Using Two JTextPanes to create an editor..help

Hi
I am writing a language editor ( english to native language). The editor would use the tranliteration. I need to make this both an application and an applet(for obvious reasons). Any suggestions on what container should be used? I am planning to use two text panes on a Frame? It this the right approach? The editor would have the standard features an editor has.Any examples to look at?
Thanks
kris

James
Thanks for responding
I need some direction here, the following is what i am trying to accomplish
have something like this
------------------------------------------------THIS IS FRAME----------
---------JTextPane1---------------------------------
| |
| |
| |
| |
| |
----------JTextPane2--------------------------------
| |
| |
| |
| |
| |
I will use the below box for entry in to english and above box for transliterated text, how do I get the text from box below to the box above(plain english would be ok right now). And WHY do I need a box?
Any code on how to do it is appreciated

Similar Messages

Adjust Counter Delay on the fly using two Counters

Hi,
I'm using the technique described here by JohnP to implement an on the fly delayed output of a hardware counter relative to it's trigger.
http://forums.ni.com/t5/Multifunction-DAQ/Synching-AO-and-Counter-Output-arming-and-triggering-seque...
My system generates a hardware buffered regenerative analog output. A continuous synch pulse is generated using Cntr0 on the same PCI-6221 and is triggered off of the AO.StartTrigger in order to synchronize the Cntr0 Pulse with each generation of the AO wavefrom. Then Cntr1 is configured in retriggerable single sample high/low time mode and triggered off of the Cntr0.InternalOuput. By changing the low time of Cntr1 I can effectively implement an adjustable on the fly delay on the ouput of Cntr1 relative to Cntr0 and hence relative to the AO waveform.
The technique works great for rational values of drive period, (i.e. 1.258 s), but when an irrational waveform period is commanded such as (0.59405940594059405940594059405941 s) the Cntr1 delayed pulse drifts relative to Cntr0. Meaning if you start with a 0 second delay between the two counters, the output pulses are initially aligned but then Cntr1's output will rapidly drift such that the two counter outputs are no longer synchronized.
Clearly there is a rounding error occuring but I can't seem to correct it. I changed the Cntr1 high/low mode from time in seconds to clock ticks thinking I'd have better resolution but still see the same drift with irrational drive periods. I also suspect that by calling the Cntr1 property Cntr.RdyForNewVal in a loop the hardware determinism of my system is compromised.
Our current solution is to simply coherce the user commanded AO drive period to rational values.
I'm mainly wondering if this problem can be corrected or if it's just a limitation of the method using two counters to create an on the fly counter output delay.
Thanks,
Steve

John,
I'm measuring the drift of the output signals (AO and Cntr1) on a daq board scanning at 5000 scans/s.
The information you provided is helpful, I wasn't aware of the divide-down on the internal timebases. Yes, I am specifying the frequency directly to Cntr0 so this may be coerced differently than the AO.
Where does one find these specifics on the board and various clocks?
I've attached some sample code that may be of help to future users of this technique. The sample code outputs a continuous regenerative buffered Analog Output waveform (board hardware timed). Cntr1 is then configured in Frequency mode and triggers off of the AO.StartTrigger in order to synch the two signals. Then Cntr1 is configured in High/Low mode and triggered off of the Cntr0.InternalOutput. By changing the Cntr1 low time, I'm able to get an on the fly delayed output of Cntr1 relative to Cntr0 and hence the AO.
If you have a daq board and you wire the AO and Cntr1 output signals into two analog input signals, you can see the drift when using irrational frequencies. The sample code I provided only performs the output, so to see the signals you can simply create a continuous acquisition task in Max at 5Khz.
Thanks for you time and support.
Attachments:
Delayed Counter Pulse.zip ‏137 KB

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

I am trying to use two very long (2.5 hour HD) clips in multicam but FCPX only places one clip right after the other and does not create multicam. Is there a limit on clip size for multicam?

I am trying to use two very long (2.5 hour HD clips) and a 2.5 hour audio clip in multicam. One clip and the audio will ceate a multiclip but two clips will not. FCPX simply adds the second clip on at the end of the first. There must be some sort oflimitation on clip length. Is that correct and if so what is it?

The Angle field is not shown in the Inspector's default Basic View. With the clip selected in the event viewer, select the Info tab in the inspector. Change the view of the inspector from the default Basic View to the General View to be able to see the Angle field.
I assume you want to use the audio to do the sync. If FCP X has trouble syncing the audio, you can set a marker at the same chronological point in each clip before creating the multiclip. Then set Angle Syncronization to First Marker on the Angle and keep Use audio for syncronization checked. Your marker only needs to be close to get FCP X started. It will then use the audio to get final sync.

How to create a f4 help using function module.

Hi,
 I want to create an f4 help with out using match code objects.How can i do it ? . Is there any function code for it ?.

Hi,
Please search on SCN before posting...
Refer FM F4IF_INT_TABLE_VALUE_REQUEST
Refer this demo code to get a S.help for BELNR based on user input for BUKRS:-
PARAMETERS : p_belnr TYPE belnr,
 p_bukrs TYPE bukrs.
DATA : BEGIN OF itab OCCURS 0,
 belnr TYPE belnr,
 END OF itab.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_belnr.
PERFORM f4_belnr_help USING p_belnr.
*& Form f4_belnr_help
* text
* -->P_BELNR text
FORM f4_belnr_help USING p_belnr.
DATA : itab TYPE STANDARD TABLE OF it WITH HEADER LINE,
 tb_dynpfields LIKE dynpread OCCURS 0 WITH HEADER LINE,
 v_bukrs TYPE bukrs.
CLEAR: tb_dynpfields.
REFRESH: tb_dynpfields.
MOVE 'P_BUKRS' TO tb_dynpfields-fieldname.
APPEND tb_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = 'Z_F4' "program name
 dynumb = '1000' "screen number
 TABLES
 dynpfields = tb_dynpfields
 EXCEPTIONS
 INVALID_ABAPWORKAREA = 1
 INVALID_DYNPROFIELD = 2
 INVALID_DYNPRONAME = 3
 INVALID_DYNPRONUMMER = 4
 INVALID_REQUEST = 5
 NO_FIELDDESCRIPTION = 6
 INVALID_PARAMETER = 7
 UNDEFIND_ERROR = 8
 DOUBLE_CONVERSION = 9
 STEPL_NOT_FOUND = 10
 OTHERS = 11.
IF sy-subrc 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE tb_dynpfields INDEX 1.
IF sy-subrc EQ 0.
 v_bukrs = tb_dynpfields-fieldvalue.
ENDIF.
SELECT belnr from <db_table> INTO TABLE itab WHERE bukrs = v_bukrs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'BELNR' "internal table field
 dynpprog = 'Z_F4' "program name
 dynpnr = '1000' "screen number
 dynprofield = 'P_BELNR' "screen field name
 value_org = 'S'
 TABLES
 value_tab = itab "internal table
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3.
IF sy-subrc 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " f4_belnr_help
Hope this helps you.
Regards,
Tarun
Edited by: Tarun Gambhir on Mar 26, 2009 11:29 AM

How to create a unique key using two or more attributes?

how to create a unique key using two or more attributes ?

The following example illustrate how to create a unique key using two or more attributes/fields
Scenario: Implementing Unique Key on ManagerID & Location ID in DepartmentEO(Department Table)
Step#1: Open the Desired Entity Object “DepartmentEO”. Go to Overview tab & Click “General” Finger tab.
Step#2: Expand “Alternate Keys” section & click “+”.
Step#3: In the Pop-up wizard, Enter a name for alternate Key “Unique_Manager_X_Location”.
Step#4: Select the desired attributes/fields from available list & Shuffle to right side.
Step#5: Now go to “Business Rules” finger tab.
Step#6: Select “Entity Validators” in the list & click “+” to add a new entity level validation rule.
Step#7: In the Pop-up, Select “Rule Type” as Unique Key
Step#8: In the “Rule Definition” tab select the key “Unique_Manager_X_Location”created.
Step#9: Now go to “Failure Handling” tab, and click the Magnifier Icon .
Step#10: If the key is not already created then in the “Select Text Resource” Popup, Using the functional design document, Enter display value, Key and Description. And click “Save & Select” Button.
Step#11: Now Click “OK”.

How to create multiprovider in BI 7.0 using two cubes

Hi all,
how to create multiprovider in BI 7.0 using two cubes?

Go to the infoarea you want and right click and click create a Multiprovider.
In the deifiniton of MP, choos ethe two infocubes you want to add and continue.
Choose the dimensions you want to include in your MP.
Add the characteristics you want to include in the dimensions.
Add key figures.
Then identify which cube the characateristics and keyfigures should come from and activate.
search the forums also.

Problem while creating table maintenance generator using two step

Hello All,
I have created a Z table in which I have 7 fields, out of which 6 are character fields and 7th field is of type INT4
Now when I create the maintenance generator using TWO STEP approach, the 7th field i.e., of type INT4 is not available in the first screen (the table control screen). This screen only has 6 fields for display.
But when I click NEW ENTRIES button, I get the next screen which has all the 7 fields.
But if I create the maintenance generator using SINGLE STEP, all 7 fields are displayed in the first screen.
Please suggest. Let me know if you require some more explaination.
Thanks & Regards,
Tarun

Hi Tarun,
Go to the layout and increase the size of the Screen. or at the screen attributes change the length and width values.
You know that initially the screen occupies default size only.
Hope this would serve your purpose.
Cheerz
Ram

I switched to Apple Mail in the last two months. When I attempt to print an email message, I get a blank piece of paper. When I attempt to use the print options suggested in "Mail Help", the program crashes and has to be reopened. Any ideas?

I switched to Apple Mail in the last two months. When I attempt to print an email message, I get a blank piece of paper. When I attempt to use the print options suggested in "Mail Help", the program crashes and has to be reopened. Any ideas?

Which version of Mail are you using as well as which Snow Leopard version you are using?

Help with using two computers for iPod

So, as the title hints to, I use two different computers for my day to day activities and have now run into a big hiccup.
-I have, currently on my iPod about 475 songs. All were painstakingly loaded from their CD's onto the little devil. I did this at work in spare time (OK maybe not, but that's not wehat we're here about)
-Today I tried connecting to load some new songs, from my home machine, onto the iPod and it says it will erase all of my previous work.
-I did some browsing here and discovered things like Pod Soft or whatever but could none of those programs to work for me. I also attempted the shift/ctrl trick which failed as well.
-Am I hooped? Do I just face facts and use only one machine for this? What happens when I trade a computer? Actually, in the meantime I am not worried about that, I just want my new tunes on the iPod. I am feeling quite limited by this and understood it would be a much easier process.
Thanks for looking in on this and any advice given.

This might also be of interest:
Managing Songs Manually
I hope this helps!

Hi, I use two email addresses within one account with gmx. I created one account with the first email address now. How do I add the second one to this account? Now it looks like this. One account was opened with address A. I receive in this account email

Hi, I use two email addresses within one account with gmx.
I created one account with the first email address now. How do I add the second one to this account?
Now it looks like this.
One account was opened with address A.
I receive in this account emails for address A and B.
But I can only write and answer with address A.

Hi Rudegar,
Sorry for my late reply.
It s not the amount of accounts I'm struggling with.
When I create now for both email addresses one account, then I receive the same emails two times.
That is not what I want.
Because on gmx the two email addresses have the same inbox and outbox.
E.g. I can login to my gmx account either with email A or B. It doesn't matter.
Now I want to have the same on my ipad.
One account with both email addresses.

Using dvd studio pro and getting language must differ message. Will not let me create disc. Help!

using dvd studio pro and getting language must differ message. Will not let me create disc. Help!

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

My track pad stopped working with a single finger/double click when I try to open emails, and when I try to open apps on desk top. If I use two fingers, and then click open, I can open them. Thank You for your help.

My track pad stopped working with a single finger/double click when I try to open emails, and when I try to open apps on desk top. If I use two fingers, and then click open, I can open them. Thank You for your help.

Greetings ascnephew8,
It seems your trackpad isn't working as you expect it to. Have you reviewed the trackpad settings in System Preferences? The following article provides trackpad setting details which may help:
OS X Mountain Lion: Change the way your trackpad works
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

Music and Video on Nas in folders but how do i set up itunes on multiple computers to see and use these files and create libraries?

Music and Video on Nas in folders but how do i set up itunes on multiple computers to see and use these files and create libraries?
So i have had a itunes set up on my old PC, bought a NAS and copied the folders over to the NAS, i did this incorrectly and so then even when i told the old PC to use that folder it saw all the songs but wasnt able to play the songs as it was looking in the incorrect place.
So now i want my Mac as well as my PC and others to all use the music, videos etc on the NAS they are in itunes friendly folders (as they were compiled this way by the itunes on the old PC.
When i tell the mac to use the itunes library.itl file it sees the song list (about 100gb) but cant see any songs, so i have removed this file to another location for now with the hope to set up a new file and then get it to see the songs on the folder from the NAS.
Can someone tell me how to do this for all the Mac's and PC's on my network as i really want one master library that all use and add too.
Thanks for your help in advance.

I have the same question but I am using two pc's

Using Two JTextPanes to create an editor..help

Similar Messages

Maybe you are looking for