No Response From Application Server - How To over come this error message
I am Using Oracle 10g Application server. if we run a report from our front end - jsp , if the transaction takes more than 10 minutes then 'No Response From Application Server ' error message is coming in browser. How to over come this. whether i have to set any transaction time in application server. If anybody knows this kindly give reply immediatly.
There are settings in the reports configuration to modify your timeout. This is documented in the repors config file itself.
cu
Andreas
Similar Messages
-
No Response From Application Server-how to overcome this error message
I am Using Oracle 10g Application server. if we run a report from our front end - jsp , if the transaction takes more than 10 minutes then 'No Response From Application Server ' error message is coming in browser. How to over come this. whether i have to set any transaction time in application server. If anybody knows this kindly give reply immediatly.
Can you provide additional background information? Is this a in-house application serviced through an OC4J container or a Report from the Middle Tier install?
Is this request being front-ended by an OHS server? Are there firewalls involved?
Regards. -
How to over come this error ???
hi all....
i have the following error constantly..
how to rectify this error ??
error:
[mxmlc] C:\Documents and Settings\indukl1\Workspaces\MyEclipse 8.5\flexuploader\flex_src\FileUploader.mxml(859): col: 3 Error: The element type 'mx:itemRenderer' must be terminated by the matching end-tag '</mx:itemRenderer>'.
[mxmlc] </s:Application>
[mxmlc] ^
BUILD FAILED
C:\Documents and Settings\indukl1\Workspaces\MyEclipse 8.5\flexuploader\build.xml:111: mxmlc task failedHi,
This error is because to close the tag you need to close it with proper tag.
<mx:itemRenderer>
Data you want to show over here
</mx:itemRenderer> -
No Response From Application Server - Oracle 10g
I am Using Oracle 10g Application server.
When running a transaction (query to the DB) sometimes it takes more than the "x" session.timeout minutes seted.
Then 'No Response From Application Server ' error message comes out.
I don`t want to increase the session.timeout minutes because i do want it to work in other issues. The thing is that i don`t want the session to be terminated when waiting for the response from the DB.
How can i overcome this?
ThanksThanks for answering...
Sorry, i`m new in this. I`m using j2EE technology.
The thing is that i was trying to do a page that prints a loading... while waiting for the response from the DB, but when it comes the resultset, and i redirect to another servlet to print the results, an illegalStateException came out (the response has already made the commit).
So i was thinking maybe there was a solution for the application to know that the query is being made in the DB(and that the app/session isn`t stopped).
Maybe with another driver? now i`m trying the ojdbc14.jar.
Or maybe in J2EE I can do a page that self reloads every "x" minutes while waiting for the response from the DB as you said and when it comes prints it ?
Thanks a lot
Andres -
ERROR - No Response from application server
Hi all,
i'm hitting this error in my application server, i search and read some posts in this forum regarding the same subject, but, the only answer i got is "shutdown app server and start again"
It's very important that i understand and correct what is origin of this error , so i decided to create a new post.
My environment.
Oracle Application Server 9.0.4 (10g) under windows 2003.
Several users, from serveral applications reported then got "No Response from application server".
Here's what i got from logs:
WebCache (event.log)
[28/Sep/2007:15:37:07 +0100] [warning 14014] [ecid: 4522403843773,0] Receive request from origin server times out.
[28/Sep/2007:15:37:07 +0100] [error 11364] [ecid: 4642662928061,0] Network error response is returned.
[28/Sep/2007:15:37:07 +0100] [error 11364] [ecid: 4522403843773,0] Network error response is returned.
[28/Sep/2007:15:37:12 +0100] [detail] [ecid: 4333425287762,0] [client: 10.41.6.31] [host: bb-9ias] [url: /cotacoes/acor_cotConsPed.jsp]
[28/Sep/2007:15:37:12 +0100] [warning 14014] [ecid: 4333425287762,0] Receive request from origin server times out.
[28/Sep/2007:15:37:12 +0100] [error 11364] [ecid: 4333425287762,0] Network error response is returned.
[28/Sep/2007:15:37:14 +0100] [detail] [ecid: 4711382411904,0] [client: 10.40.51.10] [host: bb-9ias] [url: /wf_prod/acor_agendaNovasColoc.jsp?jboEvent=Sort&'pFlgDadosPesq=&'pFlgComPesq=&'pFlgEspPesq=&'pFlgGerPesq=&'pFlgTempoPesq=&'pRamoPesq=&'pDataPesq=&'pEscPesq=&'U
iNome=&'pMediadorNome=&'pEstPesq=&'jboEventVo=AgendaProcVO&'amId=Bc4jModule&'pParamSort=MED_NOME&'pSort=asc]
[28/Sep/2007:15:37:14 +0100] [warning 14014] [ecid: 4711382411904,0] Receive request from origin server times out.
[28/Sep/2007:15:37:14 +0100] [error 11364] [ecid: 4711382411904,0] Network error response is returned.
[28/Sep/2007:15:37:27 +0100] [detail] [ecid: 4402144779094,0] [client: 10.44.1.48] [host: bb-9ias] [url: /wf_prod/acor_editaProc.jsp?proc=61063&'dt=1190990239312&'pFlgDadosPesq=&'pFlgComPesq=&'pFlgEspPesq=&'pFlgGerPesq=&'pFlgTempoPesq=&'pRamoPesq=&'pDataPesq=&'pEscP
sq=&'UtiNome=&'pMediadorNome=&'pEstPesq=Emissão%20de%20Titulares&'pSort=desc&'pParamSort=PRO_DAT_INICIO&'linha=2]
[28/Sep/2007:15:37:27 +0100] [warning 14014] [ecid: 4402144779094,0] Receive request from origin server times out.
[28/Sep/2007:15:37:27 +0100] [detail] [ecid: 4608303209302,0] [client: 10.40.62.8] [host: bb-9ias] [url: /cotacoes/acor_cotRamos.jsp?pTime=1190989207512&'pKey=31094&'jboEvent=Mostra%20Ramo%20L&'ecra=consCot&'PrId=37412&'PedCompanhia=CSA&'PedTipo=C&'SitCodigo=2&'Sit
escr=Em%20Execução&'PedNumero=&'PedMediador=&'EscDireccao=&'EscZona=&'EscEscritorio=&'PedNome=&'PedDataI=&'PedDataF=&'pRamCodigo=&'pSitCodigo=&'Code=&'pParamSort=null&'pSort=null&'value=null&'RamCodigo=9&'RamDescr=Multi-Riscos%20Comercio%20(MP%20Negócio)]
[28/Sep/2007:15:37:27 +0100] [warning 14014] [ecid: 4608303209302,0] Receive request from origin server times out.
[28/Sep/2007:15:37:27 +0100] [error 11364] [ecid: 4608303209302,0] Network error response is returned.
[28/Sep/2007:15:37:27 +0100] [error 11364] [ecid: 4402144779094,0] Network error response is returned.
[28/Sep/2007:15:37:45 +0100] [detail] [ecid: 4007007807211,0] [client: 10.40.15.7] [host: bb-9ias] [url: /ConsultaSinistros/DadosSubSin.jsp?nid_claim=351017&'vn_claim=9001151241&'tstamp=1190990264562]
Apache (error.log)
[Fri Sep 28 15:37:45 2007] [error] [client 10.42.48.237] [ecid: 4007007807211,1] MOD_OC4J_0080: After calling Apache's ap_bwrite(), got
an return value: -1 and the client could have aborted in the middle of receiving the chunk data.
[Fri Sep 28 15:37:45 2007] [error] [client 10.42.48.237] [ecid: 4007007807211,1] MOD_OC4J_0058: Failed to handle response chunk data passed
in from oc4j via ajp13.
[Fri Sep 28 15:37:45 2007] [error] [client 10.42.48.237] [ecid: 4007007807211,1] MOD_OC4J_0035: After handling ajp13 response message,
got an invalid value: -2.
[Fri Sep 28 15:37:45 2007] [error] [client 10.42.48.237] [ecid: 4007007807211,1] MOD_OC4J_0121: Failed to service request with network
worker: oc4j_consultasinistros_15 and it is not recoverable.
[Fri Sep 28 15:37:45 2007] [error] [client 10.42.48.237] [ecid: 4007007807211,1] MOD_OC4J_0013: Failed to call destination: oc4j_consultasinistros's
service() to service the request.
[Fri Sep 28 15:37:55 2007] [error] [client 10.42.48.237] [ecid: 9418666609387,1] MOD_OC4J_0080: After calling Apache's ap_bwrite(), got
an return value: -1 and the client could have aborted in the middle of receiving the chunk data.
[Fri Sep 28 15:37:55 2007] [error] [client 10.42.48.237] [ecid: 9418666609387,1] MOD_OC4J_0058: Failed to handle response chunk data passed
in from oc4j via ajp13.
[Fri Sep 28 15:37:55 2007] [error] [client 10.42.48.237] [ecid: 9418666609387,1] MOD_OC4J_0035: After handling ajp13 response message,
got an invalid value: -2.
[Fri Sep 28 15:37:55 2007] [error] [client 10.42.48.237] [ecid: 9418666609387,1] MOD_OC4J_0121: Failed to service request with network
worker: OC4J_FerrProdutividade_13 and it is not recoverable.
[Fri Sep 28 15:37:55 2007] [error] [client 10.42.48.237] [ecid: 9418666609387,1] MOD_OC4J_0013: Failed to call destination: OC4J_FerrProdutividade's
service() to service the request.
[Fri Sep 28 15:38:34 2007] [error] [client 10.42.48.237] [ecid: 9298407565065,1] MOD_OC4J_0080: After calling Apache's ap_bwrite(), got
an return value: -1 and the client could have aborted in the middle of receiving the chunk data.
[Fri Sep 28 15:38:34 2007] [error] [client 10.42.48.237] [ecid: 9298407565065,1] MOD_OC4J_0058: Failed to handle response chunk data passed
in from oc4j via ajp13.
[Fri Sep 28 15:38:34 2007] [error] [client 10.42.48.237] [ecid: 9298407565065,1] MOD_OC4J_0035: After handling ajp13 response message,
got an invalid value: -2.
[Fri Sep 28 15:38:34 2007] [error] [client 10.42.48.237] [ecid: 9298407565065,1] MOD_OC4J_0121: Failed to service request with network
worker: OC4J_FerrProdutividade_13 and it is not recoverable.
[Fri Sep 28 15:38:34 2007] [error] [client 10.42.48.237] [ecid: 9298407565065,1] MOD_OC4J_0013: Failed to call destination: OC4J_FerrProdutividade's
service() to service the request.
[Fri Sep 28 15:38:37 2007] [error] [client 10.42.48.237] [ecid: 8954810184060,1] MOD_OC4J_0080: After calling Apache's ap_bwrite(), got
an return value: -1 and the client could have aborted in the middle of receiving the chunk data.
[Fri Sep 28 15:38:37 2007] [error] [client 10.42.48.237] [ecid: 8954810184060,1] MOD_OC4J_0058: Failed to handle response chunk data passed
in from oc4j via ajp13.
some thoughts ...This error is not happening consistently, it triggers near the end of month ,naturally the amount of requests in the end of month is higher .. am i hitting som e limit ?
Best Regards
Rui MadalenoNetwork error response is returned.
hi all,
i'm hitting this error in my application server, i search and read some posts in this forum regarding the same subject, but, the only answer i got is "shutdown app server and start again"
My environment.
Oracle Application Server 9.0.4 (10g) under solaris 9.
Several users, from serveral applications reported then got "No Response from application server".
Here's what i got from logs: LOGS event_log WEBCACHE
[08/Oct/2008:11:59:37 -0430] [detail] [ecid: 101795743162,0] [client: 172.19.1.120] [host: shcontingencia:7778] [url: /forms90/l90servlet;jsessionid=ac13041fce663ec96491934459ca516f5215b31fb0c.qQvxpQTOokTBnkTxok4UaNaKaxD3lN4RawSLcgSO-xaL-xbzmQnAnwSLak8RnhfzbNqKc2SHc30Ka2bvmRbzp3zD-BbCmQXIr6zInQjImQzv8N8Sc38MbNmLa2b48OX3b4DteyztfAXMplaxn6jAmljGr5XDqQLvpAe_]
[08/Oct/2008:11:59:37 -0430] [warning 14003] [ecid: 101795743162,0] Error while receiving response from the origin server
[08/Oct/2008:11:59:37 -0430] [error 11364] [ecid: 101795743162,0] Network error response is returned.
[08/Oct/2008:12:50:55 -0430] [detail] [ecid: 88913989443,0] [client: 172.19.1.39] [host: shcontingencia:7778] [url: /forms90/l90servlet;jsessionid=ac13041fce67b31f32050664119ba348b92e845aaa4.qQvxpQTOokTBnkTxok4UaNaKaxD3lN4RawSLcgSO-xaL-xbzmQnAnwSLak8RnhfzbNqKc2SHc30Ka2bvmRbzp3zD-BbCmQXIr6zInQjImQzv8N8Sc38MbNmLa2b48OX3b4DteyztfAXMplaxn6jAmljGr5XDqQLvpAe_] -
In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.
Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling -
How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.
You probably don't need the hard drive and optical drive specs, but here they are?
======================
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS -
How do I fix this error message??
How do I fix this error message
"This message could not be delivered and will remain in your Outbox until it can be delivered.
The SMTP server "smtp.mac.com" doesn't support TLS (SSL) on port 25. Please check your account settings and try again."
ThANK YOU!!!
RichMail Help has some articles devoted to sending problems, e.g. “I can't send email” or “I can't send email because the connection to the server on port 25 timed out”. You may want to take a look at them in case there is something there that applies to you.
Something that usually works if you’re trying to use an outgoing (SMTP) server different from the one provided by your ISP (and in the case of .Mac in particular) is changing the outgoing server port to 587 instead of 25 in Preferences > Accounts > Account Information > Outgoing Server Settings. -
how can I solve this error message? "Some of your photos, including the photo “IMG_0374.jpg”, were not copied to the iPad “(my name’s) iPad” because they cannot be displayed on your iPad."
There were 273 photos in the event syncing from my Mac, but only the last 103 made it to the ipad. Most of the photos were taken by an iphone. I would appreciate any thoughts or insights - thanks.Adrian-
That error message suggests the photo is somehow corrupt.
Do you have the Apple Camera Connection Kit? You can set up a USB thumb drive with MS-DOS FAT-32 format and copy your photos to it into a folder named DCIM. Assuming they have an 8 character plus suffix name, the iPad will recognize them and give you the option of transferring them via the Kit's USB adapter.
Once they are transferred, you can find out if there is a problem with any.
Fred -
My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd. -
How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.
Hi j,
I don't know if this will work, but I'd try logging in to an admin account, going to your main library (not user library), opening it, opening Application Support, selecting iPhoto, hold down the command key and press i, click on the lock in the lower left, entering the password and making sure you have Read & Write privileges for System and Admin. -
I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?
See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
How do i fix this error message: UnsubMailPluginMailAppOSX ? n't)
When I open mail I get this error message: UnsubMailPluginMailAppOSX
I have Macbook pro 10.6.8. I am not a tec savvy person, please answer in simple words. Assume I do not know terminology (because I don't).
Thank you.Quit Mail. Back up all data.
Triple-click the line of text below to select it, then copy to the Clipboard:
/Library/Mail/Bundles
In the Finder, select Go ▹ Go to Folder from the menu bar. Paste into the box that opens, then press return.
A folder may open. If it does, move the following item in that folder to the Trash:
UnsubMailPluginMailAppOSX.mailbundle
You may be prompted for your password when you do this.
Launch Mail. -
Error generating Web service /BIC/CQZDS_WEB00001000 how to over come this?
HI,
Experts,
I have created Web service source system by taking: target system BI and source system XI.
After creation of Info objects i have created data source in RSA1 there will no error displayed while CHECK but while activating the data source it was displaying errors like:
1) Error generating Web service /BIC/CQZDS_WEB00001000
2) Error when activating DataSource ZDS_WEBSERVICE BIDCLNT100
what will be the reason for this error plezase provide me good idea or provide step by step web service scenarious.
Thank you,
Shabeer Ahmed.Hi
Web AS 6.40 you can create a Web Service Proxy directly in Transaction SE80. Create a new package and right click on it. Choose Create -> Enterprise service / Web service -> Proxy object. Now you can choose how you want to provide the WSDL Source.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80fa3dff-ce76-2a10-3f94-f3df8f2db5a2 -
How do I fix this error message - "sparse bundle is already in use"
Lately, I have been getting the following message that says:
The backup disk image “/Volumes/Kaminski Family Time Capsul/Keith (2).sparsebundle” is already in use.
How might I fix this? Thank you for your time.Unplug the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This will fix this issue 98% of the time. If you are in the unlucky 2%, more help is here:
The Backup disk image ... sparsebundle ... is already in use.
Maybe you are looking for
-
Ram related kernel panics on a MBP (ram used to work, hardware errors-)
hello all i have a 2.2GHZ intel core duo 2007 MBP, which once ran Tiger and is now running 10.6.3 I had the NVDIA graphic card break down associated with such models, and it was replaced thanks to the extended care plan, here in Paris, so the logicbo
-
When I have another window open for another application, and then I click on my browser window to search, go to bookmark, etc., wherever I click on the page (which is an empty space on the page, unless it is a border graphic), it automatically goes t
-
I want to change or delete Username.
I want to change or delete Username.
-
I make some chnages on PDF but then get an error (110) and cannot save. What is the problem
-
Itunes has stopped working error keeps popping up and it shuts down my itunes
Hi, Everytime I go into my itunes store it gives me a error that itunes is shutting down. WHY? and what do I do to stop this and get back to purchasing itunes?