NO LOV Appears for Invoice Formats in Projects Templates

Dear Friends,
Have any of you faced a situation where though Labor and Non-Labor Invoice Formats have been defined in Projects and records exist in PA_INVOICE_FORMATS table, the LOV does on Project Templates window shows no entries.
In case you could get a fix to it, please reply back.
Thanks

Setup the Competency Key Flexfield - Values sets and Values for each of the competency (Project Foundation BR100)
•     Set HR:Global Competence Flex Structure = Structure for BG-0
•     Find KeyFF Segment for Human Resources = Competence Flexfield
•     Setup value set for competence category – Project Imp SU – Setup/Flexfields/Key/Value Set = XX_COMPETENCE_CATEGORY
•     Setup value set for competent skill - Project Imp SU – Setup/Flexfields/Key/Value Set = XX_COMPETENCE_SKILL
•     Setup Rating Scale – prior to – need to set HR: Cross Business Group profile option to “yes” then set back to NO after completed
•     Then setup each competence below with rating scale - US HRMS Manager – Ctrl L - Compentencies
Each value must be maintained in the value set.

Similar Messages

Format of WCS template file for mac-address filtering

I am looking for the format of the template file used for WCS Mac-address filtering.
I need to know how the fields are delimited within the file.

Sample csv file :
#MAC Address,Profile Name,Interface,Description
22:22:22:22:22:22,profile8,management,cisco
00:00:00:00:00:01,myprofile,int1,First filter
00:00:00:00:00:02,,management,Second filter
00:00:00:00:00:03,,,Third filter
Note: "MAC Address" and "Description" are mandatory fields

Project Templates with Enterprise Resources

I'm using Project Server 2013 ( latets updates installed for both Client and Server)
I've created a project template and attached this to a project type. My template has enterprise resources speciified. So far so good.
Now I'm trying to create a project using this template and I'm getting some errors. (See below)
As soon as I remove the resources from my template the project creates fine.
It looks like 'rsResourceCannotAddLocalWithSameNameAsEnterprise' in the error below means that Project Server looks at the resource in the template and considers the resources in the template always to be a local resources. And of
course the resource already exists in my enterprise resources and therefore the project creation fails.
Datasets:
ProjectDataSet
Table ProjectResource
Row: RES_UID='0bb2c5b5-1716-e311-a1c1-005056992257' PROJ_UID='3121855b-f13b-e311-9f7f-005056991b52'
Error rsResourceCannotAddLocalWithSameNameAsEnterprise (2058) - column
RES_UID
General
Queue:
GeneralQueueJobFailed (26000) - ProjectCreate.ProjectAddToMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='353d845c-f13b-e311-9f7f-005056991b52' JobUID='3a21855b-f13b-e311-9f7f-005056991b52' ComputerName='13fdabbe-0ac0-4cca-b382-49d1853aec73'
GroupType='ProjectCreate' MessageType='ProjectAddToMessage' MessageId='1' Stage='' CorrelationUID='147f4f9c-ae30-b04b-aec7-382a52fa5fdf'. For more details, check the ULS logs on machine
13fdabbe-0ac0-4cca-b382-49d1853aec73 for entries with JobUID
3a21855b-f13b-e311-9f7f-005056991b52.
My questions are:
Are Enterprise Resources in templates supported?
Is there a way around this? We're trying to make it easy to select a subset of the enterprise resources available.

I have experienced this exact same thing and my situation is highly irregular.
This is with Project Server 2013.
I had an EPT with a Project Schedule that had Generic Enterprise Resources assigned and was able to create new projects without problems using the EPT from the New button in the Project Centre in PWA.
I was creating new projects to test and demonstrate Portfolio Analysis and was able to model Organisational Capacity represented by my Generic Resources and also the Surplus/Deficit element of Resource Constraints on a Portfolio. The Hired Resource Report
was failing.
A Service Pack and Cumulative update were applied to the Server and now I cannot create new projects using EPTs that have a project schedule with Generic Enterprise Resources assigned to tasks in the schedule.
I checked the error message for the Failed and Blocking job in the queue and the GUIDs were for my Generic Enterprise Resources. I deleted the offending Generic Enterprise Resources and then re-created them anew, edited the Project Template to have
these Generic Enterprise Resources on the Project Team and randomly assigned them to tasks in the schedule to generate a notional demand for work in the Project Template. I then Saved the Template in Project as a new Project Template and edited my EPT
to reference this new Project Schedule.
Same error encountered again.
Perversely I can open the Template schedule in Project Professional and do Save As and save it as a new project to the Server and that works just fine - the schedule is visible in the Project Centre and I can edit the schedule in both Project Pro and in
PWA.
My hunch is that the Cumulative Update and Service Pack which were applied to try and resolve the failing "Hired Resources Report" in Portfolio Analysis, which sadly it didn't resolve - has probably provoked this interesting challenge as it is
the only material thing to change on the Server during the time that this issue has manifested itself.
Am I the only one to encounter this?
Dominic Moss | MAPM Microsoft Certified Technology Specialist | Our Newsletter:
PM News Project Server Specialists
Project Server PRIME | Twitter:
@Twitter | Facebook:
@Facebook | Linkedin:
Wellingtone

Project Coding in Standard WBS project template

How is the project coding taken while coping from standard project template.
For example the Trandard project template is XXXzzz10
XXXzzz10-01 and so on
How will the subsequent projects be created from the templates with what coding mask.
Thanks!

hi,
subsequent projects created by using Copy Project function will be based on the key that the system automatically determines.
if you have a coding mask, the system will replace first section of the mask by the name you specify.
if system is unable to find a key, it will automatically retain the name of the standard project, if wbs with same name exists, you have to use replace function... this is similar to "find and replace" function common in office applications wherein you set the key and system will replace all elements that match..
regards...

Report for invoices project wise

Hello All,
I need a report where I can see the invoices project wise i.e (PS module and SD module)
I am looking for invoices details project wise is there any standard report which I can check that how many invoices have been raised for a particular project or a particular sales order.
Thanks in advance,
Priya

Hi
You are not getting the fields in FBL5N or not getting the value in them?
If you are not gettng the fields,
1. Go to SM30 - Table V_T021S...
2. Include BSEG-FIelds Sales Order and WBS Element as special fields
3. Generate the transport request and transport it to PRD
4. Execute SE38 - RFPOSXEXTEND in PRD client
Now when you execute the report, it should show you those fields..
BR,Ajay M

I am trying to render a movie in ilife 11. Error appears: Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (project is too large). It is only 1:39:00. Any ideas? Thanks! Marv

this error occurs. Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (Project is too Long)
I know this isn't true, as it is only 1:39:31. I have a mac with 160mb and 160 gb available. Could this be the problem? If so how can I remove some things to make room? Thanks!!

By exporting to the right format a movie of an hour and forty minutes could potentially use up 160 GB, exactly what format are you exporting to. additionally I'm not clear what you mean when you say your mac has 160 MB and 160 GB available.

Interest AP invoice - populate the Project Task

If you are calculating interest on- late invoices in 11.5.10. Is it possible to have AP populate Project and Task on an interest interest invoice using information from the overdue invoice?
Does this change in R12?
Thank you
Edited by: user547280 on Feb 20, 2013 5:20 AM

Hi
There is no way to fund the lowest tasks.
You cannot generate invoice with invoice lines per lowest level tasks, using standard functionality.
Assuming your billing is based on WORK, you could customize the Invoice Format to summarize RDL's by lowest task level.
However, if you need hard limit control by lowest task level you will need to capture the allocation of fund to tasks. That could be done on a revenue budget you maintain by lowest level tasks. In addition, develop billing extension called during GDI that will perform the fund check for each task.
Dina

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Trash the Preference file:
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
•I only use PAL (25fps)
Yours Bengt W

AED not appearing for utilization

Hi all
I am reposting the question having hopes of getting replies..
A similar question asked in this forum has also been included.
This particular case is for import trading scenario
Purchase Order is made in MM and during MIGO excise invoice is captured.Addnl CVD value 4% will be taken as AED.The same can be displayed in transaction J1IG.
Client has the requirement of displaying AED in J1IJ while capturing the excise invoice created during MIGO itself i.e, during goods inward as the same will be considered for RG23D reporting purposes.
But AED (Addl CVD 4%) is not being displayed in J1IJ for depo sales.
Also there is no field called as AED for capturing the same in J1IJ,but there are additional fields TAX1 and TAX2 in J1IJ.
BED,ECS,SEcess is transferred from J1IG to J1IJ but not AED
Awaiting all your useful feedbacks to display AED in J1IJ
similar question posted in the forum on Jul 8..
AED not appearing for utilization-Urgent
Posted: Jul 8, 2008 4:01 PM
Click to report abuse...      E-mail this message      E-mail this message             Click to reply to this thread      Reply
Hi All,
I am having input credit available for AED whereas the payable amount is not there for AED. So I want to utilise this AED amount against other payable amounts but this AED credit balance is not showing for utilization. When I have checked for other plant where AED payable is available then the AED input credit is also showing for utilization.
I have checked the CIN settings: In excise registration details for the plant, the Liable to AED option is ticked and under Account determination settings--- RG23 AED account has been assigned to UTLZ ETT.
Can anybody please suggest that what other settings needs to be done or is there any specific settings for cross utilization which I might have missed out on.
Thanks & Regards,
Antima
any inputs guys...........
Rgds
Shashidhar

Hi,
If i am correct you are referring to ADC (Additional Customs duty) in case of imports. This duty value is similar to AED (In screens it will be in AED column only) but in customization you will be using subtransaction type "IP" to differentiate AED from ADC, you need to maintain G/L accounts for Excise transaction types and subtransaction type IP, so that the duty values are passed on to those G/L accounts.
Cheers,
Santosh

Extra Line Items Appearing in Invoice

Dear Experts,
For certain Invoices extra line items are appearing which is not part of our product.
Example I have created an invoice for OPCBULK
but in invoice it is appearing as
OPCBULK -
OPC (BULK)H.2
OPC (BULK)H2
OPC (BULK)H
What can be the issue here. Please help. Thanks.

Hi,
I think you are creating invoice with reference to delivery document and in delivery document you have maintain batch split so batch split items are appearing in invoice.
Check delivery
Kapil

Parsing Issue in Filter For Date Format

Hi Folks,
I am having Parsing Issue on "Key Date" Object in Universe. See the Error and Code below for your review
Error: Parse Failed: Exception: DBD, The value entered is not valid. It must adhere to one of the following formats.
YYYYMMDD
DD.MM.YYYYState:N/A
Code:
<OPERATOR VALUE="AND"><OPTIONAL><FILTER KEY="0I_DAYIN"><CONDITION OPERATORCONDITION="Between"><CONSTANT TECH_NAME="@Prompt('Day Interval From','A','Calendar Day\LovDay IntervalBase',mono,primary_key)"/><CONSTANT TECH_NAME="@Prompt('Day Interval To','A','Calendar Day\LovDay IntervalBase',mono,primary_key)"/></CONDITION></FILTER></OPTIONAL><FILTER KEY="0P_KEYDA"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Key Date','D',,mono,free)"/></CONDITION></FILTER></OPERATOR>
This universe is created by someone else and client need to modify it with a calendar but i did not modify it yet however its already giving me the hard time. Kindly advise, any kind of help will be appreciated
Thanks

Hi,
With the information provided I cannot for sure get to the error but here is what I would check.
Firstly, I was wondering if the 5th parameter in the @Prompt can be Primary_Key. I thought it would be either free or constrained.
Secondly, please the LOV values for the @ prompt are being populated from 'Calendar Day\LovDay IntervalBase'. So I would check the date format being used there.
Third, the To and From dates are alphaneumeric and not dates, so I am not sure how the comparision would happen.
Hope this helps.
Regards,
Madhur

Eclipse environment does not appear the options "Web Dynpro Project"

Hi all,
I installed the SAP NetWeaver 7.1 Composition Environment SP03
But in my eclipse environment does not appear the options "Web Dynpro Project" and not "Development Component Project".
That is, I can not do a Web Dynpro project
I have to do some more configuration in eclipse, for example, carry some plugin?
How to do this, please help me
Thanks,
Vivian

Hi,
         I think you are suffering from the problem below.
Problem Statement:
No Webdynpro Perspective is Visible
only perspectives available are
    Debug
    Resource(default)
    Team Synchronizing
How to Solve:
There are many ways that this kind of error can occur.
1.   It may occur due to "improper installation of NWDS"
How to Check and Resolve :    Is NWDS is displayed in intalled list in Control panel? If 'yes' then it is properly installed. If 'No' then reinstallation is needed.
2. It may occur due to "installation of Skeleton alone"
How to Check:
                                  you can check if your installation includes Web Dynpro by selecting
Help->Software Updates->Manage Configurations.
When installing Developer studio 7.1 you only get the bare eclipse installation (Skeleton). You have to add web dynpro and all, after the initial install is complete.
The installer installs the kernel of the Developer Studio. The kernel contains Eclipse and a few SAP additions, but is not equipped with the SAP features necessary for the Composition Environment. In order to install the required SAP features you have to install the SAP features.
           How to Resolve:
Updating the NWDS software will resolve the problem.
Go to Help->Software Updates->Find and Install. This will install the default SAP plugins that came with your NWDS CE 7.1 setup source and also the additional updates that are needed.

PDF file is not generating for Billing Document for Invoice

Hi all,
We have upgraded our system into ECC6.0 from 4.7 version. During our Testing time, we have found the following Bug:
Bug: Not possible to get output in pdf format for Invoice type(TR code: VF02) except for all it is generating PDF output.
Can anybody help me out to find the route cause for this problem.
Regards,
Murali

Hi,
For one Billing-Invoice type , PDF is not generating. But it is generating for other Invoices.
So should i need to go through the Printer settings?
Regards,
Murali.

Child topics not appearing when clicked in parent project

Hello,
I have generated a Webhelp parent project containing two child projects in RoboHelp 9. The tables of contents appear for all projects correctly, but when I click some of the topics, they will not display, rather I get that message that my webpage cannot be found. Most of the topics work fine when clicked.
If it helps, it seems that the topics that won't display are ones that are new or have recent edits.
I've tried regenerating my projects and re-creating the TOCs, but I am not sure what else I can try. When I generate the child projects on their own, all topics work fine, it is only when merged as a child project in the main project that the topics won't show.
Thanks,
Maddy

It looks like I was wrong, it isn't just new topics, it is a mix of old and new topics that aren't appearing.
When I look into the folders of the generated merged topics, it looks like these topic files are not generating.
For example:
I generate parent project GP and its topics work fine.
I generate parent project LR and its topics work fine.
I generate project GP as a child project merged in parent project LR, several of child project GP's topic files have not generated.
I tried to move the missing files from the main GP generated folders into LR's child version of GP where they should appear, but I get this message: "Cannot move file abcd: The filename, directory name, or volume syntax is incorrect".
The topics that did generate properly, both new and old, do appear to open to the correct pages when clicked in the TOC.

NO LOV Appears for Invoice Formats in Projects Templates

Similar Messages

Maybe you are looking for