"No partition table found" Can't access to my DATA partition

Hello friends! It's happened a catastrophe! Yesterday I was resizing partitions on my hard drive, divided in this way:
1: ext4 containing CHAKRA
2: swap
3: extended
3rd: DATA
And here there were all the other partiotions containing ARCH (/ / var / home)
I decided to delete all partitions of Arch, and to extend the DATA partition with the space available obtained by the elimination of arch ... I have done these steps on chakra, the extended partition was unmounted and free to work, I left my computer on all night without even using it so as not to interfere, but 10 minutes ago I go to check and I discover that my computer is off (do not know why because the battery was attached, maybe electricity went down for a considerable period of time and in any case my battery lasts a very little so it has not resisted until the return of electricity).
I turn my computer on, I sign in it with Chakra and I find out that the extended partition is gone! Partitionmanager tells me "No partition table found" and all my data are disappeared!
Is there a way to remedy this apocalypse? I truly don't know what to do, apart committing suicide!
Last edited by TheImmortalPhoenix (2012-01-18 05:30:20)

There is no drive! There is only free space, and all i can do is to create a new partition...
This is the output of fdisk -l
> sudo fdisk -l
Warning: ignoring extra data in partition table 5
Warning: ignoring extra data in partition table 5
Warning: ignoring extra data in partition table 5
Warning: invalid flag 0x131b of partition table 5 will be corrected by w(rite)
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0006fdf9
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 31459327 15728640 83 Linux
/dev/sda2 35653632 976766975 470556672 f W95 Ext'd (LBA)
/dev/sda3 31459328 35653631 2097152 82 Linux swap / Solaris
/dev/sda5 ? 3648605328 6213431608 1282413140+ fb VMware VMFS
Partition table entries are not in disk order

Similar Messages

Can not access the Instance Data of a Singleton class from MBean

I am working against the deadline and i am sweating now. From past few days i have been working on a problem and now its the time to shout out.
I have an application (let's call it "APP") and i have a "PerformanceStatistics" MBean written for APP. I also have a Singleton Data class (let's call it "SDATA") which provides some data for the MBean to access and calculate some application runtime stuff. Thus during the application startup and then in the application lifecysle, i will be adding data to the SDATA instance.So, this SDATA instance always has the data.
Now, the problem is that i am not able to access any of the data or data structures from the PerformanceStatistics MBean. if i check the data structures when i am adding the data, all the structures contains data. But when i call this singleton instance from the MBean, am kind of having the empty data.
Can anyone explain or have hints on what's happening ? Any help will be appreciated.
I tried all sorts of DATA class being final and all methods being synchronized, static, ect.,, just to make sure. But no luck till now.
Another unfortunate thing is that, i some times get different "ServicePerformanceData " instances (i.e. when i print the ServicePerformanceData.getInstance() they are different at different times). Not sure whats happening. I am running this application in WebLogic server and using the JConsole.
Please see the detailed problem at @ http://stackoverflow.com/questions/1151117/can-not-access-the-instance-data-of-a-singleton-class-from-mbean
I see related problems but no real solutions. Appreciate if anyone can throw in ideas.
http://www.velocityreviews.com/forums/t135852-rmi-singletons-and-multiple-classloaders-in-weblogic.html
http://www.theserverside.com/discussions/thread.tss?thread_id=12194
http://www.jguru.com/faq/view.jsp?EID=1051835
Thanks,
Krishna

I am working against the deadline and i am sweating now. From past few days i have been working on a problem and now its the time to shout out.
I have an application (let's call it "APP") and i have a "PerformanceStatistics" MBean written for APP. I also have a Singleton Data class (let's call it "SDATA") which provides some data for the MBean to access and calculate some application runtime stuff. Thus during the application startup and then in the application lifecysle, i will be adding data to the SDATA instance.So, this SDATA instance always has the data.
Now, the problem is that i am not able to access any of the data or data structures from the PerformanceStatistics MBean. if i check the data structures when i am adding the data, all the structures contains data. But when i call this singleton instance from the MBean, am kind of having the empty data.
Can anyone explain or have hints on what's happening ? Any help will be appreciated.
I tried all sorts of DATA class being final and all methods being synchronized, static, ect.,, just to make sure. But no luck till now.
Another unfortunate thing is that, i some times get different "ServicePerformanceData " instances (i.e. when i print the ServicePerformanceData.getInstance() they are different at different times). Not sure whats happening. I am running this application in WebLogic server and using the JConsole.
Please see the detailed problem at @ http://stackoverflow.com/questions/1151117/can-not-access-the-instance-data-of-a-singleton-class-from-mbean
I see related problems but no real solutions. Appreciate if anyone can throw in ideas.
http://www.velocityreviews.com/forums/t135852-rmi-singletons-and-multiple-classloaders-in-weblogic.html
http://www.theserverside.com/discussions/thread.tss?thread_id=12194
http://www.jguru.com/faq/view.jsp?EID=1051835
Thanks,
Krishna

Multiple Users Can't Access Time Capsule Data

My wife and I have two separate Apple MacBooks that share a Time Capsule. We have different account names on these respective computers. I initially set up my Time Capsule and created folders that I can access from Finder.app when I connect over our wireless network. In Airport Utility.app, under the "Disks" tab, I set up the shared disks "with device password", so that she and I can mutually access all the data on the Time Capsule. However, when I try to access it from her computer, I click on the Time Capsule in Finder.app and get this dumb Sharepoint icon--a total dead end. I created another account on her computer with the same name as the account on my own computer, and from that account, I'm able to access all of the data on the Time Capsule. This therefore seems to be a permissions issue, but I've checked all of the files and folders on the Time Capsule and ensured that they all have "everyone read & write" access, so there should be no restrictions on access to this data.
Why are the volumes on my Time Capsule sensitive to the user accessing them? How do I set up data repositories on the Time Capsule that can be accessible to all users on my network? I'm out of ideas.

Are both computers actually running Mavericks??
This is very typical Yosemite problem.
For some reason which I don't yet understand Yosemite is horrible at handling network drives.
dumb Sharepoint icon
Sharepoint is a dlink app?? If you have ever had some app loaded that uses a different product to apple then it can mess your access.
WD share stuff seems to be the worst and causes no end of problems.
What you are seeing btw is the TC is not a NAS.. you are trying to use it as one.. but it isn't.

ICloud storage space used up by old data from 1st gen iPad I traded in nearly 2 yrs ago for an iPad Mini. Can't backup any info for mini or new 6 plus. How can I access this old data to clear it out?

My iCoud storage space is being used up by old data from a 1st generation iPad I traded in nearly 2 yrs ago for an iPad Mini. The people at the sprint store where I made my trade were supposed to transfer everything over from my old iPad to the new Mini once they backed up the old device to iCloud. Well, long story short, none of the data ever got transferred to the new iPad, but it all got backed to iCloud, eating up all my storage space. Here I am almost 2 years later, and I've never been able to back-up my iPad mini. What's worse, My iPhone 4 wasn't backed up that whole time, and now I can't back-up my data from my new iPhone 6 Plus to iCloud either. Trying to find creative ways to store and save my information and data between all my devices is getting to be ridiculous. I don't want to upgrade my storage space though...just want to clear out a great deal of what is already being stored. How can I access this old data to clear it out?

The only way to access data from an iCloud backup is to restore it to your device. You could, for example, back up your iPad mini to your computer using iTunes (by connecting it, opening iTunes, then going to File>Devices>Back Up and choosing to back up apps and transfer purchases when prompted), then erase it and restore the old iPad backup (as explained here: iCloud: Restore or set up your iOS device from iCloud), save any recovered data you want to keep, then restore your iTunes backup back to your iPad mini (by connecting it to your computer, opening iTunes, then going to File>Devices>Restore from Backup).
Once you're done with the old backup, delete it from your account to free up the space.

TS1538 I have just purchased an iPhone5 and created a new user instead of using my previous ID. How can I access my previous data?

I have just purchased an iPhone5 and created a new user instead of using my iPhone3 ID. How can I access my previous data?

don't just sign out!
if you simply sign out, the stuff you recently purchased will be an issue in the future when an update comes out for apps or anything else. restore the device as new from itunes then restore from a back if you have one as stated above...or set up as new and use correct apple id. this will ensure you will be using the apple id that you used originally without issues from the new one.

"GUID partition table scheme" Can't install snow leopard on my mbp.

I have a mbp that is partitioned as half mac, half XP. I put in the snow leopard CD and came up with an error that said I could not istall snow leopard because my partition did not fit the "GUID partition table scheme". I followed the menues to the partition section of the disk utility. From there, I don't know what to do. I can't click on the "options" button to change to the GUILD thing. Do I need to repartition my entire mbp? Will this erase my other partition? And will it delete all my data? Any suggestions on what to do???

GUID partition table (GPT) or map is a set of instructions at the very begining of a storage drive to tell the hardware what partitions and formats are where on the drive.
A Intel Mac now requires a GPT to boot OS X as it uses EFI (Extensible Firmware Interface) which is a software firmware in a hidden EFI partition on the boot drive designed originally for copy protection by Intel. EFI loads into memory before OS X does, which can be seen if you have verbose mode activated upon boot time.
Setting up the boot drive with a GUID Partiton table WILL require backing up of all data off the machine and a complete erasure of ALL partitions on the drive, which includes ALL data, programs, operating systems and files not backed up off the machine previously.
Since a partition map is basically road directions, when it's destroyed so does go the partitions.
Also since you will be fresh installing 10.6, your free iLife won't tag along,, however you can erase/install 10.5 first then upgrade to 10.6 (no BootCamp) and that shoudl work.
Unfortunatly Mac's only now support Windows 7 in Bootcamp, however Windows 7 Pro (and above) will run XP programs natively or via free virtual machine XP downloaded from Microsoft, however since it's really not native, 3D games etc likely won't run very well.
If your not familiar or willing to take a chance, then I suggest you have someone else upgrade that machine.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Acrobat can't access shared review data on WebDAV

Now I'm trying to setup shared review environment using WebDAV.
but, only when i use acrobat on MacOSX, can't access review data.
when i use windows this problem doesn't happen.
Does anyone know the any of reasons, workarounds?
* Environment
DAV Server : Apache 2.2.3 (mod_dav, mod_dav_fs) on CentOS 5.6
Client : Mac OSX 10.6.8
Acrobat : Acrobat Pro 10.0.0
* Repro Steps
1. Open Safari
2. Access to WebDAV Url
3. Acrobat (plugin) on Safari seems to open pdf file correctly, but error dialog is appeared.
    dialog says "can't connect to ... (in Japanese)"
* Additional Info
I can uploaded pdf file to WebDAV folder with this(MacOSX) client. (use Shared review wizard of Acrobat)
I can access review data when I use Windows(XP Pro, Acrobat X Pro and Acrobat Reader X 10.1.0)
WebDAV server 100% passed litmus(server protocol compliance test suite)
   litmus : http://www.webdav.org/neon/litmus/
This problem occured both of via http and via https.

AmbooS wrote:
A similar issue was fixed in Acrobat 10.1 patch. Download and install the patch from Adobe website and see if your issue is resolved.
I installed Acrobat Reader 10.1.0 on the above Mac (I didn't apply the patch). but the same problem reproduced with this Acrobat Reader.
( get the Dialog box which says "Acrobat cannot connect to the Review Server ..." )
Then I changed the following preferences, This problem has not been solved yet.
1. Security(Enhanced)
    Add webdav host to Privileged Locations.
2. Trust Manager -> Internet Access ...
   Click 'Change Settings...', then Allow webdav site address.
I verified the followings.
1. MacOSX Safari can't access to PDF(Shared Review) properly.
After the installing Adobe Reader 10.1.0, while loading pdf, progress bar of Acrobat Reader Plugin began to not progress (not finished to open).
When I open the PDF(not for Shared Review), Reader Plugin can open it correctly.
(I verified Safari's installed plugin setting for pdf is "Adobe Acrobat Plug-in, Version 10.1.0")
*I verified the following 2-4 with Firefox on MacOSX.
2. I checked http access log (of webdav server), but there are no access logs from (MacOSX's) Adobe Synchronizer.(I verified this when the firewall of MacOSX was disabled)
3. Access to PDF file is working properly (Acorobat Reader on MacOSX can display PDF (but shared review data are not)).
4. When I accessed from Windows XP(Acrobat Reader), like the following http access log has been recorded.
xxx.xxx.xxx.xxx - suda [22/Sep/2011:15:41:55 +0900] "GET /webdavtest/2/413/1/NEW_0003_review.pdf__735c6012134e4f9f9fbdebb4b9029b39/masao.suda.at.i nteraction-i.co.jp.xml HTTP/1.1" 304 - "-" "Mozilla/3.0 (compatible; Adobe Synchronizer 10.1.1)"
It seems that Adobe Synchronizer on MacOSX (Adobe Resource Synchronizer) doesn't work properly.
In the previous post. Once I (and my co-worker) verified this was solved certainly.
I found similar issue ( http://forums.adobe.com/thread/850377 ). was this problem solved?

How can I access Address Book data from an older version of the application to transfer it to a newer version of Mac OS running on a second hard drive on the same MDD G4?

I installed a hard drive from one PowerPC Dual 1.25 GHz MDD into another one with an older version of the OS X. all my Address Book data are on the older hard drive, from which I now boot the computer. When I launch Address Book as an app on the hard drive with the newer version of the OS, I get an error message that says I cannot run the version of Address Book from the older hard drive on the newer OS. How can I access the data on the older hard drive version of the Address Book app so that I can transfer it to the newer version of the app on the boot drive? The "Import" functionality will not work. I will be grateful for any help I can get. I would also like to uninstall the older version of OS X from the older hard drive.

Boot from the older version of OSX, then in AB use the File>Export>Export vCard after selecting all in AB.
Then boot from the new OSx & use the new AB to import that VCF file.

How can we access R/3 data remotely from SAP APO system?

Hi Experts...!
I want to access R/3 data (i.e, some ZTABLE data) remotely from SAP APO system. Can any one give some solution regarding this ?
Regards
Rayudu

Hi,
Please try this FM RFC_READ_TABLE.
Regards,
Ferry Lianto

How can I access my backup Data on my Time Capsule HD?!

I have 1.77 TB of Data but cannot access!?
After having problems with several programs crashing, I had do do a complete reset, on my macbookpro.
I erased everything on my macbookpro's HD and did a complete reset begininng with reloading OSX-Maverick.
I have also manually reinstalled all my apps, hoping to avoid reinstalling to problems causing the crashes.
Everything seems to be working fine now... with the exception that I can't seem to access the backup data on my Time Machine.
I have tried using the disk utility also, but after a 1 min of trying to access the disk, it stops reponding and I have to force quite Disk Utility.
I need help! The back up data is my life!;-0

Did you use TM since you upgraded to Mavericks??
That could cause damage to the TM backups.
I am really unsure how to advise you on this one.. but if you need the backups you have to take heroic measures..
I would not use Mavericks.. if the backups were done under Mountain Lion.. get an external drive for the computer and load ML on it.. then get another disk and do a full restore of the backups to a different location.
See the restore info in Pondini for help.
Q14-17 here.
Or boot with the original DVD and use TM to restore .. as per instructions here.
http://pondini.org/TM/Home.html
Use Setup Assistant .. or if all else fails use migration assistant.
It may even be worth archiving the TC before you begin so you know all the data is preserved and Mavericks is not just going to wipe it out as soon as TM starts.

I can't access my cellular data account on my iPad

Having trouble accessing my cellular data account on iPad , it refuses to accept password, won't send email with forgot password info.

I had this problem and tried every which way to fix it. Then I realized perhaps the email was missing a letter as it was simular to my son's...when i tried his I could access and change the information. (I now 'snap' pictures of each step I do to keep in a safe place, so I can see exactly what info I put in.) No wonder I never recieved the email confirmation...duh, that should have given me the clue!!

Can't access Palm User Data with Mountain Lion

Hi
I am now using Mountain Lion (10.8.6) and can not acces Palm User Data which has all my contacts. I'm not very computer savvy and am not even sure what my old computer was running that allowed me to open my Palm Desktop software so I'm not very comfortable trying to install another OS just for this application. Is there another way to open the Palm User Data with another application? I tried Text Edit and the data is corrupt. Or is there any 3rd party software that could help?
thank you.
Madeline

Hey guys I've found the solution for this problem!!! You will can continue using the wifi conection! My Mountain Lion language is portuguese so i will translate how i think it is in english... go to sys preferences, click on network, than select wifi and click on advanced button, select the hardware tab, on set check it as manual, and then check MTU mode as personilized. It will show a number (problaby 1500) set it as 1400 or lower and click on ok! After that, everything will work again! I hope that helped you all! Thanks.

Can't access nor see Macintosh partition and files in Windows

Hello,
Basically I just rebooted the whole laptop and installed OS X and windows 7 (using Boot Camp Assistant).
I don't know why, I can't see the Macintosh partition when I open My Computer. It's like it doesn't even exist! I've been searching a solution for this for hours and they're all recommending installing software like Macdrive (which I tried and is asking me to FORMAT my mac partition, calling it Disk E).
Last time I had installed windows I didn't use ANY software whatsoever, I could simply go to my computer, select Macintosh HD, and see/copy my files (read only) with no problem!
I even went into System Preferences and clicked the box of sharing files with Windows...
Help please!
Thank you!

Thanks
Here you go:
sebouhs-MacBook-Pro:~ Sebouh$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group D8176A07-2181-4546-8EA0-056F5B8E058A
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         250248101888 B (250.2 GB)
    Free Space:   18972672 B (19.0 MB)
    |
    +-< Physical Volume 5BE26DA2-ADAF-43F9-9099-E31D3A37A0A6
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     250248101888 B (250.2 GB)
    |
    +-> Logical Volume Family 99A122C4-DBD7-463E-B54C-713679120DE4
        Encryption Status:       Unlocked
        Encryption Type:         AES-XTS
        Conversion Status:       Complete
        Conversion Direction:    -none-
        Has Encrypted Extents:   Yes
        Fully Secure:            Yes
        Passphrase Required:     Yes
        |
        +-> Logical Volume 97B297B8-CF57-469B-B19F-700E4EDDB074
            Disk:                  disk1
            Status:                Online
            Size (Total):          249876807680 B (249.9 GB)
            Conversion Progress:   -none-
            Revertible:            Yes (unlock and decryption required)
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS

My Time Capsule has a hidden partition and I can't access it!

I had a late 2010 MacBook Pro using Time Capsule as backup method. Recently, I sold this computer and bought a brand new MacBook Air 13 inches, which I started using in lots of different Wi-fi networks without doing an assisted migration. After one week I came back home and tried to migrate from my Time Capsule, but this computer doesn't seem to find the backup files. When I looked at the Time Capsule's disk, it has 242Gb used, meaning the old files still there.
The Time Capsule is assigned to the same Wi-fi network as the MBA and I have already tried to use Disk Utility to verify and repair the unit, without any useful results.
Has anyone experienced the same problem and found a solution?

Wireless has been more than problematic of late.
I recommend you go and buy the USB to Ethernet adapter Apple sell for the Air.. it is not expensive.
IMHO you cannot fix anything on the TC via wireless..
Once you have ethernet, try one of the manual restore methods pondini recommends if the migration still fails.
Check out Q14-18 here.
http://pondini.org/TM/FAQ.html

Error: Bundle not found, can't access messages

We're on the road in London, once our account opens and the preview of e-mails is displayed , we click on" read all messages" the only thing that happens is a screen that says....LOADING and this has gone on for over 1 hour.
Any ideas?

Have you tried going directly to the Verizon webmail interface and bypassing all of that front-end stuff?
http://webmail.verizon.com/
If you haven't I suggest you do so, it might get you past the issue.
Justin
Verizon FiOS TV, Internet, and phone
QIP7232, IMG 1.8, Build 02.54
Keller, TX 76248

"No partition table found" Can't access to my DATA partition

Similar Messages

Maybe you are looking for