No Return Label for Router return

I received a new router for my broken one. I am suppose to return the old one with in 7 days. Do not know where to send it, since you did not send me a prepaid return label.

How old is your current router? Have you tried asking Verizon to send a return label, letting them know of the situation (in case they did say you will absolutely be billed for non-return)?
========
The first to bring me 1Gbps Fiber for $30/m wins!

Similar Messages

Branch operation and return operation for routing in alternative sequence

Hi all experts.
I would like to ask which table and field store the value of branch operation and return operation for routing in the alternative sequence. I can only find them in structure (PLFLD-VORNR1 and PLFLD-VORNR2) but I want the table field of them. Would anyone please suggest a solution? Thank you.

Hi,
look in table AFFL, here the BKNT1 and BKNT2 refer to those vornr1 and vornr2 of the operation. For example in user-exit ZXCO1U01 you will find the values (BKNT1/2) in the sequence table, and when, for example, filling the LOIPRO01-Idoc, you can use the found VORNR for the E1AFFLL-segment.
See coding for example on determining VORNR1/2 (sequence_table/operation_table as in user exit EXIT_SAPLCOBT_001):
SORT operation_table BY vornr.
LOOP AT sequence_table INTO l_sequence.
    MOVE-CORRESPONDING l_sequence TO l_affl.
* Read the operation table to determine the vornr1 and vornr2
*via the value of field BKNT1/2
    IF NOT l_sequence-bknt1 IS INITIAL.
      READ TABLE operation_table INTO l_operation
      WITH KEY aufpl = l_sequence-aufpl
               aplzl = l_sequence-bknt1.
      IF sy-subrc = 0.
        l_affl-vornr1 = l_operation-vornr.
      ENDIF.
    ENDIF.
    IF NOT l_sequence-bknt2 IS INITIAL.
      READ TABLE operation_table INTO l_operation
      WITH KEY aufpl = l_sequence-aufpl
               aplzl = l_sequence-bknt2.
      IF sy-subrc = 0.
        l_affl-vornr2 = l_operation-vornr.
      ENDIF.
    ENDIF.
Cheers,
S.

I never got my UPS return label for my old equipment

I never got my UPS return label for my old equipment

emchaviano wrote:
I never got my UPS return label for my old equipment
Apologies. We can get you a UPS Return label if you need one.
Otherwise, you can return the equipment at one of the local service centers listed below or any UPS Store location (no label required).
Some options listed below:
Comcast
18055 SW Franjo Rd
Palmetto Bay, FL 33157
MONDAY-FRIDAY: 8:00am-5:00pm
SATURDAY: 10:00am-2:00pm
SUNDAY: Closed
Comcast
7404 SW 117th Avenue
Miami, FL 33183
MONDAY-SATURDAY: 8:00am-7:00pm
SUNDAY: Closed
The UPS Store
14629 SW 104 STREET
MIAMI, FL 33186-2905
Phone: (305)408-7430
Mon - Fri 08:30-07:00, Sat 09:00-04:00
The UPS Store
12973 SW 112TH ST
MIAMI, FL 33186-4768
Phone: (305)382-5220
Mon - Fri 08:30-07:00, Sat 09:00-04:00
The UPS Store
8306 MILLS DR
MIAMI, FL 33183-4838
Phone: (305)595-8577
Mon - Fri 09:00-07:30, Sat 09:30-05:00
The UPS Store
18495 S DIXIE HWY
MIAMI, FL 33157-6817
Phone: (305)238-2242
Tue - Fri 08:30-07:00, Sat 10:00-03:00
More info here: http://customer.xfinity.com/help-and-support/cable-tv/returning-your-equipment/

Advertise implicit-null label for static routes

Hi, I want to ask if there is any way to change the label or stop adveritise label for an static route. Normally LDP advertises an Implicit Null label for directly connected routes. We want to do similar thing for static routes.
We need to do this is because somehow we need to do rate-limit on the PE interface connecting to the core network instead of the interface connecting to CE. As the incoming packets still got labelled, the rate-limit is skipped. So we want to stop the PE creates label for the static routes or advertises them with implicit null label. Thanks in advance.

Calvin,
Bear in mind that if you only enter the "no mpls ldp advertise-label" command, LDP will stop propagating all labels, which might not ba what you want. If you selectively want to propagate certain labels, then you need to also use "mpls advertise label for " as Shivlu suggested.
Regards,

In flex charts the label for next month get dropped

I found for DatatTimeAxis if you set disabledRanges to the last date of the month the label for next month gets dropped using property labelUnits='months". Any ideas? Below is the code:
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
     <mx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
               [Bindable]
               public var stockDataAC:ArrayCollection=new ArrayCollection([{date: "2005, 6, 1",
                         close: 30}, {date: "2005, 7, 31", close: 25}, {date: "2005, 8, 3",
                         close: 40}, {date: "2005, 9, 4", close: 30}, {date: "2005, 10, 5",
                         close: 50}, {date: "2005, 11, 6", close: 43}]);
               private var d:Date=new Date("7/31/2005");
               [Bindable]
               private var offDays:Array=[d];
               public function myParseFunction(s:String):Date
                    // Get an array of Strings from the comma-separated String passed in.
                    var a:Array=s.split(",");
                    // Create the new Date object. Subtract one from
                    // the month property because months are zero-based in
                    // the Date constructor.
                    var newDate:Date=new Date(a[0], a[1] - 1, a[2]);
                    return newDate;
          ]]>
     </mx:Script>
     <mx:Panel title="DateTimeAxis Example"
                 height="100%"
                 width="100%">
          <mx:LineChart id="mychart"
                           height="100%"
                           width="100%"
                           paddingRight="5"
                           paddingLeft="5"
                           showDataTips="true"
                           dataProvider="{stockDataAC}">
               <mx:horizontalAxis>
                    <mx:DateTimeAxis dataUnits="days"
                                         parseFunction="myParseFunction"
                                         disabledRanges="{offDays}"
                                         labelUnits="months"/>
               </mx:horizontalAxis>
               <mx:verticalAxis>
                    <mx:LinearAxis baseAtZero="false"/>
               </mx:verticalAxis>
               <mx:series>
                    <mx:LineSeries yField="close"
                                      xField="date"
                                      displayName="AAPL"/>
               </mx:series>
          </mx:LineChart>
     </mx:Panel>
</mx:Application>

I found your posted code to be messed up. I fixed it and could not see your problem.
Here is the fixed code.
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
     <mx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
               [Bindable]
               public var stockDataAC:ArrayCollection=new ArrayCollection([
                 {date: "2005, 6, 1", close: 30},
                 {date: "2005, 7, 31", close: 25},
                 {date: "2005, 8, 3", close: 40},
                 {date: "2005, 9, 4", close: 30},
                 {date: "2005, 10, 5", close: 50},
                 {date: "2005, 11, 6", close: 43}]);
               private var d:Date=new Date(2005,8,31);
               [Bindable]
               private var offDays:Array=[d];
               public function myParseFunction(s:String):Date
                    // Get an array of Strings from the comma-separated String passed in.
                    var a:Array=s.split(",");
                    // Create the new Date object. Subtract one from
                    // the month property because months are zero-based in
                    // the Date constructor.
                    var newDate:Date=new Date(a[0], a[1] - 1, a[2]);
                    return newDate;
          ]]>
     </mx:Script>
     <mx:Panel title="DateTimeAxis Example"
                 height="100%"
                 width="100%">
          <mx:LineChart id="mychart"
                           height="100%"
                           width="100%"
                           paddingRight="5"
                           paddingLeft="5"
                           showDataTips="true"
                           dataProvider="{stockDataAC}">
               <mx:horizontalAxis>
                    <mx:DateTimeAxis dataUnits="days"
                                         parseFunction="myParseFunction"
                                         disabledRanges="{offDays}"
                                         labelUnits="months"/>
               </mx:horizontalAxis>
               <mx:verticalAxis>
                    <mx:LinearAxis baseAtZero="false"/>
               </mx:verticalAxis>
               <mx:series>
                    <mx:LineSeries yField="close"
                                      xField="date"
                                      displayName="AAPL"/>
               </mx:series>
          </mx:LineChart>
     </mx:Panel>
</mx:Application>
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

ESB: Is it possible to create custom WSDL for routing service?

Hello all!
I have an unchangeable requirement in my project - ESB routing services must confom to WSDL specifications that are already used before we started this integration project.
For example, we have to implement not only the same logical part of WSDL description:
<message name="AuthorisationRequestSoapIn">
<part name="AuthorisationRequest" element="tns:AuthorisationRequest"/>
</message>
<message name="AuthorisationRequestResponseSoapOut">
<part name="AuthorisationRequestResponse" element="tns:AuthorisationRequestResponse"/>
</message>
<portType name="OnlineServicesSoap">
<operation name="AuthorisationRequest">
<input message="tns:AuthorisationRequestSoapIn"/>
<output message="tns:AuthorisationRequestResponseSoapOut"/>
</operation>
</portType>
but the binding and service sections must conform to WSDL document too:
<binding name="OnlineServicesSoapBinding" type="tns:OnlineServicesSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="AuthorisationRequest">
<soap:operation style="document" soapAction="AuthorisationRequest"/>
<input>
<soap:body use="literal" namespace="http://..../OnlineServices"/>
</input>
<output>
<soap:body use="literal" namespace="http://..../OnlineServices"/>
</output>
</operation>
</binding>
<service name="OnlineServicesSoapService">
<port name="OnlineServicesSoapPort" binding="tns:OnlineServicesSoapBinding">
<soap:address location="....."/>
</port>
</service>
And after registration of ESB routing service I've got the following service description (I ommit esb bindings and logical part here, it's ok with messages and portTypes):
<binding name="__soap_OnlineServicesSoapService_OnlineServicesSoap" type="import:OnlineServicesSoap">
<soap:binding xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="AuthorisationRequest">
<soap:operation xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" style="document" soapAction="AuthorisationRequest"/>
<input>
<soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
</input>
<output>
<soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
</output>
</operation>
</binding>
<service name="ESB_OnlineServicesSoapService_Service">
<port name="__soap_OnlineServicesSoapService_OnlineServicesSoap" binding="tns:__soap_OnlineServicesSoapService_OnlineServicesSoap">
<soap:address xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" location="http://..../event/DefaultSystem/OnlineServicesSoapService"/>
</port>
</service>
How can I change WSDL that is generated for routing services? Is it possible to change the names of port and binding element?
Thanks in advance,
Oleg Olenin

So, no docs, no answers, no life :) - I have only one way to get the answers:
oracle.tip.esb.configuration.util.WSDLGenerator.addSOAPBindings():
binding.setQName(new QName(targetNamespace, WSDLConstants.generateSOAPPortName(service.getName(),portType.getQName().getLocalPart())));
oracle.tip.esb.configuration.util.WSDLConstants:
public static final String generateSOAPPortName(String service, String operation)
return "__soap_" + service + "_" + operation;
So it is not possible to change the names of SOAP binding and port.
And I guess there is no way to change WSDL that is generated for routing services.

Prepaid shipping label for edge program

I used my edge program to get the new iphone. However, there was no prepaid shipping label in the box to send my old phone in. Any one else have this issue? Am I supposed to get it from somewhere else?

et1234,
Not at all! Happy to help with your questions. When you click on the above link you will need to sign into your My Verizon account. Once signed it you can click on the order you need the label for and there will be a Print Return Label option. You can always have the store assist you in printing a label as well. Let us know if you need any further assistance!
TrevorC_VZW
Follow us on Twitter @VZWSupport

How do I create 4" X 2" labels for student folders?

How does one create 4" X 2" labels for student folders using adobe pro?

You need to make such labels in a word processor. WORD has several templates for creating labels (often obtained from the label maker). These typically put several labels on a page, but depend on the labels used. I don't really recommend using Acrobat (Adobe is the company name) unless it is possible that the label manufacturer has provided a PDF template to use for the process.
Hopefully I have not misunderstood your request, but Acrobat does not seem to be the proper route. If you have information on the labels you are using, maybe we could give better information, but we would simply be getting such info from the label web site.

Can I show a data label for only one point in a series?

Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
There are a number of graphs where I only want to value of either an extreme value or the ending value to show. Having all the labels in a series makes the chart too busy. This is pretty easy to do in Excel.
If this can't be done, I guess that adding a text box over those points would work.
Thanks

Hi W-T,
Welcome to Apple Discussions and the Numbers '09 forum.
wahoo_tiger wrote:
Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
Sure. Here's and example labeling only the MIN and MAX points.
Column B contains the data charted with the blue line.
Column C extracts the MIN and MAX values using the formula below. Those two values are charted as a separate series, using the green data point markers, and are labeled with their values. The intervening empty string values appear to have doused the lines connecting the two data points.
Formula: =IF(OR(B=MAX(B),B=MIN(B)),B,"")
Regards,
Barry

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

When printing labels for each printed label a blank label comes out of the printer

Hello Experts
We have a CR report which is designed to prints labels for the items using a label printer. After an upgrade that we have last month the settings for this report are missing so the labels were coming out wrong.
Due to this I have had to reconfigure this report and its printing preferences and so far I have managed to make the prints fit in each label. But the problem is that if I try to print 5 copies of a label, the 5 labels come out of the printer just fine, butt after it another 5 blank labels come out of the printer too.
I have tried with all parameters in "Printing preferences", mainly in the "Material" tab but nothing works.
Thanks in advance and regards

Hi,
Please check below SAP note and let me know your feedback:
1043235 - Label/thermal printers are not supported by SAP Business
One
Thanks & Regards,
Nagarajan

Different labels for a textview based on component usage

Hi,
We are on SAP E-Recruiting EHP5 and we have a requirement wherein the label of a textview in a view needs to be dynamicaly controlled. The candidates personal data page (view VW_PERSONALDATA of component HRRCF_C_PERSONL_DATA_UI) gets displayed both:
1) When the candidate is signing up on the portal to create his profile
2) On the application page while the candidate is applying against a particular position
Now case 1 is a straightforward one. I set the label to a OTR and it just works fine. Case 2 is where the problem occurs. When the candidate applies against a particular position the standard SAP roadmap comes up with the view VW_PERSONALDATA of component HRRCF_C_PERSONL_DATA_UI as its 1st step. So now how can I set a different label for the textview in this particular case coz the navigation happens dynamically through prepare_dynamic_navigation( ). Appreciate your inputs on this one.
Regards,
Uday
Edited by: Uday Mr on Feb 29, 2012 3:36 PM

Hi Uday,
Please try to create it dynamically.
Example:
METHOD wddomodifyview.
*-Data declaration
DATA: root TYPE REF TO cl_wd_uielement_container,
page_header TYPE REF TO cl_wd_page_header.
*-Get reference to Root UI Element Container
root ?= view->get_element('ROOTUIELEMENTCONTAINER').
*-Creating page header
page_header = cl_wd_page_header=>new_page_header( title = 'Page Header' ).
cl_wd_flow_data=>new_flow_data( element = page_header ).
*-Add new page header to ROOT Element Container
root->add_child( page_header ).
ENDMETHOD.

Since downloading the most current iTunes software I can no longer print the insert (label) for a jewel case. The songs are printed over each other and can not be read. Any suggestions? Thanks.

Since downloading the most current iTunes software I am no longer able to print an insert (label) for a jewel case. I click on print, choose jewel case and then it doesn't matter which option I choose for the insert it will only print the songs over each other in a 1 inch section so that it can not be used or read. If instead of clicking on the jewel case I click on list it works fine and prints an appropriate list. I have always updated the iTunes software the first time I am offered to do so and I have never had a problem printing the jewel case inserts. Since this issue is not about a piece of hardware iTunes help will not help me.

Did you ever get a response?
If you so how did you correct the problem?
I have the exact problem you had.
Please let me know.
Thank you
<Edited by Host>

Dynamically Changing Labels for Multi Row Block Buttons

Forms [32 Bit] Version 9.0.4.1.0 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
On my local: Windows 7 OS
I am having a difficult time in doing the following in forms, and not sure if it can be done?
I have a multi row block,based on DB table, which displays filename and another column from the table.
It also has a push button on each row, which opens and displays the physical file from its source, when clicked. The filename thus can have 3 diff statuses depending on its sources and accordingly corresponding button should display appropriate label:
a) View Image (its is in content server and successfully imaged. In this case I display the file in the browser, from the content server, when the button is clicked)
b) View File (Display the file from file system)
c) View Error (Display imaging error message from the table, as file failed to make it to the imaging server)
I have this logic currently coded in the post query trigger, at the block level, and tried using set_item_property(button_id, label, <button_lable>), where I programmatically set the button lable, based on the file status (imaged, not imaged or has error) in that row. This wroks well, only if all the files in the multi row block have the same status. If each of them have diff statuses, then only last processed files's status gets reflected into the button label. For eg: The file in the first row of the block is imaged, and one in the second row has an imaging error. The button label for the first row should say 'View Image' and button for the second row should say 'View Error'. But now buttons for both the rows display 'View Error', as thats what got processed last!
I __can not use set_item_instance property for 'label'__ (which lets us dynamically change the label on the push buttons).
Is there any way to do this for ORacle forms? I am now playing with having 3 diff button items in that block, laying them on top of each other and showing only those that are appropriate and hiding the others... But I am not sure it is going to give me what I need? I think I am going to end up facing the same issues as in above case!!
Any expert advice is highly appreciated.
Thanks in advance for your time:
Libran_Girl
Edited by: libran on Aug 30, 2011 8:04 AM
Edited by: libran on Aug 30, 2011 8:05 AM

<p>I have just updated this existing PJC, that was originally constructed to handle Text Fields. You can, now, also handle buttons with it.
Set the Button's Implementation Class property to : oracle.forms.fd.MultiButton.
</p>
This is the code you have to put one triggers of your based block:
When-New-Record-Instance trigger: (based on the EMP table)
declare
     LN$Pos pls_integer ;
     LN$Rec pls_integer := Get_Block_Property('EMP', CURRENT_RECORD) ;
     LN$Max pls_integer := Get_Block_Property('EMP', RECORDS_DISPLAYED) ;
     LC$C    Varchar2(15) ;
Begin
     LN$Pos := LN$Rec - (trunc(LN$Rec/LN$Max) * LN$Max) ;
     If LN$Pos = 0 Then LN$Pos := LN$Max ; End if ;
     If LN$Pos > 0 Then
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_LOG', 'true' );
          -- Add the new item --
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_NEW_REC', to_char(LN$Rec) );
          -- Set some properties --
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_LABEL', to_char(LN$Rec) || ',' || :EMP.ENAME );
          If :EMP.JOB = 'MANAGER' Then
            Set_Custom_Property('EMP.BT', LN$Pos, 'SET_FONT', to_char(LN$Rec) || ',Arial,bold,14' );
            Set_Custom_Property('EMP.BT', LN$Pos, 'SET_FGCOLOR', to_char(LN$Rec) || ',0,0,255' );
          End if ;
          If :GLOBAL.I > 250 Then :GLOBAL.I := 5 ;
          Else :GLOBAL.I := :GLOBAL.I + 5 ;
          End if ;
          LC$C := To_Char(LN$Rec) || ','
               || To_Char(255) || ','
               || To_Char(255-:GLOBAL.I) || ','
               || To_Char(255-:GLOBAL.I) ;
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_BGCOLOR', LC$C );
          Synchronize;
     End if ;
end;When-Create-Record trigger:
declare
     LN$N    pls_integer ;
     LN$Rec pls_integer := :system.cursor_record ;
     LC$C    Varchar2(15) ;
Begin
     if get_block_property('EMP',TOP_RECORD) > 1 Then
          LN$n := :system.cursor_record - get_block_property('EMP',TOP_RECORD) + 1 ;
     else
          LN$N := :system.cursor_record ;
     end if;
     If LN$N > 0 Then
          Set_Custom_Property('EMP.BT', LN$n, 'SET_LOG', 'true' );
          -- Add the new item --
          Set_Custom_Property('EMP.BT', LN$n, 'SET_NEW_REC', to_char(LN$Rec) );
     End if ;
end;Post-Query trigger:
declare
     LN$Pos pls_integer ;
     LN$Rec pls_integer := Get_Block_Property('EMP', CURRENT_RECORD) ;
     LN$Max pls_integer := Get_Block_Property('EMP', RECORDS_DISPLAYED) ;
     LC$C    Varchar2(15) ;
Begin
     LN$Pos := LN$Rec - (trunc(LN$Rec/LN$Max) * LN$Max) ;
     If LN$Pos = 0 Then LN$Pos := LN$Max ; End if ;
     If LN$Pos > 0 Then
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_LOG', 'true' );
          -- Add the new item --
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_NEW_REC', to_char(LN$Rec) );
          -- Set some properties --
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_LABEL', to_char(LN$Rec) || ',' || :EMP.ENAME );
          If :EMP.JOB = 'MANAGER' Then
            Set_Custom_Property('EMP.BT', LN$Pos, 'SET_FONT', to_char(LN$Rec) || ',Arial,bold,14' );
            Set_Custom_Property('EMP.BT', LN$Pos, 'SET_FGCOLOR', to_char(LN$Rec) || ',0,0,255' );
          End if ;
          If :GLOBAL.I > 250 Then :GLOBAL.I := 5 ;
          Else :GLOBAL.I := :GLOBAL.I + 5 ;
          End if ;
          LC$C := To_Char(LN$Rec) || ','
               || To_Char(255) || ','
               || To_Char(255-:GLOBAL.I) || ','
               || To_Char(255-:GLOBAL.I) ;
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_BGCOLOR', LC$C );
          Synchronize;
     End if ;
end;Don't forget to copy the multirecord.jar file in your /forms/java folder, then add it to the archive and archive_jini tags of your /forms/server/formsweb.cfg file.
Enjoy it,
Francois

"Date picker" in report - - View source shows no label for the date picker

Hi
In one of my reports, I am using multiple types (textarea/text/date picker/select list)
I wanted to use a javascript based on the label, but I do not see "<label>" for Date picker in the view source due to which my Javascript fails.
Snippet of view Source:
<td class="t3data" ><label for="f08_0001" class="hideMe508">CATEGORY</label><textarea name="f08" rows="4" cols="16" wrap="VIRTUAL" id="f08_0001">EMPLOYEE INDUCTION</textarea></td>
<td class="t3data" ><span class="lov"><input type="text" name="f11" size="15" maxlength="2000" value="29-FEB-08" style="padding-right:5px;" id="f11_0001" /><script type="text/javascript">
As you can see above, we have a "label for" for the text area but not for the date picker
Is there a reason for the same?
Thanks
Nitin

Hi,
OK - the headers attribute should also help as these will identify the correct cells. You would need to know the html tags used within each cell for each datatype.
Would using cloneNode help you? It's a method of creating a copy of an entire row in a single instruction
Andy

No Return Label for Router return

Similar Messages

Maybe you are looking for