Cross-Dock: No inbound docs have been selected for planning

Hi everybody here,
I am testing cross-docking function on our DEV environment. I set the warehouse 001 as one-step crossdocking and no opportunistic cross-docking allowed, not consider FIFO. The time ref. is delivery date & time, time window is set to 72H, release time is 2H and latest relase time is 1H.
Then I set movement type 501 and 201 as cross-docking relevancy.
I created 2 TRs with movement 501 and 201 with same material and same quantities. The 501 TR's planning time is 12:00, Aug 17 and The 201 TR is 23:00 Aug 17. However, when i run LXDCK to plan a cross docking with these 2 TRs, system prompts an error message "No inbound docs have been selected for planning".
If you guys have implementation experience of cross-docking, please give me some advice, many thanks!
Leon Xiao

Hi,
I am facing a similar problem, were you able to find out the reason for the problem?
Any help is appreciated
Thanks in advance,
Mike

Similar Messages

  • Message no.3W272 No employees have been selected for UIF declaration genera

    Hi
    Please help.
    When running program RPCUIAW0 -South Africa UIF Declarations I get Message no.3W272
    'No employees have been selected for UIF declaration generation'
    Does any one know why UIF report has been running succesfully for past months but now suddenly it gives this error when ran for new  payroll period this month which has payroll results with UIF therefore should not be giving me error.
    Thanks

    Hi,
    I am facing a similar problem, were you able to find out the reason for the problem?
    Any help is appreciated
    Thanks in advance,
    Mike

  • I am unable to print a pdf from a website through Adobe Reader on my mac. It keeps telling me that no pages have been selected

    I am unable to print a pdf from a website through Adobe Reader on my mac. It keeps telling me that no pages have been selected - I have uploaded the latest version of Adobe with no luck and have never had this issue before !

    Hi bengaunt ,
    Thank you for posting on the Adobe forums, you can try printing as an image.
    Open the file>Print>advanced>check the box "print as an image" OK
    Thanks,
    Vikrantt Singh

  • SAP authentication plug-in needs to have been selected during the installation

    Can anyone help me with an issue I have with the SAP authentication setup please. Unfortunately our BI 4.0 SP4 installation was installed without the SAP authentication being selected. On the setup document I have it says that the SAP authentication plug-in needs to have been selected during the installation. Does anyone know if it is possible to set this up retrospectively?
    The document can be found on the following link. Setting up the SAP plug-in - Business Intelligence (BusinessObjects) - SCN Wiki
    Thanks
    Simon

    Hi Simon,
        As Sebastian said, this is a default installation, but you must select the correct one that you need, I guess that Enterprise is the default one.
    Regards

  • It says The Document Cannot Be Printed  No Pages have been selected to print

    How come when I try to print a PDF file it takes a long time to flatten and then says "The Document Cannot Be Printed" and then "No Pages have been selected to print"

    What is your operating system?  Reader version?

  • Assigning View permission to all the users that have been selected in contact selector - SP 2010, InfoPath 2010

    I have a SharePoint InfoPath 2010 browser form with item level security. Only submitter
    and approvers has access to the form.  This form contains a people picker that is populated with the names of attendees
    for the meeting they attended (which
    I am able to store in Field2 below). I want to allow attendees to be able to view (grant view permission) the InfoPath form. Field 2 has the users in form of domain\user1;domain\user2; etc. Following the below step, I am getting error when I ADD or REPLACE
    permission on current item. How do I go about assigning view permission to all the users that have been selected in contact selector?
    Jitu

    Hi ,
    i understand that the text box and the people picker hold multiple user names and you want to grant user permission based on the user in the text box.
    I have a test based on your description,the results are: When there are multiple users in the text box, the workflow will throw an error'Error Occurred'.It is the same with the people picker column.
    You need to limit the peopel picker to only allow to select one user,in this way the text box will only hold one user.Then you can use the people picker or the text box to grant user permission.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • TPM82 - Portfolio Transfer - No suitable positions have been selected

    Hi SAP Gurus,
    I've been trying to activate Portfolio Transfer (TPM82) but I can't seem to succeed when I try to test.  Keep on getting this message "No suitable positions have been selected".  I already created update types and assigned it but still to no success.  I'm not sure if the update types I made are correct.  Please help me on this.  Please provide correct update types and pre-requisite set-ups in IMG which I could do.  Please be specific and don't generalize.  It's really hard to understand.  Kindly advice as well if there are pre-requisite process as well that the users need to do before using TPM82.
    Your utmost help would be truly appreciated.
    Thanks so much.
    Regards,
    Raymund F.

    I had checked the online help.  And tried to follow the steps but still not working.  Im not sure if I am doing the right thing.  Can someone please feed me with screenshots of a sample correct setting.  I'm not sure where to put the portfolios.  Will it be on the differentiations or would I need to create a term and assign to the differentiation.  please help.  My email add is [email protected]
    ● You have differentiated your securities positions according to portfolios. These settings are made in Customizing for the Transaction Manager by choosing General Settings → Accounting → Settings for Position Management→ Define and Assign Differentiations. Enter the portfolio when defining a differentiation and then assign the differentiation to the respective accounting codes.
    this is the phrase from the SAP help that I'm having a hard time interpreting.
    Please help.
    Thanks.

  • BADI error-higher-level members have been selected

    Hi,
    1. When i select all in the Select input it is displaying warning messsage as Parent member is selected.                         
    2. So, Instead i am trying by selecting all the members irrespective of hirearchy manually and  not getting any errors and data is flowed succesfully.
    environment sap bpc nw 7.5 sp04
    we use the extraction BAdi /CPMB/EXPORT_TD_TO_BADI and use a                                                                       
    SELECTINPUT statement to select only lowest level members of the                                                                   
    hierarchical dimension PROFITCENTER. As long as we use <ALL> as                                                                    
    selection, we get error messages indicating that higher-level                                                             
    members have been selected. Since we use SELECTINPUT we would expect                                                               
    not to receive such warnings. Also there are no higher level members                                                               
    passed through the Extraction BADI in IR_DATA tabel ... As a workaround                                                            
    the i always has to manually select all profit center
    Regards,

    Hi SSK,
    If i understood your question correctly, There must be some property by which you can select all the members i guess.
    I think ,the error is because parent members are  selected  when you give select all. Since in BPC , they dont store any data or cant be manipulated, You could use some propert values to select the required profit_centre.
    Example
    Entity  dimension
    IDs               Profit_Ctr             Input _ Indicator
    Abc
    XYz               Y                                N
       Xyz1           Y                                Y
    This way your code could reflect   Select  Entity where  Input indicator ="Y", Profit_ctr = "Y"
    Hope this helps
    Thanks,
    sridhar

  • CRMC_ACTION_JOB 0 Actions have been selected

    Hi Experts,
    I have created an Action under an existing Action Profile in CRM 7.0 and 7.1. But when I start the CRMC_ACTION_JOB I have this error: 0 actions have been selected. Debugging the program RSPPFPROCESS we discovered that the actions are not in the table PPFTTRIGG.
    The Action have been assign to an Alert Category and to an Action Profile. The Action Profile have been assigned to a correct Date Profile.
    I have configured the same stuff in an other SAP CRM system and it is working.
    Could you please help me on this?
    Thanks in advance

    Hi,
    Welcome you post on the forum.
    However, this forum is dedicate to SAP Business One users only. There is no link to SAP CRM. Please close your thread and post on a proper forum.
    Thanks,
    Gordon

  • Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?, Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

    Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

    Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
    If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
    http://www.etresoft.com/etrecheck

  • AFS ARun: sales order not been selected for the allocation run.

    Hi,
    I am setting up the Purchase-to-Order (similar to Indiv PO item sales order) Process for SAP AFS.
    When doing the Allocation Run (trx J3AT) after Goods receipt of Sales order stock, I get an error that ARun terminated because no requirements were selected. The delivery check report (/AFS/LIEF_CHECK) indicates that the sales order has not been selected for the allocation run.
    For this process, I have set-up an Allocation type with
    1.     Requirement selection that does not exclude MTO/PTO orders
    2.     Set-up stock selection which includes physical stock type for MTO/PTO orders to the customer special stock MSKA with the segment KALAB.
    Can someone suggest what I may have missed?
    Regards,
    PD

    Hi Pankaj, I have same exact issue. How did you fix this ?
    Thanks,
    Mahesh

  • HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2.  But no matter what I do or try, it doesn't work.  What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

    I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2.  But no matter what I do or try, it doesn't work.  What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good.  Once I disconnect the Express, everything is good again.
    I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension.  Most of the time I get an error trying to update the Express.  But when it seems to be set up perfect, the entire house can't get to the internet.  Just when it looks right, it is so wrong.
    If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it.  I'm left to the conclusion that the Express is faulty.  I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

    I finally got it working.  I was trying to set it up ethernet.  My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode.  So everything I initially tried always resulted in 'wireless'.  Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it.  So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
    So here's the weird part.  When I finally tried 'continue' (vice manual), I would get 4 options.  One would be 'ethernet' extended.  So I would select it, it gave me green lights, all looked good, and still the same problem.  This is when I got frustrated.  I thought I had exhausted all possible combinations.
    But somehow when trying continue again after another restore, I only got 3 options.  One was the same ethernet extended option (can't remember what the missing 4th one was).  And this time it worked - it gave me the big green circle with the checkmark saying it was successful.  I don't know what I did different, but I know now that it won't work if 4 options come up to choose from.  It will work if only 3 options come up.  And success if only verified by the big checkmark.  Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
    As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it.  Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with.  It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
    Thanks for the response.  I really do appreciate it.
    Aiport Extreme Gen5 - internet access and router
    Airport Express Gen2 - connected via ethernet, extending my wireless
    - configured while connect directly to the Extreme, but now on a switch (16-port hub)
    Using Airport 5.6.1
    1) Restore Defaults from Base Station menu
    2) Following restart, Select Continue
    3) Of the 3 option presented, select 'ethernet.... extend network...'
      - if 4 options are present, may not work
    4) Wait for the green circle with the big white checkmark.
    5) Connected Express to the switch where a cable went to other end of house - works.
    Dead-zone went from 2mbps to 24mbps.
    I probably spent 4 hours chasing my tail in anger.  The correct way took about 5 minutes total.
    Thanks again.

  • I am totally ignorant when it comes to these products.  How can I put music on my shuffle without paying for it on itunes?  Can't I find a song somewhere and where and then transfer it to my shuffle somehow.  I have been trying for 3 hours.

    I am totally ignorant when it comes to these products and devices.  I have a ipod shuffle, 4th generation.  I want to find music, without purchasing a song on itunes  and then copy it to my shuffle.  Is this possible.  If so, where do I find the music and how do I get it to my shuffle.  I have been trying for 3 hours and about to give up. Please help me.

    Yes, of course.  iTunes was around before there was an iTunes Store.  And I think Apple cares MORE that you purchased an iPod, and LESS about where you get your music to play on the iPod.
    You can buy music the "old school" way, on CD, and "rip" them into your iTunes library using iTunes.
    You can download/buy music from other sources, as longs as the format is MP3 or AAC, and don't use copy protection (DRM).  NOTE:  iTunes Store music downloads do not use any DRM. 
    One example is Amazon.com. 
    http://www.amazon.com/MP3-Music-Download/b/ref=sa_menu_mp3_str1?ie=UTF8&node=163 856011
    They offer a utility called Amazon MP3 Downloader, which automatically places your downloads into your iTunes library.
    If the source just provides you with the downloaded song files, all you need to do is open a window showing the files or the folder containing the files.  Run iTunes and select Music in the sidebar, under LIBRARY.  Then drag the songs files or the folder containing the files from its window to the iTunes window, and drop them there.  iTunes will add the songs to your iTunes library.
    Once the songs are in your iTunes library, you can automatically sync or manually load them onto your shuffle.
    http://www.apple.com/support/ipodshuffle/syncing/

  • I have been trying for an hour to delete all of the photos from my iphone5.  Can't do it, except for 1 at a time.  I can't even connect it to my PC and delete them from my computer.  Why isn't this easy and intuitive?

    I have been trying for an hour to delete all of the photos from my iPhone 5.  I have googled it several times and there doesn't seem to be a solution.  Have tried deleting them from my PC. One at a time deleting is impractical - I have 1000 photos!  Why isn't this easy and intuitive?

    When you hooked up to your PC did they attempt to import? Had you imported them previously and not deleted when the import was complete?
    If you have to delete them directly on your device, you need to press the select button and just keep selecting until you have all of them selected, then put them in the trash.
    You do not need to select one then trash it, then select another then trash it. You can select as many as you like before clicking on the trash icon.
    Cheers,
    GB

  • I have been trying for 4 weeks to get my iPod to connect

    Hi, I have been trying for the last 4 weeks to get my iPod to work with my computer. I am computer literate, i built my own computer, i make games, etc. so i know what im doing when i use my computer. That being said, here is my problem.
    When i connect my iPod to the computer i hear the noise saying it is connected, and i see the Hardware icon at the bottom that shosw that it is connected. When i start iTunes it dosnt show up, i go into the options and it says no iPod connected. Then i try to go into My Computer to see if it shows up, it dosnt. So then i go into my device manager and i see that there is an iPod there, i try to reinstall but it still dosnt work. Next i tried to go into Control Pannel->Admin Tools->Computer Management. In there i click on Disk Management to see if my iPod shows up. I scroll down and there it is, Cribs Ipod. It dosnt have a drive letter, so i try to give it one but it dosnt let me. After all this i try to update the iPod but it just says that it cannot be read.
    So, next i bring my iPod to my laptop and plug it in. It works, perfectly. i update the software and it works. But my music is all on my desktop so i try everything over again with the updated iPod, still dosnt work.
    I have bought a USB PCI card for my computer and tried it on that, didnt work. Tried buying a new cable, didnt work. I have tried updateing every single peice of hardware on my computer and updating windows, none of it worked.
    I have gone through all of the support forums and FAQ to try and fig it. I have done the 5 r's and all that. None of it worked.
    I am flat out of ideas other than it being my iPod, but my iPod works with my laptop. It would be very very helpful if you could help me. I dont wanna have to go buy some other MP3 player.
    Thanks in advance.

    Try this here:
    http://docs.info.apple.com/article.html?artnum=93499
    "Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear"
    And since you are teh savvy about these sort of things, here's Microsofts support article for the drive issue:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;297694
    "New drive or mapped network drive not available in Windows Explorer"
    Good luck

Maybe you are looking for