No sound on wireless connection from itunes to airport express

Just configured a new AX to Linksys WRT54GSV4 using WDSremote, got a solid green light, airport's setup and admin programs v4.2 both see AX with linksys IP from DHCP. When playing itunes v6.0.1.3 I have a speaker choice of My Computer or Airport Express. to AX keeps saying connecting to "Airport Express" at the top and then the song progress bar shows but doesnt move as well as no audio. Audio does work on My Computer and to AX if I connect using the ethernet jack. Why no wireless audio?

Just configured a new AX to Linksys WRT54GSV4 using WDSremote, got a solid green light, airport's setup and admin programs v4.2 both see AX with linksys IP from DHCP. When playing itunes v6.0.1.3 I have a speaker choice of My Computer or Airport Express. to AX keeps saying connecting to "Airport Express" at the top and then the song progress bar shows but doesnt move as well as no audio. Audio does work on My Computer and to AX if I connect using the ethernet jack. Why no wireless audio?

Similar Messages

  • AirPlay from iTunes to AirPort Express not working

    AirPort is connected with my network and fully working. I also set up AppleTV, which also is fully working and can mirror both my computer and iPhone. In order to play music from iTunes on my Macbook Pro (which is also connected to the network), I clicked the AirPlay button and received the following message: "An unknown error (-15006)occurred while connecting to the AirPlay device 'AirPort Express'". How do I get my iTunes on my MacBook Pro to connect?

    I finally resolved this myself. It was somehow "stuck" on a playlist. I could not stream from the main library, but once I tried to stream from that particular playlist - the whole thing started working again. Now I can stream from the main library and other playlists. A very strange quirk. I did rent a movie in iTunes last night for the first time and I had been streaming from that playlist prior to starting the rental movie - and I think somehow it must have gotten "stuck." Hopefully it is a bug no one else experiences because it wasted an hour of my time today.

  • Streaming from iTunes to AirPort Express interrupted with good conectivity

    I connect from my iMac to a radio in the kitchen via AirPort Express. The stream from iTunes is interrupted ever so often and the second speaker in AirPlay is dimmed. The connection to the AirPort Express remains excellent throughout. Restarting helps, but then it tends to happen again. Sometimes after an interruption it starts working again. I did not notice any specific timing or other activity on my iMac that could cause this.
    Any ideas?
    Detlef

    besides changing the radio channel used, also try this:
    open system preferences
    open network pane
    select airport in the left list
    click the advanced button
    go to the TCP/IP tab
    set the configure IPv6 field to OFF.
    click OK
    click apply
    now try again to connect to your remote speakers.

  • HT4437 Streaming music from iTune to Airport Express

    In order to stream music from iTunes (Windows Desktop) to AirPort Express, do both have to be connected via WiFi network? What if both are connected via same wired network.
    My iTunes cannot see AirPort Express connected to the same network.
    thanks,

    Airport utility installed on my PC (Win Vista) cannot detect AA. It communicates only when I enter the IP address of AA. After that I have configured the AA in Bridge mode. AA has wired connection with Linksys Router.PC is connected with the same router.
    iPod Touch can easily detect AA and can stream music to it too.

  • Intermittent issue streaming music from iTunes to airport express

    I'm experiencing an issue when streaming music from my iMac to two airport expresses (1st generation). Music will be playing fine but once in a great while, when a new song starts it's like a digital bomb has gone off. It's similar to an amber alert coming through the speakers instead of music. When I stop the song and start it again, back comes the music. This has happened to many different song files so I've discounted the possibility that it's a corrupted file. I've not been able to determine any other pattern that would give me some insight into the root of the problem. The problem has existed across two different routers so doubtful that’s a factor either. All my software (iTunes and OS) are up to date and generally the system works well. Is anyone else experiencing this? Any solutions or advice? I’m at a loss on how to resolve.

    Update: this problem exists when just listening to music on iMac with iTues; no airport express or network involved. Something, somewhere in the software is causing this.

  • Can't connect from iphone to airport express

    Plugged airport express into wall outlet. Blinking yellow light. Tried to connect to airport express through iphone. Iphone says "cannot be set up by this"

    If it's an older 802.11b/g router you can't use the AirPort Utility on iPhone to configure it. Use the AirPort utility for Mac or Windows. You have many more configuration options using the desktop software as well. The utility on the iPhone is very basic.
    Mac v5.6: http://support.apple.com/kb/DL1482
    Windows v5.5.3: http://support.apple.com/kb/DL1391

  • Can't stream music from iPhone to airport express when connected to internet

    I have an issue with my airport express. When the unit is used solely for streaming music from my IPhone to connected stereo speakers without an Ethernet cable attached it works fine.  When I attach an Ethernet cable to the airport express and connect to the Internet on my iPhone, the airport express will no longer stream music from the iPhone. This is a recent problem, previously I was able to access the Internet on my iPhone from the airport express, whilst simultaneously streaming music from the iPhone back to the airport express.

    Do you mean Lan cable? Can this be done wirelessly from itunes to airport express without the internet connections?  I can't connect to an airport express that's not connected to the internet.

  • Can i transmit music from iphone to airport express without being connected to internet?

    can i transmit music from iphone to airport express without being connected to internet? just from phone to express via local network or whatever it's called.

    Do you mean Lan cable? Can this be done wirelessly from itunes to airport express without the internet connections?  I can't connect to an airport express that's not connected to the internet.

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

    Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

    Is there a way to turn the wireless capabilities off on an AirPort Express?  I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
    It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
    If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
    For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
    In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
    Please check out the following AirPort User Tip for details on optimal base station placement.

  • I told my wireless network to forget two airport expresses so that I could rename them.  Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station.  Does "forget" mean forever?  How to reset?

    I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them.  Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station.  The network does recognize a totally new 2nd gen express.  Does "forget" mean forever?  How to reset?

    The network does recognize a totally new 2nd gen express.
    Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
    Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
    Assign a simple name.....something like     2ndGenExpress

  • Cannot Connect To External Speakers Through iTunes 10 & AirPort Express

    I am trying to play music through my stereo from iTunes 10 and my AirPort Express. IMy Mac & AirPort Express are on the same network and the speakers are connected correctly to the Airport Express. I don't see the AirPlay button in the bottom right corner of iTunes though. Any thoughts?

    i'm having the same problem, there used to be an icon in the lower right hand corner to connect to my airport express and it doesn't exist anymore, i tried shutting down, unplugging and plugging the airport express back in, but i still have no option to send music to it. any luck with yours?

  • HT1515 My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    Wirelessly
    Just select the option to make your AirPort Express join an existing network in the setup process

  • Can I extend my network by connecting one of my airport express devices to my airport extreme via an ethernet cable? I have CAT5 cable throughout my house but have a wireless network w/ 3 airport expresses

    Can I extend my wireless network by connecting one of my airport express devices to my airport extreme via an ethernet cable?  I have a wireless network with 3 airport expresses and 1 airport extreme functioning as the base station. I have CAT5 throughout my house.

    Welcome to the discussions, mib88!
    Can I extend the network a second time with another Airport Express...
    The short answer would be no. If you want more details, please continue to the next paragraph.
    Apple's "extend a wireless network" works just like the hub and spokes of a wheel. Your main hub is either the Time Capsule or the AirPort Extreme and the AirPort Express is at the end of a spoke. You can add more devices at the ends of other spokes, but these devices will communicate directly to the hub, not to another device at the end of a spoke.
    Apple does offer an option which is is known as a "static WDS", which can consist of a "main", "relay" and "remote" device. The problem here is that this type of setup has two huge drawbacks:
    1) All of your faster "n" devices will drop down to much slower "g" speeds
    2) The bandwidth or speed capability on the network will drop down to only 25% of the original bandwidth with a "main", "relay" and "remote" on the network.
    Don't think you want this on your network. Your best option is to connect the new AirPort Express to the "hub" using an ethernet connection. If you can't run the ethernet cable, take a look at a pair of ethernet powerline adapters to accomplish the same task by sending the ethernet signal over the AC powerline in your home.

  • Hello, I have Iphone 5 with Itunes music, airport express, 2 stereo speakers. What else do I need to hear music on the speakers?

    Hello, I have Iphone 5 with Itunes music, airport express, 2 stereo speakers. What else do I need to hear music on the speakers?

    Hello ricsch,
    It sounds like you want to setup your Airport Express to Airplay music from your iPhone 5.  I found an article with steps to help you get this setup:
    Connecting to an existing Wi-Fi network, exclusively for iTunes music
    AirPort Express used exclusively for AirPlay by setting it up in Client Mode.
    Choose this configuration if the computer containing your iTunes library may be out of direct range of the AirPort Express, but is within range of the Wi-Fi network.
    How to Set It Up
    Connect your AirPort Express to your home stereo or powered speakers.
    From your computer, join the wireless network. Use the AirPort status menu in the menu bar on a Mac. On a Windows-based computer, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. Enter the network password, if necessary.
    Open iTunes on your computer and choose the AirPort Express(es) you wish to stream music through from the speakers pop-up menu in the lower-right corner of the iTunes window.
    I also recommend reviewing the sections titled "Some things you should know about AirPort Express with AirPlay" and "Things to consider before you begin" in the full article:
    Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes
    http://support.apple.com/kb/ht4587
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Problem transferring video from laptop to Z1

    Hello, A couple of days ago i installed sony pc companion and media go. I transferred a video up to 2gb from my laptop to Z1 in about 5 minutes... Now there was a new update from Media Go i think 2.5..and everything is transferring very slow...transf

  • Storing Compilation errors in a File or String

    import com.sun.tools.javac.Main; String Args[] = { "-classpath", ".;C:/j2sdk1.4.2_05/bin;", "-nowarn", fileName}; I am using the command Main.compile(Args); to compile a Java File. It will return 0, if the file is compiled without errors. If errors e

  • Capture the Node clicked / selected in Toplevel navigation

    HI How to capture the node that is clicked by user  in the generated toplevel navigation from the taglib. I need to pass the TAB/MENU name selected by user to another JSP using session or request object. <nav:iterateInitialNavNodes>        <li class=

  • Getting the count of DISTINCT of several columns

    How can i get the count of DISTINCT of several columns? SQL> select count(distinct ename) from emp; COUNT(DISTINCTENAME)                   14 SQL> select count(distinct ename, job) from emp; select count(distinct ename, job) from emp ERROR at line 1:

  • USER EXIT PA for change material code

    Hi, I am looking for an user-exit for PA. In some cases, when we create a Post Document we need to change the material code, only in PA, not in FI. I have been looking for an user-exit to solve this question, but I find nothing. Do you know an user e