No HUs have been transferred for material

All,
after successfully confirming a TO for a outbound delivery using HUs am trying to do a post goods issue. But post goods issue fails for the outbound delivery and error log is saying:
E L9 605
No HUs have been transferredfor material xxx.
Any help?
thanks,
Edited by: bstar40 on Jun 14, 2008 7:44 PM

Every plant has to have at least two Storage locations. One Storage location should be activated for Handling units and the other should not be. I had only one Storage location and it was marked as Handling units managed, this was cause for the error that I had encountered

Similar Messages

VL32N - Error -No HUs have been transferred for materia

Hi,
While doing PGR in T.Code VL32N, I am getting the below error.
No HUs have been transferred for material XXX - plant- st loc
Message no. L9605
Here, my plant having two Storage locations and one Storage location has activated for Handling units and the other not activated , even i am getting the error... pls suggest how to solve

Thanks Priyaa.. in note, this error while doing LQ01.. but im doing VL32n...

I have an old Ipod 5th gen that I have been using for downloading music from my library. Upon purchasing an Ipod touch and registering it in Itunes, I can no longer sync tunes to my old ipod. How can I get that option back on my old ipod?

I have an old Ipod 5th gen that I have been using for downloading music from my library. Upon purchasing an Ipod touch and registering it in Itunes, I can no longer sync tunes to my old ipod. How can I get that option back on my old ipod?

- iTunes purchases by maybe
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- For other music you need a third-party program like one of those discussed here:
newer copy
BTW, this is the iPod touch forum.

I have been paying for two edge agreements for the past 3-4 months AND i have not gotten a reimbursment for anything...

10/11/2013
Debit Card Transaction
VERIZON WRLS 08253-01 800-9220204 CA 10/09
$92.30
On October 11th I started an EDGE agreement for the NOTE 3. I make a $92.30 payment over the phone (which is listed above). The lady said it would arrive two days after the phone comes out. It didn't show up two days after it came out and my little Droid X went dead on me. I called customer service and asked if the phone has been shipped yet. They said it has not. I asked if I could pick it up in the store instead. They said yes. They said they would cancel the shipment so I can pick it up in the store. I end up going to the store at Torrance Crossroads and I was just about to get the phone. Then sales rep was trying to force me into buying the case and charger package that was a deal with the phone for $100.I said no and he got hurt and quiet over it. 5 minutes later he comes up to me saying the edge agreement is not cancelled and they can not give me the phone. I asked if there is anything he can do or call customer service and verify because customer service told me it could be done. He said no and walked away.
I call customer service and they say that they stopped the order and told me to go back to the store and try again. I did not wanna see the sales rep at Torrance Crossroads so I go to another Verizon store on hawthorne blvd in Torrance. I try the same process and the same thing happens. I tell them to call customer service and verify what is going on. I wait for 2 hours while they talk to customer service and the financial department. They tell me they will start another edge agreement on my girlfriends line and give me the note 3 so I can use it on my line. They said they waved the fee through some promotion since I went through a lot of trouble getting the phone and I should be getting a check in the mail for the $92.30 I paid on 10/11/13.
Ever since then I have been paying for two edge agreements at $29.16 a piece. I have also been paying an extra $8 for insurance on a note 3 that I do not have. I have not gotten reimbursed the $92.30 I paid on 10/11/13. I have been calling customer service since December and have not gotten any where. Today was the last straw when the guy put me on hold and I ended up getting transferred to the sales department... What should I do? Is there anyone that can actually help my situation out. I already suspended my line and will do so for the next 5 months until this is fixed.

@Dakotaep
I am so sorry to hear of your experience with purchasing your new Samsung Galaxy Note 3! This definitely should have been resolved in your first call to us. I would be glad to review your account and ensure the Edge Agreement is corrected. Please accept my "Follow" request and send me a direct message so I can further assist. Thanks!
AnthonyTa_VZW
Follow us on Twitter VZWSupport on Twitter.

Terms of payment in IDoc E1EDK18 have been transferred: Check data

hi Firends,
In my scenario , i have to convert incoming purchase order to sales order in my system . I am able to get message from partner and idoc is created to the message bt it contains error,
tht is Terms of payment in IDoc E1EDK18 have been transferred: Check data
related to this I had gone through note 388120 - Transfer of conditions and terms of payment.
which says that i have to maintain tht entry in SMME tcode.
My confusion here is, while I tested same scenario in development , and quality server , it was not giving any such error bt in prod system i m gettin this error.
Also if some one knows more details abt this note ,let me know.
Thanks ,
Brijesh Soni

Hi Brijesh,
you are more likely to get a response for this query if you create a thread in the SD forum.
Regards
Kenny Scott
XI/PI SDN Forum Moderator

Cross-Dock: No inbound docs have been selected for planning

Hi everybody here,
I am testing cross-docking function on our DEV environment. I set the warehouse 001 as one-step crossdocking and no opportunistic cross-docking allowed, not consider FIFO. The time ref. is delivery date & time, time window is set to 72H, release time is 2H and latest relase time is 1H.
Then I set movement type 501 and 201 as cross-docking relevancy.
I created 2 TRs with movement 501 and 201 with same material and same quantities. The 501 TR's planning time is 12:00, Aug 17 and The 201 TR is 23:00 Aug 17. However, when i run LXDCK to plan a cross docking with these 2 TRs, system prompts an error message "No inbound docs have been selected for planning".
If you guys have implementation experience of cross-docking, please give me some advice, many thanks!
Leon Xiao

Hi,
I am facing a similar problem, were you able to find out the reason for the problem?
Any help is appreciated
Thanks in advance,
Mike

J1iex - All part 1 entries have been cancelled for excise invoice

Dear Gurus,
Please help me to resolve the issue, I have captured part 1 excise invoice at the time of MIGO, internal excise invoice no generated. With the reference of internal excise invoice, I am trying to post part2 excise invoice through j1iex. At that time am getting the below error.
All part 1 entries have been cancelled for excise invoice 80000 2011
Message no. 4F113
In j_1ipart1 am seeing two line items for single material document which has a goods movement direction with R & I. Would this is being cause any issue. Please advise.
Thanks & Regards,
mohdsams.

Because of account assignment, system consumes the goods automatically. Hence the issue is resolved.

All Part I entries have been canceled for excise invoice 1639 201

dear gurus
here the senerio:
excise material PO created and migo done through 103(gate entry),105(store entry)
While doing against store entry (105 mvt type) excise part1 captures
and part 2 captured in j1iex through the number generate at 105(store entry)
and posted in j1iex through internal doc number ( which generates while capturing:above step).
problem :
need to cancel the GRN.and the excise too.
grn is cancelled along with that part 1 gets cancelled.and part 2 be get cancelled while posting the
doc number (grn number 105 mvt ) in j1iex.
while posting it displays :
All Part 1 entries have been canceled for excise invoice 1639 201
plz suggest
Regards
bhanu
Edited by: Bhanu Y on Jul 12, 2011 2:28 PM

Mr,laxman
here the problem occuring
when the grn was cancelled and while canceling the part 2 problem arises.
here we will cancel grn and the internal documnet number to be posted in after grn cancelled
suggest here
Edited by: Bhanu Y on Jul 12, 2011 4:57 PM

I can not play the songs on my iphone 4s, the more they have been transferred to the cell, help please

I can not play the songs on my iphone 4s, the more they have been transferred to the cell, help please

Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in iTunes enable it for disk use, this is required for most if not all the utilities listed below so they can access the files: Using your iPod as a storage drive
The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. This is just a selection, have a look at the web pages and documentation, they are generally quite straightforward, just check for one that soecifically state they work with the iPod shufle. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
YamiPod Mac and Windows Versions
iGadget Windows Only
iPod Access Mac and Windows Versions
Music Rescue Mac & Windows
iPodCopy Mac and Windows Versions
TuneJack Windows Only
iPod2PC Windows Only
There is also manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved and was written long before iTunes 7 and Windows Vista so it requires a little adaptation as the iPod preferences are no longer in the location mention for instance but if you're interested it's posted in this thread: MacMuse - iPod to iTunes

HT201269 I'm updating from my iPhone 4 to the iPhone 5 and have been 'restoring' for 2 hours now and the progress bar still states I hae 6 hours remaining. Will it really take this long? How long should a restore take? It's a 32gb device. Thanks.

I'm updating from my iPhone 4 to the iPhone 5 and have been 'restoring' for 2 hours now and the progress bar still states I hae 6 hours remaining. Will it really take this long? How long should a restore take? It's a 32gb device. Thanks.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

In Adobe Acrobat 9 which I have been using for a long time (Widows 7) says, You cannot use this prod

In Adobe Acrobat 9 (Wndows 7) which I have been using for a long time now it says I cannot use it withoutv repairing. It instructs me to uninstall & reinstall...

I have not run into this yet with my AA9 and Win7, but have been seeing posts about it. I would try a repair before I would do an uninstall and reinstall. You might also turn off javascript for a bit in case there has been some javascript that has caused problems (ok, making wild guesses). If you do decide to uninstall, be sure to deactivate first, uninstall, run http://labs.adobe.com/downloads/acrobatcleaner.html, and remove any left over parts of the Acrobat folder. Then proceed to the reinstall and updates.
There is a question about whether being able to use it is correct, or you are just getting some message that is a spam that somehow got into your system (again, a possible javascript issue). Besides turning off javascript, you could also try isolating the javascripts to moving them to a temporary directory and seeing if one is causing the problem.

Be grateful for your help with Photoshop Elements which I have been using for several years.

Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

I am trying to download itunes to my computer, when i hit the download button it goes directly to the screen that says now you have itunes......NOTHING HAS BEEN DOWNLOADED, i have been trying for two days to download and it is not working please help!

I am trying to download itunes to my computer, when i hithe download button all it does is go to the "now that you have downloaded itunes" screen.....NOTHING HAS BEEN DOWNLOADED!!!!!!!!!......i have been trying for 2 days to do this, please help.....Thanks

i have the same problem, i have a windows 7 and the little screen comes up saying statues: processing additional packages help us

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you.

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

No HUs have been transferred for material

Similar Messages

Maybe you are looking for