No feedback from resolver after upgrade from 7 to 8.2

Hi,
I am running a Pac Sci servo motor as a stepper (with step and direction signals) and
using the resolver as feedback (analog channel 1) with a PCI 7344 motion card.
I have updated NI Motion device drivers, firmware, and LabVIEW 7 express to 8.2.
In measurement and Automation I reconfigured closed loop stepper using analog feedback.
1-D interactive:
I command a move, the servo moves, but the position display does not change, only the following error increases.
The servo movements are in the correct direction but result in different magnitudes with the same movement command.
The system worked fine on a different computer before upgrading the motion drivers, firmware, and Labview.
Where do I start?
Matthew

Hi,
If the position doesn't change this means that the board can't read the feedback signal for some reason. If your position stays exactly at 0 with analog feedback enabled please check the cabling for your resolver (is it powered?). Please check if the ADC is working correctly by reading it in an application (please unmap it from the axis before).
You could also try to find out if it works correctly when you rewire your motor/resolver to work with another axis.
Please let me know how it works
Best regards,
Jochen Klier
National Instruments Germany

Similar Messages

Emailing not working after upgrade from 3 to 4.1

We have emails going from apex applications that we sending emails to outlook.
After upgrade to 4.1 they don't send emails as they used to do in version 3.
System admin verified and all configurations look good..
Anyone has similar experience
Appreciate any feedback
Kp

Hi Kp,
please provide more information:
*) Oracle DB version (has this changed due to the upgrade)?
*) Which Oracle user is used to send the emails?
*) Are you sending the emails through an application process or through a background job?
Please post the exact code you are using.
Which version 3 are you talking about, 3.0, 3.1 or 3.2?
Please be as specific as you can be and provide as much context information as possible. I recall that there has been a change in the security settings, especially for mail, don't remember exactly which version, though.
Do you get any error messages?
SELECT *
FROM apex_mail_queue
WHERE mail_send_error IS NOT NULL;Cheers,
~Dietmar.

Managed Server Startup failed after upgrade to 11.1.1.6 from 11.1.1.4

We tried to upgrade from SOA Suite 11.1.1.4 to 11.1.1.6.
After upgrade when we tried to start our managed servers we get the below error. Did anyone ran into this? If so how did you resolve it?.
Its still referring to some Weblogic 10.3.4 libraries. We were not able to find out where..
<Mar 22, 2012 3:21:29 PM CDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub
java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub
at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:610)
at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:577)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:482)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
at weblogic.jndi.Environment.getContext(Environment.java:315) Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:247) Truncated. see log file for complete stacktrace>
The WebLogic Server encountered a critical failure
Reason: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
Exception in thread "Main Thread" java.lang.AssertionError: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:145) at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:124) at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLInitialContextFactoryDelegate.java:427) at weblogic.jndi.Environment.getInitialReference(Environment.java:245) at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:1083) at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:429) at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:415)
at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:206) at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:482) at weblogic.Server.main(Server.java:71)
Thanks,
Jp

Hi,
I found an oracle note with the next solution:
Add -Xverify:none to the JVM Arguments in the WebLogic console if you're using Node Manager to start managed servers:
1. Go into WebLogic Console
2. Navigate to Environment> Servers> [Sever_name]> Server Start> Arguments
3. Add -Xverify:none to the arguments
4. Restart the WebLogic server
5. Retest the issue.
6. Migrate the solution as appropriate to other environments.
Or
If you're not using Node Manager to start managed servers:
Edit the WebLogic start-up script to add -Xverify:none to the JVM arguments
See if it works for you
Arik

"The query was cancelled" error after upgrade from 10.1.3.3.3 to 10.1.3.4.2

Hi,
I was using OBIEE 10.1.3.3.3 /. After upgrading to 10.1.3.4.2 , the queries are not running ( long running queries alone) as expected. and so all the campaigns iwh tlong running queries are cancelled and the error message is seen in the xml log in Marketing jobs management.
We have upgraded the OBIEE version from 10.1.3.3.3 to 10.1.3.4.2 yesterday after which the connectivites have been checked with SQLPLUS and they are working fine. But when the campaign has been loaded, the Analytics have received the request for the segment query and after longer run, the task has been cancelled with the error message "The Query was cancelled as mentioned below in the Job Stats
<jobStats>
<jobID>2</jobID>
<jobType>WriteListFiles</jobType>
<jobUser>userid</jobUser>
<jobState>Error</jobState>
<jobTotalMilliSec>1h 41m 21s 160ms</jobTotalMilliSec>
<jobStartedTime>2012-03-22T08:06:13Z</jobStartedTime>
<jobFinishedTime>2012-03-22T09:47:34Z</jobFinishedTime>
<jobIsCancelling>N</jobIsCancelling>
- <exception>
<message>Job request of type "WriteListFiles" failed.</message>
- <exception>
<message>Error executing the list generation SQL.</message>
- <exception>
<message>Error in executing cursor for WorkNode (Id:0)</message>
- <exception>
<message>The query was cancelled.</message>
</exception>
</exception>
</exception>
</exception>
</jobStats>
Please let us know the suggestions
So far, the unaccessedtimingrunoutminutes tag has been tried to set 50 under ODBC tag in instanceconfig.xml. and the defaulttimeoutminutes has been tried to set to 150 in the same instanceconfig.xml.
along with that the rpd changes are done. For all the users apart from the Administrator, the timeout has been changedfrom 10 minutes to 150 minutes. But still that way is not working.
The segments was fired with the Administrator login. So , if the timeout for admin login can be set, i assume that the problem might be solved. Please let us know ur suggestions here too.
If that is the case, when we open rpd , only for Administrator user and group, the Permissions button is disabled. So i want to know how to change for Admin user settings in rpd..
Please advice us on the same.
Regards,
Madasamy M.
Edited by: Madasamy Murugaboobathi on Mar 26, 2012 1:40 PM

The issue has been resolved by setting the following parameters
<UnaccessedRunningTimeoutMinutes>120</UnaccessedRunningTimeoutMinutes>
<DefaultTimeoutMinutes>120</DefaultTimeoutMinutes>
<ClientSessionExpireMinutes>120</ClientSessionExpireMinutes>
<ConnectionExpireMinutes>120</ConnectionExpireMinutes>
<UIDefaultTimeoutMinutes>1440</UIDefaultTimeoutMinutes>

Build error after upgrading from 8.2.1 to 8.5 "Error 1055 occurred at Invoke Node..."

After upgrading to 8.5, I'm getting the following error when trying to build an EXE:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 1055 occurred at Invoke Node in AB_Source_Library.lvclass:Close_Reference.vi->AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: Object reference is invalid.
I have been building this application for both Windows and Mac OS, and I even get the same error when building the .app on an Intel Mac.
Things that I've already tried:
* Mass-compiling all my code
* Created the project from scratch
* Enabled each panel of the "diagram disable structure" one at a time and compiled again
Any ideas?

Hi Travis,
Ben’s advice if definitely the best place to start. Error 1055 is a very general LabVIEW error for “Object reference is invalid.” The cause is usually a bad install where important LabVIEW function aren’t placed in the right directory or aren’t installed at all.
Charlie M. CLD

SSO and Portal down after upgrade from AS 10.1.2.0.2 to 10.1.2.3

SSO and Portal is down after upgrade from AS 10.1.2.0.2 to 10.1.2.3. All others are running fine. Any similiar experience and solution?
Thanks.
Andy

cn=XXX information is missing for the SSO Server (orasso) when going to http://servername:7777/pls/orasso/orasso.home. Is that causing the problem? If so, how can I resolve it?
Thanks.
Andy

After upgrading to IOS 7, I can only transfer songs to my iPhone 5 that I bought on iTunes. Cannot xfer songs I burned from CD.

After upgrading to IOS 7, I can only transfer songs to my iPhone 5 that I bought on iTunes. I cannot transfer songs I burned from CD. When I drag them to my phone in iTunes, my phone appears to be updating, but the songs don't show up there.
I'm using IOS 7.1.2 and iTunes 11.3.0.54. WIndows 7.
Thanks.

This has worked for many folks according to the feedback I have gotten:
Un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.

Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
machine 10.6.1. with RDC 2.0.1 (non-working)
9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
Any help would be appreciated

Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

NQSError: 59007 in OBIEE 11.1.1.5.0 after upgrade from OBIEE 10.1.3.4.1

Hi All,
We have successfully up-grade Obiee 10.1.3.4.1 to Obiee 11.1.1.5.0. After upgrade we found below error for few reports in 11g.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
*State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 59007] The length operand -1 of the SubString operator must be greater than zero. (HY000)*
Note:This issue happens only in 11g.. not in 10g
Can anyone pls help me how to resolve this issue.
Thanks in advance,
Syam
Edited by: 942658 on Jun 25, 2012 9:05 AM

From the client or the server?
SERVER:
tnsnames.ora:
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
FROM REMOTE SQLPLUS Client:
tnsnames.ora
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Client_3)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cotsdot370.cotsdot.dom)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
Thanks,
Malcolm
Edited by: user10835577 on Aug 29, 2010 12:01 PM

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

After upgrading from 8 to 9.0.1 I no longer have any search engines installed. I would like to install Google as my default search engine. When I click on "get more search engines" I cannot find Google or Bing or -

Problem with search
After upgrading from 8 to 9.0.1 I no longer have any search engines installed. I would like to install Google as my default search engine. When I click on “get more search engines” I cannot find Google or Bing or …

I resolved my issue. Renamed search.sqlite and reinstalled Firefox 9.0.1
All default search engines are now available.

Unable to print from HP Laserjet P1102 after upgrading to Mavericks

Unable to print from HP Laserjet P1102 after upgrading to Mavericks.

plz try to download the following set of drivers from the link below :::\
http://gimp-print.sourceforge.net/MacOSX.php3
This is a new set of default drivers and mayhelp u in resolving the issue.
Plz do run disk first aid after installing the driver....might suggest even before installaing.
Thanx !! for trying.

Macbook Pro will not boot from any source after upgrade

Hi,
I have a late 2011 Macbook Pro - standard issue other than more memory as I recall. It has a 750MB hard drive with more than half still free. All the checks given below are done with the computer stand-alone with no hardware attached - other than the power cord and of course WiFi.
2 weeks ago I upgraded to Yosemite having taken all the right precautions before upgrade - thanks to Take Control. It worked fine and I was getting a good experience until last Wednesday when I put it to sleep by closing the lid. Later in the day I opened it up again but only got a grey screen. After leaving it several minutes to see if it cleared I shut down by holding the on button for several seconds then tried to re-boot. The computer starts and gets as far as the grey screen then shuts down again after several minutes. Sometimes it will continue to restart after shut down and keeps doing this until I again hold the on button in until it finally shuts down for good.
I have two bootable drives - one is a cloned backup of the previous version and all the data, the other is an 8GB thumb drive with a bootable version of the Yosemite installer. For the record I also have a Time Machine backup and a second full clone backup and recovery drive on a Synology NAS device - I just haven't figured out how to boot from this device as yet.
I can get to the boot up selection screen (hold option key) and select an external drive to boot from but it makes no difference - I still get the same grey screen. Same thing if I use Command +R to boot from the Mac HD recovery partition.
I have also tried to boot into safe boot mode (hold the shift key down). This seems to slow everything down but ultimately has the same result - a grey screen.The only difference I can see is that this grey screen does not shut down after a time. Seems to just continue until I shut it down manually.
I can hold Command +V to remove the grey screen and see the action being written to the screen while logging on (white text on a blue screen) - up to a point. After some time I just get the same grey screen and it shuts down after more time. I can also use Option +D (I'm told it should be just hold the 'D' key to do this but that has never worked for me and Option +D does) to get to the hardware check and I have run this both before upgrading and after having the problem. Before upgrading I got one error - 4ETC/1/40000002. I looked this up on the Internet and could find nothing specific to identify the problem and the general consensus seemed to be it was nothing major. After upgrading and running the hardware check again (after this problem occurred) it returned no errors.
I have reset the PRAM with the same result as before - all I get is the is the Apple logo and a progress bar that increases to around 50%, then both disappear and I get just a grey screen. After a time the computer shuts down and then restarts again and goes through the same process.
I've done pretty much everything I can think of and find in books and on the Internet. Hoping that someone out there will find this problem interesting and help me to resolve it.
Tony

Problem resolved. I took the machine into an authorized repair facility where, for around $30, I had it checked and the logic board replaced. Picked it up yesterday and seems to be working OK. No cost to replace the logic board even though the machine is over 3 years old. There seems to be some sort of dispute with Apple over a class action that has worked in my favour. Great. I'm happy.
Tony

After upgrade from 4.6c to ECC6.0 F4 Help is not coming for few date fields

Hi Friends
Just now we have completed upgrade project from 4.6c to ECC6.0.
After upgrade F4 help is not working for some date fields.
For example its working in MB11,Its not working in va01,vf01 like that.
In abap side we checked ...not able to find any issues in coding level, because its a standard SAP code.
So if any solution is there to correct this issue.Kindly help me to resolve this asap.
Thanks
Gowrishankar
Edited by: gowrishankar p on Nov 17, 2009 7:25 AM

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

No feedback from resolver after upgrade from 7 to 8.2

Similar Messages

Maybe you are looking for