No message alert

i no longer recieve text alerts and have to go into my inbox 2 check if i have any texts, its so annoying! does anybody know of a way to fix this as i have tried everything :s

If you tried evrything(setting to factory default, format, re-installation of FW) your only option is to visit Nokia Care Center!Message Edited by android on 09-Nov-200708:22 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

Text message alert- turn off or modify

In spite of some other comments on this topic, it is not easy to find how to modify the text message alert in the E71 manual. I have been awakened several times by amber alerts during the night. When I tried to find how to turn off the message alert in the manual, I could not find it. I emailed Nokia and the following (modified a little) is what I received:
To turn off or change text message alert tone:
In response to your concern, we would like to inform you that you can change the message alert tone of your device.
Please refer below for the steps:
1. Select Menu
2. Select Tools
3. Select Profiles and to change the message tone
4. Select current profile if not already selected
5. Select Options
5. Select Personalise
6. Select Message alert tone (page to off or vibrate if preferred)
Problem solved! I hope this helps some of you having the same problem.

I think this is what you are looking for.
http://www.wireless.att.com/cell-phone-service/services/services-list.jsp?catId= cat320008&LOSGId=&catName=Parental+Controls

Text message alert sound

I have a new LG Revere. When I receive a text message, the phone makes some sort of alert vocal sound. I can set the text message alert ring tone, but how do I turn off that alert vocal sound?

This question, and another regarding a "voice" or "vocal" alert, leads me to believe you have Voice commands enabled. I'm not sure where this is on the Menu system for the Revere - explore Menu, Tools, Sounds, Voice Commands, Alerts - see if there is a setting for those to be toggled on or off. You may also look in your user manual for those keywords to see if there is anything there that will lead to a way to turn these off.
** Update - Page 65 of the user manual has info on the Voice Commands and turning the prompts to Readout/Readout + Alerts/Tones only I think you want tones only....
http://cache.vzw.com/multimedia/mim/lg_revere/revere.pdf

Is there a way to turn off the message alert "Cellular data is turned off for _____"?

I turned off cellular data for about half of my apps so I don't go over my data limit (Thanks AT&T). Now every time I open these apps a message alert pops up saying "Cellular Data is Turned Off for _____. You can turn on cellular data for this app in Settings" And it gives two buttons, "Settings" and "Ok".
If it were only a few times, I wouldn't care about closing this message. But now that I have to do it like 20-30 times a day, it has become SUPER ANNOYING. Seriously Apple, how do I turn your stupid message off??? I TURNED OFF MY CELLULAR DATA FOR A REASON, please stop reminding me of what I already know.
AND the worst part is, when that message pops up it locks the phone so the home button doesn't work. Pretty lame software feature in my opinion.

There is a fix for this! I was about to jailbreak my phone to cure this issue, but found the answer on another thread.
Go to settings/notification center. Select the app in question and turn the slider for "allow notifications" to ON. Turn off the sliders below for sounds, etc. Now it shows up in the notification center separately (or seemingly not at all) and not on your screen when you switch to the app. Good luck!

Message Alerting for PI 7.1 with Solution Manager 7.1

Hello together,
i am trying to get message Alerting of the SAP PI 7.1 to the solution manager 7.1 Alert Inbox (PI Monitoring).
I cant find a how to or something.
The following two options are in my mind:
1. implement in RZ20 an Monitor for PI-> create alert categories and rules -> create metrics for the pi in the solman 7.1 (system monitoring) setup to get these mtes.
2. implement the old ccms infrastructure
Goal: get Alerts in the Solman 7.1 PI MON Alert Inbox if some Messages as they defined in the RWB Alert Rules are not transfered.
Get anyone some know how with this use case?
Thanks and kind regards

Hi Mahr,
Solution Manager 7.1 has a functionality called Technical Monitoring, which keeps a track of all the performance based & availibility metrics of a managed system.
It can also be used to generate email alerts to a group of intended receipients.
I would personally recommend this over CCMS. It uses Diagnostics Agent to pull all these details from the managed system & the configuration is very easy to achieve.
Below is the guide to configure the same -
http://wiki.scn.sap.com/wiki/download/attachments/269157890/Setup+System+Monitoring+and+Alerting.pdf?version=1&modificat…
Best Regards,
Tanmeya

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

Issue while creating Component Based Message Alerting in PI 7.31 Dual Stack

Hi,
We tried to implement Component Based Message Alerting following the steps mentioned in the below blog.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
Ours is PI 7.31 dual stack. However, after setting up the job with my own user id, I am getting the below error inside the log of Jobs tab:
javax.jms.JMSSecurityException: You do not have permissions: action alertingVP.queue and instance:name alertingVP.queue
action consumer
instance jms/queue/xi/monitoring/alert/ALERT-TO-MAIL
Please let us know what permission is required to set up the job.
Thanks,
Rahul

Hi,
Now I am able to receive alert in my mailbox. But it's coming with improper content.
I have set up the job at an interval of every 2 minutes in NWA, and in case if only 1 message fails in IE, in ideal case, I should receive only 1 message details in alert.
However, in every 2 minutes, I am receiving junk data and the number is increasing for the particular scenario for which the alert has been created. Also the Error Category mentioned is showing improper.
But in table SXMSALERTCONTENT I am able to view only the newly added failed entry.
An erroneous alert email content is pasted below:
63 messages failed for "Test_XXX" on "af.s0i.saps0i"
Root cause: -1
To navigate to the failed messages in the local message monitor use this link
The first 1 messages of that data collection:
"AdapterNamespace": "http://sap.com/xi/XI/System",
"AdapterType": "File",
"Channel": "FileSender_XXX",
"ChannelParty": "",
"ChannelService": "XXXXX",
"Component": "af.s0i.saps0i",
"ErrCat": "",
"ErrCode": "",
"ErrLabel": "-1",
"ErrText": "Configured source directory '\\Outbound\\XXX\\CREMAS' does not exist",
"FromParty": "",
"FromService": "XXX",
"Interface": "Z_CREMAS_SUSMM.CREMAS03",
"Namespace": "urn:sap-com:document:sap:idoc:messages",
"RuleId": "3a64dd6e1b1d3e58aff62ea70c97cb80",
"Timestamp": "2013-02-01T09:43:23Z",
"ToParty": "",
"ToService": ""
The failed message however do not relate to the 'source directory does not exist' issue. Please help.
Thanks,
Rahul

I can't find the new text message alerts for every person - help!

Hi.
As I frequently check the Apple website, I visited the iOS 4.2 download site. It said that you get custom text tones and 17 new sounds.
So I updated to get the new things. But then I checked Settings to see the new alerts and what they sounded like. But I only found the same old Tri-tone, glass, horn, etc. There were no new ones.
So I checked Phone, but there was no custom text message alert option.
Am I the only one experiencing this problem? I have an 8 month old iPhone 3GS and it works great.
I am also suspecting that it could be an iPhone 4-only deal.Which would be ridiculous because I would be really upset to see that Apple only cares about the people who cash in their hard-earned bucks on every new Apple gizmo they set eyes on.
Please help! Thanks in advance

I understand that it has been answered and has been said that it is for the iPhone 4 only; however, on their website it does not specify that, this is exactly what it states:
"Messaging with text tones
Know who’s texting without looking at your screen. Choose from 17 new alerts and assign custom tones for people in your contact list.
iPhone only."
If I am not mistaken, "iPhone only" includes every iPhone generation to which 4.2 can be installed in, not just the iPhone 4. If it is in case for the 4 only, then they should have specified and not made a misleading advertisement about it since every iPhone user has been waiting for new tones of any sort since the first iPhone ever came out. Making it available for only iPhone 4 users is a very fowl move from Apple since it's such a basic thing to the phone itself. They should address the issue correctly and make it available for the 3G and 3GS.
Apple just asked for angry customers with this one and they definitely know it's not fair.

How to exclude synchronous interfaces from component based message alerting

Hi Pi experts,
We are configuiring Alerts in PI 7.3 single stack.If we have 'n'number of interfaces, and if we configured general alerts for all.How to exclude synchronous interfaces in that.Alerting is for asynchronous interfaces only.How to do that.
Please advice on this.
Regards
Suneel

Hello,
>>What are your approaches regarding this requirement in the context of java-only?
I would suggest you to schedule jobs like this:
Customize Alerts Using Job in PI 7.31/PO
>> alerts are consumed according to the given interval and not in "real time" when error occurs, today solution using BADI is "real time" - if possible I would prefer "real time" solution
Check this:
Michal's PI tips: How to trigger an alert for Component Based Message Alerts (CBMA) via "API" ?
>>an separate service determine the actual alert count would be helpful to provide the correct value for maxAlerts, this have to be called beforehand
I haven't tried it but i think u can do that, since these consumers are nothing but JMS queues only so i think there will be a method to read number of alert counts.
>>In history I saw emails generated by the standard alert consumer which only contain details for the first alert, in my case I need details especially the message id for all errorneous messages
If ur max alert parameter is greater than 1 then u should see multiple alert text (along with message id and other details) in ur email message.
Thanks
Amit Srivastava

Java-only, Component based message alerting - loopback to sender system

Dear guys,
we are using the alert framework availbale on PI 7.11 to notify the sender system if there is an alert for specific interfaces. In that case a customer function module is called giving the message id of the request message (message is sent via ABAP proxy). As a result the according entry in customer table is updated.
The implemntation is based on the BADI ALERT_MODIFY_TEXT and uses the standard function module ALE_BAPI_GET_UNIQUE_RECEIVER to determine the system /rfc destination to send the alert notification.
This solution works fine so far.
As PI 7.11 dual stack is not the latest release, we are thinking of upgrading to current PI/PO release. In this context also shift to java-only installation is contemplated which will need an alternative solution for the described alert/error notification loopback.
Are there any possibilities analog to BADI to implement such a solution?
What are your approaches regarding this requirement in the context of java-only?
Any help/thoughts appreciated.
Best regards,
Jochen

Hello,
>>What are your approaches regarding this requirement in the context of java-only?
I would suggest you to schedule jobs like this:
Customize Alerts Using Job in PI 7.31/PO
>> alerts are consumed according to the given interval and not in "real time" when error occurs, today solution using BADI is "real time" - if possible I would prefer "real time" solution
Check this:
Michal's PI tips: How to trigger an alert for Component Based Message Alerts (CBMA) via "API" ?
>>an separate service determine the actual alert count would be helpful to provide the correct value for maxAlerts, this have to be called beforehand
I haven't tried it but i think u can do that, since these consumers are nothing but JMS queues only so i think there will be a method to read number of alert counts.
>>In history I saw emails generated by the standard alert consumer which only contain details for the first alert, in my case I need details especially the message id for all errorneous messages
If ur max alert parameter is greater than 1 then u should see multiple alert text (along with message id and other details) in ur email message.
Thanks
Amit Srivastava

Component based message alerting

Hi,
I am working on component bvased message alertig in SAP PI 7.4 (dual stack). As per the Michal's blog i have define everything in PI.-
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
Also i have configured Configuration -> Infrastructure -> JAVA System Properties -> XPI Services: AF Core -> and choose tab Services .
Set the value of the alerting.target service property to 1.
and alerting.isActive (value true).
But still i am not getting mail in mail box.
When i check the log viwer i found two logs saying:
Job AlertConsumerJob (ID: 5fe771e0ec86100082e50000002ab43a, JMS ID: ID:1344010011108-000000008399) started on Thu, 5 Jun 2014 03:52:43:011 EDT by scheduler: c0000173a37f11e2b6ab00237d240438
Job AlertConsumerJob (ID: 5fe771e0ec86100082e50000002ab43a, JMS ID: ID:11344010011108-000000008399) ended on Thu, 5 Jun 2014 03:52:43:044 EDT
Could some body help me in this .
Thanks,
Anurag

Hi Anarug,
I am not sure whether it is solved.
From the log entry from the AlertConsumerJob, it seems that this job is running fine,
but it is not finding any alerts.
That means probably, no alert events are thrown by any rule.
So you should focus on that part first and see if you have any aggregated alerts in a job run.
I had some strange experience with Alert Rules that did not have all Message Statuses checked.
As soon as you uncheck any of the Message Statuses in the rule (for example any unusual adapter technology), the rule will not work.
This is a bug in my 7.31 system and I am just trying to fix it using SAP Note 1968989.
Please check if this Note might fit your situation.
Anyway, try to use a DEFAULT-RULE, which you can create in the ID by checking the box "create default rule" when defining a new alert rule.
Other things to check:
- are you using Integrated Configuration or generate at least errors in the Adapter Engine?
For errors in the (ABAP) Integration Engine, the whole story is similar but completely different.
Cheers, Jochen

Personalized txt message alerts based on who is sending it?

Is there anyway on the Iphone to set different text message alerts based on who is sending the text? I am a sysadmin and currently I have our servers sending txt message alerts to my corp phone. I'd like set it to send to my iphone with the caveat of giving a different alert sound then other text messages sent by other people.
I just got my iphone yesterday, so please forgive me if there is an easy solution.

In short, no. You can change ring tones for various people however; no individual group alerts.

Link button in Messages/Alert Overview

Hi,Experts
I am sending an alert message to Messages/Alert Overview ,in that if i click the link button i have to get the user defind form.Can any one can help me regarding this.
Thanks & Regards.
Rajesh.

Hi Rajesh........
Is that your customised form?
If yes then you have to manage it in your Source code itself.........
Regards,
Rahul

PI 7.4 message alert to ECC backend.

Hello Experts,
I am busy with a project for IDOC2JDBC scenario.
In the best case scenario things are working fine, and i get the recors to the external SQL database.
My question is, if there is an error occured in the sql statement or other JDBC error, the communication channel should send an error message to the IDOC sender of the backend ECC.
I am following this tutorial ( http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting).
How can i specify the backend as the receiver for the alert, or is there another way of doing this task?
Any suggestions would be appreciated.
Regards,
Antony.

Hi antony,
In this case, I think that the better way is to create a technical bpmn to send error back to the sender.
Pls refer to the link below:
Detecting Technical Errors in NetWeaver BPM

Message alert when Invoice date preceds Purchase order date

Hi all,
I want to define message alert, when Invoice date precedes Purchase order date. Is there any standard message type is there, If yes please let me know. Otherwise how can i define this, please.
Thanks
CS..

Hi,
You can take help of your abbaper and enter the validation in the user exit of MIRO thru which Invoices are booked.
Hope this helps, if yes, please assign points.
Regards,
Harish

How To Disable Verify Database Message Alert

How To Disable Verify Database Message Alert?
I have a VB6 open Crystal Reports using Crystal Reports XI R2 (SP5) and almost every time I open a report, I get an alert message about the table has been changed and I have to click "Ok" to make it goes away. Is there a way to disabled this alert or set default to "Ok" so I do not have to click this message every report. Thank you very much.

Hello,
You must verify if the database has changed so you can't disable the message. CR must match what the DB is using or the reports will fail or return wrong data.
It's odd that even after verifying the DB in the designer your app still needs it to be verify the report. You did save the report correct?
Also:
Dim CRApplication As CRAXDDRT.Application
Dim Report As CRAXDDRT.Report
Is the report creation engine and you should be using craxdrt.dll. You need to be licnesed to use craxddrt.dll and this may cause problems for you later when deploying.
Use:
Dim CRApplication As CRAXDRT.Application
Dim Report As CRAXDRT.Report
The mapping is not a switch you can turn on or off but it is Event driven. You need to add code to the viewer section to capture the event if the mapping event fires. Then you can set it to the way you want to use it.
I suggest you purchase a case on line and get to the Report Design team to figure out why when you verify the report your app still thinks it needs to be verified. Something going on in your report that the forum makes it difficult to debug the problem. You can't attach files to forums.
Link to Single Case purchase:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Thank you
Don

No message alert

Similar Messages

Maybe you are looking for