No order was found for delivery 0000014019 /000100

Hi All,
Iamloading the data for my delivery ZODS from 2lis_12_vcitm from PSA , but getting the following error :
No order was found for delivery 0000014019 /000100 .
Can any body help me out.
Regrds..

Technically, only when there is Header data in VBAK the delivery can take place, there should be record in VBAK, someone may have done a hard delete on that record. The question is, I am not sure BW system internally validate if the record has a valid order number or not. As long as the data gets to PSA fine, then that should be loaded to ods without problem. It seems like may be this record has some invalid char... seems like the order and line item attached, but the line item is too long, try to confirm if that is valid record specially the line item.
thanks.
Wond

Similar Messages

Foreign trade- Sales Order was blocked for delivery

Hi,
We maintained legal regulation for a country "X" and those settings working fine for foreign trade.
But when the same material using for different country and plant, the system blocking sales order -
In the export log - error message says no legal regulation action( true -we are not maintained for that country-) and license status-4.( Not OK)
How to correct this
if I maintain exemption certificate in material master it is working- But we have more number of material, it is difficult to maintain.
Is there anything to set plant level or country level
Thanks
Chidambaram

Hi,
Thank you for your suggestions, Those settings are ok,
What i observe is , we are using same sales document type for more than one country which is activated for Legal control. It seems it giving troble- We also using same item cat. for more than one country.
In one country we donot need Legal control to happen- Is there any USER exit, in which i can write a program the legal control data in field " EXCOK" can be bypassed while creating sales order
Thanks and regards
Chidambaram

No purchase order history was found for first purchase order

Hi
We are doing the third party sales in system. User created the sales order and the process for the third party. Then he created the PO and due to some reason user has deleted the 1st PO and then created the PO for same material and sales order. Now user wants to create the billing document for the sales order no but system giving the message that u201CNo purchase order history was found for first purchase orderu201D and Message no. ZSD 006.
Could you please suggest how to solve above issue?
Thank you for your help.
Regards
Kishore Gulhane
09324086205

Hi Ashok
Thank you for your reply ,
But user has delete the first PO not the sales order. he is trying to create the billing document for same sales order no.
Please suggest
Thank you
Kishore Gulhane

Sales order is blocked for Delivery-ZH Cost estimate Req

Hi experts,
When I am saving the sales order I am getting the informative message standard cost estimate for material xxxx is missing. when i am creating delivery with reference to sales order it is not allowing me to do delivery it is showing that Sales order is blocked for Delivery-ZH Cost estimate Req( in a log). Can you pls let me know what configuration I have to check.
Regards,
Sunina Agarwal

hello, friend.
it looks like product costing has been activated in your environment. if such is the case, you would have to coordinate with your FICO consultant, and they have to make the necessary standard cost estimates.
please also check if the cost estimates are part of the incompletion procedures. if it is, you would not be able to bill the transaction even if this is taken out of the incompleteness procedure.
regards.

Not able to send Email in SOA Suite 12c,getting No matching driver found for delivery type = EMAIL

Hi All,
I am getting following Errror whlie Sending Testing Mail from Human Workflow .
No matching driver found for delivery type = EMAIL
I followed all the steps mentioned in blogs.
Steps that I followed--
1,Downloaded Gmail and Imap Certificate.
2.Imported in Keystore
3.Create a Email driver properties.
Than

Did you resolve this? I am running into the same problem. Not sure if it a configuration issue or an issue with 12c (go figure). I have tried both a blank sender address list and explicitly putting the target address in. Notification mode is set to email. I am using the Notification Test under Human Workflow/Notification Managent. Where else could it be trying to match the driver to EMAIL?
exception.type: ERROR
exception.severity: 2
exception.name: Error status received from UMS.
exception.description: Status detail :
Status type : DELIVERY_TO_DRIVER:FAILURE,
Status Content : No matching driver found for delivery type = EMAIL,
Addressed to : EMAIL:[email protected],
UMS Driver : null,
UMS Message Id : dcb01e3ec0a8456856fe8a439e6ecf3f,
Gateway message Id : null,
Status Received at : Mon Jan 12 00:49:27 EST 2015.
exception.fix: Check status details and fix the underlying reason, which caused error.
>

Invoice reduction: no message was found for partner

Hi
As soon as I post invoice reduction, I am getting error msg - invoice reduction: no message was found for partner
Pls guide me
Thanks
Karthikeyan

Dear,
Please follow the below configuration, I guess in some point you missed the configuration, so please check your configuration.
1) Tax Treatment in Invoice Reduction
2) Maintain reasons for Invoice Reduction
3) IN OBYC - Transaction Type - RKA - Assign the debit & credit gl accounts
4) Go to OMWA - Double Click on Document Type - Double Click on Document type MIRO - Assign KG document type against -
document type invoice reduction
5) Assign No. Ranges to document type - KG
6) Orocess MIRO document with Invoice Reduction.
Thanks & Regards,
Siva Reddy.S

Error : No framework program was found for include

Hi All,
A web UI enhancement worked perfectly fine in a development system. However, after transporting it to a quality system, it did not work as expected. All transports were error free and all the developed items could be seen in the quality system.
When trying to keep a breakpoint in the redefined method of a controller class, I get the error "No framework program was found for include <> "; where <> is the z implementation class that was created.
Any suggestions/ideas on how to resolve this error?

Hi,
Check the entries in sm30 bspwdv_ehset_asg if the enhacement is assigned to client in Q system..
Hope this helps..
Cheers,
Sumit Mittal

Planning DB Deploy aborts since "No baseline was found for transaction ID 8

Not sure if this is a bug or something we caused on our end but we cannot deploy a planning database anymore. We get the message: Deploy aborted since "No baseline was found for transaction ID 85905". This happens during the export phase. We are using EPM Architect with Planning 11.1.1.10.
Curious if anyone else has ever run into this error.
Thanks,
Jeff Brown

We ran into a similar issue yesterday, except the transaction ID in the ds_baseline_library was greater than any transaction ID's in the or_object table.
Here's what Oracle thinks happened:
Baseline records were likely to be deleted by a baseline cleanup kicking in during application deployment. Normally, the cleanup only deletes older baselines but causes problems if run while an application is deployed.
We don't believe this is what happened as the cleanup was scheduled to run at 3:00am, so who knows what really happened. Here is the guidance we received in terms of resolving the issue (we didn't follow this, but I suspect it would work):
From your update it is clear that EPMA still looks for the same baseline records which apparently do not exist anymore.
The steps below should bring this to work.
1. Create backup of the Planning application database.
2. Create backup of the Essbase data, Calculation scripts, rule files, substitution variables.
3. Delete the affected Planning application in EPMA (this should delete it in Planning and Essbase as well).
4. Create a classic Planning application with same name as the deleted application.
5. Override the classic Planning application database (step 4) by using the Planning application database backup (step 1).
6. Using an administrator user, log into the Planning application and navigate to Administration > Manage Properties.
7. On the “Application Properties” tab, click “Add” and enter a new property “EDIT_DIM_ENABLED” with a value of “true”. Click “Save” at the bottom of the page.
8. Once you have completed steps 6 and 7, restart the Planning service.
9. Log into the Workspace and Navigate > Administer > Application Upgrade. This upgrade wizard should list the newly created classic Planning application as “Upgradeable”. Select the application and upgrade it as local dimensions.
10. The application should now be visible in the EPMA application library and its dimensions loaded as local dimensions.
11. Use EPMA to deploy the newly created Planning application.
12. Restore the Essbase data, Calculation scripts, rule files, substitution variables.
Here's what we did:
1) Export our forms.
2) Copy the app in EPMA.
3) Deploy the new app just to make sure it works.
4) Delete the old app in EPMA.
5) Copy our "copy" to the original app and re-deploy.
6) Import our forms.
We lost a few items with this approach (business rules and variables), but we hadn't developed much yet. We felt this was cleaner than copying a repository into a Classic app and then upgrading that app to EPMA. Either way, we're back iin business. FYI - it looks as though this issue may be fixed in 11.1.1.2. In the release notes, under fixed defects, check out defect # 7573567. Sounds like this is the same problem.

No login command was found for 'WebLogic Server 10.3.5.0 - in managed serve

i am getting following warning when i run my web logic managed server
No login command was found for 'WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Oracle WebLogic Server Module Dependencies 10.3 Thu Mar 3 14:37:52 PST 2011 Oracle WebLogic Server on JRockit Virtual Edition Module Dependencies 10.3 Thu Feb 3 1.
Would appreciate suggestions to resolve.
Thanks.

Hi,
Add -Dweblogic.StdoutDebugEnabled flag while starting the managed server and then post the verbose error message in your next post
For setting the flag follow the below steps
If your using Linux box and not using node manager to start the managed server,add the below line startManagedWebLogic.sh file
JAVA_OPTIONS="-Dweblogic.StdoutDebugEnabled=true ${JAVA_OPTIONS}"
echo "JAVA_OPTIONS=${JAVA_OPTIONS}"
If your using Windows box and not using node manager to start the managed server,add the below line startManagedWebLogic.cmd file
set JAVA_OPTIONS=-Dweblogic.StdoutDebugEnabled=true %JAVA_OPTIONS%
echo JAVA_OPTIONS=%JAVA_OPTIONS%
If you are starting the Managed server through the node manager then use these flags From Admin console : servers >>>. MS1 >>>> server start >>>> Arguments :-Dweblogic.StdoutDebugEnabled=true
Regards,
Fabian

I get error "no content was found for the specified identifier of 10006715353

I am publishing book to iBooks Author and keep getting "No content was found for the specified identified 100006715353

When you export your completed book , you wil see the saved file as .... xxxxxxxx.ibooks
A Preview is a sample of your book to allow potential buyer to check the content.
You can either duplicate your book, add PREVIEW to the file name ie PREVIEWmybook.iba.
This must have at least 15 pages. OR when you upload your book, you have an option to allow iTunesProducer to take a chapter as a preview and you can also select which chapter you want as a sample.
Tiffs are not suitable jpgs are.
Your original post says....I am publishing book to iBooks Author and keep getting "No content was found for the specified identified 100006715353
If you do not know what an ibooks file or preview is... what were you trying to upload?
"Publishing to iBooks Author" You create books in iBA to "publish" to the iBook store via iTunesProducer.
Use this link for more information: http://support.apple.com/kb/PH12101 or this is the full list for you to study: http://www.apple.com/support/mac-apps/ibooksauthor/

Error in APO Resources"'No unit of meausre was found for selected resource"

Hello APO Expetr forum,
IN APO resource i am not able to see any Bucket capacity in SNP Bucket capacity tab. its grayed out and blank. when open the resource with you version then i can able to see Bucket capacity.
So her how can i update the SNP Bucket capcity for the resource. Because of this issue i am not able to load resource in SNP Planning Book under capacity view. Getting error message as 'No unit of meausre was found for selected resource'.
Pleae suugest what could be the reason. i suspect only because of Bucket capacity problem.
Thanks & Regards,
Deviprasad

Hello DeviPrasad,
Please check the type of the resource. This should be a single Mixed or Multi Mixed resource to maintain the SNP capacity.
Thanks,
Mahesh

BAPI_SALESORDER_SIMULATE -"No condition record was found for condition"

Hi Guys
I am using Function Module BAPI_SALESORDER_SIMULATE to get the prices. I also want to enter a particular condition type for which i need price simulation. In course of doing so I get an error message No condition record was found for condition JECS. Kindly let me how to resolve this.
Regds
Karthick

Hi,
If "JECS" is a condition for which you are doing simulation then you have to maintain this condition type in "V/06".
This is related to Pricing configuration in SD.
Reward points if this helps.
Regards
Karan

T Code for doing mass output for Sales order like VL71 for Delivery

Hi
Can anyone let me know what is the t code for the sales orders for which despatch time was set as "3- using own transaction"
Muthu

Hi,
Though there is a program, there is no output for sales order similar to VL71 for delivery. Sales order is the only transaction for which there is no tcode for this purpose.
You can do the following.
Go to SE38 give program name SD70AV1A and execute
Now give ur selection criteria and save this as a variant.
Now you can schedule a job at regular intervals using this variant.
This will enable that if you maintain the output record as 3(using own transaction), the output will be created in mass for multiple sales orders.

No approver was found for Standard Purchase Order #

I created an Employee for that employee i assigned a Buyer
and Document type i gave a Direct approver ,But it is still showing No approver for this PO.
could some one please give me the details how to approve a purchase order using Direct Method.
And also please tell how to define approval hierarchy for PO approval and how to assign that hierarchy to Buyer.
Regards
Narasaiah
Message was edited by: Narasaiah
user554411

hello,
I found the documents still at the buyer's.it has to do with the revision number; it was not sent correctly. the buyer reopened the documents and resent them.
Now the problem is solved...

Post Goods Receipt in EWM : No items found for delivery

Hi All,
I am sending across am Inbound Delivery from ERP to the EWM System.
The sequence of actions are as follows :
1. In bound delivery being sent from ERP to EWM.
2. Warehouse task being created in EWM.
3. Warehouse order being created in EWM.
4. Warehouse task confirmed and saved in EWM.
When I go and try to do a PGR for the delivery in EWM, then it complains about no items being found in the delivery for Goods Movement. Could someone please let me know if I am missing any steps for the PGR. Are there any specific configurations that need to be done for the PPF?
Thanks,
Arup

Hi Thiru,
A somewhat late aswer, but it might be helpfull for other users with the same problem. You can solve this problem by assigning the division/valuation area to the business area. Follow the path below to execute this:
SPRO - enterprise controlling - Consolidation - Integration: preparation for consolidation - Preparation in the sender system - Further settings for Business Area Consolidation - Materials Management - Assign Division/Valuation Area to Business area.
Under Enterprise structure - Assignment - Logistics General, you will find a similar function. First execute option 1 or 2 here and then execute option 3. This makes it work as well, exept that it will not be recorded in a proper transport. The first option I gave for assigning is properly transportable.
Greetings,
Sjaak van den Berg
Magnus Technology Consultants
Edited by: S. van den Berg on Aug 14, 2009 1:09 PM
Edited by: S. van den Berg on Aug 14, 2009 1:10 PM

No order was found for delivery 0000014019 /000100

Similar Messages

Maybe you are looking for