After more than a year I am being asked to enter my serial number again and when i enter it it no longer works

Same here. Called support and waiting for someone for more than an hour now!!!
Adobe, please fix!

Similar Messages

After more than a year of success, email will not sync

After more than a year of successfull syncs with iTunes, my iPhone GS will not sync with my Outlook Calendar. I get the message, "Either there is no default mail client or the current mail client cannot fulfill the messaging requrest. Pleae run Microsoft Outlook and set it as the default mail client."
The problem with complying with that message is that I DO NOT use Outlook as my default mail client on my PC. I DO use Outlook for my Calendar on the PC and have, in the past, been able to sync with the iPhone calendar.
On the iPhone, I can receive my email from GMail and another provider without problem. On my PC, I use Forte Agent as my email program.
I know of nothing that I have done to change settings an any program that would affect the ability to sync my calendar with outlook but NO NEW calendar entries are reaching my iPhone now. All other portions of the sync appear normal.
Any help would be greatly appreciated.

Subject correction. It should read: After more than a year of success, Outlook Calendar will not sync.
It appears that there are a VERY large amount of problems with the calendar not performing sync correctly. Any answers...?

How do i find which Apple ID is associated with music in my iTunes? When I sync with my iPad and iPhone it tells me I have music, apps etc from more than five IDs. I am asked for PW for a number of now extinct accounts.

how do i find which Apple ID is associated with music in my iTunes? When I sync with my iPad and iPhone it tells me I have music, apps etc from more than five IDs. I am asked for PW for a number of now extinct accounts.

Go to Settings/icloud. The Apple ID at the top of the screen is the only one you need to be concerned about. That one MUST be a working ID, and you must know the password for it, or you will be unable to use the phone if it ever crashes, you want to update it, or you want to sell it.

I'm being asked to provide a serial number when I try to access Illustrator after downloading it to my desktop. Where would I get a serial number for Adobe Illustrator?

I'm being asked to provide a serial number when I try to access Illustrator after downloading it to my desktop. Where would I get a serial number?

Normally you would get a serial number when you purchase the software. Which version are you asking about?

After repairing permissions, in Mac OS X, I ask the utility to verify permissions again and the same problems are shown, as if I had not repaired anything. What's happening?

After repairing permissions, in Mac OS X, I ask the utility to verify permissions again and the same problems are shown, as if I had not repaired anything. What's happening?

What you are seeing are messages. It's ok.. it won't do any good to repeatedly repair permissions. As long as you see Repair Permissions Complete when it's finished, you are good to go.
Also, if you see any messages that say: SUID: That can be ignored.
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
Keep in mind, the only time you need to repair permissions is for troubleshooting.

CS6 asked after more than a year again ID

ter more than one year using CS6 photoshop, it asked fot the serial number. After i fill this it sai I am not using the rigt number. But in My Adobe its the same. After restarting CS6 again it said I am using a demoversion. So how can I things right to use CS6 again?

If CS6 is not activated it will run as a 30 Day trial version. Menu Help should show that. The cs6 your running should be have Activate item not a deactivate item in the help menu list of items. Make sure you copied the serial number from Your Adobe My Product CS6 correctly. And try to use the Activate item in the help menu. It should ask for your serial number. If ir does not take it call Adobe.

TS1277 after installing itunes, my computer won't recognize my cdrom/burner any longer. Worked ok before and I have uninstalled itunes and it works again and when I reinstall itunes it won't work again. I have also went into registry files and deleted

After installing itunes, my desktop computer doesn't recognize my internal cd rom/burner. I removed itunes and it works ok and when I reinstall itunes it won't work again. I went into the windows registry files and deleted the lower filter which is one correction for this and it worked ok until the next itunes upgrade and now it won't work again. If anyone knows what to do please let me know. My device manager shows a code "10"

My device manager shows a code "10"
That suggests an AFS.sys issue. But we'd better doublecheck.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". (If you're running iTunes 11.0.x you'll need to bring up your menu bar first to see the Help menu.) Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

How do register for final cut express which came pre-installed? i'm being asked to provide a serial number - how is that possible?

how do i find the serial number for software that was pre-installed on my imac? it's the final cut express software - which i can't use without the serial number .... help, please! d.s.

When you purchase a computer from Apple with pre-installed software it comes with the OS install discs, the iLife install disc, and any other installation discs. You should have an FCE installation disc. The serial number should be on the disc.

MS Office Professional Plus 2010 cannot verify the license (in use for more than a year)

After more than a year of use, I now receive the following error message for all Office Applications ....
"Microsoft Office Professional Plus 2010 cannot verify the license for this product. You should repair the Office program by using the Control Panel." When I Click the OK button, the application is terminated.
I tried using the Control Panel to repair Office, and I have tried to re-install Office. I still get the same message. Note, during repair or installation, my Product ID key is accepted.

It is working. If you have 64bit machine please type cd C:\Program Files (x86)\Microsoft Office\Office14 --> cscript
ospp.vbs /act
Thank you

Error message "Transfer date 30.06.2007 is more than one year after the clo

Hi SAP expert,
I received error message "Transfer date 30.06.2007 is more than one year after the closed fiscal year" - message number AC 187. Used Tcode OAAQ when tried to reverse year end closing for depreciation area. How can i correct this problem? I want to finish for the whole year 2007 depreciation.
Hope u guys can help me. Thanking u in advance.
Regards,
Nazrul

Hi SAP experts,
any solution for my porblem?
TQ

When I OCR two versions of the same document and then compare th documents in Acrobat Pro XI, I usually get the message that there are no changes to mark. However, I know there a quite a few number of changes. I raised this question more than a year ago

When I OCR two versions of the same document and then compare the documents in Acrobat Pro XI, I usually get the message that there are no changes to mark. However, I know there a quite a few number of changes. I raised this question more than a year ago, and the response I received had to do with the quality of the OCR and the scans of the documents. However, if I use Acrobat Pro XI to save the same documents in Word and then run a comparison in Word all of the changes are marked. When a PDF is saved as a Word document in Acrobat Pro XI, is a different OCR module being used than the one used in Acrobat Pro XI for text recognition?

OCR is only for recoginition of the image / picture of text provided by an scanner.
Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image or picture of text - it is the digital text. So, no OCR involved.
When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
Once OCR is performed it is the OCR output that is exported.
OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents".
Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
being processed with Acrobat Pro's Compare can certainly be done.
But - well you've described what can be observed.
Be well...

Have a mac more than 5 years old need to update software but i dont know how? what update do i need? any help appreciated.

im trying to update the softare on my mac book, initially itunes but it wont update due to the software being behind. since my mac book is more than 5 years old i cant get the support from the apple website. so some knowledge from the community would be great. ill try and help what i can but not very computer literate

You need to buy and install a Mac OS X 10.6 DVD, and then run Software Update; 10.6.8 is sufficient to run the latest version of iTunes.
(76780)

Extending periodic billing plan to more than a year?

Hello,
I am able to create a billing plan for a sales order for anything less than or equal to an year. The billing schedules are being created just fine.
However, I am unable to figure out how I can do the same things for any length of duration (more than 1 year). I believe the Horizon is what is restricting it to <= 1 year. There need to be some thing which needs to be done with Horizon.
Any help with sequence of step will be greatly appreciated.

In OVBS I did define a new "Rule for Date Determination" as Z1:
Baseline date = 02 (Contract Start Date)
Time period = 18 (Months)
Time Unit = 3 (for months)
Last of the month = A
Now, when I come back to OVBI for Billing Plan Type = 02, I have the following setup:
In "Origin of General Data" section, I have:
Start Date = 11 (Contract Start Date)
End Date = 09 (Contract End Date)
Dates from = 11 (Contract Start Date)
Dates Until = 09 (Contract End Date)
Horizon = 52 (Horizon 1 Year)
The problem in the above scenario is that I am unable pick the Z1 int he pull down of the Horizon field. It does not show up the whole list of choices which is available in OVBS transaction.
I am assuming I should be just able to do F4 on Horizon and pick Z1 and then I will be set. But, the choice does not appear.
I am puzzled. Any input?

Display UWL inbox items more than a year

Hi,
How to show items in UWL inbox more tha a year. Currently in personalization option provides items upto 1 year.
Is there any options available to show items more than a year?
Kind Regards,
Mukesh

Hi,
I have a question on UWL.
Is it possible to delete the alerts or notifications by user?
And is there any UWL configuration to make the tasks/alerts/notifications expire after certain duration (say after 2 days the notification should not appear in the inbox of UWL.)
If it is possible, where we have to set the property?
Please provide your inputs.
Thanks in advance.
Regards,
Ponneswari A.

ICal for iPad not showing events more than 2 years in future in Year view

As the subject describes, I can create an appointment more than 2 years into the future. On my Mac and iPhone I can see the event using any view. It is also visible in all views on my iPad, except for the year view. A feature?

Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
Then reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

After more than a year I am being asked to enter my serial number again and when i enter it it no longer works

Similar Messages

Maybe you are looking for