
build type: Release
build c flags: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -fopenmp -msse2 -msse -pipe -fPIC -funsigned-char -fno-strict-aliasing -Wall -Wcast-align -Werror=declaration-after-statement -Werror=implicit-function-declaration -Werror=return-type -Wstrict-prototypes -Wno-char-subscripts -Wno-unknown-pragmas -Wpointer-arith -Wunused-parameter -Wwrite-strings -Wno-error=unused-but-set-variable
build c++ flags: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -D__STDC_CONSTANT_MACROS -fopenmp -msse2 -msse -pipe -fPIC -funsigned-char -fno-strict-aliasing -Wall -Wno-invalid-offsetof -Wno-sign-compare
build link flags: -pthread
build system: CMake
Blender command: blender -b '/usr/lib/python2.7/site-packages/openshot/blender/blend/blur.blend' -P '/home/user/.openshot/blender/fdd1c574-44dd-11e1-bf0d-54e6fc88c972/blur.py'
Traceback (most recent call last):
File "/home/user/.openshot/blender/fdd1c574-44dd-11e1-bf0d-54e6fc88c972/blur.py", line 150, in <module>
bpy.context.scene.render.file_format = params["file_format"]
AttributeError: 'RenderSettings' object has no attribute 'file_format'
No frame was found in the output from Blender
Blender render thread finished
Last edited by whoops (2012-01-22 09:47:37)yes, that is correct that it crashes with the new code when i have both made it a separate library function node and when i incorporated it into an existing code. the odd thing is that it actually seems to work now. i believe that i was using the wrong environment to call the new codes, which is why whenever i tried to revert to the original code previously, it still crashed. it seems that in order to be called, i need to use Deployment rather than Development and ppc instead of i386 in the active configuration and architecture in Xcode, respectively. while playing around with the iphone app, it must have reset my defaults to a non-labview friendly form. so now that i've got that part of the code working, i need to find out why it's still crashing on me. at first, i thought it must be the random number generator, but testing that separately in the code works just fine, so there must be something internal in the code. probably a memory allocation fault. but now that i can actually get everything running once more, i should be able to sort that issue out myself.
thank you very much for the help. sorry i didn't actually have anything to fix, unfortunately. i'm going to spend some time trying to debug this section of code to find where the fault lays. i may come back if i cannot find it in there, but hopefully it will not come to that.
take care and many thanks,
justin -
InsertPage RaiseError: An incorrect structure was found in the PDF file
Hi,
I am trying to build a button script that will create a new document, copy (insert) from the first page of the open document, save it, then close it. I believe the part where it gets tricky -- and possibly not doable -- is that the original (source) document uses a template; full of form fields to possibly be spawned off as new pages.
Given the above, ideally the user of the form can click on the "save new page" button: it creates anj Inserted copy of the first form page, cleared of content if any has been entered, and not including any other pages that may have been spawned.
With the code I am using, it currently creates the copy of the page and it inserts it as the zeroeth page (ahead of a blank page I intend to add code later to delete) and saves it. However, there are a couple of problems that come up with this. First is the error code that opens in the debugger:
RaiseError: An incorrect structure was found in the PDF file
Doc.insertPages:29:AcroForm:Save New Form:Annot1:MouseUp:Action1
===> An incorrect structure was found in the PDF file
Despite the error it does still save the page (form copy) as mentioned above. However, if you try to start working with it, it lets you know that there are no form fields on the document (even though they are all there and seemingly functional). When I look to edit the fields, it will then ask you if you want to try to recognize the fields. If I click on "yes", it says it was unable to, but then the form opens up with all of the field names perfectly matching the original. If I click on "no" it just opens the page with all of the fields perfectly matching again. So I feel like I am close to being able to do this!
I am using the following code to produce my results:
(In the JavaScript "app" folder, I have the following trusted functions:)
myTrustedMenu = app.trustedFunction(function(name)
app.beginPriv();
app.execMenuItem(name);
app.endPriv();
myTrustedSaveAs = app.trustedFunction(function(doc, namePath)
app.beginPriv();
doc.saveAs(namePath);
app.endPriv();
myTrustedNewDoc = app.trustedFunction(function()
app.beginPriv();
var doc = app.newDoc();
app.endPriv();
return doc;
myTrustedInsertPage = app.trustedFunction(function(doc, namePath)
app.beginPriv();
doc.insertPages ({
nPage: -1,
cPath: namePath,
nStart: 0
app.endPriv();
(On the "Save New Form" button, the following code is activated:)
// First split document path into an array
var aPathComps = this.path.split("/");
// Get File Name off end of array
var myFileName = aPathComps.pop();
var pathway = aPathComps.join("/");
var myDoc = myTrustedNewDoc();
myTrustedSaveAs(myDoc, pathway + "/test.pdf");
myTrustedInsertPage(myDoc, this.path);
//myDoc.resetForm();
//myDoc.closeDoc(true);
I apologize for the long post and I appreciate anyone who takes the time to look into this issue for me.
Thanks,
MikeMikeIs2C wrote:
You nailed it TSN! Deleting the tags did the trick. Thank you so much for your help! Just an FYI for any of you fellow "noobs" that might be referencing this discussion, to open the "Tabs" view (in Adobe Acrobat Pro XI in my case) go to View > Show/Hide > Navigation Panels > Tags. I looked all over the place for that until I found a document that mentioned how to open it.
Thanks for pointing out specifically how to get here. Thanks to the all for this post!
I also encountered this error, "An incorrect structure was found in the PDF file" from my published MadCap Flare user guide. I am attempting to find a way to build a bridge between Flare and Google documents for corporate-wide collaboration. Thus far, it's a crazy challenge finding a way to produce gdocs from Flare output. Neither product makes this easy. The closest I can get is by publishing the Flare doc as a PDF... but then I must break that document down into 2mb chucks...which led me to this problem, after attempting to use the Adobe Acrobat splitting tool.
Question:
What is the root cause of these bad tags. There are a LOT of them! Is this a fault in the way MadCap Flare creates a PDF document?
Yes, deleting some of the tags will allow me to finally split a PDF document. Unfortunately, this error occurs in all my published PDF documents, thus preventing me from automating (scripting) this split and then conversion to Google Docs!
Thank you -
Incorrect structure was found in the PDF message
I have a folder level javascript that creates a custom menu item which when clicked inserts a page at the end of the open document.
Sometimes when executed, a dialog box appears that says "An incorrect structure was found in the PDF file" but the page is inserted anyway.
We work with a lot of documents that have been scanned as a PDF. However, as I said it only occurs with some documents....
Is it just the way they have been scanned? Or is there an error in my script? Or perhaps another explanation?
Could I suppress that particular alert since the page is inserted anyway?
---edit----
I have just checked the script with Acrobat 7.0 and although I don't get the 'Incorrect structure was found in the PDF' message the javascript debugger appears with this message in the console:'Exception in line 19 of function anonymous, script folder-level:App:InsertSummaryPage.js' but once again the page is still inserted anyway.
Here is the javascript I am using to insert a page:
trustedNewDoc = app.trustedFunction(function ()
app.beginPriv(); // Explicitly raise privilege
this.insertPages({nPage:this.numPages-1, cPath:"/C/Program Files/Adobe/Acrobat 7.0/Acrobat/Javascripts/SummaryPage.pdf"});
app.endPriv();
app.addMenuItem({cName:"Insert Summary Page", cParent:"Tools", cExec:"trustedNewDoc()"});
ThanksLarry – I did what you said and got the form to comply. I combined all the pages and suffered as the software bombed about every third or fourth move I made. For some reason, the form fields work like they should, but the text never goes into the order you want it to. I was having to move the text to the bottom and it would bomb every time I did. I would launch the software again and it would work for about 5 or 6 moves, but every time I moved the text to its proper place in the order, it bombs the program.
But your suggestion was the correct one.
I did get the message that some of the names were the same and I’ve had that happen before. I’ve gotten better at my naming convention. I’m hooked up to a network here and some times when they are doing whatever they do behind the scenes, I’ve had the software not cooperate or not perform optimally.
Our forms here were all built long ago, and the nature of them is to cram as much info onto a page as you can. It’s not uncommon to have 150 – 200 items per page. This makes compliance a real effort.
Thanks again for all your help.
Rob -
An invalid XML character (Unicode: 0x0) was found in the prolog of the docu
Hi folks,
I'm using the SAX parser to parse a small xml file. If I use that file in IE, there its parsing correctly and displaying the xml in the tree structure.
But in my Java code its throwing
org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x0) was found in the prolog of the document.
The xml parsing code of my program is
XMLReader parser = XMLReaderFactory.createXMLReader(
"org.apache.xerces.parsers.SAXParser");
HelpPartHandler hp = new HelpPartHandler();
parser.setContentHandler(hp);
RandomAccessFile raf = new RandomAccessFile("sample.xml","r");
byte Contents[] = new byte[(int)raf.length()];
StringReader sr = new StringReader(new String(Contents));
InputSource is = new InputSource(sr);
parser.parse(is);
The xml file is
<?xml version="1.0"?>
<ROOT>
<NODE> Java </NODE>
</ROOT>
Please let me know the mistakes what I have done. Looking for the reply.
Thanks in Advance
PrabuThe message seems clear to me. Your document contains a null character, which is not valid in an XML document. Take it out of the document, and change whatever produced the document to not put it there. (I hope you don't consider Microsoft software to be standards-compliant.)
-
Dear Team,
Oracle 12c GRID Runclufy check failing with below error. Even After Changing Local Built in Administrator User Name also same failure reporting. Kindly help to resolve this Issue and Provide steps to Avoid this conflict.
Windows user account consistency check across nodes - Checks consistency of Windows user account across nodes Error:
PRVG-11818 : Windows user "MDCCOMMONLDAP\Administrator" is a domain user but a conflicting local user account was found on nodes "sep03vvm-401,sep03vvm-402" -
Cause: A conflicting local user account as indicated was found on the identified nodes. - Action: Ensure that the Windows user account used for Oracle installation and configuration is defined as a domain user on all nodes or as a local user on all nodes, but not a mixture of the two.
Check Failed on Nodes: [sep03vvm-402, sep03vvm-401]
c:\Oracle12c_software\Oracle12c_grid\grid>runcluvfy.bat stage -pre crsinst -verbose -n SEP03VVM-401,SEP03VVM-402
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "sep03vvm-401"
Destination Node Reachable?
sep03vvm-401 yes
sep03vvm-402 yes
Result: Node reachability check passed from node "sep03vvm-401"
Checking user equivalence...
Check: User equivalence for user "Administrator"
Node Name Status
sep03vvm-402 passed
sep03vvm-401 passed
Result: User equivalence check passed for user "Administrator"
Checking node connectivity...
Interface information for node "sep03vvm-402"
Name IP Address Subnet Gateway Def. Gateway HW Addre
ss MTU
PublicLAN 153.71.45.202 153.71.45.0 On-link 153.71.45.254 00:50
:56:91:05:30 1500
PrivateLAN 10.10.10.15 10.10.10.0 On-link 153.71.45.254 00:5
0:56:91:75:1B 1500
6TO4 Adapter 2002:9947:2dca::9947:2dca 2002::
00:00:00:00:00:00 1280
Interface information for node "sep03vvm-401"
Name IP Address Subnet Gateway Def. Gateway HW Addre
ss MTU
PublicLAN 153.71.45.201 153.71.45.0 On-link 153.71.45.254 00:50
:56:91:56:B6 1500
PrivateLAN 10.10.10.14 10.10.10.0 On-link 153.71.45.254 00:5
0:56:91:60:99 1500
6TO4 Adapter 2002:9947:2dc9::9947:2dc9 2002::
00:00:00:00:00:00 1280
Check: Node connectivity of subnet "153.71.45.0"
Source Destination Connected?
sep03vvm-402[153.71.45.202] sep03vvm-401[153.71.45.201] yes
Result: Node connectivity passed for subnet "153.71.45.0" with node(s) sep03vvm-
402,sep03vvm-401
Check: TCP connectivity of subnet "153.71.45.0"
Source Destination Connected?
sep03vvm-402 : 153.71.45.202 sep03vvm-402 : 153.71.45.202 passed
sep03vvm-401 : 153.71.45.201 sep03vvm-402 : 153.71.45.202 passed
sep03vvm-402 : 153.71.45.202 sep03vvm-401 : 153.71.45.201 passed
sep03vvm-401 : 153.71.45.201 sep03vvm-401 : 153.71.45.201 passed
Result: TCP connectivity check passed for subnet "153.71.45.0"
Check: Node connectivity of subnet "10.10.10.0"
Source Destination Connected?
sep03vvm-402[10.10.10.15] sep03vvm-401[10.10.10.14] yes
Result: Node connectivity passed for subnet "10.10.10.0" with node(s) sep03vvm-4
02,sep03vvm-401
Check: TCP connectivity of subnet "10.10.10.0"
Source Destination Connected?
sep03vvm-402 : 10.10.10.15 sep03vvm-402 : 10.10.10.15 passed
sep03vvm-401 : 10.10.10.14 sep03vvm-402 : 10.10.10.15 passed
sep03vvm-402 : 10.10.10.15 sep03vvm-401 : 10.10.10.14 passed
sep03vvm-401 : 10.10.10.14 sep03vvm-401 : 10.10.10.14 passed
Result: TCP connectivity check passed for subnet "10.10.10.0"
Check: Node connectivity of subnet "2002::"
Source Destination Connected?
sep03vvm-402[2002:9947:2dca::9947:2dca] sep03vvm-401[2002:9947:2dc9::9947:2dc
9] yes
Result: Node connectivity passed for subnet "2002::" with node(s) sep03vvm-402,s
ep03vvm-401
Check: TCP connectivity of subnet "2002::"
Source Destination Connected?
sep03vvm-402 : 2002:9947:2dca::9947:2dca sep03vvm-402 : 2002:9947:2dca::9947:
2dca passed
sep03vvm-401 : 2002:9947:2dc9::9947:2dc9 sep03vvm-402 : 2002:9947:2dca::9947:
2dca passed
sep03vvm-402 : 2002:9947:2dca::9947:2dca sep03vvm-401 : 2002:9947:2dc9::9947:
2dc9 passed
sep03vvm-401 : 2002:9947:2dc9::9947:2dc9 sep03vvm-401 : 2002:9947:2dc9::9947:
2dc9 passed
Result: TCP connectivity check passed for subnet "2002::"
Interfaces found on subnet "153.71.45.0" that are likely candidates for VIP are:
sep03vvm-402 PublicLAN:153.71.45.202
sep03vvm-401 PublicLAN:153.71.45.201
Interfaces found on subnet "2002::" that are likely candidates for VIP are:
sep03vvm-402 6TO4 Adapter:2002:9947:2dca::9947:2dca
sep03vvm-401 6TO4 Adapter:2002:9947:2dc9::9947:2dc9
Interfaces found on subnet "10.10.10.0" that are likely candidates for a private
interconnect are:
sep03vvm-402 PrivateLAN:10.10.10.15
sep03vvm-401 PrivateLAN:10.10.10.14
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "153.71.45.0".
Subnet mask consistency check passed for subnet "10.10.10.0".
Subnet mask consistency check passed for subnet "2002::".
Subnet mask consistency check passed.
Result: Node connectivity check passed
Checking multicast communication...
Checking subnet "153.71.45.0" for multicast communication with multicast group "
224.0.0.251"...
Check of subnet "153.71.45.0" for multicast communication with multicast group "
224.0.0.251" passed.
Check of multicast communication passed.
Checking the status of Windows firewall
Node Name Enabled? Comment
sep03vvm-402 no passed
sep03vvm-401 no passed
Result: Windows firewall verification check passed
Check: Total memory
Node Name Available Required Status
sep03vvm-402 4.9996GB (5242420.0KB) 4GB (4194304.0KB) passed
sep03vvm-401 4.9996GB (5242420.0KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Status
sep03vvm-402 3.6612GB (3839028.0KB) 50MB (51200.0KB) passed
sep03vvm-401 3.3152GB (3476244.0KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Status
sep03vvm-402 5.8121GB (6094388.0KB) 4.9996GB (5242420.0KB) passed
sep03vvm-401 5.8121GB (6094388.0KB) 4.9996GB (5242420.0KB) passed
Result: Swap space check passed
Check: Free disk space for "sep03vvm-402:C:\Windows\temp"
Path Node Name Mount point Available Required Stat
us
C:\Windows\temp sep03vvm-402 C 82.6484GB 1GB pass
ed
Result: Free disk space check passed for "sep03vvm-402:C:\Windows\temp"
Check: Free disk space for "sep03vvm-401:C:\Windows\temp"
Path Node Name Mount point Available Required Stat
us
C:\Windows\temp sep03vvm-401 C 82.6112GB 1GB pass
ed
Result: Free disk space check passed for "sep03vvm-401:C:\Windows\temp"
Check: System architecture
Node Name Available Required Status
sep03vvm-402 64-bit 64-bit passed
sep03vvm-401 64-bit 64-bit passed
Result: System architecture check passed
Checking length of value of environment variable "PATH"
Check: Length of value of environment variable "PATH"
Node Name Set? Maximum Length Actual Length Comment
sep03vvm-402 yes 5119 100 passed
sep03vvm-401 yes 5119 129 passed
Result: Check for length of value of environment variable "PATH" passed.
Checking availability of ports "6200,6100" required for component "Oracle Notifi
cation Service (ONS)"
Node Name Port Number Protocol Available Status
sep03vvm-402 6200 TCP yes successful
sep03vvm-401 6200 TCP yes successful
sep03vvm-402 6100 TCP yes successful
sep03vvm-401 6100 TCP yes successful
Result: Port availability check passed for ports "6200,6100"
Starting Clock synchronization checks using Network Time Protocol(NTP)...
Checking daemon liveness...
Check: Liveness for "W32Time"
Node Name Running?
sep03vvm-402 yes
sep03vvm-401 yes
Result: Liveness check passed for "W32Time"
Check for NTP daemon or service alive passed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking if current user is a domain user...
Check: If user "Administrator" is a domain user
Result: User "MDCCOMMONLDAP\Administrator" is a part of the domain "MDCCOMMONLDA
P"
Check: Time zone consistency
Result: Time zone consistency check passed
Checking for status of Automount feature
Node Name Enabled? Comment
sep03vvm-402 yes passed
sep03vvm-401 yes passed
Result: Check for status of Automount feature passed
Checking consistency of current Windows user account across all nodes
PRVG-11818 : Windows user "MDCCOMMONLDAP\Administrator" is a domain user but a c
conflicting local user account was found on nodes "sep03vvm-402"
Result: Check for Windows user account "MDCCOMMONLDAP\Administrator" consistency
failed
Pre-check for cluster services setup was unsuccessful.
Checks did not pass for the following node(s):
sep03vvm-402SEVERE: [FATAL] [INS-30131] Initial setup required for the execution of installer validations failed.
CAUSE: Failed to access the temporary location.
ACTION: Ensure that the current user has required permissions to access the temporary location.
Are you using a supported OS version (listed in the Install Doc) and following all of the steps in the Install Doc ?
HTH
Srini -
Exporting Slide Show- Invalid media was found in the movie
I have been trying all day to send a photo album to Itunes to put on my Ipod. Every time I try I eventually get the message that Invalid Media Data was found in the movie. What does this mean and how to I fix this.
I am having the same problem. I am exporting a slide show (450 pics) and after A LONG TIME (probably double the previous time it took in the previous iPhoto), I get an error message that says 'Invalid Media Data was found in the Movie'. I also thought it might be protected mp3s (I have music with the slideshow) and I found one 'possible' problem song file, but after I corrected it, I get the same error.
I have noticed that iPhoto 09 gives an import error for some types of .jpeg files (in particular those imported after scanning using the Image Capture program). I also noticed as I was editing the slide show that there are 5-6 pictures that come up black when you flip thru them in the viewer/editor. They show up in the scan, but do not in the viewer.
I have run the slideshow in 'play' mode several times without issue. I urgently need this file for tomorrow. If anyone has any suggestions on workarounds today, I would appreciate it.
Mark -
What does "Error-2041: an invalid sample description was found in the movie"means?
what does "Error-2041: an invalid sample description was found in the movie"means?
I have the exact same problem. I have a PPC 6700, and now I can't view movies I created with it in mp4. If change extension file to 3GP video works just fine.
Also, when I try to see a webpage with a Quicktime video clip, I only get a Quicktime logo with a big question mark in it, but no play.
I tried uninstalling and reinstalling, but nothing seems to work.
I have Windows XP, and it worked fine until a couple weeks ago. Not sure if when upgrading to Quicktime 7.2, though. -
Error -2041: an invalid sample description was found in the movie
I just tried to use quick time to open mp4 on my PC (taken from my dopod/HTC pda phone), but NOW get "error -2041: an invalid sample description was found in the movie". I used to be able to watch the vids, but no longer......
I have the exact same problem. I have a PPC 6700, and now I can't view movies I created with it in mp4. If change extension file to 3GP video works just fine.
Also, when I try to see a webpage with a Quicktime video clip, I only get a Quicktime logo with a big question mark in it, but no play.
I tried uninstalling and reinstalling, but nothing seems to work.
I have Windows XP, and it worked fine until a couple weeks ago. Not sure if when upgrading to Quicktime 7.2, though.
Maybe you are looking for
-
I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine. Which versio
-
I have a adobe PDF on my computer that i would like to open in indesign to edit and then re-save it as a PDF!? Does anyone know how to go about opening a PDF in InDesign?? Thank you in advance! Sam
-
PreparedStatement 와 cursor sharing 파라메터에 관해 질문입니다.
PreparedStatement 와 cursor sharing 파라메터에 관해 질문입니다. cursor_sharing 파라메터를 EXACT 가 아닌 similar, force를 이용하면 리터럴이나 바인드 변수를 제외한 나머지 문장이 동일하면 같은 문장으로 취급하여 동일한 실행 계획을 이용한것으로 알고 있습니다. 그런데 만약 EXACT인경우 는 SQL-PLUS 상에서 select * from dept where deptno = &dept 이렇게
-
Getting error when executing mysql command in powershell.
When I run this it gives me an error and I'm not sure if I'm doing it right. Can someone look at my code please and thank you. It has a problem with the commandtext and is giving me this error: Exception calling "ExecuteNonQuery" with "0" argument(s)
-
How to call a method in Viewimpl from transient attributes value
Hai, I have a method in ViewImpl say validate().I need to call this method from an transient attributes value where value type is expression.i used adf.object.validate() but its not working. Can any one help me Thanks in advance