No shown files in ntfs with slash

Hello
I have a bit of a situation here... I have 100 gigas of photos in my external hard drive (NTFS, I know I am idiot for that), and the folders where the pictures are, have a slash in the folder name (I know, I am an idiot for that too). The thing is, I had OS X ML, and it worked, when I plugged my ext hard drive to my laptop, the folders were visible, in windows too but not possible to "touch" them, since they had a forbidden character, but I said, I will fix it in future...
Now I have installed an SSD with OS X Mavericks from zero, and I am not able to see the files... They are NOT deleted, they are there, and with Disk Drill I can see them as "existing files", but in finder I am not able to see those folders, no possible. Example of name of the folder is "2009/11 - Halloween". Disk Drill is the only idea I came up with, but is 100 USD, for recovering files that are not even deleted...
Any other solution that the community can give me? Can be virtual machines, and I have a windows computer that I can use... my programming skills are close to zero, but I am not "scared" of using the terminal, even though I do not know the commands of terminal. In terminal, with ls, I can see the folders with the name like "2009:11 - Halloween".
Just for the record, I went to Mountain Lion again too, and was not possible to see them either. So I am again in Mavericks.
PS.- I could rescue with any other free software, but the problem is that it gives me the pictures wihtout very good order and without any name, so I would have to go thru more than 30.000 pictures, something that I am not willing to do right now.

BTW, if I try to do something in Terminal with any of those folders that APPEAR like "2009:11 - Halloween", it gives me back error of "No such file or directory". So, ls can find them, but I cannot enter in them or copy them.

Similar Messages

After copying a file from NTFS to HFS volume, file size changed when viewing in Windows

Hi guys,
I have a Mac Air running Mavericks on a HFS partition and Windows 7 on a BOOTCAMP NTFS partition. I have some files that I want to read/write from/to both systems. Since OS X can't write NTFS and Windows can't write HFS either, and I don't want to use any 3rd-party tools/drivers, I have to adopt a "stupid" way: in OS X, I copy those files from NTFS to its HFS partition, make changes, then switch to Windows and sync them back to NTFS.
The problem is, after I copied a file from NTFS to HFS in OS X, it seemed ok. But when I switched to Windows, the very copied file in HFS partition had its size changed (bigger) although I didn't make any changes to it in OS X yet. This happens to almost every file I copied, text and binary. For those text files, I tried to open it with EditPlus in Windows and EditPlus reports the correct size on the status bar.
How could this happen?

I am not sure if this is what your seeing but...
The same unaltered file on two different volumes might use different amounts of disk space. This is because a 'disk' is divided in to 'blocks' and a block (also historically known as a 'sector') is a certain minimum size. So if disk-1 has a block size of 512 bytes and disk-2 has a block size of 1024 bytes then a file containing just 10 bytes will use up twice as much space on disk-2 as disk-1 even though it is the exact same file.
Beyond that, Macs can add additional information like Spotlight tags, labels, icons, etc. which make a file bigger. If you are modifying a file then presumably that also implies adding additional content e.g. for a Word document more text and this will make it bigger. Also depending on some programs are configured or designed 'deleting' text may only mark it as deleted and not really delete. This can apply to older versions of Word which has a 'Fast Save' feature, new versions have removed this and do a proper delete.
You would have to give more details like what you are doing to the document, what kind of document, and what the two sizes are.
Finally, there is one other potential difference, some systems and manufacturers use 1024 as a unit for measuring file and disk sizes, some use 1000. It will be the same number of bytes in each case but 1000 bytes in one case would exactly equal 1MB, and in the other it would be 0.9765MB.

Cant do a file get from external server using file sender adapter with ftp

Hi all,
Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
I have a requirement to do an ftp file get from an external server
From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues and communications are fine
Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
No messages appear in the RWB
Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
Regards,
Mike

Thanks for your responses.
I have found the error messages in the File Adapter Monitor
Scenario 1
When I prefix the source directory with a forward slash, eg /Folder/Subfolder the error message is as follows
EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified
Scenario 2
When I DO NOT prefix the source directory with a forward slash, eg Folder/Subfolder a different error message is returned
Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified
At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
Questions
I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
I thought that being a Sender adapter it would inherently execute a Pull or Get command
To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
Has anyone experienced these issues?
Please advise on next course of action?
Regards,
Mike

File sharing problems with my Media Player, an A C Ryan

I have a media player, an A C Ryan, hooked up to my wifi at home and it normally accesses all my hard disks that is plugged and shared on my iMac. I had no problems when the iMac was on Snow Leopard. Under Network/Workgroup in the AC Ryan's menu, I can see and access all the files on the hard disks.
The moment I upgraded to Lion, all such access was lost. The AC Ryan cannot connect to the hard disks any more via the wifi network. it's as though file sharing has stopped completely. I checked the file sharing settings on the iMac and nothing has changed i.e. the disks were shared as usual. After struggling with many possible solutions and failing (I checked out a lot of forums), I reintalled Snow Leopard and the problems were immediately solved.
Is there something seriously wrong with Lion's file-sharing? Has this been fixed in 10.7.2? My friend who has a similar setup (his media player is the WD Live) has exactly the same file sharing problem with Lion.
I would appreciate any feedback. Thanks!

I believe that NTFS-3G has issues with Lion.
I use Paragon NTFS and have had no issues at all. I am pretty sure that NTFS-3G will get updated, but you need to check their site to find out when.

Getting circle with slash at startup...

My computer started to get really slow one night so I decided to restart it, but then I ended up with the circle with slash error and couldn't now can't get past it. Here is what I have tried so far: Reset PRAM. Tried to "repair disc" using disc utilities, eneded up with an error (sorry, dont remember what the error was!). Had planned on re-installing the OS by erasing the hard drive, ended up with the follwing error "Disc erase failed. POSIX reports: The operation couldn't be completed. No such file or directory" Starting to think replacing the hard drive might be the easiest option, unless anyone knows what's going on?? Thanks!

((((((Were you doing this from the the DVD because that's the way to do it.))))))
Yes.
((((By now it sounds like you have written off the existing OS and want to reinstall it again. What problem are you having trying to do this?
Will it restart and allow you to boot into the DVD for you to reinstall?)))
Yep, it will allow me to boot from the dvd. I everything backed up on an external drive using time machine. When I tried to "restore system from back up" under "utilities" after inserting the DVD, there is a section where you select the disc where you want to restore your system to and my main hard drive isn't even showing up in the list...

Snow Leopard cannot read Files or Folders with Accents written by Windows 7

I upgraded to snow leopard on launch date in the process of ripping all my music to ALAC in OSX.
I brought it over to windows to encode it in the batch encoder in DV poweramp using Windows 7 RC1.
When I tried to copy the files back to OSX it could not read any files or folders with an accent in their name if they were written by windows. It thought the folders were aliases and kept trying to figure out what was wrong and mp3s it just continually tried to load.
It cannot read them on both FAT32 and NTFS partitions however plugging the FAT32 drive in a Vista computer it was perfectly able to read the files. Any ideas why this might be? I may try writing a file with an accent in the name via Vista later.

Whats odd, accents aren't giving me a problem but a little square unicode character is.
http://www.fileformat.info/info/unicode/char/25a0/index.htm
That is sorta what it looks like, maybe a bit smaller, windows can't open folders with that in it.
Mac chokes on your a accents e and all other varieties.

When I try to drag the iphoto library to the external disk a forbidden (circle with slash through it) icon appear. Why do you suppose it is preventing me from adding to external drive? These are pictures I have taken. I believe it cannot find the origina

When I try to drag the iphoto library to the external disk a forbidden (circle with slash through it) icon appear. Why do you suppose it is preventing me from adding to external drive? These are pictures I have taken. I believe it cannot find the original file. Please help.
Thanks.

What happens if you try to Option-drag the library to the EHD? The same icon?
Make sure the EHD is formatted Mac OS X Extended (journaled) with Ownership set to be ignored:
OT

Intermittent sound problems (circle with slash) since 10.9.1 upgrade.

My 27" iMac (mid-2011, 2.7 i5, 16g RAM) has had intermittent sound problems (circle with slash) since I upgraded to 10.9.1. I've reset the PRAM, used Disk Utility on the file permissions, tried Audio Midi, and sound prefs steadfastly refuses to use the internal speakers.

Did you install the latest driver set for the device? there is a new release on motu.com for mavericks.
rachel

Create XML file from ABAP with SOAP Details

Hi,
I am new to XML and I am not familiar with JAVA or Web Service. I have searched in SDN and googled for a sample program for creating XML document from ABAP with SOAP details. Unfortunately I couldn't find anything.
I have a requirement for creating an XML file from ABAP with SOAP details. I have the data in the internal table. There is a Schema which the client provided and the file generated from SAP should be validating against that Schema. Schema contains SOAP details like Envelope, Header & Body.
My question is can I generate the XML file using CALL TRANSFORMATION in SAP with the SOAP details?
I have tried to create Transformation (Transaction XSLT_TOOL) in SAP with below code. Also in CALL transformation I am not able to change the encoding to UTF-8. It's always show UTF-16.
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" version="1.0">
<xsl:template match="/">
 <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Header>
 <CUNS:HeaderInfo>
 <CUNS:InterfaceTypeId>10006</InterfaceTypeId>
 <CUNS:BusinessPartnerID>11223344</BusinessPartnerID>
 <CUNS:SchemaVersion>1.0</SchemaVersion>
 <CUNS:DateTime>sy-datum</DateTime>
 </CUNS:HeaderInfo>
 </SOAP:Header>
 <SOAP:Body>
 <xsl:copy-of select="*"/>
 </SOAP:Body>
 </SOAP:Envelope>
</xsl:template>
</xsl:transform>
In ABAP program, I have written below code for calling above Transformation.
call transformation ('Z_ID')
 source tab = im_t_output[]
 result xml xml_out.
call function 'SCMS_STRING_TO_FTEXT'
 exporting
 text = xml_out
 tables
 ftext_tab = ex_t_xml_data.
Please help me how to generate XML file with SOAP details from ABAP. If anybody have a sample program, please share with me.
Is there any easy way to create the XML file in CALL Transformation. Please help.
Thanks

Try ABAP forum, as it seems not to be PI related.

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

Since changing our computer I have been unable to download ebooks to my Reader Library I get a message Some file types associated with EPUB files are not associated with Reader Library; Waterstones suggest that I may have accidentally created a new Adobe

When I try to download them from the Waterstones website I get a message saying:
‘Some file types associated with EPUB files are not associated with Reader Library. Do you want to associate them now? When I reply yes I get another message; ‘Configuration error unable to update EPUB files check network firewall and try again’.
The ‘books’ are saved in the Download directory and I can’t transfer them from there to my E-Reader. I have not had any problems before, it was very simple; I saved the download and it automatically went into the Reader Library.
I contacted HP and they said it is a software error and suggested I contact Waterstones. I contacted Waterstones Customer Support and got the following response:
As the error message is specifically mentioning the firewall it does sound like something in the firewall settings is stopping the download from taking place correctly. However, the files should not be being saved to the Download folder. It would be worth trying again by going to your Digital Order History on your Waterstones.com account and pressing the download button, and then making sure to press "Open" not "Save". When you press Open rather than Save it should give the option to open the file with Adobe Digital Editions. If the firewall message still comes up then I'm afraid something is blocking it on your end.
If the above "Open" download method works but you then still get an error message it could possibly be that you have accidentally created a new Adobe ID when setting up on the new computer, rather than signing in with your old Adobe ID. It would be worth trying the aforementioned download technique again first, but if problems did still persist it would be worth calling Adobe themselves on 0207 365 0735, as they should be able to sort out any account issue.
In response to the first para of Waterstones email I already do what they suggest I do press ‘Open’ not ‘Save’ but I don’t get the open with Adobe Digital Editions (we have installed Adobe Digital Editions on the new computer. Waterstones say we may have ‘accidentally created a new Adobe ID when setting up the new computer’ does that mean that we shouldn’t have installed Adobe Digital Editions on the new computer as it would have already been there? How do I sign in with my old Adobe ID?

Hi all after attampting to get some supoport from adobe by phone.... nice people infurating policys as far as support for digital editions or DRM is conserned... However I got no where with support.
I ended up instaling Digital editions on my desktop PC and going through the motions of registering and borrowing a book then returning it. Then I trying on my iPad, Bluefire worked, Over drive did not so I completely removed Overdrive and reinstalled and re registered. all working now.
Maybe some one at adobe did something. Maybe the install of the adobe DE client on a PC corrected what ever was out of wack with my account. Mayby the server that my account lives on did a scan disk and corrected a bad clustrer.
What ever happend My account is actiove and working again. hope this helps others.

How to file a Complaint with Verizon

I don’t know how to file a complaint with, or about, Verizon customer service. After calling Verizon I was shuffled between departments, supervisors, and finally directed to “verizon.com/contactus”. After spending an hour browsing the “contact us” section of the website, it became abundantly clear that I would not be able to find what I was looking for on the website.
A month ago I was in the middle of the moving process and was dreading the seemingly inevitable process of setting up the internet/television/phone, a process that I had to do many times before. My son had informed me of Verizon’s transfer service, also known as “Moving with Verizon”. As we were only moving 3 miles down the road, I figured that I would visit my local Verizon store as this would continue to be the store I turn to if I chose to stay with Verizon. I had several concerns that I wanted to have addressed, chief among them were:
- I have built up a significant number of movie titles in my digital library. If I stay with Verizon, will I be able to keep the movies that I had purchased?
- Each time I move I am inconvenienced with having to distribute my new phone number to my friends and family. Will I be able to keep my current phone number if I stay with Verizon?
- When I first started with Verizon I had significantly less credit with Video on Demand than I do now. If I stay with Verizon, will I have to go through the grueling process of building up my credit again?
The sales associate was very kind and willing to help. I was assured that
-          I should be able to retain my purchases with Video On Demand
-          I can bring my phone number from my previous address
-          My Video on Demand credit could possibly be reset after the transfer, but a single phone call to customer service could set my credit back to normal with minimal effort
Throughout my questioning I was assured that my current services would transfer uninterrupted by the time of the move. As you could imagine I was ecstatic. We scheduled a technician to show up to the new house, when I asked the representative on the phone “What should I do with my current cable boxes and internet router while I wait for the technician?” I was told that the technician would handle it.
The technician arrived two weeks ago, we were given a box and instructed to package the previous equipment and drop it off at our local Verizon store. The technician gave us our new number, when we asked him about our previous number he appeared to not know what we were talking about.   He was apologetic about the mix up and gave us a phone number that we could contact. Shortly after the technician left, my family noticed that our digital library was completely empty. The next day I went back to the Verizon store, was apologized to, and then instructed to only place one order in at a time, because multiple orders on a single account tend to slow each other down. We decided to resolve the issues one at a time starting with the phone.
My wife called and was told to wait a day or two. After waiting two days, my wife informed me that she was bounced between different departments over the course of several days, but was assured that the issue was resolved. I told my wife that I would handle the future endeavors with Verizon as she appeared to be a little flustered by the experience. I later received a courtesy call from Verizon confirming that our phone number was restored. I asked the lady whom I was talking to whether she could help me with my VoD service or transfer me to someone who could. She assured me that she could help and asked me whether or not we had received new set-top boxes for our televisions. After I informed her of the new boxes, she apologized to me and informed me that due to copyright infringement laws that our digital library was lost and that we could not receive any kind of compensation. I decided to call customer service, and after talking to representative for almost half an hour I was placed on hold and then told that there was nothing that could be done at this time and that I was going to be disconnected, before I could respond I was hung up on.
Three nights ago I took my concern back to the Verizon store as I dropped off our previous equipment. I was given several new phone numbers. That evening I spent over 2 ½ hours on hold waiting for a representative. After explaining my situation I was transferred to another representative who worked with me and put in a work order to have our digital library restored. I was quoted 48 hours, but the issue was resolved that evening.
Not intending to cause any more issues with Verizon until our digital library issue was resolved, my family abstained from renting or purchasing any movies from Video on Demand. I had promised my son and grandson that if the movies were restored, I would add the new Star Trek movie to our library so that we could watch it together. I was slightly irked to realize that when I tried to add a new title to my library an error message would pop up. I called the number on the message and entered the error code. I was placed on hold for almost an hour. When I finally reached a representative, he informed me that the problem was that my credit had been reset during the move and the issue could only be resolved by another department which had just closed for the evening. I decided to work at home the next day so that I could watch the movie when my son came home that evening. The next morning I called and realized that the opening time quoted to me was obviously in a different time zone. When I finally reached an agent, 2 hours later, I was told that I was 5 dollars over my credit limit. I informed the representative of my situation, as proof I pointed to the fact that the bill that I had paid earlier this week was almost 200 dollars more than my current statement. I was asked to wait 30 minutes and to call back if the issue hadn’t resolved itself within an hour. An hour later I called, explained my situation to another representative, and was told to call back in an hour if the problem hadn’t resolved itself. An hour later I called and after being sent to several different representatives I was asked to call back in an hour if the issue hadn’t resolved itself.
Meanwhile my wife was contacted at worked by Verizon, informing her that there was no record of us returning the equipment and that we could be facing additional charges if we did not straighten out the issue. After spending the next several hours assuring my wife and showing her how on the receipt, each piece of equipment was clearly scanned and entered into the system, I decided to call customer service again as my VoD was still displaying the same error message. I was apologized to yet again, and was told that my order was being slowed down due to a high number of unresolved issues on our account. I was assured that he would clear out the mess and that we should be able to order movies that evening, if not I should call back in 24 hours. I apologized to my son and grandson yesterday evening, both of them took it surprisingly well. This evening I waited until 7:30 to contact customer service (31 hours after I was told to wait 24 hours), I was placed on hold again and again for over an hour and a half. I finally was told that my account would be cleared out to resolve the issue, I informed the gentleman that I was already told that would be done and then referenced the ticket number that I had received (and double-checked) from the gentleman the day before. After speaking to his supervisor about the issue I was informed that there was no record of this action nor was there any ticket number matching the one I had given him. The gentleman tried to help me for several more minutes until he transferred me to another department because neither he nor his supervisors could understand why my account wasn’t letting him change the date on my ticket, as he had reset all my resolved issues.
I explained my situation to the representative who after reviewing my account information informed me that I could have had the issue resolved on the 29th of August but someone during my process removed my order. She then informed me that due to the number of unresolved orders on my account the system could not let her schedule a credit increase until the 26th of September. After repeatedly asking her what I could do to expedite this process, I came to realize that all she could do was repeat to me the information that she had already said. I then asked her who I could talk to resolve this issue or file a complaint. After rambling for several minutes I was then transferred to the billing department. After explaining my situation, yet again, to another representative, my account was reviewed again, and I was once again informed that I was over my credit limit. After going into details a little more intimately, I was assured that the earliest that I could receive the credit increase was the 26th of September, and that I should make another payment. I informed her that I had just paid over $550 dollars on my last bill and had given up the majority of my free time over the last 2 weeks trying to resolve issues that I was assured wouldn’t be a problem by a Verizon representative.   I asked if I could receive a small credit to my account ($30) so that I could just watch the movie and feel like I received a small victory for sacrificing so much of my time. She informed me that only her supervisor could make that call. She informed me that I would have to wait around 15 minutes on hold (what’s 15 minutes when I’ve already waited 8+ hours on hold?). After explaining my situation to Cornell he reviewed my account and then reworded what I had just told him. He informed me that the department that deals with my issue (the department that just transferred me to billing) was now closed and that I would have to wait until Tuesday (4 days) to have my issue resolved. After explaining the fruitlessness of dealing with that exact department with the exact information he was trying to send me off with, he placed me on hold for several minutes and then came back and agreed to only meet me half way, a $15 dollar credit. I was extremely offended. This is not even 3% of my average bill. $15 for 2 weeks of unsatisfactory service, in addition to 12+ hours of my personal time in addition to my wife’s time and visiting the Verizon store. After explaining to Cornell that $15 was less than satisfactory, I asked for an email address or a complaint line. He agreed with me that it was frustrating and explained to me that it was getting late for his department “almost 11:40 in the evening”, the exact time where I am. He gave me Verizon.com/contactus, which after reviewing the page, I became insulted. I have continually followed up with my phone calls and stayed loyal to Verizon, following the instructions of each representative that I have talked to in the last several days.
Verizon has provided both my family and me with an excellent entertainment package as well as outstanding customer service in the past. I would like to believe that despite the fact that I was lied to by both a sales representative and a supervisor that my family’s experience over that last few weeks with Verizon is not a common one. I am more than willing to place this movie order on my next bill, all I ask is that you please help me to enjoy the advertised early release and to enjoy the services I previously had with your company.

We've been having problem with our Verizon Fios set up since the moment we moved in to our new place. We've had several technicians come through, and then eventualy aftet two weeks of setting up appoitments and calling the customer service folks, they were finally able to resolve the issue. However, the nightmare doesn't end here. Last week, our neighbors switched over to Verizon Fios, and their technician swtiched our cables with theirs ( what a sloppy, lazy, job) meaning that they unplugged everything that was running to our apartments and transferred over to their becuase they didn't want to put in the extra work to chech and make sure that everyone was getting service. After, we had noticed the problem, my husband called customer service to put in a ticket for the technician to come through and resolve the issue. The ticket was made for Wednesday, Nov 7th, 2013 under ticket number {edited for privacy}, the rep had clealry stated that a technician will come anytime from 3 - 7, which meant that one of us had to be home. My husband took off work and waited for the technician to come through, however, NOBODY showed up. Instead, they told us that they were came at 5 oclock but nobody was home. The same day we called customer service again, and reschudeled to the next day. Thankfully, someone showed up at literally 7pm, meanwhile my husband was waiting at home since 3pm. After hounding them down and calling every hour to make sure that they would show up. Sure enough, they coudn't fix the wiring with out a bucket truck, which the technician mentioned he didn't have since it was already late in the game and eveything was closed. So again, my husband called to make another appoitment, for Saturday, November 9th, 2013, and again, the customer service people confirmed that someone will show up on this day from 8am-12pm. Guess what!? NOONE came, because NOONE issued a ticket, meanwhile we knew for a FACT that we made an appoitment. It's been one week, and no end to this problem. I am appalled, that a multibillion dollar company such as Verizon has such poor customer service in this area. It is sickening and sad, that noone can come and fix a small issue such as this. I hope that this will be resolved tomorrow, ( as they confirmed that they will come on Sunday) if not we have no other choice but to cancel our services and switch to something else. If only Google fiber was in town, things would have been so much easier, and not OVERPAID, especially now with the CRAPPY service we've been getting.

How to see .gif files in iOS with animations ?

how can i view .gif files on iphone with animations

Welcome to Apple Support Communities
You can't see by default hidden files through Finder. However, you can do it with a command that you can copy in Terminal (in /Applications/Utilities). Open this application and type:
defaults write com.apple.finder AppleShowAllFiles TRUE && killall Finder
After doing it, you will be able to see hidden files through Finder in all the volumes connected to the MacBook Pro

Unable to find ODI_SAmple_DATA.zip file to work with oracle profiling.

I am unable to find ODI_SAmple_DATA.zip file to work with oracle profiling.Any help regarding profiling???Do i need to
copy it from sw installation folder.?How profiling is different or related to odi data quality???Do we take source data twice -
1) For ODI target load
2)For profiling into entities.

Try:
http://www.oracle.com/technology/products/oracle-data-quality/pdf/oracledq_sample_data.zip
and
http://download.oracle.com/otn/nt/ias/101340/oracledq_sample_directory.zip
Hope this helps.
G

I saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????

i saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????

THis is safe for Mac's? Sorry, I have just never heard of this site before.
And there are literally tens of thousands of sites of which I've not heard, too. Not this one.
It's legit. There are lots of links in Apple Support Communities to the LibreOffice web site, as well as others that are legitimate open-source developers of options to buying MS Office, such as NeoOffice and OpenOffice. I have Open Office installed on one of my older Macs that can't run Office 2011 and it is rock-solid.
I've been here too long to start posting bogus urls now.

No shown files in ntfs with slash

Similar Messages

Maybe you are looking for