Extra Line Items Appearing in Invoice

Dear Experts,
  For certain Invoices extra line items are appearing which is not part of our product.
Example I have created an invoice for OPCBULK
but in invoice it is appearing as
OPCBULK -
OPC (BULK)H.2
OPC (BULK)H2
OPC (BULK)H
What can be the issue here. Please help. Thanks.

Hi,
I think you are creating invoice with reference to delivery document and in delivery document you have maintain batch split so batch split items are appearing in invoice.
Check delivery
Kapil

Similar Messages

  • System is generated extra line item of G/L while clearing throgh F-44

    Dear Experts ,
    When we processing clearing through F-44 , system is generating one extra line item of G/L ,  due to this system is not allowing for clearing as the message " Posting is only possible with zero balance ; correct document " is served by system.
    Actually while clearing , i am including TDS clearing document (posted via F-54) also .
    please suggest.
    Thanks & Regards
    Shailesh

    Hi
    1. First of all i have given advance to vendor with deducting TDS (@10%) via F-48
    2. after that i have raised one invoice for same vendor with deducting TDS via FB60
    3. vendor TDS clearing via F-54
    4. now when i going for vendor clearing via F-44 with taking reference from above F-54 document
    i got below error :

  • Number of line items in each Invoice

    Hi Gurus,
    I have one requirement
    i need to display one column in the Report i.e. "Line items per eachinvoice" which should give the number of line items per that Invoice
    when iam using tcode 'FB03' at ECC - Document Display it is giving
    for Doc 1111 - 2 line items
    for Doc 2222 - 12 line items
    so in the report that column should display
    2 for Doc 1111
    12 for Doc 2222
    please guide me how to do this
    Thank you

    create a formula with constant 1
    and set the exception aggregation as Total, and set the reference char as Line Item.
    Make sure you have Invocie in the report.
    - Danny

  • How to make a new line item appear in a sales order in VA01 transaction?

    Dear All,
    I am trying to create a SO with single line item with quantity 100.
    Upon hitting the 'Enter' key, if the available quantity is less than the requested quantity (say 20), it takes me to an availabilty control screen which has a push-button 'One-time delivery' on the application tool bar.
    Upon clicking on this button, it takes me back to the main screen of VA01 where I currently see only one line item with quantity 100 and confirmed quantity 20.
    My requirement here is to make two line items appear, one with quantity 20 and the other with quantity 80, once I navigate back to the main screen of VA01 after clicking on the push-button 'One-time delivery'.
    Please provide me your valuable inputs. Any kind of help is highly appreciated.
    Useful answers never go unrewarded.
    Regards,
    Sreekanth Reddy B.

    Hi Sreekanth ,
    creating line items based on the confirmation qty can be done thru config, not thru ABAP,standard SAP will gives you options to create a new line item for unconfirmed qtys.
    check with ur functional consultant or try to post in SD /APO forums.
    regards
    Prabhu

  • Not able to add extra line item in sales order - va01

    Hi friends,
    At the time of creation of sales order via va01.
    I am appending the my extra line item in xvbap. But on screen I am not able to view that extra line item.
    Could you please help me out with this problem.
    My code is given below.
    I am writting this code in MV45AFZB &
    in that FORM USEREXIT_CHECK_VBAP USING US_DIALOG.
    it_free_goods is the table in which i am having data which needs to be uploaded in xvbap.
      IF it_free_goods[] IS NOT INITIAL.
        LOOP AT it_free_goods INTO wa_free_goods.
          wa_xvbap-matnr = wa_free_goods-matnr.
          RV45A-MABNR  = wa_free_goods-matnr.
          VBAP-POSNR   = vbap-posnr + 10.
          wa_xvbap-kwmeng = wa_free_goods-menge.
          wa_xvbap-meins = wa_free_goods-meins.
          wa_xvbap-pstyv = co_pstyv.
          wa_xvbap-posnr = vbap-posnr + 10.
          wa_XVBAP-UPDKZ = 'I'.
          MOVE-CORRESPONDING wa_xvbap TO xvbap.
          APPEND xvbap.
         ENDLOOP.
       ENDIF.
    Please let me know if somethings needs to be changed.
    It will be very helpful for me,
    Thanks,
    Best Regards,
    Prashant

    Hi Prashanth,
    I believe the use of
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level
    Please check the following link which has a similar requirement
    Re: VA01/VA02  screen exit
    Regards
    Byju

  • Problem while inserting extra line item in XVBAP

    Hi Experts,
    I have to add extra line item in the Sale order through user exit.
    So i added new line item in the internal table XVBAK of the subroutine USEREXIT_SAVE_DOCUMENT_PREPARE (MV45AFZZ). Its working fine with the sales order. But when I create delivery of the same new iserted line item is not going to the delivery.
    Please give me solution...
    Thanks
    Sameer

    Hi Sameer,
    i think, you have added the line in XVBAP - not in XVBAK.
    And what's about VBEP - without an entry in VBEP, there will be no delivery note. There are also several indexes for the delivery.
    I hav'n dared to put an extra Line into the oder while Save_prepare.
    Perhaps try the bapi for order changing.
    You can get the new order-number while userexit Save. Save the need of change in an extra teble and change is via bapi with a background - job.
    Hans

  • Line items in an Invoice

    Hi,
    I understand that SAP Standard SD capabilities does not allow us to have more than 9999 line items in an invoice/sales order, I was wondering if it is possible to have around 50000 line items in a single invoice..........what is the maximum number of line items allowed in a single invoice in the most recent version ECC 6.0 ?
    In our Project the client's each invoice would have line items running into 5 digits. Would appreciate any suggestions on how to tackle this problem. Is it possible to customize this requirement in SD or would it be advisable to use sum other billing engine as a solution.
    Thanks in Advance,
    Saikiran

    Hi,
        try using BAPI for your purpose
        BAPI_SALESORDER_CREATEFROMDATA
    Regards
    amole

  • No of line item per excise invoice

    hi gurus
    please share me where to maintain  no of line items per excise invoice?
    baalakrushnan.da

    Go to IMG Path -- Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Registrations.
    Here select your excise group and drag the mouse towards right side where you can see a tab "EI Items".   Whatever numeric value you maintain here, only to that extent, number of line items will flow in excise invoice.
    thanks
    G. Lakshmipathi

  • SKB1 is displaying unrelated/extra line items.

    Hi,
    I am encountering one problem which is related to KSB1 transaction. It's displaying extra line items which are not related to actual line items . Here is the scenario
    Actual Assessment Cycle contains one segment :
    Segment1 : Sender Cost Center group CG(C1,C2,C3,C4)1---All these cost centers are associated with functional area FA
    Cost element : 942XXXX
    Receiver Cost Center C5,C6,C7,C8----All these cost centers are associated with functional area FA.
    Amount $10
    After executing the assessment cycle when go to KSB1 it's displaying the following line items
    Doc No      Celement         Val in currency        Cost center     partner cost center    Ref Doc No    f unctional area     Posting date
    76942           942XXXX            $10                              C1                         C5                       76939        FA                       09/22/09
    76939           942XXXX           -$10                             C1                         C5                                         FA                       09/22/09
    76939           942XXXX            $0                               C1                          C5                                         FA1                     09/22/09
    76942           942XXXX            $0                               C1                          C5                        76939        FA1                    09/22/09
    I don't know why it's showing the line items which are realted to FA1 and these cost centers ARE assigned to functional area FA not to FA1.Does any one know from where it's pulling this information?Does any one know how it derives the functional area here. I don't know which table has this information(COEP,COEA,CCSS...?) How to fix this?
    I really appreciate your thoughts and input
    Thanks
    Br

    Hi Shekhar,
    What is happening in the system is standard SAP behaviour.. In case you do not want Down Payments to be updated in the system, please follow the steps below:-
    1. Create a new Field status group as a copy of G067 and make it say Z067(Assets field suppressed here) and assign it to Vendor related recon accounts(Spl GL A)
    2. After this, when you create a down payment request in F-47, you will receive an error message F5 378
    3. Go to transaction OBA5, enter work area as F5 and chnage the message no 378 to Warning (W)
    This setting will not generate additional line items.
    Regards,
    Kavita

  • Automatic Payment Run - Generate Extra line items

    Hi All,
    We need to create extra line items when automatic payment (F110) is run because we need sub-fund entries.
    For example:
    Automatic payment will create:
    Vendor a/c Dr.
    Unpresented Cheque a/c Cr.
    We need:
    Vendor a/c Dr.
    Sub-Fund a/c Dr.
    Unpresented Cheque a/c Cr.
    Sub-Fund a/c Cr.
    This is a requirement specific to our organisation. We need to add these extra line items while F110 is running and before document is posted. We have checked all the user-exits for transaction F110 and didn't find anything to add this.
    Any suggestions/ideas is highly appreciated.
    Regards,
    Sougata.

    Hi Sougata.
    Need to create Substitution rules (transaction OBBH) and within those rules you can define user exits (ZGGBS000 for e.g.). In those user exits, you can split the lines based on Document type (ZP, ZV) for automatic payment clearing.
    This is a customization + ABAP intensive approach, but is a approach that is supported by SAP and I have used it in the past to split document lines at any stage in their processing. It has been a while though and I don't have any examples to give you.
    Hope that helps!
    Rishi

  • Separate line item for each invoice in payment document

    Dear Experts,
    while making payment for a vendor through F-58 for multiple invoices, the system grouping the invoices on Business Area basis and giving the line items.
    For example there are 2 invoices for 5000 and 6000 in one BA and another 2 for 4000 and 9000 in second BA, the system is generating the entry as follows
    Vendor  A/c Dr   BA1  11000
    Vendor A/c  Dr   BA2  13000
    Bank    A/c  Cr            24000
    I want the system to generate separate line item for each invoice instead of 2. How do i do it?
    But this is not happening when i am making partial payment and in that case it is generating 4 line items.
    regards
    Suresh

    Thanks for the reply
    Checked it but still it is working in the same way.
    It is a requirement for the client, is there anyway to do it?
    Regards
    Suresh

  • Hide line items on an invoice

    Is there any way to pick and choose or define which line items will appear on an invoice?

    hi,
    I think if i am clear you want to hide some item that it should not print in the PLD is it correct.
    if so please create a UDF in Marketing Document in row level whether this item should print in the PLD are Not...
    If you do like this it is possible....
    in the PLD you have to use formula field and check the UDF created is 'Y' then print if it is 'N' not to print all the relevant information in the row....
    Regards
    Chidambaram

  • Read only account line item appears writable in the webform

    Hi All,
    We are using Hyperion Planning 11.1.1.2.We have a line item called "Salary" under account which is set to read only.Its parent "Compensation" has the security set as IDesc(writable).
    The line item Salary is used in 2 forms.In one form it appears as readonly and in the other it appears as writable.Both the forms are identical except for the change in member in custom dimension for which security is not applied.
    Ideally this line item has to appear as readonly.
    Can anybody throw some light on this issue?
    Thanks in advance,
    Malini

    Hi,
    Can you just try this,edit the first form that works, do a save as and give it a name, change the custom dimension member. save. run. Is it the same?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Withholding Tax line item in Vendor Invoice (F-43)

    I am implementing EXT Withholding Tax for a client.  I have made all the settings but while doing the invoice after selecting the withholding tax codes for the vendor, system is not showing any line items for the withholding tax. 
    I have made the settings like this:
    Defined business place, section codes, withholding tax keys, tax types, tax codes, applied the tax codes in the vendor master with 'liable' tick, defined in the tax code the posting indicator 1 for posting separate line item and activated the Ex Withholding tax in the company code.  I have also made the field status of withholding tax as optional for posting key as well as FSV for GL accounts involved in the postings.  Also made the vendor account group field status as optional for Withholding tax postings.
    I am not getting where I have missed.  System is also not shooting any error.
    Please share your views.

    Hi,
    Did you do Configuration steps of Extended Withholding Tax(EWT) as follows.
    1.Define withholding tax type for invoice posting
    IMG----->financial accounting>financial accounting global settings>withholding tax---->
    Extended withholding tax-->calculation>withholding tax type--
    >define withholding tax
    type for invoice posting
    2.Define withholding tax type for advance posting
    IMG----->financial accounting>financial accounting global settings>withholding tax---->
    Extended withholding tax-->calculation>withholding tax type--
    >define withholding tax
    type for payment posting
    3.Define withholding tax codes
    IMG----->financial accounting>financial accounting global settings>withholding tax---->
    Extended withholding tax-->calculation>withholding tax codes--
    >define withholding tax
    codes
    4.Define formulas for calculating withholding tax
    IMG----->financial accounting>financial accounting global settings>withholding tax---->
    Extended withholding tax-->calculation>withholding tax codes--
    >define formulas for calculating withholding tax
    5.Assign Withholding tax type to company code
    IMG-->Financial accounting--->financial accounting global settings>withholding tax----->
    extended withholding tax-->company code--
    >assign Withholding tax type to company code
    6.Activate extended withholding tax
    IMG-->Financial accounting--->financial accounting global settings>withholding tax----->
    extended withholding tax-->company code--
    >activate extended withholding tax
    7.Assignment of accounts for automatic posting-----OBWW
    IMG---->financial accounting--->financial accounting global settings>withholding tax--->extended withholding tax>postings>accounts for withholding tax--
    >define accounts for withholding tax to be paid over
    8.Maintain company code settings for india
    IMG----->logistics-general--->tax on goods movements>India>basic settings--
    > maintain company code settings for india.
    9.Assign tax codes in vendor master----
    XK02
    Regards
    Venkat

  • Billed line items appearing again

    Dear Expert,
    We are using SAP 4.6 Version, Delivery has been created with four line items and two line item has been billed and accounting document also partially cleared, when we go for the invoice for rest of the line items in the delivery document, system has given all the 4 line items once again in VF01. that is Already billed line item also coming again for billing, Please clarify the same for sort out this issue,
    Billed two line item status shows completly billed, and how does those line items coming for again billing in VF01
    Please help us the same
    Thanks and Best Regards,
    Muralidharan S

    Hi Murali,
    Please check does anybody cancelled the invoice which created by you before?
    and also check what is the status in order for those two item which already billed in the previous invoice.
    Regards,
    MT

Maybe you are looking for