No drilldown option for Formulas in structure

Hi Experts, Could you throw some light on the following issue.
My char structure is as follows,I have a grouping done on GL and when i drill down I shd see the GL only for selections and not for formula i.e. the formula should not drilldown and show GL's.see the below example.
Example,
A - SALES(GL grouping)
B - TAX &DUTIES(GL grouping)
C - Formula (SALES + TAX & DUTIES)
For summarised report ,the above display is OK but when I drilldown and see GL level data,is there anyway to supress and make the formula as static(no drilldown for formula).
Kindly guide me if there is any way out .
Regards
Raja Premsingh

I think you only want to see the values for key figures A, B and C in the result rows and not in the details when you have a drilldown on GL, am I right?
What you could do, is create a new calculated key figure to determine the number of GL's. You could use a formula variable with replacement path for constant 1 on GL, or created a a copy of key figure A with aggregation level GL and counting all values <> 0.
Once you have a column with the number of GLs, create a formula like ( number of GLs > 1 ) * key figure A. This way, only the result rows will show values.
Kind regards,
Alex

Similar Messages

How to set optional for table structure in functiona module

hi experts,
as i have small doubt regarding
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure ....
reagrds prabhanjan

Ignoring the TABLES/CHANGING/EXPORTING argument...
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure
Why not? There's no issue with marking a TABLES interface parameter with 'Optional' and publishing the function module or function group as a web service...

Options for Org Structure drill down.

Hi
We are working on an issue to allow Managers and Supervisors to generate reports based on their Org Structure. This is a BSP application that can be accessed over the SAP Enterprise Portal.
We currently have implemented the functionality to "Select Blocks" by implementing the HTMLB Table View Tag.
We have also added some javascripts to enable us to select blocks so that the users do not have to select each node and end node manually.
However, with this the entire org structure shows up exploded showing all nodes.
For some managers, this list is quite long and difficult to navigate through as it cannot be expanded / collapsed!
We would have preferred to implement the Tree and Tree Node HTMLB tags. However the SAP documentation for HTMLB tags (Tree and tree nodes) points that the Tree element is not intended for displaying tree structures with thousands of nodes and end nodes. Also the tree should never contain more than 30 - 50 entries! For CXO level reporting, this limit is very easily reached / surpassed.
We just wanted to reach out to the SDN community as we are sure this is a very common issue and there will be many developers who have solved this issue.
Any ideas / leads as to what are the best practices in designing an org structure with expandable/ collapsible as well as selectable nodes?
Thanks,
Development Team.

check out this weblog,
/people/durairaj.athavanraja/blog/2004/11/21/bsphow-to-build-performance-efficient-dynamic-htmlbtree
we can load children as the user expands the node (may be in the initial load of the tree just load two level and as user expands fill its children)
though sap documentation states that it cannot be user for large trees we have been using this for out cost center group hierarchy which is 8 level deep and has over 8000 nodes/leaves and we dont have any performance issues with that
Regards
Raja

Default option for password in UME

Hi,
Is there a way that when we create new users in UME, that the default option for password management is set to "Disabled Password" in stead of "Define Initial Password".
We are using SPML SOAP message to create the users and if there is no password in the SPML messgae, the user is created, but no logon is possible as the system expects that you should have a password.
We will like to avoid sending in the password as part of user creation process, as these users will have to be created with no password. These users will never do a basis authentication, but are needed for SSO using HTTP header variable..
Thanks,
Vikrant sud

Is this a portal or what?
On the ABAP side this is possible, so I would expect the Java APIs to offer the same.
Looking in the PASSWORD structure is the wrong place, try the LOGONDATA (if it is done the same way). If you activate it in the call it should delete the PASSWORD regardless.
Sorry, I have an ABAP mentality... but consistent APIs make it easier (to have to understand less concepts) and SAP increasingly does this.
Cheers,
Julius
Edited by: Julius Bussche on Nov 19, 2009 9:47 PM

How to extract data into the set-up table for 2LIS_06_INV LIS structure

We are using ECC 6.0 and SAP BI NW 2004S. I activated the 2LIS_06_INV (Invoice Verification) structure. Interestingly, I don't see any Events under this structure (MC06M_0ITM) - my understanding is the events usually determine what type of data is generated for a given structure.
I see Invoice Verification when I use the Inventory Management -Perform Setup option when doing the set-up tables. However, when I use this option, I get a message saying " No extraction structure active or no BW connected".
Can someone list the pre-requisites and the steps to load the set-up table for the 2LIS_06_INV structure.
Thanks,
Sanjay

1: RSA5 Activate Data Source
2: LBWE Activate datasource again
3: SBIW Fill setup table 'Settings for Application-Specific DataSources (PI)'-> 'Initialization'->'Filling in the Setup Table'->'Application-Specific Setup of Statistical Data'->'Invoice Verification - Execute Reconstruction'

Issue in Result row display for free char drilled for query with structures

Hello All,
I have a structure in the Row with various calculated subtotals for e.g:
Total Interco sales(selection on some G/L accounts)
Total ext sales(selection on cost center+group accounts)
Total Revenue (formula in structure) = Total interco sales + Total ext sales
In the column I have the key figure called balance.The net effect of this is in the report out we have :
subtotal**********balance
Total interco sales*100
Total ext sales*****200
Total revenue*******300
This is fine in the initial layout ,but when there is further drill down say on the G/l account then the account numbers are repeated for total revenue as well .For e.g
*********************G/L account Balance
Total interco sales 11100********50
*********************12000********50
*********************result --->*****100
Total interco sales**11100********50
***********************12000********50
***********************Unassi******100
***********result---->**************200
Total revenue******11100********100
***********************12000********100
************************#*************100
*Overall result -->***************** 300
However the users dont want to see the g/l account break up for the total revenue in this case.i.e if g/l account is drilled down then only the break up should be seen for total interco sales & ext sales and not for revenue.i tried using supress individual result in case of total revenue but it was not helpful.Also building something like hierarchy with text nodes isnt feasible since there are a lot of subtotals with different char restrictions.Any ideas on how to achieve this?

There isnt a way to achieve this,but as a workaround we built selection in the structure.

Here's how to use DYNAMIC tables for almost any structure (4.6C onwards)

Hi guys
I'm describing a feature here that has been around since 4.6C that is not really well known but can really simplfy programming where you need to get data into some sort of internal table and then display it either as a classical list or as al ALV grid.
This feature is RTTI which allows you to retrieve your structure, build a dynamic FCAT (Field catalog) and a Dynamic table.
Here's a really quick little program which reads 200 entries from VAPMA into a dynamic table. Any structure will work if you use the code sample shown.
To pass it to an ALV GRID is then really simple as you've already got the Field Catalog, Table and Data.
The method I'm showing below will work for almost ANY structure you care to name whether or not the fields are in the data dictionary.
I create a dynamic FCAT and dynamic table based on the FCAT and then populate it.
You can create field catalogs dynamically quite simply by using the new RTTI facility available from 4.6C onwards.
(From here it's only a small step to dynamic tables and EASY ALV grid displays)
Example to create dynamic FCAT and table and populate it with 200 entries from VAPMA
PROGRAM ZZ_BUILD_FLDCATALOG.
tables: vapma.
Define any structure
types: begin of s_elements,
vbeln type vapma-vbeln,
posnr type vapma-posnr,
matnr type vapma-matnr,
kunnr type vapma-kunnr,
werks type vapma-werks,
vkorg type vapma-vkorg,
vkbur type vapma-vkbur,
status type c,
end of s_elements.
end of your structure
data lr_rtti_struc type ref to cl_abap_structdescr .
data:
zog like line of lr_rtti_struc->components .
data:
zogt like table of zog,
wa_it_fldcat type lvc_s_fcat,
it_fldcat type lvc_t_fcat ,
dy_line type ref to data,
dy_table type ref to data.
data: dref type ref to data.
field-symbols: <fs> type any,
<dyn_table> type standard table,
<dyn_wa>.
*now I want to build a field catalog
*First get your data structure into a field symbol
create data dref type s_elements.
assign dref->* to <fs>.
lr_rtti_struc ?= cl_abap_structdescr=>describe_by_data( <fs> ).
zogt[] = lr_rtti_struc->components.
Now build the field catalog. zogt has the structure in it from RTTI.
loop at zogt into zog.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = zog-name .
wa_it_fldcat-datatype = zog-type_kind.
wa_it_fldcat-inttype = zog-type_kind.
wa_it_fldcat-intlen = zog-length.
wa_it_fldcat-decimals = zog-decimals.
wa_it_fldcat-coltext = zog-name.
wa_it_fldcat-lowercase = 'X'.
append wa_it_fldcat to it_fldcat .
endloop.
Let's create a dynamic table and populate it
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
select vbeln posnr matnr kunnr werks vkorg vkbur
up to 200 rows
from vapma
into corresponding fields of table <dyn_table>.
from here you can pass your table to a GRID for display etc etc.
Cheers
Jimbo

Thanks for the info.
I went to their web site and also Googled.
I found a great review on their photographer's books on nikonians.org
They use an HP/Indigo Ultrastream 3000 digital offset press for all hardcover books, which is GREAT!
I did sign up and requested the 45 day trial "photographer" account.
I am curious if Shared Ink offers a size that matches the ONLY current book size from Aperture, the odd 8.5x11.
In the above review, I saw that Shared Ink offers a 12x12 book.. very nice! Except you will need to design that one in CS2
So then, all that Apple really needs to do is simply add the ability to select/create custom book sizes. Then we don't need a printing service from Apple, as there are plenty of options out there, and more arriving on the market each month!

How to create a New Tranport Request for changed Extract structure

How to create a New Tranport Request for changed Extract structure ?
Hi Experts,
I have a FI AP Generic Datasource containing extract structure with appended fields.
It has already been activated and transported to Testing System.
Now, I am to create a new transport request for this DataSource and Extract structure.
I do not want to delete and recreate the Generic Datasource.
I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
Please let me know the steps
URGENT

Hi Dev,
Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
Hope it helps...

Default multiple values for formula variable on variable selection screen

Hi All,
Suppose 'A' is formula variable with customer exit as processing type then i want four default values for this variable eg: 3, 6,9, and 12 as selection options, when we will execute query user can able to pick any one of the default value.
is it possible in BEx for formula variables?
I also tried with ABAP code in 'cmod' t-code, but it is not working properly for 4 default values....but for single default value, code is working fine.
I am using following code ::
When 'ZCSIMCTB'. // variable name
IF i_step = '1'.
CLEAR : l_s_range.
l_s_range-low = 3.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR : l_s_range.
l_s_range-low = 6.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR : l_s_range.
l_s_range-low = 9.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR : l_s_range.
l_s_range-low = 12.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
Thanks in advance

Hi Sankar,
Thanks for reply...
With single quotes also its not working.......
Also as I am using Formula Variable so by default "Single Value" is coming on Variable Details....
Regards,
NIlesh

Drop-Down-Box (F4 Input Help) for formula variable in BEx Analyzer (BI 7.0)

Hi Gurus,
is it possible to get a drop down box for a ready for input formula variable in the BEx Analyzer (not BEx Web!)?
We want to let the users choose scaling factors 1, 1000 or 1000000 (implemented via this formula variable). In the settings of the formula variable you can only choose a default value but there seems to be no option to provide all three factors in a drop down box like the ones for characteristic value variables.
We could prevent other entries in the variable pop up via customer exit (i_step 3) but the business is wishing an F4 input help like the ones for characteristic values.
Thanks for your help,
Marco

Hi Macro,
Its not possible to get drop down box for a ready for input formula variable. Because it is possible only for characterstic value variables but not formula variable.u donnot get any drop down box like ready for input for formula variable.
Regards,
Premalatha.C

How to make default personalization options for users

Hi all,
How can I make default personalization options for users, so that those will the default options when the user opens the portal BSP applications. Those will be the standard, at later point of time if they want they can personlalize some other fields, but earlier fields will be the default fields and user cant be able to change them.
Thanks
Murthy

Hi Murthy,
If you use IMG (crmc_blueprint_c) to customize PCUI appl than you can use the personalization feature. If you select 'Not in List' in the IMG for the field in the fieldgroup structure, than this field by default will not be viewable in the List View and will not be checked as 'Visible' in the Personilzation link. So by not selecting 'Not in List' you are giving that field to be viewable and all other fields are available for users to personalize by default.
If you have maintained the 'List View' using the CRM Designer, than most likely you would lose the above feature, as SAP Standard code considers the CRM Designer as high level of customization.
Thanks
Harsh

MSS Time Approval - multiple (different) selection options for manager?

Hi all
I am setting up MSS Time Approval delegation in ERP2005 without workflow, leave request, nor portal development environment set up.
In this case, the customer needs to have multiple selection options for who to approve:
1. The manager's direct reports (standard functionality)
2. All subordinates, all levels down
3. Delegate's (manager or non-manager) view of a particular (other) manager's direct reports
3b. This might extend to a set of different delegation selections
4. Add or remove certain individuals
Now, getting 3. and 4. to work was simple using the BAdI (I think the enhancement spot is named APPR_CUST), method ...-edit_selection, but I am having difficulties with 2. and 3b. Now I am thinking along these lines, and I would greatly appreciate your input:
A. It seems that the MSS "Approve working time" app only loads the data selection at the entry into this screen (INIT command from portal), using the start perspective determined for example by the IMG for defining the approval profile <-> view. My debugging suggests that the view change from the drop down menu (CHANGE_PERSPECTIVE command) only picks a different way to present the same data set.
Could anybody please confirm or contradict this conclusion?
B. Is it possible to present the entire "Approve working time" section in MSS in multiple different copies so that they would all generate an INIT command? Or is it possible to copy and modify the entire MSS tab, resulting in an ESS tab, one MSS, one "D"SS, one "A"SS (well, not suggesting that the top manager is one, but you get the drift...) and so on?
If either of this were possible, it would be simple to make two modifications, one at the beginning of the FM called by the portal and one at the FM that returns the start perspective.
So far I have been trying to catch and alter the CHANGE_PERSPECTIVE command into an INIT in the back end, but the Time Approval functionality is a bit too complex for me to feel entirely comfortable with this approach.
Your input is much appreciated!
Kind regards
Niclas Arndt

We too are using MSS for time approval of time entered via ESS. We are on ECC 6.0 for the backend (no enhancement packs, at least not yet), currently sp stack 10 with hrsp 24, and EP 7.0 with stack 10 for the ESS/MSS business packages. We are using the standard MSS UWL functionality for the approval, so it is workflow-based in my understanding.
In other parts of MSS, the managers can see a few levels deep in the organization structure, based upon the definition we gave for their structural profiles. For instance, in the team calendar/overview, or other team information, they have a choice for multiple levels or only direct reports. However, in the time approval application, only direct reports are shown, so if a manager goes on vacation, at present the only way to cover time approvals for that manager's employees appears to be to temporarily assign a new 'chief' to that org unit, so HR involvement becomes necessary. The manager doesn't have any method for delegating the approval or other MSS authorities. We were hoping that by allowing multiple levels in the structural profile, such approvals would "roll up" to the next level, i.e. the manager's supervisor, so the next level manager could act as a backup to his/her managers on vacation. That doesn't work, however.
We have heard that a delegation feature for MSS will be available in an upcoming release, but I haven't found any information regarding whether that requires an upgrade, an enhancement pack, a later service pack level, or what or when that functionality will be available. Does anyone know anything about that?
Regards,
Matt

DrillDown Option not Working while Export To PDF in SSRS

Hi Friends,
I worked on ssrs report used DRILLDOWN option. When I export drilldown report to pdf, with groups collapsed, pdf shows no data and no +/- on the left of the group name. Basically, it shows no data and no option to drilldown(only header)s .
When this report is exported to Excel, it is perfect and works exactly as it would in VS2005.
Any setting to make sure an expanded report is exported to pdf? Or do i manually expand all drilldown options and then export?
Thanks in advance.
Thanks and Regards,
LuckyAbdul

Hi LuckyAbdul,
From the
document, we can know that “Dynamic show and hide elements are not supported in PDF. The PDF document is rendered to match the current state of any items in the report. For example, if the item is displayed when the report is run initially, then the
item is rendered. Images that can be toggled are not rendered, if they are hidden when the report is exported.”
So just as Visakh said, this behavior is by design. If we want to see entire data in PDF, we should expand the node (click the plus signs (+) in the report) to show the demanded detail data ahead, then export the report to PDF.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Best export option for Sound Designer

Hi everyone,
I am working on a new short film and I am working with a Sound Designer and composer. We want to create a 5.1 mix for the film (which I have never done before). So I am trying to figure out what would be the best export option for him to work with to make his life easier.
Providing him with just a ProRes export won't help him match up to my cuts in the time line since he doesn't use FCP X. So my thought is that we will have matching files and folder structure for both video and audio before I start editing. But what I am not understanding is once I have a complete rough cut, how do I get him a cut list so that he can totally match up my cuts with the same audio files on his system?
Any advice?
Thanks.

See this pic for an example of how my exports turn out:
http://www.brettmichaelwiesman.com/temp/qtexport.jpg
First off, the titling style is not ideal for DV (or DVD). That is, your font should be a bit fatter (or, at least, bold) and perhaps 1-2 point sizes larger. (This is all because the DV codec makes titles look like s--t if the font size is small and narrow)
Also, for your LiveType files, make sure FCP is interpreting your alpha channel correctly. For every LiveType file placed in your timeline, select it, then press Command-9 to bring up the Item Properties dialog. In the column for Alpha, make sure it says it says Black. If, for instance, it reads Straight, Control-click [right-click] on Straight, then select Black from the contextual menu. You should notice your text 'popping out' a little more. You'll have to re-render, of course.
Also, in QuickTime Player, press Command-, (that's  + comma) to bring up QT's preferences. Make sure that the box for Use High Quality Video Setting when available is checked. (In order to get this working, it's probably best to set this, then restart QT - or close, then open, all movies). With the High Quality flag always used, your titling should always look better in QT player. (That is, there is no change made to your actual file, but at least when previewing, you'll get a better idea of things)
After you've made these changes, export as you were (Current Settings) and let us know if you see any improvements.

Delta Option for Generic Data Source

Hi ,
My requirement is Delta Option for Generic Data Source. This Data Source is getting Extracted from Function Module.
For this requirement I have followed below steps.
1) Added the Field (On which Delta gets enabled) to the extract structure by using Append Structure
2) Enabled Delta On this Filed.
3) If I try to save the Data Source, I have gone to a screen where I am able to see 4 coloumns
a) Selection
b) Hide Field
c) Inversion
d) Filed Only known in User Exit.
By default Hide Field and Filed Only known in User Exit check boxes have been checked.
Would you please tell what is the use of Filled Only known in User Exit check biox.
As My data source is getting the data buy using the Function Module, Shall I uncheck this Check Box.
Thanks and Regards,
K.Krishna Chaitanya.

Hi Krishna,
The "FIELD" should be checked if we write any enhancement in CMOD, so that system can identify that this particular field has enhancement written to it,
But even in real time systems i usually find that even though we check the "FIELD" or not , there is no effect .
So Checking "FIELD" or not will not impose any isses .
Regards,
Krishna

No drilldown option for Formulas in structure

Similar Messages

Maybe you are looking for