No SOAP Envelope but 1 {'}Values; HTTP 200 OK

Hi Experts,
I am configuring a scneario IDOC to SOAP , Asynchronous call to an https url that is available through internet.
When I try to post message to this url. I am getting following error:
SOAP: call failed: java.io.IOException: No SOAP Envelope but 1 {'}Values; HTTP 200 OK
in SOAP Adapter Log. Due to this error the message is set to NDLV.
I am using PI7.1
My Receiver Channel configurations are as contain
the third party url https://target with username password authentication. I have also imported client certificates.
Webservice host says its a problem with PI system and SAP says that its issue with Webservice.
Please let me know how can I resolve this issue. Am I missing something in my configuration. This is kind of a burning issue currently any help will be appreciated.
Regards,
Raj

Hi Raj,
This looks strange. If the error text is telling the truth, your SSL connection was working and you could even reach some service that returned HTTP 200 OK. But this service didn't return a SOAP response. I don't know what 1 {*} Values means. It sounds broken to me. You can open a ticket.
But the reason why you didn't get a valid SOAP response (either a good one or a fault) is probably that your target URL is incorrect. Verify the URL and run the scenario with the relevant components (refer to the SOAP adapter FAQ note) on DEBUG. The default trace file should give you more information about this apparently corrupted response.
Best regards, Yza

Similar Messages

How to resolve error "No SOAP Envelope but 1 {} PARAMETERS"

Hi,
I have configured an interface where the sender (SAP system) sends out a message via proxy on the Local Integration Engine, which is after XI processing supposed to be posted via HTTP (using the SOAP Adapter).
The message is processed correctly by XI, but fails to pass the SOAP Comm Channel. The error message in the Communication Channel Monitoring reads:
SOAP: call failed: java.io.IOException:No SOAP Envelope but 1 {} PARAMETERS; HTTP 200 OK
Can anyone help me understand what this means and how I can resolve this? Thanks!

Dear Johannes,
Is the SOAP call taking place synchronously ? It looks like at the end of your SOAP channel, system is not responding as expected by XI (you seem to receive the regular HTTP 200 OK code, but it does not match SOAP protocol requirements) ...
I've had such issues when web services were down due to web server issue (in this case, you just get, for instance, HTTP 500 response body, which not really SOAP compliant)
Rgds
Chris

SOAP Response change from http 200 to http 204

Hello
I must change for a application, that call a webservice on the pi, change the
SOAP Response from HTTP 200 OK to HTTP 204. I think that must chnage on the SOAP Adapter and wei can't change in the messages or mapping. Also wit a Fault Messages is this not runnig.
What is with BPM, have any body do somthing with that.
Regards Tom

Hello Stefan
This thrid Application need this response. We cann't change this. We spaek with this product manager, but he want change this. He want this when the interface is async, that application now no conntent come back.
Regards Tom

SOAP to SOAP / HTTP 200 error

Hi
I have the following scenario SOAP to SOAP and am getting a HTTP 200 error.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200
I have configured a sender SOAP channel with default values (Nothing is checked). My receiver channel is configured in a similar manner. The SOAP action is specified. I have tested the receiver webservice in WSNavigator and successfully can get it to call. The webservice was created from a function module that has used the create webservice functionality, and then endpoints created in SOAMANAGER.
There are no mappings in this scenario.
When I right click on the sender agreement and get the WSDL, I take that URL and place it into the WSNAVIGATOR tool. I supply the same values that I did when I called the service directly. When I execute, the error above appears in SXMB_MONI.
Ideas?

Here is the error. There is no principle propagation and the user is setup in the BI system.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Edited by: Mike Marowski on Feb 18, 2010 12:12 AM

SOAP scenario "Do not use SOAP Envelope" check problems

Hi Gurus!
I'm again here.
I've an scenario with SOAP Receiver, the WS do I need consume, looks like:
POST /SumTotalws1/services/Authentication.asmx HTTP/1.1
Host: xxx.xxx.xxx.xxx
Content-Type: text/xml; charset=utf-8
Content-Length: length
SOAPAction: "http://www.sumtotalsystems.com/sumtotal7/sumtotalws/Authentication/Login"
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
 <Login xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/Authentication/">
 <credentials>
 <Username>string</Username>
 <Passcode>string</Passcode>
 <AuthenticationType>NotSpecified or Anonymous or NTAuthentication or Passport or LDAP</AuthenticationType>
 <AccountType>NotSpecified or WebService or WebUI</AccountType>
 </credentials>
 </Login>
</soap:Body>
</soap:Envelope>
but the response looks like:
HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
 <UserToken xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/">
 <Value>string</Value>
 </UserToken>
</soap:Header>
<soap:Body>
 <LoginResponse xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/Authentication/" />
</soap:Body>
</soap:Envelope>
when I create my communication channel with "Do not Use SOAP Envelope" uncheck it, all run ok, but I only get in response message "<LoginResponse>" and I need <UserToken>
When I check it "Do not use SOAP Envelope" and I use XSLT mapping to add SOAP Env to request message, I get response message empty.
I tried the web Service with the message that I obtained from de XSLT mapping in the program SOAPUI. I get ok response with the <UserToken> value.
some idea to solve this problem??
Thanks in advance.
Edited by: KrlosRios on Sep 30, 2011 8:07 PM

Hi, thanks for your answer.
Can I use AXIS to execute any WS?
The WS that I tried execute looks like this:
POST /xxxx/services/Authentication.asmx HTTP/1.1
Host: xxx.240.106.39
Content-Type: text/xml; charset=utf-8
Content-Length: length
SOAPAction: "http://xxx/Authentication/Login"
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
 <Login xmlns="http://xxxxAuthentication/">
 <credentials>
 <Username>string</Username>
 <Passcode>string</Passcode>
 <AuthenticationType>NotSpecified or Anonymous or NTAuthentication or Passport or LDAP</AuthenticationType>
 <AccountType>NotSpecified or WebService or WebUI</AccountType>
 </credentials>
 </Login>
</soap:Body>
</soap:Envelope>
and for the response:
HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
 <UserToken xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/">
 <Value>string</Value>
 </UserToken>
</soap:Header>
<soap:Body>
 <LoginResponse xmlns="http://www.sumtotalsystems.com/sumtotal7/sumtotalws/Authentication/"></LoginResponse>
</soap:Body>
</soap:Envelope>
also I found in Trace node in SXI_MONITOR, jus before execute response mapping :
<Trace level="1" type="B" name="PLSRV_MAPPING_RESPONSE"></Trace>
<Trace level="1" type="Timestamp">2011-11-01T19:33:34Z UTC-6 Start of pipeline service processing PLSRVID= PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace>
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV"></Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Das Mapping wurde bereits in der Interface-Ermittlung bestimmt. </Trace>
<Trace level="3" type="T">Objekt-Id des Interface-Mappings 8594D8C2E6DA3C008F45B112FFCC86B8 </Trace>
<Trace level="3" type="T">Versions-Id des Interface-Mappings C3BB8FB0A1D511E0A688E9FCB9F06E16 </Trace>
<Trace level="1" type="T">Interface-Mapping http://xxxxx.net/pi/lms/Authentication OM_LMS_Authentication </Trace>
<Trace level="3" type="T">Mapping-Schritte 1 XSLT Response_LMS_Auth5 </Trace>
<Trace level="3" type="T">MTOM-Attachments werden nicht in die Payload überführt. </Trace>
<Trace level="1" type="T">Payload is empty. </Trace>
<Trace level="3" type="T">Dynamische Konfiguration ist leer. </Trace>
<Trace level="2" type="T">Modus 0 </Trace>
<Trace level="2" type="T">Call XSLT processor with stylsheet Response_LMS_Auth5.xsl. </Trace>
<Trace level="3" type="T">Method fatalError called, terminate transformation, because of
Thrown:
javax.xml.transform.TransformerException: java.io.IOException: Parsing an empty source. Root element expected!
 at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:250)
Say Payload is empty.
and in left directory tree, not exist "payload" node, only existe SOAP Body and in "Manifest" node looks like this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Manifest wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<SAP:Payload xlink:href="cid:att-60c3078b066911e1bc1500000093b25a @sap.com">
<SAP:Name>MainAttachment</SAP:Name><
SAP:Description>Main document</SAP:Description>
<SAP:Type>Application</SAP:Type></SAP:Payload>
</SAP:Manifest>
Thanks for your help.

Problem in mapping while using Do not Use SOAP Envelope

Hi All,
This is wrt my thread 'Removing and adding SOAP Envelope'
I am currently working on SOAP-XI-Proxy Scenario.
For some un avoiadable reason, I had to use the option 'DO not use SOAP Envelope' .So the SOAP Envelope came withen the payload and in the pipeline, I can see the payload prefixed by '<?xml version="1.0" ?>' .
Now my payload looks like
<?xml version="1.0" ?> ( no more the encoding="utf-8" notation is there)
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
 xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<Complaint_Request xmlns="urn:******createserviceticket">
<CaseNo>12345</CaseNo>
<CustomerNo>12345</CustomerNo>
</Complaint_Request>
</soapenv:Body>
</soapenv:Envelope>
To accomodate the change, I also changed my request structure as
<Complaint_Request> (My new message Type)
 <Envelope>
 <Body>
 <Complaint_Request> (My previous message Type)
 <caseNo>
 <CustomerNo>
But I am facing problem in mapping the values to the target structure (which is a flat structure),
as the payload doesnot start with ' ns1: ' notation any more . Even XSLT mapping is not working.
When I am pasting the payload in the Testing Mapping Editor, the Source Node are correctly
formed, but all come in RED . But as the root node , ie 'ns0' is not there, the value
from child nodes are not getting mapped to the target fields.
Regards,
Subhendu

Hi Joel,
SAP says, when we use the option 'DO Not Use SOAP Envelope', the payload also contains the SOAP
Envelope. So it is obvious that the payload wont start with 'ns0' notation.
So I am searching for a solution, when we use that option.
Regards,
Subhendu

No SOAP Envelope error in SOAP Receiver Adapter

Hello Friends,
Informaiton:-
I have configured one Synchronous scenarion for SAP R/3 to PI 7.1 to Java based web applicaiton.
On the Receiver/Outbound side, i have configured the SOAP Receiver Adapter with the Target URL and SOAP Action.
Outbound and Inbound service interfaces have Request/Response and Fault messages.
Issue:-
While sending the Message, Below error is noticed in ABAP stack SXMB_MONI during the Call Adapter Stage and also in RWB (Channel Monitoring) .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP Envelope but 1 {}RESPONSES; HTTP 200 OK
I also found that Request message is not reaching to the Java Web server.
I am taking the Same message Payload (found at Call Adapter Stage) and ussing it in XML Altova SPY Web client tool. There it is running scuccessfully and getting the Response message.
please suggest.
Thanks & Regards
Jagesh

Hi,
Yesterday i consumed the same WSDL file in Altova XML SPY and there it is working, getting the Response.
Now comparing the SOAP Request message reaching to the Third party Web server (which fall within the same Lane network)
from SAP PI and Altova XML SPY tool. I used TCP Gateway for the below scenarios.
(1)First i sent the SOAP message from PI and observed the RESPONSE message without the SOAP Envelope in TCP Gatway Trace and hence i am getting the No SOAP Envelope Error in PI.
(2)I consumed the same WSDLfile in Altova XML SPY and sent the SOAP message, here i got the Proper SOAP Response message and hence success in this case. (Used the same Data Payload as used in point 1)
(3)Now to identify the issue in the SOAP Request message being sent from PI, i used the same SOAP message sent in step 1 here, that means copy the entire SOAP ENvelope from the TCP gateway Trace and pasted it in Alota Spy and sent, there it is found running (got the response message from Third Party server).
One difference i found in HTTP Protocol statements in SOAP Request message in Point no 1 and Point no 2 above.
HTTP Protocols in Point 1 (Through PI).
POST HTTP/1.0
Accept: /
Host: 172.24.138.142:4544
User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
CallingType: SA
content-id: <soap-00306EEAC2051ED1839136CEE8564900 sap.com>
Content-Type: text/xml; charset=utf-8
Content-Length: 1195
SOAPACTION: "Action1"
HTTP Protocols in Point 2 (Through Altova).
POST / HTTP/1.1
Content-Type: text/xml
User-Agent: XML Spy
SOAPAction: "Action1"
Host: 172.24.138.142:4544
Content-Length: 1195
Connection: Keep-Alive
Cache-Control: no-cache
Thanks to Mr. Stefan Grube for writting such a nice blog.
Troubleshooting SOAP, HTTP and Mail Adapter Scenarios with TCPGateway
Experts, please suggest me further.
Thansk & Regards
Jagesh

No SOAP Envelope

Hi,
First time post. New to PI. Am in the process of developing my first PI scenario. Almost works but not quite. Looking at SXI_Monitor I can see the data hitting PI and being passed from the Outbound Interface to the Inbound Interface. The last step is to consume the web service defined on the Receiver communication channel. However, when this is done I get the following error:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Body>
 <SOAP:Fault>
 <faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
 <context>XIAdapter</context>
 <code>ADAPTER.JAVA_EXCEPTION</code>
 <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: No SOAP Envelope but 1 definitions; HTTP 200 OK
 at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:455)
 at com.sap.aii.af.ra.ms.impl.core.queue.consumer.CallConsumer.onMessage(CallConsumer.java:134)
 at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:917)
 at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)</text>
 </s:SystemError>
 </detail>
 </SOAP:Fault>
 </SOAP:Body>
</SOAP:Envelope>
Have seen other threads on this on here but none have helped. As far as I can see the SOAP Action field is correctly defined and it should work.
Anybody know what the "No SOAP Envelope but 1" error is telling me ?
Cheers,
Paul Clements.

<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: No SOAP Envelope but 1 definitions; HTTP 200 OK
The result shows that WSDL URl in the soap receiver adapter is not fully write. correct it.
Stefan says dont even bother testing PI. We want you to
a) Load WSDL in soap ui
b) fillup user and password
c) target url (dont use PI wsdl url)
d) test it
if you get response fine, then copy the url used in soap ui and paste it in the soap receiver cc. you will be all set.

'/soap:Envelope ' in extract throws invalid token error

I'm receiving xml via webservice/soap and placing in an XMLTYPE table. Upon trying to execute a test query:
SELECT
EXTRACTVALUE(VALUE(d),'Destinations/CountryID') AS ID
FROM X_TEST p,
TABLE (xmlsequence(EXTRACT(p.object_value,'/soap:Envelope/soap:Body/GetUserDestinationResponse/GetUserDestinationResult/DestinationResults/DestinationsList//Destinations'))) d
I get an error similar to: (note path here in error is diff than above extract statement)
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: 'soap:Envelope/soap:Body/GetUserDestinationResponse/GetUserDestinationResult/DestinationResults/DestinationsList/Destinations/DestinationList/Destination//Provider'
Without the soap:Envelope/soap:Body there is no error. Is there a problem using the ':' here?
Here's a snippet of the stored xml:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body>
<GetUserDestinationsResponse xmlns="http://xxx.xxx.xxx.xx/somesite_ws/">
<GetUserDestinationsResult>
<DestinationResults>
<DestinationsList>
<Destinations>
<CountryID>101</CountryID>
<CountryDescription>Indonesia</CountryDescription>
</Destinations>
</DestinationList>
</DestinationResults>
</GetUserDestinationsResult>
</GetUserDestinationsResponse>
</soap:Body>
</soap:Envelope>

Thanks,
that set me in the right direction - I had tried the third parm before but must not have been just right being that there are multiple namespaces given. Appears I have to always use the namespace parm to accurately obtain the data. To conclude - this is what I ended up with to get this returning data properly:
SELECT
EXTRACTVALUE(VALUE(d),'/Destination/DestinationId', 'xmlns="http://xxx.xxx.xxx.xx/some_ws/"') AS ID,
Get_Point(EXTRACTVALUE(VALUE(d),'/Destination/Longitude', 'xmlns="http://xxx.xxx.xxx.xx/some_ws/"'),
EXTRACTVALUE(VALUE(d),'/Destination/Latitude', 'xmlns="http://xxx.xxx.xxx.xx/some_ws/"')) AS geom,
EXTRACTVALUE(VALUE(p),'/Provider/ProviderName', 'xmlns="http://xxx.xxx.xxx.xx/some_ws/"') AS provider_name,
EXTRACTVALUE(VALUE(p),'/Provider/ProviderSpecific/HospitalInformation/whoAvainFlu', 'xmlns="http://xxx.xxx.xxx.xx/some_ws/"') AS avaianflu,
VALUE(p) AS xmlb
FROM X_MEDAIRE xml
,TABLE (xmlsequence(EXTRACT(xml.object_value,
'/soap:Envelope/soap:Body/*', 'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"'
))) e
,TABLE (xmlsequence(EXTRACT(VALUE(e),
'/long/path/after/soap', 'xmlns="http://xxx.xxx.xxx.xx/some_ws/"' ))) d
,TABLE (xmlsequence(EXTRACT(VALUE(d),
'/Destination/ProviderList/Provider', 'xmlns="http://xxx.xxx.xxx.xxx/some_ws/"' ))) p
WHERE
EXTRACTVALUE(VALUE(p),'/Provider/ProviderType', 'xmlns="http://xxx.xxx.xxx.xxx/some_ws/"') = 'Hospital'

APEX 3.0 Web Service OWS-04052 unrecognized operation SOAP Envelop

Hey,
I run into a problem with WebServices. Short, I implemented a WebService with JDeveloper and now I would like to create ws references in APEX. The ws is working 100% correct so the problem is, that APEX creates a soap envelop which is not 100% correct...
So blabla here it is what APEX generates for request:
<?xml version='1.0' encoding='UTF-8'?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Body>
<ns1:projectId
xmlns:ns1="http://impl.planning.services.model.azima.promatis.com/">2</ns1:projectId>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Now the request which should be sended: (from EM Console)
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body xmlns:ns1="http://impl.planning.services.model.azima.promatis.com/">
<ns1:getAllElementsOfProject>
<ns1:projectId>2</ns1:projectId>
</ns1:getAllElementsOfProject>
</soap:Body>
</soap:Envelope>
Compare and you will see that the operation info is missing. So it's almost the same but the operation 'getAllElementsOfProject' isn't in the request.
If it helps I could also send the wsdl if requiered for help.
So I run into the following error:
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://impl.planning.services.model.azima.promatis.com/"><env:Body><env:Fault><faultcode>env:Client</faultcode><faultstring>Caught exception while handling request: unrecognized operation: {http://impl.planning.services.model.azima.promatis.com/}projectId</faultstring></env:Fault></env:Body></env:Envelope>
From Response
2007-05-22 16:41:01.765 WARNING OWS-04052 Bestimmen der Vorgangs-ID aus SOAP-Nachricht nicht m÷glich.
In OC4J (sorry german - means that operation-id couldn't be identified)
Do you have any ideas how I could configure this? Before you try to say: make it manually, I won't, because it have to worked automatically!
Thanks
Frank

Ok I tried it with new Version JAX-WS 2.0.1. There is a new annotation where the type of the Enpoint or WebService itseld can be set:
@BindingType( value=SOAPBinding.SOAP11HTTP_BINDING )
So I tried now with SOAP 1.1 but APEX still don't put the operation name in the SOAP request envelope...
Now do anyone out there have a clue what else could be wrong? Did I maybe forget an annotation parameter somewhere or something else? So I do it something like this:
@Stateless
@WebService( name="XXX" )
@BindingType( value=SOAPBinding.SOAP11HTTP_BINDING )
public class XXXImpl implements Ixxx {
@EJB Ia a;
@EJB Ib b;
@WebMethod( operationName="foo" )
public ADaoObjectWithNoComplexAttributes foo( Long someId ) {
// do it!
return theDao;
I am appreciate for any help!
Thanks
Message was edited by:
promatis

SOAP Runtime Exception: CSoapExceptionTransport : HTTP response contains un

Hi Forum,
I try to configure ADS in our NW04s/XI dev system. I check ADSuser with right
role in ABAP world.
I check ADS connection from SM59 in ABAP World and it is OK.
http://img233.imageshack.us/img233/2110/87011655hv0.gif
I run FP_TEST_00 without success.
http://img233.imageshack.us/img233/2235/81340030ro2.gif
I try to run FP_PDF_TEST_00 report without success:
http://img53.imageshack.us/img53/7919/73002326mz9.gif
When I call from IE http://<my server name>:50100/AdobeDocumentServices/Config
http://img266.imageshack.us/img266/7879/12975780tp7.gif
(is "Service is not published" OK ?)... and I try to test it I receive and error message:
http://img230.imageshack.us/img230/6342/78597745im2.gif
My icm/server_port_0 is 8001 and web server respond OK.
Regards.
Ganimede Dignan.

Thank you for your nice post.
I change ADSuser to "service" so no change password request.
Now FP_PDF_TEST_00 runs well and I can ADS version but FP_TEST_00 returns "ADS: Request start time: Thu Mar 29 17:09:01 CEST 2007(200101)" in the message bar.
In http://<server>:<port>/AdobeDocumentServices/Config retuns:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><rpl:rpDataResponse xmlns:rpl='urn:AdobeDocumentServicesVi'><rpl:Response xmlns:pns='urn:com.adobe'><pns:rpStrings><pns:RpString><pns:name>Error_Level</pns:name><pns:value>0</pns:value></pns:RpString><pns:RpString><pns:name>Results</pns:name><pns:value>
Required stream: "PDFDocument" not found or it is empty.</pns:value></pns:RpString><pns:RpString><pns:name>VersionInfo</pns:name><pns:value>705.20060620101936.310918</pns:value></pns:RpString></pns:rpStrings></rpl:Response></rpl:rpDataResponse></SOAP-ENV:Body></SOAP-ENV:Envelope>
Regards.

XSLT mapping with SOAP Envelope

Hi
I'm trying map SOAP response (with Envelope) to pick two values into the target. Here's the data:
Source (with data):
<?xml version="1.0"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
 <soap:Body>
 <EnumerateResponse xmlns="http://www.approva.net/BizRights/Services">
 <EnumerateResult>
 <TaskID>-1</TaskID>
 <Result>FinishedSuccessfully</Result>
 <StatusInfo/>
 </EnumerateResult>
 <pageObject>
 <startIndex>0</startIndex>
 <pageSize>10</pageSize>
 <totalRows>1</totalRows>
 <moreRecords>false</moreRecords>
 <rowsReturned>1</rowsReturned>
 </pageObject>
 <xmlObjects>(large string of valid data in here)</xmlObjects>
 </EnumerateResponse>
 </soap:Body>
</soap:Envelope>
Target:
Only need Result and xmlObjects into target.
Mapping:
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:template match="/">
 <poll_status_resp_r3>
 <Result>
 <xsl:value-of select="EnumerateResponse/Result"/>
 </Result>
 <xmlObjects>
 <xsl:value-of select="EnumerateResponse/xmlObjects"/>
 </xmlObjects>
 </poll_status_resp_r3>
 </xsl:template>
</xsl:stylesheet>
The values are not getting picked-up into the target.
What am I missing here?
Any help is appreciated.

Hi,
Save the following XSL file as RSpace.xsl
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" indent="no"/>
<xsl:template match="/|comment()|processing-instruction()">
 <xsl:copy>
 <xsl:apply-templates/>
 </xsl:copy>
</xsl:template>
<xsl:template match="*">
 <xsl:element name="{local-name()}">
 <xsl:apply-templates select="@*|node()"/>
 </xsl:element>
</xsl:template>
<xsl:template match="@*">
 <xsl:attribute name="{local-name()}">
 <xsl:value-of select="."/>
 </xsl:attribute>
</xsl:template>
</xsl:stylesheet>
Zip it and import it under Imported Archive.
In the interface mapping click "+" to add one more mapping.
Use this XSL as first mapping and your XSL mapping as the second mapping.
In your XSLT mapping you can use the XPath as
"Envelope/Body/EnumerateResponse/Result".
I mean remove the namespace and use the XPATH.
Thanks,
Prakash

JAVA/ XSLT Mapping to Create a SOAP Envelope

Hello,
I have a File to SOAP scenario and it requires the SOAP message with a custom SOAP envelope. I have searched SDN and could only find that SOAP envelope can be created using a JAVA or XSLT mapping. However, I could not find any blog/ article which will help me understand, with an example, how this is actually coded (creating of a custom SOAP envelope).
Can anyone please point me to a valid blog/ article/ wiki which describes the procedure?
Thanks,
Pankaj.
P.S. Please no spamming of post with links on SOAP Envelope; I have already searched on SDN

Hello,
Here is a wiki using PI 7.1
https://wiki.sdn.sap.com/wiki/display/XI/SampleJAVAMappingcodeusingPI7.1+API
If you want to create a SOAP Envelope, comment out the codes
private static final DynamicConfigurationKey KEY_FILENAME =
 DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String inParam = arg0.getInputParameters().getString("PARAM_IN1");
 getTrace().addInfo("Input Parameter: " +inParam);
 int offset = inData.indexOf(inParam);
 //7. Reader Message ID from Message Header
 InputHeader messageHeader = arg0.getInputHeader();
 String messageId = messageHeader.getMessageId();
 //8. A DynamicConfiguration is a map containing adapter specific message attributes.
 // It associates DynamicConfigurationKeys with string values. The DynamicConfiguration object is obtained using
 // method getDynamicConfiguration()of class com.sap.aii.mapping.api.TransformationInput;
 DynamicConfiguration conf = arg0.getDynamicConfiguration();
 conf.put(KEY_FILENAME, "This Test file is set by JAVA Mapping");
 String outData = "";if(offset > 0){
 int offset1 = inData.indexOf(">", offset);
 String StartString =inData.substring(0,offset1);
 String DocumentNameSpace = " xmlns=\"urn:iso:std:iso:20022:tech:xsd:pain.002.001.02\"";
 String RemainingString = inData.substring(offset1);
lastly, instead of using
outData = StartString + DocumentNameSpace + RemainingString;
replace it with something like this
String outData = "";
outData = "<soap:Envelope xmlns:soap=\"http://www.w3.org/2003/05/soap-envelope\" xmlns:tem=\"http://yournamespace/\"><soap:Header/><soap:Body>"+inData.substring(inData.indexOf("?>")+2)+"</soap:Body></soap:Envelope>";
Hope this helps,
Mark

SOAP Adapter: DO not use soap envelope

Hi Guys
I have a scenario, which calls a webservice from my ABAP Proxies, the twist in this is that SOAP request expects license info into the header of SOAP envelope, I could achive this by XSLT mapping in the receiver SOAP adapter I selected the option "Do not use SOAP envelope" and could do the call.
Due to this the response received from the webservice is treated as payload, as shown below...
response message payload:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Header xmlns="http://schemas.xmlsoap.org/soap/envelope/">
 <SubscriptionInfo xmlns="http://ws.strikeiron.com">
 <LicenseStatusCode>0</LicenseStatusCode>
 <LicenseStatus>Valid license key</LicenseStatus>
 <LicenseActionCode>0</LicenseActionCode>
 <LicenseAction>Decremented hit count</LicenseAction>
 <RemainingHits>18</RemainingHits>
 <Amount>0</Amount>
 </SubscriptionInfo>
</Header>
<soap:Body>
 <getRateResponse xmlns="CurrencyRates">
 <getRateResult>44.945</getRateResult>
 </getRateResponse>
</soap:Body>
</soap:Envelope>
and when i am trying to do the response mapping, it is not able to read the value.
Anyone having any idea, on how we could do this.
Thanks
Dheeraj

Hi
I am sorry for replying in so late, was busy with some projects.
I got few mails and this post is cathing up again, so thought of giving the solution I followed without any adapter module or anything, simple plain XSLT mapping.
Integration Repository
1. Created data type and message type for Outbound Interface
2. Imported the WSDL
3. Created an XSD out of the sample response I got by calling the WSDL (this you can do from any tool available, i used the strikeiron website), pls refer below to see the XSD below, and you will have to use the message type envelope from it.
4. Most Important step, created 2 XSLT mappings, one for request and the other for response., Pls refer below for both these mappings.
5. did the interface mapping
Integration Directory
1. pls configure your scenario as normaly you do, and while you configure the communication channel for your soap receiver, make sure you click on the do not use soap envelop option.
thats it done.
XSLT Request Mapping
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:template match="/">
 <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP-ENV:Header>
 <LicenseInfo xmlns="http://ws.strikeiron.com">
 <RegisteredUser>
 <UserID>xyz</UserID>
 <Password>xyz</Password>
 </RegisteredUser>
 </LicenseInfo>
 </SOAP-ENV:Header>
 <SOAP-ENV:Body>
 <getConversion xmlns="CurrencyRates">
 <FromCurrencyCode>
 <xsl:value-of select="//fromCurrency"/>
 </FromCurrencyCode>
 <ToCurrencyCode>
 <xsl:value-of select="//ToCurrency"/>
 </ToCurrencyCode>
 <Amount>1</Amount>
 </getConversion>
 </SOAP-ENV:Body>
 </SOAP-ENV:Envelope>
 </xsl:template>
</xsl:stylesheet>
XSLT Response Mapping
<?xml version='1.0' ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:a="CurrencyRates" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
 <xsl:template match="/">
 <ns0:MT_Cur_res xmlns:ns0="http://www.april.in/WebService/SOAPHeader">
 <Rate>
 <xsl:value-of select="soap:Envelope/soap:Body/a:getConversionResponse/a:getConversionResult"/>
 </Rate>
 </ns0:MT_Cur_res>
 </xsl:template>
</xsl:stylesheet>
Webservice Response XSD
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" targetNamespace="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://ws.strikeiron.com" xmlns:ns2="CurrencyRates">
<xs:import namespace="CurrencyRates" schemaLocation="ns2.xsd"/>
<xs:import namespace="http://ws.strikeiron.com" schemaLocation="ns1.xsd"/>
<xs:element name="Envelope">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="soap:Header"/>
 <xs:element ref="soap:Body"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
<xs:element name="Header">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="ns1:SubscriptionInfo"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
<xs:element name="Body">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="ns2:getConversionResponse"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
</xs:schema>
let me know in case somebody gets stuck somewhere for this scenario.
Take Care
Dheeraj

Do not use SOAP envelope

I have a scenario in which a Webservice is called from PI; as the webservice request some specific fields in the SOAP-header I have found that I should check the "Do not use SOAP envelope" option in the SOAP-receiver channel.
I have searched the forum/SDN for examples of how to create the SOAP envelope including the required header fields. I have found some posts refering to XSLT-mapping; however I'm not famliar with XSLT so I'm looking for an example or guide how to create the SOAP envelope for this scenario.
Can anybody be of assistance?
Kind regards,
John.

Here is a sample of an xlst I used for this purpose.
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Header/>
<soapenv:Body>
 <p262:operationName xmlns:p262="http://othersite.com">
 <xsl:apply-templates/>
 </p262:operationName>
</soapenv:Body>
</soapenv:Envelope>
</xsl:template>
<xsl:template match="shippingOptions">
 <shippingOptions>
 <xsl:apply-templates select="destination" />
 <equipmentId><xsl:value-of select="equipmentId"/></equipmentId>
 <xsl:apply-templates select="origin" />
 </shippingOptions>
</xsl:template>
<xsl:template match="destination">
 <destination>
 <countryCode><xsl:value-of select="countryCode"/></countryCode>
 <postalCode><xsl:value-of select="postalCode"/></postalCode>
 </destination>
</xsl:template>
<xsl:template match="origin">
 <origin>
 <countryCode><xsl:value-of select="countryCode"/></countryCode>
 <postalCode><xsl:value-of select="postalCode"/></postalCode>
 </origin>
</xsl:template>
</xsl:stylesheet>

No SOAP Envelope but 1 {'}Values; HTTP 200 OK

Similar Messages

Maybe you are looking for