No Order items for Billing for the Data specified

Hi ,
*while generating billing document for the Renewal Subscription order(SUBE) through JF01 getting error message- No Order items for Billing for the Data specified.* For this what we can do?
*Please Help me to to proceed futher.*
*Thanksin advance
Madhusudhan.

Hi,
Do check whether the Subscription monitoring Program has been executed for the Renewal Subscription.
Run JKRM - IS-M/SD Monitoring Program for Renewal Controlled Subscriptions.
After running the same Renewal Subscription Order will be updated with Monitoring Procedure,Level,Step type and Status.
Execute the JKRM and proceed Further.
Regards
Saju.S

Similar Messages

Segregate internal ordered items from purch. order items for the i-pro user

We want to know if there are any Oracle i-Procurement implementations that have segregated the internally ordered items via an Order Management sales order from items ordered on a PO (purchase order). We have considered three possible paths to purse. 1) Table of Contents: this seems to not work because you can only connect a Group at the Category level not item level, 2) Multiple responsibilities one for Inventory and one for drop ship: This is not acceptable to the user. 3) Requisition Template.
We attempted to implement this by creating two i-Pro stores named Main and Inventory Only. Our design defined that these stores be associated with a catalog for each group of item. We interpreted that the "Include items without suppliers in this catalog" flag in the Catalog definition would select those items that are stockable. However, the logic behind this flag does not consider the item attributes/Sourcing Rules set at the ORG level. Our company has two Orgs named INV for inventory and DEV for our service organization. For stockable items the items are coded Inventory Sourced in the DEV item master and the sourcing assigment is linked to a sourcing rule which is internal (that is, get from INV org). The items are coded Supplier Sourced in the INV item master and the sourcing rule is a Blanket. Thus, our inventory items were not included in the the catalog even though they were sourced internally at the DEV org because of the blanket sourcing rule in the INV org.
Thank you, Ned

Meera,
Which version of SBO are you using 2005 or 2007?
I don't think Serial numbers can help in this scenario. There is no hard allocation or blocking possible using Serial numbers.
This is the Work around I am thinking about.
Set the items to be Batch Managed - On Every Transaction
When performing Goods Receipt, enter the Sales Order Number as the Batch Number
When creating the delivery, using SBO_SP_TransactionNotification we can easily check the Batch of the Item being selected and verify it with the BaseRef of Delivery lines to match with Sales Order number.
If the numbers don't match we can warn user with message, "The items batch reserved for Sales Order xyz"
Even if you make a mistake when entering the batch number same as Sales Order number when doing a goods receipt. It can still be traced and blocked during delivery.
Hint: The Batch table records the Goods Receipt transaction along with the BaseDocument number, Base Ref, etc
If you decide to go this route, I could help you further.
Let me know
Suda

Applying order by for the data comming from the formula column

Dear Friends,
I am having a report in which some of the columns in which data is comming from the formula columns,but i need the data in asc order.
How can i do it.
Please advice.

I am having a report in which some of the columns in
which data is coming from the formula columns,but i
need the data in asc order.Lets say you have this query:
select empno, sal, comm from emp
And you have empno, sal, comm and a formula column 'f_percentage' in one group. Add one dummy column in the query, like this:
select 'temp' temp, empno, sal, comm from emp
Move this 'temp' column into the second group (drag and drop outside the first group). You don't have to create repeating frame/or need to show this 'temp' column on the report.
Now if you use break order on formula column, that should work. Make sure you have break order on other columns also. Arrange items (change order) in data model as you needed. Run your report before and after this change and make sure you have same number of rows before and after this change.
(from reports builder's help)
"Break Order has no effect on columns that belong to the lowest group of a particular query. Break Order only affects columns in groups that are above the lowest child group of a query"

Early batch opening for order item is activated in the QM data settings

Hi Team
I am not able to generate inspection lot inspite maintaining 04 inspection type in QM view.
Getting this message - ( Make sure that an inspection type for inspection lot origin (03) or for inspection lot origin 04 with
early batch opening for order item is activated in the QM inspection data. )
Please suggest me required settings.
Thanks

Hi
Go to MM02 select the QM view
Clcik the inspection setup button
Select the inspection type 04 detail icon in right corner.
in that screen Control insLot field select the Y Early lot creation for the order item.
Save
Thanks
S.Murali

Same material can exist on multiple line items for the same order.

Hi
Is there any specific customising setting or web shop setting through which we can restrict user to add same material on multiple line items for the same order ?
Regards

No.
But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
Eawar Ram
http://www.parxlns.com

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

Line items for the PO are not automatically displayed

Hi all,
When attempting to post an invoice against PO, the line items for the PO are not automatically displayed. When we went to the Listing of PO's and brought this up, we noticed under the "invoice"tab that the: Invoice Receipt & GR-BsdIV is checked.
need your help
Thanks
Fayaz

Hi,
Can you check delivery complete indicator in PO. It is in PO item details delivery tab.
In MIRO transaction, select the tab Purchase order/scheduling agreement, enter PO number and press enter.
Right hand side select the layout all information .
Regards,
Chandra

No commit item for the item

hi,
when i am creating purchase order against accoount assingnment group "K".
i am getting an issue that it is saying
"no commit item for the item 10 and the company code 1000'
if i double click it
it is saying that no cash maangement, funds maangement is actived for the g/l account.
thanx in advance
regards,
balajit

no cash maangement, funds maangement is actived
Not sure but make a try as follows:-
A separate number range is required for posting plan line items failing which, you will have this issue.
Do the following:-
1) Go to IMG Financial Supply Chain Management --> Cash and Liquidity Management --> Cash Management --> Structuring --> Manual Planning --> Define Number Ranges
2) On the Cash Management and Forecast Number Ranges screen enter 1000 in the Company Code field.
3) Choose the Change Intervals push button
4) On the "Maintain Number Range Intervals" screen choose the Insert interval button and maintain the number range.
5) Next go to IMG Path Financial Accounting (New) --> Financial Accounting Global Settings (New) --> Global Parameters for Company Code --> Enter Global Parameters
6) On the Change View u201CCompany Code Global Datau201D: Overview screen, select company code 1000 and choose u201CDetailsu201D (F2).
7) On the Change View u201CCompany Code Global Datau201D screen, maintain as follows:-
Field Name:::::::::::::User actions and values
Cash Mgmt activated::::::::::::::X
Now retry the process and update whether the above helps you.
thanks
G. Lakshmipathi

No active purchase order item for shipment cost

Hi,
When I'm entering a shipment cost document for a shipment using Vi01, I'm getting an information like "No active purchase order item for shipment cost", When I check in the service procurement tab there is no purchasing document and entry sheet found.
Please let me know what is causing the problem and what needs to be done to resolve this
Regards,
Ashwin

Hi,
Does your shipment document contains any stage?This problem might be because of this reason.
Regards,
Sumit

There was no way to order AppleCare for the iPhone 5 using the online AppleStore to have it activated automatically. Am I missing something?

There was no way to order AppleCare for the iPhone 5 using the online AppleStore to have it activated automatically. Am I missing something?

I must have missed the option to add AppleCare+ to my iPhone 5 pre-order, too. Fortunately, I was able to obtain confirmation from an Apple representative that AppleCare+ can still be added to a new iPhone 5 within 30 days of the device's ship date.
My iPhone 5 Ordering Situation:
Successfully submitted pre-order at 2:05am CST
Realized I did not add AppleCare+
Tried to add it as a separate product
Unable to add AppleCare+ after submiting pre-order
This Morning:
I just got off the phone with an Apple representative. He assured me that, once my iPhone 5 arrives on September 21, I will be able to: 1) call 1-800-MY-APPLE and have AppleCare+ added to my iPhone 5; 2) go into an Apple Retail Store and have AppleCare+ added to my iPhone 5. He said I would have thirty days from my device's ship date (September 21) to add AppleCare+ to it. He also recommended that, if I wanted to have AppleCare+ added at an Apple Retail Store, I should make an appointment as soon as possible. Because I was still concerned something might go wrong, the Apple representative emailed me a copy of my case number to use as a reference in case I have any issues obtaining AppleCare+ on September 21.
Caveats & More Information:
I ordered through the Apple Store app on my iPhone 4
I live in the United States
My carrier is AT&T
I have a case number and repeated assurances from an Apple representative
While your situation may differ from mine I do hope you're able to add AppleCare+ to your iPhone 5 once it arrives, either by calling 1-800-MY-APPLE or by making an appointment at your nearest Apple Retail Store.
Best Wishes,
Dylan

HT1933 Can you help. I have been playing Modern War for some time, but for the first time i purchased a money item for the game. Unfortunately the item was never received. I have contacted funzio the games creators and they have told me i need to contac

Can you help. I have been playing Modern War for some time, but for the first time i purchased a money item for the game. Unfortunately the item was never received. I have contacted funzio the games creators and they have told me i need to contact Itunes direct. Is that correct

You can contact iTunes support via this page and see if they can help (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

CLOSING STOCK QTY FOR THE DATE

Hi
Can any body tell, In which table i can find the closing stock qty for the particular date and for the particular material without including intransit stock qty.
Regards
Mani.

Dear Santhosh,
Yes, we tried to take the last MBLNR(Value) of the date from MKPF and Try to use the LBKUM Field from MSEG table. But the LBKUM value is with intransit stock.
So , we failed in that logic to bring the warehouse stock for the date.
Any other suggestions pls.
Regards
Mani.

How to implement tooltip for the list items for the particular column in sharepoint 2013

Hi,
I had created a list, How to implement tooltip for the list items for the particular column in SharePoint 2013.
Any help will be appreciated

We can use JavaScript or JQuery to show the tooltips. Refer to the following similar thread.
http://social.technet.microsoft.com/forums/en/sharepointdevelopmentprevious/thread/1dac3ae0-c9ce-419d-b6dd-08dd48284324
http://stackoverflow.com/questions/3366515/small-description-window-on-mouse-hover-on-hyperlink
http://spjsblog.com/2012/02/12/list-view-preview-item-on-hover-sharepoint-2010/

Internal Order Report - For the documnets when the cost ele. was not create

Hi,
We created internal orders for tracking capital expenditure relating to assets. At that time, we were not created asset GL's as cost element. Recently we created asset GL's as cost elements (category 90).
Now we are getting the internal order report after creation of cost element for the transactions done thereafter. We mentioned the internal order number in PO but not in accounting document earlier. Now we are maintaining internal order number in accounting document also.
So when we run OKBA we are getting CO document but, it is not tracking against internal order (since order number was not mentioned earlier). We executed one MM document in which internal order was mentioned through OKBB but there is no change in the internal order report.
Is there any possibility to get the internal order report for the transactions done before creation of cost element.
Please guide me
Best Regards
Madhusekhar Gupta G

Hi,
Thanks for your quick replies.
Can we get the report as follows.
1. Total Po's value for the internal Order (through Table EKKN)                                                      xxx
Less: Value already posted to Internal order after creation of cost elements (S_alr_87013019) xxx
Less: Total Value to be invoiced (Tcode -ME2N)                                                                             xxx
Net amount to be posted to Internal Order manually                                                                        xxx
Is it correct?
Regards
Madhusekhar Gupta G
Edited by: gms gupta on Feb 20, 2012 4:33 PM

"Date picker" in report - - View source shows no label for the date picker

Hi
In one of my reports, I am using multiple types (textarea/text/date picker/select list)
I wanted to use a javascript based on the label, but I do not see "<label>" for Date picker in the view source due to which my Javascript fails.
Snippet of view Source:
<td class="t3data" ><label for="f08_0001" class="hideMe508">CATEGORY</label><textarea name="f08" rows="4" cols="16" wrap="VIRTUAL" id="f08_0001">EMPLOYEE INDUCTION</textarea></td>
<td class="t3data" ><span class="lov"><input type="text" name="f11" size="15" maxlength="2000" value="29-FEB-08" style="padding-right:5px;" id="f11_0001" /><script type="text/javascript">
As you can see above, we have a "label for" for the text area but not for the date picker
Is there a reason for the same?
Thanks
Nitin

Hi,
OK - the headers attribute should also help as these will identify the correct cells. You would need to know the html tags used within each cell for each datatype.
Would using cloneNode help you? It's a method of creating a copy of an entire row in a single instruction
Andy

No Order items for Billing for the Data specified

Similar Messages

Maybe you are looking for