"No Service" post - 1.1.2 upgrade

Good day all,
Since I upgraded my iPhone to V1.1.2 I frequently receive a "No Service" condition after my phone has been left on for some time. (overnight or longer) Other cell phones which have been on for the same time period (Nokia 8801) continue to show 4-5 bars, but the iPhone shows "No Service".
Moving the phone to another area (miles away in several cases) doesn't alleviate the condition. Only shutting the phone off and turning it back on returns me to 3-5 bars.
Is this unique to me and therefor an individual handset issue (I've had the phone since 6/29 and not experienced this previous to the 1.1.2 upgrade), or are others experiencing this issue? If so what have you done to correct it or notify Apple?
Thanks

I'm glad I'm not the only one experiencing this problem.
It all started on the 25th after work. I noticed the problem when phone vibrated saying that I had a voicemail. I was confused because my phone never rang and it lay in front of me the whole time. I went to listen the voicemail and I get a message saying that I wasn't allowed to do so, which I then noticed that I didn't have service. Again, odd because I usually have 4-5 bars while in my house. But then I saw that the voicemail was created 3 hours before I was alerted...
I haven't had service since. I didn't do anything to my phone that day that could possibly cause this effect. In fact, I don't think I used my phone that whole day.
I've tryed popping out the SIM card and ensured it was placed properly, I've tried restoring, I've tried resetting the network settings.. nothing seems to work.
Quote from another thread:
+"Will say I just got off the phone with AT&T because I was trying to call my wife and was getting Invalid Number error message.+
+Turns out they were updating blocks of routing numbers for voicemail and the messed up and entire blocks of numbers are offline for a few hours as they fix it. My wife got caught up in it." DaVBMan+
Needless to say: I'm irritated.
Message was edited by: Pleih

Similar Messages

  • Web Service is not working after Upgrade SAP EHP6

    Hi ,
    Recently we upgraded SAP ECC 6.0 to EHP 6.
    We have a custom web service which is consumed in  .NET Application to get the Sold To from Sales Order.
    the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
    When I tested the Service in WS Navigator in SAP, it is working fine.
    We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
    But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
    Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
    we did the below steps.
    Regenerated the configuration
    Re imported the Certificates
    Activated the service in SICF.
    Please let me know if anybody have same problem or if any steps we are  missing.
    thanks.
    Uma

    after changing the .NET Application , Service is working fine.

  • I have an iphone4 and that I have had for four years and they are saying that I am not eligible for an upgrade until the end of July 2015. That is four years and 3 months after I purchased this phone. "Customer service" said I had an upgrade at the end of

    I have an iphone4 and that I have had for four years and they are saying that I am not eligible for an upgrade until the end of July 2015. That is four years and 3 months after I purchased this phone. "Customer service" said I had an upgrade at the end of July 2013, which I did not. She said that in the system my husband took an upgrade July 29th 2013. He didn't even have a Verizon phone, he had a work phone with T-mobile. I have asked what device he supposedly upgraded to since no phones have been activated and we all still have our same phones and numbers. Remember at the time, said husband had a work phone with T-mobile. I still have the very same phone as do all of the rest of my family members. No one has upgraded. I spoke with "customer service" for more than a half an hour today, Char promised me that her supervisor (Emily) would call me back by 7:30 tonight to clear up this problem. Well guess what? No call back so where should I go from here? Any advice or help would be greatly appreciated. Thank you for your help.

    someone swapped upgrades.  Phone could have been sold For quick cash. 

  • Location services is stopped working after upgrading to iOS 5

    Hi, Location services is not working after upgrading to iOS 5. How can i switch it on?

    Try resetting the iPod.  I had to do that to get my iPod to show via FindMyiPod.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud.  I have iphoto '08,version 7.1.5.  Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that.  suggestions? thanks!

    I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud.  I have iphoto '08,version 7.1.5.  Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that.  suggestions? thanks!

    You have to buy iPhoto from the Mac App Store.

  • Exchange Server 2013 POP3 Service on CAS cannot after Upgrade to SP1

    Exchange Server 2013 POP3 Service on CAS cannot after Upgrade to SP1
    When I manual start MSExchangepop3 Service on CAS It show "The Microsoft Exchange POP3 Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
    In event log show POP3 EventID 1018 , 1019 , 1036
    It said like this blinding already use (0.0.0.0)
    The point is "IF I SET BINDING FOR 995 , MSEXCHANGE POP3 Service will automatic stop"
    Does anyone face this issue please?
    Thank you

    You could check what (if anything) else is running on that port.
    From a command prompt, type netstat -ano | find 995
    This will give you the Process Identifier (PID) for the process that is running on port 995. Then you can open Task Manager, add PID as an additional column, and find out what that process is.
    Hope that helps.

  • Stopping connections to Service Manager server during an upgrade

    Planning an upgrade from 2012 SP1 to R2. The more I read, the more questions I have. Document from MS says to make sure there are no connections to the Service Manager server during the upgrade. How is this possible? Most of our connections are through
    Citrix so we can check Citrix connections and disconnect them but what about local installs of the console on client computers? Is there some shell command to run to see active connections and terminate them? If so, how to you keep them from reconnecting?

    It's not really a big deal. just declare downtime and shut down your load balancer. a few errant connections won't cause a problem, but any changes that are submitted may not be saved.

  • Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!!

    Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!! Can someone help please?

    Hello I found my answer on Settings>>Restritions! :)
    Thanks to me:)

  • Given so many posts about problems, is upgrading to maverick worth it?

    Given so many posts about problems, is upgrading to OS X maverick worth it?
    I am content using Snow Leopard OS X 10.6.8.  But my most recent Garmin GPS map updates returned a message that stated, "Mac OSX 10.6 is an older OSX version that is no longer compatible with modern software. We will be ending support for this operating system soon.  To continue using Garmin Express, please upgrade your operating system."
    As others have noted, you don't hear from the users who have installed this upgrade successfully. I've read about problems installing the upgrade and then incompatibilities with other applications once it is installed. Would appreciate your experience and thoughts.  Thanks.

    There are several excellent suggestions here.
    What I did was clone my Snow Leopard drive to a second hard drive, then installed Mavericks on the clone.
    I now have a working Snow Leopard drive as well as a Mavericks drive. I bounce back and forth between them.
    I have symlinks set up so all my documents created on the Mavericks drive go to the Snow Leopard drive, but I have copies of all my applications on both drives. It just seemed easier...
    I had to disable App Nap in both Quickeys and Keyboard Maestro, but they both seem to work well, and neither is the latest version. (Well, Quickeys is the latest version, but it's not a recent version.)
    I only check email in Snow Leopard, never in Mavericks, so my Inbox is not scattered over both systems.
    The Mavericks disk takes longer to boot, and it does occasionally seem sluggish, but it's not a deal-breaker. Like many, I have some legacy software I use, so I don't want to commit to Mavericks full time. But it's nice being able to use both.
    I do like using Safari in full-screen mode, but that's the only program I use full-screen for.
    Hope this helps.
    Andy

  • No service in Iphone 3GS after upgrading to 6.0.1

    Hi,
    I have an Iphone 3GS with IOS version 4.1. Last saturday I upgraded it to IOS 6.0.1 and since then I get No service and Searching messages.
    I tried my SIM card in a different Iphone and it worked fine. I tried another working SIM card in my Iphone, and it also got No Service or Searching.
    I tried restoring, but still no luck.
    My phone worked fine till this upgrade, for both calls and internet connection.
    Any suggestion on how to proceed?
    Please techies, these devices should have a way to go back to a previosu version of the software which ws working fine.
    Thanks in advance.
    Best regards,

    It is obvious that I did not make myself clear in my first message.
    The problem is with the phone after doing an upgrade, It is an Apple issue, that is why I am posting it in this forum.
    Once more, "I tried my SIM card in a different Iphone and it worked fine. I tried another working SIM card in my Iphone, and it also got No Service or Searching." There is nothing wrong with the SIM card, it works fine, in fact I have it running in another phone till I sort out this issue.
    The upgrade does not depend on Movistar or any other carrier, and this problem is happening worldwide.
    I am afraid that you are misleading the problem.

  • Shocking, service from BT - Trying to upgrade to f...

    Probably the worst service I have ever received, and half wish I hadn't got involved with BT; again! 
    So 5 months ago, we moved house and started a broadband contract with BT for ADSL broadband. We had problems. I waited in from 1-6pm for an engineer to turn up. No show. Not surprised. Had to then spend ages on the phone to get another appointment booked. I can't fully remember how long this took but it wasn't quick. Anyway, long story short, we got it sorted eventually and have been impressed with the actual broadband service. It has been very reliable and consistent.
    Oh no, I forget, we did have a problem with a big drop in speed, this resulted in a lot of phone calls, and was not easy to get sorted, but we did in the end. So… 8/10 for service so far.
    It starts here; worst mistake, we decide to upgrade to infinity (which we have to have) to received BT sport through their TV package, incl. ESPN, HD, Eurosport and some documentary channels. Basically all the channels I used to watch on sky before we cancelled their service. Sounded good.
    17th Sept 2013 1-6pm - Engineer appointment. 
    Guess what? Yep you guessed it… No show. (Just Google BT engineer didn't turn up; a healthy number of hits)! Not surprised, at 5.45PM I called BT to check if the appointment was still booked.
    I was assured, a number of times, that they will be with me by 6PM. 15m left, I didn't think so!
    I was right, no one turned up; again!
    Then it starts… Call after call after call to BT. No one knows what is happening. Admittedly, my partner has been doing the majority of the ringing. We get promised that BT will call back on a certain date. That day comes and we hear nothing. So we call; again! This person then may try and help, but leads us up the garden path and round the block. We are going in circles. They tell us there has been a problem with the exchange. We speak to another person. They say there is no record of this on 'the system'. They tell us someone will call ANOTHER day. No one calls. Honestly, this is going on an on. We have been put through to supervisors, after getting some ridiculous excuses, but still no one is taking hold of our problem/order/situation.
    Anyway, we get some good news and all looks hopeful...
    Yeah right… we follow the instructions and end up back at step one.
    So today I call. I've yet to lose my temper as I don't actually know who to lose it too! But I am getting so fed up with this I'm going to ring the complaints line. Well, there isn't really one, you have to choose technical problems or order problems or whatever to log a complaint.
    Before I ring, I look up the number on the internet and that's when I realise the internet has stopped working. The Broadband light is flashing. Here we go!
    So I call, she looks at our order and, just like everyone else, doesn't have a clue with what's going on. I explain again and she starts to work out what the problem is. Hurray I'm thinking, we're getting somewhere. She puts me on hold while she speaks to a different dept. Lots of holding. Lots of checking. She come back to me and says someone has prematurely closed the order, this is why the internet has gone off. After 45mins on the phone with her, this one was from the UK, she says that she has put an official stop to it. I have to wait 24hrs, for 'the system' to update and then call another BT number. Excuse me! I HAVE TO CALL. Yes, I do. 
    Ok, so are we get somewhere now? I'm hoping so. Anyway, because of 'all the 'load of complete b******' I keep receiving, I decide to call this other number now, just to check the information. This number is for 'Technical support'. Mmmm. Doesn't sound right.
    After ages on hold, again, I get through to another BT guy. Takes him a while to get to grips with the situation and then works out what is supposed to be happening. On 'the system' the account is open. So I said, she said it is closed but will take 24hrs to update. He understands this and confirms that this is correct. Good, so I ask him if I have to call him again tomorrow to get this engineer booked out.
    He says "NO". I have to call another number and he said guess what? Yes, it is the number from the lady I just spoke to: 'Order management'. 
    What the hell?!?!?!?! 
    He seems nice and helpful and seems to know what he's talking about so at the moment I'm going with this. Tomorrow I will call and see what happens. If, as he said, the date is too far in advance, then push to speak to a manager to make it happen. Now I appreciate his advice indeed, but come on, why should I even have to call in the first place!!! But, rest assured, I will want an early appointment and I definitely want someone to turn up!
    I know I'm rambling on, but this is what the whole scenario is, constant holding, constantly going in circles and I'm writing this to show how bad BT's full service is. People are pleasant on the phone, but not efficient. Nothing is getting done. For christ sake this is a simple upgrade, just send me the modem and the new master phone point and I'll install it my end. I'm an electrician so isn't a problem.
    Can anyone tell me why there isn't one person that can take control of my order, liaise with all dept's of BT and sort it out for me? The fact that I have to call another dept is ridiculous after all this palaver!
    I'm not happy at all with the level of service from BT, very disappointed and would cancel if I knew it was going to be straightforward!
    My rant is ongoing, so we will see what happens tomorrow. No doubt on 'the system' it will say that an engineer turned up but couldn't get in!
    Hang on! My partner has just called up from her end! The person she spoke to says what we have been told is half wrong! They are going to call us tomorrow and book an engineer from their dept. What ever dept that is?! 
    This is terrible. We deserve some compensation from BT for this. But at the very least, some help! We just need someone to help us!
    We are waiting for a call tomorrow. I will keep you updated. My hopes aren't high!
    So I tried to post…Of course, I can't because the internet is not working! I'll find another way to get it on. Tethering!
    Solved!
    Go to Solution.

    Wow! What can I say?! Ridiculous!
    I am going to keep the commentary flowing on my order, on this post, to let anyone thinking of joining BT, know exactly what they will have to go through when things go wrong. Oh yes, and things certainly can go wrong...
    So, I got a call back, 3hrs later than promised, but at least I got a call back!
    "What seems to be the problem, Sir?"
    WHAT!!!!!!!!!!! You are supposed to be finding out and telling me?!
    Yes, it was someone completely different who called me back and I had to go through the whole Sarga again. Dont worry, Im getting used to it!
    Why couldn't the same person call me back? Anyway, So back to step one. I get put on hold for 20mins listening to morning mood over and over. He then comes back to me and says "So you have infinity installed but you can't get on the Internet?"
    Seriously, 20mins on hold for him to come back and say that! We,ve already been through this 20 mins ago. I talks over me as I start again, in baby language. Off on hold again...
    Transfers me to someone else after a colleague has a look with him.
    On hold....
    Morning mood... Again...
    Hello Sir, we seem to have a problem with your order and I'm just reading the notes. Can you hold for a bit?
    More than happy too...
    45mins so far (at least I'm not paying for this one, as I have been using my mobile previously to call, and 0800 isn't free- No landline phone available)
    He comes back on the line....
    Yes there is defiantly a problem with your order, he says. (By the way, we,re back in the UK, up north somewhere)
    He asks me for the best number to contact me on, again, and says that he is passing it over to a specialist team, called the Akrington team, I think he will take a detailed look through my order with a fine tooth Combe, and DEFINITELY get back to me WITHIN 24 hrs.
    Naturally, as you would if you were me, you,ve heard it all before and are taking it with a pinch of salt.
    Well I say, this is the last chance. If BT do not get back to me, I will not believe anything else they have to say. I am upgrading from broadband to infinity, seriously, how hard can this be????
    If there is a problem with the order, and there are multiple orders open on my account, then find my original upgrade request, with the details of what I ordered, close everything and start afresh!!!! Obviously logic can't be used with "The system"!
    So today, again, I have wasted the best part of an afternoon of my life dealing with this rubbish and going in circles.
    PEOPLE, PLEASE BEWARE AND THINK TWICE BEFORE JOINING BT. I have never complained on an open forum, I'm the type of person who can't be bothered to, but in this case, I feel I have to otherwise I'm not going to get anywhere.
    I'm just hoping the moderators on this forum, who've I've heard good things about, can help me sort this out in the next few days. I know it takes a few days for them to investigate and get back to me, (oh, I wonder why they are so busy? Lol) but I think that's what I'm now relying on, the moderators of this forum.
    Rest assured, I will keep this post updated, with good or bad news. I just want to show someone else who hasn't joined BT yet, what they might have to go through...

  • My App-V Server 5.0.1224.0 Service Pack 1 to SP3 upgrade experience

    I wanted to share my upgrade experience from App-V Server 5.1.1224.0 Service Pack 1 to SP3, in case it might be of help to anyone out there.  I've been hearing that some of you have resorted to uninstalling your SP1 and installing SP3 cleanly as a fall-back,
    but my OCD wouldn't allow me to do that...heh
    Resources used:
    http://technet.microsoft.com/en-us/library/dn858700.aspx
    http://www.applepie.se/app-v-5-0-sp3 (Thanks Nicke Kallen!)
    My environment:
    Remote SQL server (Management DB)
    Remote SQL server (Reporting DB, SSRS, and ReportingService)
    IIS server (Management service)
    Publishing Servers x2 (Publishing service)
    As Nicke stated in his post, SQL admins in an enterprise environment would laugh at you if you if you tried to hand them an .exe to run to perform the SQL portion of this upgrade.   The block of code that he provides in his post (link provided
    above) was all that was needed to perform the SQL database portion.
    Steps taken to upgrade:
    Update Database
    Install .NET Framework 4.5.1 on the Management server and Publishing Servers
    Install the SP3 update on the Management server
    Install the SP3 update on the Publishing server
    After restarting IIS, everything seemed to be fine.  I was able to Publish and Unpublish packages that were already in the system, but when I attempted to add a new package I received an error stating that the computer account did not have access
    to the package store.  This made no sense to me, as this permission had already been set in the past, so I double checked and it was still in place.  This lead me back to the first link I provided above, under the section titled "Check registry
    keys before installing App-V 5.0 SP3 Server."  Honestly, I did read this first, but I think I was like "there's no way they didn't include this into the installation bits'" and glazed over it.
    The first section titled ManagementDatabase key makes no sense to me, since I'm using a remote SQL server that doesn't have any App-V installation bits on it at all, and in an enterprise SQL permissions are not controlled
    in this manner.
    The second section titled ManagementService key:
    The critical parts of this section are as follows:
    MANAGEMENT_ADMINACCOUNT key:  Once I entered this and restarted IIS I was able to add new packages to App-V.  For this I used the service account that is bound to IIS.
    MANAGEMENT_DB_SQL_INSTANCE key:  Left blank in my case, as the default instance is valid.
    MANAGEMENT_DB_SQL_SERVER_NAME key:  I input the name of the remote SQL server.
    The third section titled ReportingDatabase key, again, makes no sense to be since this database was pre-created by SQL admins, therefore this key does not exist on the SQL server.
    The fourth section titled ReportingService key:
    Since the reporting services are on the same box as the SQL server in my environment, I was able to leave these values blank, but in normal environments where these roles are separated you will want to populate these with the appropriate values.

    Hi,
    the challenging point could be the database. I don't know if 4.5 SP2 would introduce any modification to the database (and if so... how 'old' SP1 servers would deal with that), but in theory it could happen that you upgrade server 1 (that you removed from ACE
    load balancing before), upgrade it and thus silently apply a change to the database.
    If the still unpatched server2 connects to that DB there could be issues. 
    As in Shared Cache mode a connection to the App-V servers is essential you should test that process in a test lab. Create a backup of your database, and use that along with two App-V servers to practice the migration in the lab. 
    If you can't do that, find a maintenance window that is long enough run and roll back. 
    Falko
    Twitter
    @kirk_tn   |   Blog
    kirxblog   |   Web
    kirx.org   |   Fireside
    appvbook.com

  • Apple TV 3 doesn't start Bonjour services after sleep since firmware upgraded to 6.0.2 (6646.81.1 build)

    I have upgraded my AppleTV 3 to firmware 6.0.2 for five weeks but always getting problem in Airplay my ipad2 and wired iMac to Apple TV3. Before that, the Apple TV3 in firmware 5.0 was fantastic in everything. Now, the all-time-sympton of my Apple TV3 waking up from sleep is:
    1) iPad2 in IOS6..1.3 can't find any airplay icon, same as my new iPhone 5s
    2) The wired iMac can't connect to AppleTV3 through Airplay, neither from Maverick's airplay icon nor from iTune's airplay icon.
    3) Further than that, the home sharing from AppleTV3 is found to be disconnected from iTune in iMac
    My port-scan towards ApplTV3 at this scenario is found all the Bonjour services are missing, including:
    *  Remote Audio Output  (port 5000)
    *  _airplay (port 7000)
    * _touch-able (port 3689)
    * Sleep Proxy Server  (port 57206)
    * _appletv-v2 (port 3689)
    My walk around at the moment is to restart AppleTV3, then all the Bonjour services come back and airplay, home sharing work again. However, this requires me to restart the box everytime I bring up the box from sleep. That means I have to turn on TV... quite fustrated.
    I'm wondering if there is any similar problem encounted and any fix.  Well, I can't find any formal description from Apple but their trouble-shooting document keeps saying to "restart Apple TV" as last resort.
    Tks in advance!

    I finally found the like-symptom causing the issue of missing airplay services on ATV box.
    Well, I have one airport express installed in my study room, which connects to the same LAN as ATV3 in living room. Today, I reset airport express to factory setting and reconfigured everything on AirportExpress, including its SSiD, wifi network key and device password. All of a sudden, my iPad, iPhone, iMac lost their airplay connection to ATV3. Port scanning found no airplay services on ATV3 box. It needed box restart to bring up airplay as my earlier walk around solution. I still performed reset -> restore for a "permanent fix".
    That said we might have airplay icon disappeared again if there were more than one airplay device on the same LAN that would interfere to each other. Working on one airplay device from ground start would cause airplay service of another box malfunction.
    My experience showed this twice. The first was happened when I put an airport express on the same LAN and I posted a thread here for help. The second was in this morning when i reset airport express to factory setting

  • Mail.app not connecting post 10.5.6 upgrade

    Since upgrading to 10.5.6 Mail no longer connects to any of my email accounts, including Exchange server and POP accounts (2). All I get is a timeout window. I have deleted Exchange account and tried to re-enter, but still unable to connect. There is not a connection problem with the machine because Entourage, running on the same machine can still connect (unfortunately had to fire it up when Mail threw in the towel). I have reinstalled OS 10.5.6 but to no avail.
    Does anyone have any ideas?
    Thanks

    G'Day Simon,
    Before you upgraded to 10.5.6 did you (and I ask this carefully) by any chance do a backup and repair disk permissions? It's a common question asked by most of the knowledgeable ones on this forum and I must admit I follow that process before I upgrade as too often I read of the sad stories here where problems are encountered.
    As a first step have you tried repairing disk permissions since the upgrade?
    Have a look at this post too just in case it is relevant.
    http://discussions.apple.com/thread.jspa?threadID=1829888&tstart=0
    Cheers
    Chris
    Message was edited by: 2point5

  • "No Service" on iPhone 3GS since upgrading to OS 4.3.1

    I've just upgraded my iphone OS to 4.3.1 & can no longer pick up any signal (locations in London where I have had no problem in the past & other phones are fine), I seen to permanently have the "No Service" message in the top left.
    So far I have tried:
    switching it on & off
    resetting using the sleep & home button
    resetting the network settings
    restoring from a backup
    taking the simcard out & putting it back in again
    Nothing has worked so far. As i understand there is no rollback procedure with Apple OS, is there anything else I can try?
    Not sure if it makes any difference but I have a Dutch T-mobile simcard but there's never been a problem using it back in London or upgrading in London. Any help appreciated!

    I'm having the same problem. The last couple of days my cell service has been weird - I'll make a call and it will immediately fail, for example.
    This afternoon I tried to make a call and it tried to connect (start ringing) for a loooooong time. I gave up and my service status went to "Searching..." and stayed that way. I am in an area with full 3G coverage, and our other iPhone (3G) and 2 iPads had full 3G signals. I was able to make a call with the 3G phone so I know it's nota service or signal issue.
    A few minutes ago I had full 5 bars but could not place a call. The status just says AT&T, not "3G" like normal. If I try to place a call it just hangs, and doesn't even say anything under the person's name (like where it normally says "calling" or "dialing" or whatever it is). If I cancel it will quickly flash to "calling" then immediately to "cancelled".
    This is really weird. Texts will not go through, either.
    I'm about to do a restore so hopefully that does the trick. FWIW, the phone is not jailbroken and never has been.

Maybe you are looking for