No reaction entering number "1" and "+" in math-mode

When I try to write an equation in FM9 there is no response on typing the number "1" and the plus-sign. This is independent from operating-system xp or vista. Has anybody made the same experience? Is there any solution?
Raimond Dallmann

Raimond, could you let us know which specific version of FM 9 you're using, from Help > About, the "pxxx" numbers. Be sure you have the latest update:
http://www.adobe.com/support/downloads/product.jsp?product=22&platform=Windows
Second, check what fonts you have installed and are using for the equations:
1. in the top left of the equation palette in the "Equations" dropdown, select "Equation fonts" and let us know what is displayed in each of the entries.
2. check your installed fonts, to see whether you might have two different Symbol fonts installed -- people often have trouble if they have both a TrueType version and another one, either OpenType or Postscript. The font gurus from Adobe caution very strongly about having multiple Symbol fonts on the system.
With luck one of the other folks who uses the equation editor will be able to jump in with any other troubleshooting steps.
Sheila

Similar Messages

IMEI number unknown and in recovery mode, after putting sim card back in ?

Got my phone back today from the phone shop as the charger block needed replacing, as it wouldn't charge as it had shorted out.
Phone was working fine when got it back for good few hours without the sim in it, then when I put my sim in it went all AWOL and went into restore mode with message (IMEI number unknown) & (ICCID unknow).
The phone was on a contract with o2 and then after it finshed, was unlocked to any network by them for a pay as you go sim phone, which it has been for the last 18 month's.
I've read I may have to restore it but as there's many photo's, videos on there, they would get wiped off completely. It's running IOS 4. summit as never upadated due to not having enough room on my hard drive to ever put all the content on it for to do so, so I kept it the same and not backed anything up. Which I should of done but never had enough room as the hard drive pretty smal on the laptop, and the stuff on there thats important to delete to make space.
So if anyone knows what to do or can help that be great thanks cheer.

Once in recovery mode, all data is lost, there is nothing to recover.
The missing IMEI number suggests a serious hardware failure.
Buy a new iPhone.
Apple will not touch the device since it's been opened by someone other than Apple.

Attempting to install Adobe Acrobat 7 installer isn't recognizing my product serial number as a valid serial number. I tried entering it with and without the dashes and neither methods work. What should I do now?

I bought a new computer and I'm attempting to install my older Adobe products that I still use, Adobe Acrobat 7 is the issue for now. I followed the instructions on the Adobe site for installing the older apps, but the installer isn't recognizing my product serial number as a valid serial number. I tried entering it with and without the dashes and neither methods work. What should I do now?

You cannot use your original files and serial number. See the following for the files you need and the associated serial number(s)....
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Trying to activate serial number after entering redemption code and continues to say invalid serial number. Installing on Server 2012 R2 for client using RDS. HELP.....

trying to activate serial number after entering redemption code and continues to say invalid serial number. Installing on Server 2012 R2 for client using RDS. HELP.....

Thank you guys for the quick answer! Muche appreciated
I've tried all suggested solutions, but no luck :-(
- tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation. All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
> is not for 2012 R2.
For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
"SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! "

After more than a year I am being asked to enter my serial number again and when i enter it it no longer works

After more than a year I am being asked to enter my serial number again and when i enter it it no longer works

Same here. Called support and waiting for someone for more than an hour now!!!
Adobe, please fix!

TS1292 I have removed the film over the code to enter into iTunes and it appears to be missing some of the code. I purchased this on 7/31/12 from bed bath and beyond in Germantown Maryland. How do I get the number to redeem this 25.00 iTunes card

I have removed the film over the code to enter into iTunes and it appears that some of the numbers/letters are missing. How do I get to redeem this card?

iTunes Store: Invalid, inactive, or illegible codes

MIGO tr Serial number field and table?

Hi guys,
can anybody tell me how to find the field name and table for Serial number in MIGO tr Code?
in MIGO the Serial number field and Structure are GOSERIAL-SERIALNO.but i was not able to find the Actucal Field name and table where i can get the values based on PO and Asset Number's?
Thanks,
Gopi.

Hello,
I'm looking at the same problem here. I found the table SER03 in which you can enter the the material document. This returns 1 line in this table and from this one you need the OBKNR element
You can copy this data and paste it into table OBJK element OBKNR and this returns all serialnumbers for the relevant material document.
My problem is that i can't get these items on the sapscript. (WESCHEINVERS 1,2 or 3)
Greetings
Edited by: Lode Vandecruys on Apr 9, 2008 11:04 AM
Edited by: Lode Vandecruys on Apr 9, 2008 11:09 AM

Field to add to enter number of items which are shipped to customer

Hi Sap Experts,
We have scenario, we have created sales order with quantity 1(Like soft copy or hard copy of CD).
Now we want to create delivery with sales order and quantity is 1(Copy from sales order).
Our requirement is some time we have to send additional things like hard copy of manual or complement gift which we are not entering in sales order.
Exp: Sales order- quantity 1.
Want to deliver quantity 1(+ manual+ complement gift, these items are not part of standard order)
For more clarity, we have to add one field and want to enter number (How many items we have send along with main materials and these items are not relevant for pricing also).
So requirement is add one additional field in delivery header/item.
Customer doesn’t want to use Free of goods or BOM which we have propose him. How to customize standard table and standard program.
Kindly suggest.
Regards,
Kotli
20

Hi,
Thanks.We want to add a field, might be like this.We just want to enter only no of extra items like 3.
Exp.
Delivery Qty-1
extra items:3
Regards,
Custom field to add number of packages shipped along with Delivery

VFX3 ERROR:Enter a Name and City for one-time account postings (F5 266)

Dear Colleagues.
Finance are teying to release a billing doc to Finance on VFX3 and getting the error below.Is it something not maintained correctly somewhere (Customer Master,etc)?
All help greatly appreciated,
PAPJ1
Error Log
             0010056707 000000 Document 0010056707 saved (no accounting document generated)
             0010056707 000000 Enter a name and city for one-time account postings
            Technical data
                Tech. data details
                 Client
                 Group Number
                 Sales Document Number                  0010056707
                 Item Number of the SD Document         000000
                 Schedule Line Number                   0266
                 Counter in Control Tables              00
                 Message Identification                 F5
                 System Message Number                  266
                 Output Type                            E
                 Message Variable 01
                 Message Variable 02
                 Message Variable 03
                 Message Variable 04
                 Group Type

Hi.
The system logic is the following:
In the master record of your one-time account, there is a field called
'Reference account group'. The field status settings of the account
group entered here are relevant for the one time vendor screen.
Please note that even if the fields are changed from mandatory to
optional if the NAME and CITY of the One Time Vendor is not filled, the
system will still prompt the Error Message F5266.
If you do not enter the name and city you will receive error F5266.
The system logic here is to make sure that the name and the city being
keyed-in properly for the Executive Information System reportings.
Please note that it is hard-coded in the system.
Check the following notes
604312
587806
548834
513748
512360
Also if you are using any bapi to post the document, you can resolve the issue pass-in 'Name', City and Region field values in BAPI while creating the billing document.
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista

In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards.

In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards. We enter various pieces of data, other than the standard name address & phone numbers and we print all information on each card so it fits in a 5x7 inch loose binder. We have used InTouch software for many years and it has served us extremely welll, however, the publisher (The Prairie Group) has not, and apparently has no plans to update their software to be compatible with any Mac OSX OS beyond 10.6. Any help will be appreciated!

You can select what you want included in a list format. In the Print command from Contacts, click the Show Details button. Then in the Style pulldown menu select "Lists" and there you'll be able to select what you want included. You can also select what you wish included if you select the Pocket Address Book style.
If neither of those options will work for you, then you will need to look to third-party software. Here's one possibility that seems to get good reviews:
https://www.macupdate.com/app/mac/15485/labels-&-addresses
I haven't done more than try it to make sure that it works with OS X 10.9's Contacts, which it does, but you can download their demo and try it yourself.
Regards.

When I turn on my iMac, it shows a black screen and says 'No bootable device - enter boot cd and press any key'. Not sure how to fix this.

When I turn on my iMac, it shows a black screen and says 'No bootable device - enter boot cd and press any key'.
I'm not sure what to do, I did not recieve a cd with my mac to boot it up (I ordered it online).
Also I can't find my harware serial number (I've tried many times to input what I thought it may be from my receipt). I saw that I need this number to contact apple support, my 90 day complimentary support is still valid so I wish to contact them.
I don't know much about apple products as this is my first apple computer so any information is helpful.

Hold down the Alt/Option-key at startup of your iMac to get the Boot Selection screen.
From that choose to boot into OSX.
Once in OSX go to System Preferences then Startup Volume and reset your OSX to be the default.
The new iMacs have OSX 10.7 Lion preinstalled and don't come with any CD/DVD anymore.
Instead OSX Lion includes a new feature called "Lion Recovery".
Have a read here About Lion Recovery
Stefan

Error while entering number range

Dear All
While entering number ranges for Assets using t-code AS08 i am getting the following error:
Company code........ 2000 does not exist
Message no. NR011
The company code 2000 is assigned to Chart of depreciation also.
Please advice.
Thanks & Regards
Kanwaljit

Hi,
In AO11, for your company code 2000, you might have assigned a diff company code for number range as cross company code asset number range.
Change it to 2000 and then go to AS08 and enter 2000 and enter the required number range intervals to it.
Thanks,
Srinu

I create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

i create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

The code they are asking for is the last three digits of the number on the back of the card (you don't use this when using an ATM or presenting the card in shops).

Internal number assignment not defined (please enter number)

Hi gurus,
I am trying to recreate a PO with the BAPI BAPI_PO_CREATE but I always get the following error message 'Internal number assignment not defined (please enter number)'. Can anyone assist please
Regards,
Thandi

Hi,
Are you passing the purchase requisition number?
Possibly you cannot use that.
Check the same.
First try creating a PO via ME21N with the data you have.
Check if you face any problems and then try with the BAPI.
It will save a lot of time in investigating the errors.
Regards,
Ankur Parab

Aperture forgets it license and asks me for the serial number over and over again

Hi,
This is getting ridiculous to the point where I'm thinking of just ditching Aperture. It's continually forgetting is license and asking me for the serial number over and over again. I have the original serial number and an upgrade number when I upgraded to v3, but right now, it's not accepting either of them. What's going on and how do I fix it permanently?
Thanks,
Rob

Rob, have you upgraded to Aperture 3.4.3? This is supposed to have fixed the serial number problem:
http://support.apple.com/kb/DL1610
About Aperture 3.4.3
Addresses an issue that could cause a licensed copy of Aperture to prompt for a serial number with each launch
Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise can it not be stored.
Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library, and this requires read/write access for administrators. Do you enter your serial number using an administrator account?
When did this start? Have you migrated your system from from another mac? Then you still may have an older ProAppSystemID file or Aperture cannot write to the System Library.
To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
Quit Aperture.
Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see the file there, move it to its proper location.
In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
Regards
Léonie

No reaction entering number "1" and "+" in math-mode

Similar Messages

Maybe you are looking for