"NO_SCHEME" dump when change article using MM42
hi,all,
I met one NO_Scheme dump when using MM42 to change purchase/sales view of the article , however, I can change another similar article without any errors, anybody can check it out for me?
errors like below:
"A RAISE statement in the program "SAPLMEKO" raised the exception
condition "NO_SCHEME".Since the exception was not intercepted by a superior
program, processing was terminated."
many thanks
The problem is fixed by myself.
Check from the system source code, it seems the condition problem, so I switch to check the purchase & sales price condition type, fortunately, I found some purchase organization missing the Calculation Schema.( I found the problem in IDES system, and the system setup by some scripts,maybe some configuration is missing during the automatic setup)
DONE.
anyway, thanks for your all review this question.
Regards
Along
Similar Messages
-
Dump when changing the value for a field (of 13 decimals) in alv grid.
Hi Group,
Its giving a dump when user is trying to change the value.
dump description: Unable to interpret "70,000 " as a number.
what is happening here is, the original value is 50,000 and he is deleting 5 and replacing it with 7, here its throwing the dump.
If he removes the complete number 50,000 and then gives 70000 its taking the value.
I tried to use, the decimals options in alv field catalog but to no joy.
Please can you give me an advice on this.
Many Thanks.the problem is the comma in the 70,000....that's an alpha character.... Normally, we expect SAP to display numeric fields in a appropriate format, based upon their numeric type, but trying to forcibly insert '70,000' into a true numeric-type field can generate an 'unable to interpret xxx,xxxx as number' error.
You could experiment with changing your ALV column to a char17 (or appropriate width) and putting your numeric value into that to display, then converting back to type P, or other field type in the table, in a column that is not displayed, when the user changes the value.... essentially two columns, one not displayed with a routine to copy/convert the numeric field into the alpha field and the reverse when the field is changed.
But, the better solution is probably for the user to understand that they're seeing a formatted numeric field, and that they need to replace the entire value with the only possible punctuation being a decimal and (if necessary) a negative sign. -
In 4.5b system, program temporarily buffered; short dump when changing
Hi,
I have a program needs to be activated in 4.5B system.. when I clicked on Change button it is displaying options: -
a) get temporary version
b) get from database and keep temporary
c) get from database and delete temporary
I tried all the 3 options... and try to change the program and activate it.. It is going to short dump.
Could someone tell what needs to be done..to activate the program and delete the temporary version.
Regards,
HKHi,
Thats the real problem . Try this way which i used previously. dont know how effective in 4.5B
1) In the SE38 screen, give the program name. in the menu list,
Utilities ->Versions->Versions Management
2) Try compare the latest with last version. Note down if there are any changes. If not much, you can select the previous version and press Retrieve button ( or CTRL + F5 )
Then try enter the program again. It will be in previous version. then you can activate it
If still this is not working, the practical way is to copy the program, save in local system. Delete the program and create a new one
//Kothand -
Ldap_search_ext_s() produces CORE dump when ATTRS is used
Hello,
we are using DS5.2 on Solaris 10 platform.
Core dump are produced by the 'C' funcion ldap_search_ext_s() when we are looking for operational attrs.
There is a BUG listed in SUNSOLVE ( Document ID: 4768676 ) but there are not suggested solutions/workarounds.
May anyone help me ?
Thanks,
silvioOops I'm sorry to say I've already worked out what I was doing wrong! I
had a limit of 1 search result being returned by the function.
Previously when I was just looking for users by
objectClass=inetOrgPerson that was sufficient, but with aliases included
as well it was not.
Please disregard this thread.
mattross
mattross's Profile: http://forums.novell.com/member.php?userid=30003
View this thread: http://forums.novell.com/showthread.php?t=394151 -
Getting dump when using do_sum in alv field cat in the output of the report
Dear Freinds,
Iam getting the alv report when i click on the segma field (Sum) on my salary
field iam getting dump. and also if i try to print my alv output iam getting dump , only
happening to my custom report.
i have used the following code pleae correct me .
This perform is used for Layout settings
perform st_layout_build using gs_layout.
form st_layout_build using st_ls_layout type slis_layout_alv.
st_ls_layout-no_input = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra = 'X'.
st_ls_layout-detail_popup = 'X'.
endform. " st_layout_build
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'ORGUNIT'.
ls_fieldcat-seltext_l = 'Orgunit'.
ls_fieldcat-no_out = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 2.
ls_fieldcat-fieldname = 'ORGTEXT'.
ls_fieldcat-seltext_l = 'Orgdesc'.
ls_fieldcat-no_out = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname = 'SALARY'.
ls_fieldcat-seltext_l = 'Salary'.
ls_fieldcat-col_pos = 3.
ls_fieldcat-outputlen = 15.
ls_fieldcat-do_sum = 'X'.
ls_fieldcat-datatype = 'CURR'. "CURR
append ls_fieldcat to fp_i_fieldcat.
endform.
Variant
perform st_variant_init using gs_variant g_repid.
form st_variant_init using st_gs_variant type disvariant
st_repid like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform. " st_variant_init
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
form st_comment_build using st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform. " st_comment_build
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = 'X'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_callback_program = g_repid
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
i_structure_name = 'i_final' "c_i_final "'objec'
i_save = g_save
is_variant = gs_variant
tables
t_outtab = fp_i_pyrol_final
exceptions
program_error = 1
others = 2.
if sy-subrc ne 0.
message e018. " Displaying the ALV GRID has failed
endif.
Please could any one let me know why iam getting dump when iam clicking for total
on my salary field.
Regards
lathaDear Chandu,
my code iam giving in details
types : begin of ty_output_data,
staffno type pernr_d,
staffname type emnam,
grade type stell,
orgunit type orgeh,
orgtext type hr_mcstext,
psgroup type trfgr, " Pay Scale Group
salary type maxbt, "PAD_AMT7S,
rrefunded type pad_amt7s,
leavepay type pad_amt7s,
mshortfal type pad_amt7s, " Medical Shortfall
echkshfal type pad_amt7s, " Execute checkup shortfall
ofindeduc type pad_amt7s, " Other Finance Deduction
mtyprem type pad_amt7s, " maternity premium
vpbonus type pad_amt7s, " VP/Bonus
gratuity type pad_amt7s, " Gratuity
vpay type pad_amt7s, " Variable pay
mallowance type pad_amt7s, " Meal Allowance
overtime type pad_amt7s, " overtime
other type pad_amt7s, " OTHER
pfundeecon type pad_amt7s, " PFund Employee's Contribution
banktrnsfer type pad_amt7s, " Bank Transfer
count type i,
end of ty_output_data.
data : i_final type standard table of ty_output_data.
iam getting all my data in the internal table I_FINAL.
perform get_final_alv using i_final.
form get_final_alv using fp_i_pyrol_final type ty_t_output_data.
*local variable declarations
data : l_v_idx type sy-tabix.
*local work areas
data : l_wa_final type ty_output_data.
g_save = 'A'.
This perform is used for Layout settings
perform st_layout_build using gs_layout.
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
Variant
perform st_variant_init using gs_variant g_repid.
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
if not fp_i_pyrol_final is initial.
delete adjacent duplicates from fp_i_pyrol_final comparing all fields.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = 'X'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_callback_program = g_repid
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
i_structure_name = 'i_final' "c_i_final "'objec'
i_save = g_save
is_variant = gs_variant
tables
t_outtab = fp_i_pyrol_final
exceptions
program_error = 1
others = 2.
if sy-subrc ne 0.
message e018. " Displaying the ALV GRID has failed
endif.
endif.
endform. " get_final_alv
form st_layout_build using st_ls_layout type slis_layout_alv.
st_ls_layout-no_input = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra = 'X'.
st_ls_layout-detail_popup = 'X'.
endform. " st_layout_build
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'ORGUNIT'.
ls_fieldcat-seltext_l = 'Orgunit'.
ls_fieldcat-no_out = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 2.
ls_fieldcat-fieldname = 'ORGTEXT'.
ls_fieldcat-seltext_l = 'Orgdesc'.
ls_fieldcat-no_out = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 5.
ls_fieldcat-fieldname = 'STAFFNAME'.
ls_fieldcat-no_out = 'X'.
ls_fieldcat-seltext_l = 'StaffName'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 4.
ls_fieldcat-fieldname = 'STAFFNO'.
ls_fieldcat-no_out = 'X'.
ls_fieldcat-seltext_l = 'StaffNo.'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 6.
ls_fieldcat-fieldname = 'GRADE'.
ls_fieldcat-seltext_l = 'Grade'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 3.
ls_fieldcat-fieldname = 'COUNT'.
ls_fieldcat-seltext_l = 'Headcount'.
append ls_fieldcat to fp_i_fieldcat.
if the field name is 'Salary' then do a sum on this field.
IF fp_fname = c_betrg.
l_wa_fieldcat-do_sum = c_x.
ENDIF.
NOTE : IAM GETTING PROBLEM IN THE BELOW SALARY.
IAM JUST CHECKING ITSELF NOT ALLOWING ME TO EXECUTE
clear ls_fieldcat.
ls_fieldcat-fieldname = 'SALARY'.
ls_fieldcat-seltext_l = 'Salary'.
ls_fieldcat-col_pos = 7.
ls_fieldcat-outputlen = 20.
ls_fieldcat-do_sum = 'X'.
ls_fieldcat-datatype = 'CURR'. "CURR
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 9.
ls_fieldcat-fieldname = 'LEAVEPAY'.
ls_fieldcat-seltext_l = 'Leave Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 10.
ls_fieldcat-fieldname = 'MSHORTFAL'.
ls_fieldcat-seltext_l = 'Med.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 11.
ls_fieldcat-fieldname = 'ECHKSHFAL'.
ls_fieldcat-seltext_l = 'EX.Chckup.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 12.
ls_fieldcat-fieldname = 'OFINDEDUC'.
ls_fieldcat-seltext_l = 'Oth.Fin.Deduction'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 13.
ls_fieldcat-fieldname = 'MTYPREM'.
ls_fieldcat-seltext_l = 'Mat.Premium'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 14.
ls_fieldcat-fieldname = 'VPBONUS'.
ls_fieldcat-seltext_l = 'VP/Bonus'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 15.
ls_fieldcat-fieldname = 'GRATUITY'.
ls_fieldcat-seltext_l = 'Gratuity'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 16.
ls_fieldcat-fieldname = 'VPAY'.
ls_fieldcat-seltext_l = 'Variable Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 17.
ls_fieldcat-fieldname = 'MALLOWANCE'.
ls_fieldcat-seltext_l = 'Meal.Allowance'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 18.
ls_fieldcat-fieldname = 'OVERTIME'.
ls_fieldcat-seltext_l = 'Overtime'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 19.
ls_fieldcat-fieldname = 'OTHER'.
ls_fieldcat-seltext_l = 'Other'.
append ls_fieldcat to fp_i_fieldcat.
pfundeecon
clear ls_fieldcat.
ls_fieldcat-col_pos = 20.
ls_fieldcat-fieldname = 'P FUND EMPLOYEES CONTRIBUTION'.
ls_fieldcat-seltext_l = 'P.Fund.Emp.Contrib'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos = 21.
ls_fieldcat-fieldname = 'BANKTRNSFER'.
ls_fieldcat-seltext_l = 'Payment'.
append ls_fieldcat to fp_i_fieldcat.
endform. " st_fieldcat_init
form st_variant_init using st_gs_variant type disvariant
st_repid like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform. " st_variant_init
form st_comment_build using st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform. " st_comment_build
FORM TOP_OF_PAGE *
form top_of_page.
data: l_i_detailheader type slis_t_listheader.
To get the header for ALV
perform detail_header changing l_i_detailheader.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = l_i_detailheader.
endform. "top_of_page
form detail_header changing fp_i_detailheader type slis_t_listheader.
data: l_wa_header type slis_listheader,
l_v_time type slis_edit_mask,
l_v_date type slis_edit_mask,
l_v_abkrs type char5,
l_v_pabrj type char8,
l_v_pagno type char10.
Local Constants
constants: l_c_h type char1 value 'H',
l_c_1 type i value '1',
l_c_edit type char10 value '__.__.____',
l_c_slash type c value '/'. " constant for slash
To display the report Header
l_wa_header-typ = l_c_h.
WRITE sy-repid TO l_wa_header-info LEFT-JUSTIFIED.
write text-014 to l_wa_header-info left-justified.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To display the Page no
l_v_pagno = sy-pagno + l_c_1.
l_wa_header-typ = c_s.
l_wa_header-key = text-008. " Page No:
l_wa_header-info = l_v_pagno.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the User ID
l_wa_header-typ = c_s.
l_wa_header-key = text-009. " User ID
l_wa_header-info = sy-uname.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the Date/Time
l_wa_header-typ = c_s.
l_wa_header-key = text-010. " Date/Time:
l_v_time = sy-uzeit.
l_v_date = sy-datum.
write: sy-uzeit to l_v_time.
write sy-datum to l_v_date using edit mask l_c_edit.
concatenate l_v_date
l_c_slash
l_v_time into l_wa_header-info+0(25) separated by space.
append l_wa_header to fp_i_detailheader.
clear: l_wa_header, l_v_date.
To Display the Report Description
l_wa_header-typ = c_s.
l_wa_header-key = text-011. " Report Description
l_wa_header-info = text-012.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
append l_wa_header to fp_i_detailheader.
endform. " detail_header
I will be greatful if any one can please help me in removing me the dump.
REGARDS
LATHA. -
Hi,
I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?Hello there hastibahreini,
It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Dump when using REUSE_ALV_FIELDCATALOG_MERGE
Hello friends,
I am getting the following dump when using REUSE_ALV_FIELDCATALOG_MERGE.
The occupied line length in the program text must not exceed the width of the internal table.
The internal table "\FUNCTION=K_KKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" is 72
characters wide. The program line is 75 characters wide.
Regards,
K.SibiHello Ajay ,
THanks for the reply .
DATA : BEGIN OF it_data OCCURS 0,
matnr like RMMG1-MATNR , " Material number
mbrsh like RMMG1-MBRSH, " Industry sector
mtart like RMMG1-MTART, " Material type
meins like MARA-MEINS, " Base unit of measure
maktx like MAKT-MAKTX, " Material description
spras like makt-spras , " Language key
END OF it_data.
my fm
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = ge_repid
I_INTERNAL_TABNAME = 'it_data'
* I_STRUCTURE_NAME = 'it_data'
* I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = ge_repid
* I_BYPASSING_BUFFER = 'X'
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = alv_fieldcat
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
Regards,
K.Sibi
Edited by: sibi k kanagaraj on Apr 27, 2009 9:21 PM -
ABAP Dump when using Shift Related Confirmations in CO11N
Dear SAP Gurus,
We have activated business function LOG_PP_SRN_CONF for doing shift
related confirmations using T Code CO11N.
On entering the production order and operation number in CO11N, the
system proposes the actual data. Then we select the shift number.
If we try to change the selected shift again, the system gives an ABAP
dump - "OBJECTS_OBJREF_NOT_ASSIGNED" and exits the program.
Please suggest some SAP Note or other solution for the problem.
Thanks!
With Regards,
NitinDear Prasobh,
Thanks for the quick reply.
I have checked the OSS Note - 1359966 as mentioned by you.
However, there are 2 things which make me feel that the note is not relevant to my scenario -
1. The note says that the confirmation profile for CO11N includes the detail area "0240-Quantities: Subdivided Quantities". I'm not using this detail area in my confirmation profile. Instead, I'm using the detail area "0200-Quantities: yield/scrap/rework/reason".
2. System may issue termination message COCF 000 when single-screen entry for the confirmation (CO11N) is called by another application such as the order information system (COOIS). However, I'm getting this dump when i run the T Code CO11N directly. Further, I don't get the termination message at all.
Please suggest.
With Regards,
Nitin -
I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of. -
FP-module don't use new *.iak when changing to iak-file on runtime
Hi folks,
I'm using FP1001 (RS-485) communication modules with a bank of FP-AI-110
(8 x AI) and FP-SG-140 (8 x StrainGauge) with LabVIEW 6.1.
Since I need to change input ranges of the modules on runtime
(autoranging feature) and there is no vi to manage this, I created a
couple of iak-files with the FP-explorer (V3.02, build 177), where I set
the approbiate input ranges. My application then monitors the analog
input data of the modules and changes the used iak-file as needed to
prevent over- and underranging.
When changing the iak-file the current session is closed (FP-Close) and
the next session is opened with FP-Open and Create Tag, continuing with
FP-read.
My application does its' job well, since I monitor the currently used
iak-file, range and the fact that sessions get closed before opening the
next, but the FP-modules won't restart using the new range settings,
after the following session is started with the other iak-file. The
modules allways keep the previous settings.
So whats wrong?
Btw.
I noticed FP-Explorer also has its problems changing module- ranges,
after loading a new iak-file.
So I startup the FP-Explorer with a iak-file for a low range setting
(module input range) and increase the input voltage at the module input
just as much that a overrange occurs. Then I load another iak-file with
higher range-settings. FP-explorer shows the higher range in its range
column, but when monitoring the module input values, overrange is showed
first. After restarting monitoring, the input values are showed
correctly.
Heres' the problem:
Loading the previous iak-file again, the overrange should show again,
since the input value was left at the higher value, as set before. But
no overrange shows! FP-Explorer monitors the higher input value which
istn't within the input range, showed in the range column.
So FP-explorer hasn't switched down the modules range!!!
Restarting monitoring, or reloading the iak-file doesn't change
anything. Restarting the FP-explorer shows overrange again when starting
to monitor values. Restarting monitoring lets the FP-explorer continue
to monitor the higher input value, which is above the range showed in
the range column.
The only thing which helps all the time, is to open the devices context
menu, then to click on "Edit this device", and click on channel
configuration. Then a pop-up window asks which setting to use (file or
device). If I click on file, all the settings of the current used
iak-file are used correctly.
Ciao,
RainerRainer,
The FieldPoint IAK File is used in application programs (e.g. LabVIEW, LabWindows/CVI, OPC) for channel names, handle information and scaling information. FP Open.vi launches the FieldPoint Server with the specified IAK file, and uses the information in the specified IAK file for scaling (serial modules require scaling on the computer, ethernet modules scale the data in the network module) but does not re-configure the IO modules according to the IAK file. Likewise, opening an IAK file in FieldPoint Explorer does not reconfigure the IO modules to match the IAK file. The only times that settings are synchronized between the IAK and the modules are when a)the Find Devices command is issued (config from modules loaded), b) the Channel Configuration wi
ndow is opened (file or module config can be choosen) or c) a Snapshot command is issued (current settings of modules are stored).
Currently, the FieldPoint Server VI's do not allow dynamic re-configuration of ranges. If you wish to dynamically reconfigure your module ranges, you will need to use the FieldPoint Optomux VI's, which are located under the RT sub-palette of FieldPoint. They are installed by default only if you have LabVIEW RT, so you may need to re-install FieldPoint Explorer (custom install) to get them. For more information on the Optomux commands, please see the FP-1000/1001 Programmers Reference Manual.
Regards,
Aaron -
I am trying to set up app tabs, but when I am using one, if I go to a new site from there, the app tab changes to the new site instead of opening in a new tab, then the app tab changes to the new site. i.e. The app tabs don't stay constant. This occurs while still in Firefox, and does not relate to when I close it. Has anyone got any ideas? Thanks
If you backed up the iPhone to either iTunes or the iCloud, restore the backup. If not, the data is gone.
(126342) -
Unexpected error -10813 when trying to use Change All
I'm trying to change the Open With (in the Get Info window) program used with some files, but when trying to use the Change All button, I get :
The operation could not be completed
An unexpected error occured (error code -10813)
I'm trying to change all my .BMX files to open with the BlitzMax program, instead of the currently (incorrect) program.
Any reason why it should come up with this error message ?Not sure how helpful this is:
-10813 - kLSDataUnavailableErr - Data of the desired type is not available (for example, there is no kind string).
My guess is some sort of system corruption. You might try fixing the LaunchServices database:
Open the Terminal application in the Utilities folder. Paste the following command in its entirety at the Terminal window prompt and press return. Wait for the prompt to reappear.
/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/L aunchServices.framework/Versions/Current/Support/lsregister -kill -r -domain system -domain local -domain user
If the above doesn't resolve the problem then you might take a look at the information in this post for additional things you can try:
http://discussions.apple.com/message.jspa?messageID=1309414#1309414
I would also consider doing the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
Revision: 13299
Revision: 13299
Author: [email protected]
Date: 2010-01-05 19:07:45 -0800 (Tue, 05 Jan 2010)
Log Message:
fix the _rb swc so that it updates properly when changes happen - update="true" so that it will compile correctly when using locales
QE notes: ensure it contains a catalog.xml file, a swf, and a locale directory with properties file
Doc notes:
Bugs: https://bugs.adobe.com/jira/browse/SDK-24802
Reviewer: pete
Tests run:
Is noteworthy for integration: no
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24802
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/build.xmlI've dropped my guard before with the security and I had so much trouble with my computer because of all the people trying to attack my computer I just can't take the chance again. www.MySafetyGates.com
-
How do I change the sound that is played when you I use the Find my IPhone feature to make it alot louder? The current sound is very faint, difficult to find as I am hard of hearing.
Hi,
Tap the iPod icon in the Dock. Then tap the Airplay icon just to the right of the volume slider.
Make sure the iPad speakers are selected, not your wireless.
Carolyn -
I´ve just changed my apple id password, and when trying to use Facetime, after having entered such new password, it won´t fullfill the calls, nor can I receive incoming calls, it simply gets disconnected. What do I do??
iOS: Troubleshooting FaceTime
Unable to make or receive FaceTime calls after April 16, 2014
Using FaceTime and iMessage behind a firewall
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Using FaceTime
FaceTime, Game Center, Messages: Troubleshooting sign in issues
Maybe you are looking for
-
Record button not working in guitar lesson
Trying to record in garage band in the guitar lesson section and the record button is not working at all. Any ideas anyone? Thanks!
-
Powerbook won't sleep after OS install and update
I replaced the original hard drive with a new drive, installed OS 10.4 from the boot disk, updated to 10.4.11, replaced original apps and user folder via Carbon Copy Cloner. Machine runs great, but won't Sleep, either from Apple menu or closing the l
-
Hi, I'm using path resolver (Application.setPathResolver) in one application to resolve some external resources. (Using flex compiler oem) But, tight now, this resources only exists as byte[] (retrieved from a remote server). In order to use current
-
Hi! I have problems with this video card: in games it is really slow with max qulity of textures. textures are downloaded step-by-step and takes a lot of time ( 10sec). and after download FPS is too small. In Windows game with all max graphic setting
-
Photoshop Touch Up for Android Available in the Playstore - Now!
if your looking for a great tool to Touch up your Photo's have a look at this app from Adobe.. B33