No portal, only EBPuFF06SUS, vendor how to reply the bid and auction?

According to standard functions, vendor use portal to response bid invitation and auction, am I right?
Our customer have no portal, only EBP＆SUS, if want to use sourcing functionality, vendor how to reply the bid and auction? any solution on this case?

Hi,
Bidder logon to SUS. SUS has manu link for Bid Invitation. When bidder selects Bid Invitation link in SUS, application brings up the EBP ITS screen.
+ You have to set up bidder replication from SUS to EBP
+ Single Sign On should be setup from SUS to EBP
+ SUS bidder should have SAP_EC_SUS_BIDDER role
Please check SUS customizing.
SUS -> Master data -> Maintain Systems for Synchronization of User Data
Regards,
Masa

Similar Messages

How to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3

Dear All,
Please let me know the process how to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Currently I am getting Only 4 columns and 10 rows in One Page .And I am getting 1,2 etc tabs for both row and column. So i want to increase the column length more than 100 and row length more than 10000.
Please suggest me a suitable solution to over come this issue.
Please find the Below screen shot.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

TS1424 i ordered a album i didnt want and to top it off the sangs are only half there how do i delete purchase and refund my money so i can get the right album?

i ordered a album i didnt want and to top it off the sangs are only half there how do i delete purchase and refund my money so i can get the right album?

There are no refunds.
If the songs are incomplete then delete and redownload:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to float a landing page to capture email address, only shown once per visitor to the site, and not on return visits?

I would like to float a landing page to capture email addresses, that is only shown once per visitor to the site, and not on return visits OR after they submit their email not to be asked again.
thanks guys!

Hi Scott,
Thanks a lot for the advice.
Actually I added user names to the apex_access_control table and assigned each user the desired privilege but did not notice that I should do the following setting.
*Access Control Administration > [RUN] > Set Application Mode: Restricted access.*
Thanks,
Guy

How come the latest version of firefox (4.0) lost the feature of saving the bookmarks whenever I exit the browser? Now the only option is actually closing all the bookmarks and manually opening them again.

With previous versions of Firefox, I was always asked this question whenever I exit the web browser and turning my laptop off: Do you want to save your bookmarks?... At least that was the message of the question. Right now, my only option is actually closing all the bookmarks and manually opening each one of them or starting from a saved bookmark list.
Thanks!

One change in Firefox 4 is to by default stop Firefox displaying the warning message, but it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''

How to change the day and time seen on the calendar

Hi.
I am a bit confused as to how to restrict the day and time shown on a calendar.
The ical help says this:
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
However, in my preferences pane, i don't have a either a week or day pop up menu that i can see, so i can't seem to restrict these fields. It's really frustrating as calendars are beginning at 1am!!!!
Anybody got any ideas?
Thanks
David Tobin

OK, but what did the help menu mean when it said..
To view the day's, week's, or month's events, click the Day, Week, or Month button at the bottom of the iCal window.
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
To change which months are shown in the mini-month calendar (in the lower-left corner of the iCal window), click the arrows above the mini-month calendar. To see more than one month, drag the mini-month divider (the horizontal gray bar above the diamond) upward.
To see events that are earlier or later in the day, use the scroll bar on the right side of the main calendar view.
To change the range of time in the main calendar view that is not shaded (representing your "normal" day), choose iCal > Preferences. In the General pane, choose the times you want to appear in white (not shaded) from the "Day starts at" and "Day ends at" pop-up menus. All times outside that range are shaded.
This suggests that you should be able to limit the hours actually shown on the calendar to a set range as opposed to just changing the shaded area.
Have you any idea how to achieve this, as i don't see the popup menu suggested with...
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
I am confused!!
Any other ideas?
David Tobin

How to change the font and colour of the PL/SQL Editor in forms

Hi All,
I am fed of viewing the small fonts in the PL/SQL Editor. I am feeling stress
in my eyes daily...Please any body help me how to change the color and font
of the PL./SQL editor in oracle forms 6i..Thanks in Advance...

Hi
Thanks for the reply..
But I personally feel that Oracle people should have done this since
any editor should allow us to change the font and colour...any way lets
hope that in the future releases that may happen...
Raghu

How to use the eventing and databag with a WAS 6.20 ?

How to use the eventing and databag with a WAS 6.20 ?
Is what there is a good guide for these services?
Thank's

In the raise event you can pass the value
like below.
<SCRIPT>
function raiseEvt(value1){
if(window.document.domain == window.location.hostname){
if ( document.domain.indexOf(".") > 0 ) document.domain = document.domain.substr(document.domain.indexOf(".")+1);
   EPCMPROXY.raiseEvent( "urn:com.sap:BWEvents","BWiViewevent", value1, null );
// alert('tree domain'+document.domain);
</SCRIPT>
and in the
subscribe event you can get the values like below.
<script language="javascript">
if(window.document.domain == window.location.hostname){
document.domain = document.domain.substring(document.domain.indexOf('.')+1);
    EPCMPROXY.subscribeEvent("urn:com.sap:BWEvents","BWiViewevent", window, "myreceiveEvent");
function myreceiveEvent( eventObj ) {
      document.forms[0].gp_hidden.value = eventObj.dataObject;
</script>
Also look at the following link for a complete documentation.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/Enterprise%20Portal%20Client.pdf
Regards
Raja

How to find the job and job status from RSPCM

hi all,
suppose we got an error and in rspcm the process was failed.i want to know the status of that particular job.and if any i want to stop that job in SM37.
plz tell me how to find the job and job ststus from RSPCM...and how to stop that job in SM37
thanks,
jack

Hi Jack,
RSPCM: T.Code
This transaction is used to monitor the process chains
First:
here you need to add the process chains into the sheet
Second:
Then you can monitor the process chains in this transaction code
Like you can see the : status ,proces chain ,Last run date ,Last run time ,Log ID
Status : Green when sucessful,Yellow when running & Red when you get errors
Now when yoy click on any of the process chain in RSPCM you will go to the LOG VIEW as you see in RSPC transaction
SM37:T.code
This transaction is used for Job Overview
you can see many options in SM37
like Released,active,cancelled,finished,etc
Just select the ACTIVE jobs and also pass STAR in JOB ID & USER ID
here you can only see the active jobs
Goto Step in toolbar
select the program displayed
then chose option GOTO - Variant in main menu bar
in the variant you can see the job belong to which Process chain
if you want to cancel this job come back to SM37 Display screen
Select the Job and select the JOB DETAILS tab in Tool Bar
Collect the WIP ( Work Permit ID)
Go to SM50 T.code and find the WIP
in Main Menu Bar you find the option Cancel with Core choose this it will cancel the Job
Regards
Hari

How to hide the Print and Export button in analytics report or tasks pane

Hi Experts,
In BIEE 11g,
How to hide the Print and Export button in analytics report or tasks pane ?
For example:
In console,I have created one userA which is belong to BIConsumer GROUP , when I make use of the highest user 'weblogic' to create one simple report, then the userA will login the analytivs to view this report (not dashboard), it will show the print and export as below.So customers do not want to give him the privilege for printing and exporting.
In addtion, go to catalog->tasks(left corner), it will also show the print and export button. So how to hide or not access these button?
Note: Maybe it can use the policy for consumer role for implementing this requirement, but I do not know how to modify the policy. Are you facing the problem? Thanks.

Hi,
1. Create seperate folder for Reports & Dashobard.
2. For BI_Consumer (userA) set the catalog permission to view Dashboard Folder only and remove permission on the Report Folder (you can give traverse permission but don't give Open permision).
3. By this user won't be able to open or run any reports in that folder and the only way he can see the reports is through Dashboard and on dashboard the export and print buttone can be removed very easily.
Mark helpful if it helps.
Regards,
Kashi
Edited by: K N Yadav on 24 May, 2013 1:51 AM

Failover clusterign... How similar do the primary and failover instance need to be in a failover cluster?

How similar do the primary and failover instance need to be in a failover cluster?
Does the number of database have to match, naming, general config etc...
Mr Shaw

In failover clustering, you use shared storage so the number of databases is irrelevant since only one node can see/access the shared storage at any given point in time. Ideally, the server configuration should be the same on all of the nodes to minimize
potential issues that may impact downtime. However, you need to consider licensing/# of CPU-cores and implementation cost, especially if you are only using the other nodes as standby. As far as licensing is concerned, the standby has to have the same or fewer
number of CPU-cores as the primary node to be covered by licensing. Besides, you don't want your standby node to be more powerful than your primary node. This is why the option to have a hybrid deployment of having a physical server as the primary node and
virtual machine for standby nodes is now supported.
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

HOW TO SEND THE REPORTS AND THROUGH XI TO NON -SAP SYSTEM

Hi Experts,
I want to know how to send the reports and smartform through xi to another system. All the post blogs are just explaning only about the FILE-TO-FILE, FILE-TO-IDOCS scenarios only.

Hi,
XI is the middleware that to be used to transfer the data between various systems and even you could design the Business Processes with it.
In R/3 the smartforms, are generally converted to PDF and then have to send it across to Non SAP systems. Similarly you can convert the smartforms to pdf format and keep it on application server. XI will pick up that pdf and will send it to Non SAP system either as mail or as an attachments.
ABAP reports are normally used to re-present the data. If you need to transfer this data across the Non SAP systems then you have the IDOCs to be generated, RFC or ABAP Proxy to integrate this data with Non SAP system.
XI is not restricted only upto file to file or file to IDOC scenarios. It have enormous capabilities to involve various Business Processes as well integrate various SAP or Non SAP systems.
If need anymore specific details, please let us know.
Thanks
Swarup

Problems about How to Merge the Masthead and the Tool Area?

I have been struggling for many weeks about how to add the ToolArea into the Masthead. Can someone please help me?
I followed with the tutorial :[How to Merge the Masthead and the Tool Area|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f058ef9c-b211-2a10-4fad-8b88d5a1fe74?QuickLink=index&overridelayout=true]
I followed every steps mentioned in the tutorial but end up with these:
1. In this tutorial there is a word:Just before the link table is ended, add another row for the tool area. Unfortunately I am not familiar with JSP so can anybody please tell me the accurate inserting location of this code.
2. Besides I find there are some faults in this tutorial and It is non't very complete.
    For example the author have non't refer to two jar:
    I have copyed the (com.sap.portal.navigation.masthead_core.jar, com.sap.portal.navigation.toolarea_core.jar).from the     standard par files and paste these JAR files in the PORTAL-INF / lib folder in the NWDS.
   who can tell me there are additional faults or complements about this tutorial?
Please suggest.
Best Regards
lexian

Hello Prashant：
   I have imported the par file which you just send for me, Fortunately It is running OK！
   I am very happy,thank you very much,you give me a great help.
      I hope obtain you help for the future,you are a goo person.
     Thanks a lot!
     Best Wishes for you!
     lexian.
Edited by: le xian on Apr 22, 2011 10:43 AM

How to view the first and the last frame of a clip or a selected range in the time line?

How to view the first and the last frame of a clip directly or in a selected range in the time line ? Up arrow and down arrow keys changes only between the first frame of the consecutive clips. Even ; and ' does the same. I mean what is the shortcut keys for first to last and last to first frame of a clip? Help please.

SELECT PurOrderNum,
OrderDate
FROM
SELECT PurOrderNum,
OrderDate,
MAX(OrderDate) OVER (PARTITION BY DATEDIFF(mm,0,OrderDate)) AS MaxDate,
MIN(OrderDate) OVER (PARTITION BY DATEDIFF(mm,0,OrderDate)) AS MinDate
FROM Purchasing.PurOrder
WHERE OrderDate >= '2013-02-28'
AND OrderDate <= '2014-12-29'
)t
WHERE OrderDate = MaxDate
OR OrderDate = MinDate
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to Deactive the Organisation and Group in BP tcode?

Hi All,
In CRM, Tcode BP, In the Application Toolbar Objects like Person,Organisation and Group.
In that How to Deactive the Organistaion and Group.and the Person should be active only.
Please let me know it.

A simple solution would be:
Goto transaction 'BUSD' (transaction to maintain roles).
Select the role '000000'(Business Partner -General) -> Click on theDetails (CtrlShiftF2) in the tool-bar above. In the new screen showing the details of the role disable the Category 'GROUP' for thisrole. This would disable the 'Create Group' button in the 'BP'transaction.The role '000000' is the basic role for a partner. If the requirement is to disable the group button for all the roles -> Follow the same procedure for the remaining roles.
Edited by: Smita Singh on Jun 30, 2008 2:00 PM

No portal, only EBPuFF06SUS, vendor how to reply the bid and auction?

Similar Messages

Maybe you are looking for