No status assigned to version 0 in FM area MFMA . Message No FMCU
Hi Gurus,
Have been doing the setting of Fund management / Budget. Need advice for 3 issues in this regard.
Issue No. 1 - Is it possible to create period-wise budget in ECC 6.00 ?
Issue No 2 : I selected the standard version of 0 in "OF21" - Define Budget Version.
But, i am not able to assign it with " Set Activation Procedure for Budget version"
Issue No. 3 : I tried to create a budget values in "FMBBC" - Public Sector management > Fund Management > Budgeting > Entry Documents > Create. But system throws a following error.
No status assigned to version 0 in FM area MFMA
Message no. FMCU006
Diagnosis
You want to use version 0 in FM area MFMA but there is no status assigned to version 0 in FM area MFMA.
Procedure
If you want to use this version with this FM area, please maintain the settings under Assignment of Status.
You can also select another version for budgeting in this FM area instead.
Kindly advise me how to rectify all these 3 issues ?
Thanks in advance,
Devi Aparna
Hi,
For period-based budget you can have a work-around, though as from ECC 6.04, you have even specially dedicated object for this: Budget Period.
Regards,
Eli
P.S. Please, respect the rules and don't ask more then one question per thread. Also, try to avoid asking basic questions and search SDN before posting
Similar Messages
-
Define status to version 0 in FM Area
Dear FI Expert,
I want to entry document via FMBBC (budgeting workbench), after i entry version 0 and press enter, it showed error :
No status assigned to version 0 in FM area BSW1
Message no. FMCU006
Diagnosis
You want to use version 0 in FM area BSW1 but there is no status assigned to version 0 in FM area BSW1.
Procedure
If you want to use this version with this FM area, please maintain the settings under Assignment of Status.
You can also select another version for budgeting in this FM area instead.
I click Assignment of Status (tcode FMBOSTAT),but I can't choose one of status, how to maintan the status?
Thank you.Dear Atif,
I have choosen FMBOSTAT, when I click F4 ini Status column, I can't find anything... So, how to maintain the Status so that I can choose one of the Status? -
MONI Message Status as Log Version
Hi Guys,
In MONI few of messages getting status as Log Version..Could any one plesae let me know why ? and what is best way of solution for this...
Thanks,
Siva...It is the processing instance of the mesg. If you restart the mesg for failure reason, it will version until execute successfully with version numbers.
Refer this link if you have problem in the proxy side
Log version in sxmb_moni in recever system (soap to proxy scenario) -
Shop Floor Statuses - Assign Shop Floor Statuses - Component Pick Release
Hi,
is there someone who knows the use of the following forms in WIP module:
- Shop Floor Statuses
- Assign Shop Floor Statuses
- Component Pick Release
We are in 11.5.10
Please provide also an example of a business scenario where this functionality could be used.
Thanks in advance
Regards
Riccardohi,
shop floor statuses are created which will allow/disallow moves and assigned to particular operations in the job.
they are normally used in OSP operations to control the movement of material thru intraoperation by the users when the material is gone for OSP.
and they can also be used to hold the job when its moving in operations (may be due to quality problems etc..)
Component pick release is used to issue the required components to a particular job based on pick slip report.
its another way of issueing material to wip apart from backflushing thru wip material transaction form.
hope that u can hav idea abt these.
if u need any clarifications, ols reply -
Subcontracting Challan printing after reconciliation (status assigned)
Hi,
My requirement is to reprint the subcontracting challan after reconciliation (status assigned).
To reprint the challan we use the tcode j1if11 and tick print immediately. Spool is generated and we are taking printout.
But since the challan is reconciled system is not allowing to enter in tcode j1if11.
Please suggest how to get print in this case.
RegardsHi,
Thanks for the reply.
But this is business requirement in case if the challan need to be resend to vendor if the original copy is lost or business reporting is reqd or any other case.
Please suggest.................. -
Assign the line IDs for CO area 1000 version 0 RA key 000002
Assign the line IDs for CO area 1000 version 0 RA key 000002
Message no. KJ207
Diagnosis
You are attempting to perform WIP calculation or results analysis with results analysis version 0. However, the assignment of cost elements for the order or project to line IDs has not yet been defined for this results analysis key. controlling area 1000.Can you tell me the T-code from which you are getting this error.
-
The version of GroupWise you are using cannot access this post office
I built a new Server and added it to my PCSD Tree. The new server name is
GroupWise and has an IP Address of 10.10.0.13.
I followed the GroupWise 7 Installation Guide and installed GroupWise to
this server. At no point did I find any place to enter the GroupWise
License.
During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
However the larger problem is this: I can not login to the GroupWise
Server. Below are two screen shots of what I’m getting when I
launch the GroupWise 7 Client. When I look at the .NLM loaded on the
Server for GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
On the Client, when I launch GroupWise, The Novell GroupWise Startup has a
message in the message window “The version of GroupWise you are
using cannot access this post office”. Then after clicking OK three
times, the following message appears on the screen “GroupWise did
not initialize successfully, Please run GroupWise Setup, or contact your
system administrator. Unspecified error OLE Error 80004005*During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
**You need to disassociate these four NDS users from any GW attributes.
Right-click each user in C1, GroupWise Utilities->GW / eDirectory
Association->Disassociate GroupWise Attributes.
*** When I do as instructed I get the following error:
[username] is missing the following attribute: NGW: Post Office
~~~~~~~~~~~~~~~~~~~~~~~~
*GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
**If the post office is closed, you need to determine why this is. On the
MTA, hit F10, Configuration Status, highlight your PO and hit enter,
select details, then look at the last closure reason.
*** Last Closure Reason= Missing or incomplete address information
[ When I installed GroupWise, I wanted all the e-mail to be stored on the
EMAIL Volume. During the install, I Changed the Install Directory to
\Groupwiseemail. After the install I have two directories in this volume.
One called DOMAIN and the other called PCAM (PCAM is name of my domain).
~~~~~~~~~~~~~~~~~~~~~~~~
*On the Client, when I launch GroupWise, The Novell GroupWise Startup has
a message in the message window 'The version of GroupWise you are
using cannot access this post office'.
**What version of GroupWise is on the server and what version client are
you
using? Also, if you pull up the properties of both the domain and post
office in C1 what is the database version listed as?
*** I installed GroupWise 7 both Server and Client. I'm thinking this is
due to the Post Office being closed. I only have 1 Post Office.
Thank You;
Lewis -
Set a User Status for Quality Notifications only if they are "Activated".
Hello experts:
I need to be able to set a User Status for Quality Notifications only if they are "Activated".
When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification". Initially, the only difference between the inactive "Defect Notification" and the active "Quality Notification" is that the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
I checked the business rules for status DEFR and found that the following processes clear this status
PMM1 - Postpone Notification
PMM2 - Put Notification In Process
PMM3 - Assign Order
PMM6 - Put Notification In Process Again
Any Ideas ?Perhaps some additional information would help you understand what I need to do.
For notification type F3, we are recording all defects found in production.
Most of these are expected defects that result in a minor reduction in yield.
For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
When this happens we manually activate the notification and assign tasks to find and correct the cause.
It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing. I therefore want to use the Activation event as the trigger to set my user status. -
I deleted my iMovie from computer and from my purchases list in AppStroe. When I'm trying to download it again from App Store a pop up window comes up and says: "These apps were already assigned to your Apple ID and are available in your Purchases list". Please help me to reinstall it.
If new versions of iPhoto and the other iLife applications (iMovie and GarageBand) were purchased by the previous owner from the Mac App Store, then they will be locked to the previous owner's Apple ID and cannot be transferred to you. You will have to re-purchase them under your own Apple ID.
If this is an older MBA that came with Snow Leopard or an earlier version of Mac OS X, though, the system would have come with an installation disk that included the iLife applications, a disk which the seller should have provided to you. Those iLife applications would be older versions, of course, and may or may not work in Lion depending on how old they are.
Regards. -
I updated and now i can't use the itunes. I have unistalled several times, installing newer and older versions but still i get this message. Is there anything i can do to fix this problem??
Try the following user tip with that one:
Empty/corrupt iTunes library after upgrade/crash -
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
I have a SharePoint site which I am trying to open in SPD 2010, I am getting the following error(some of my team members are able to open)
The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.
These are the ways I tried
1) Earlier I have MS office 32 bit and SPD 32 bit, I uninstalled them and installed both 64 bit versions
2) I uninstalled restarted my machine and installed it again still no use.
3) I installed SPD 2010 Service Pack 2 of 64 bit
4) I uninstalled the SPD 2010 and opened the site—site actions—edit page in SPD , then it asked me to install SPD 2010, then I installed and tried to open the same site, again same error.
How to solve this issue?
I checked permissions also at that site level – I have full control like others. I don’t have access to Central Admin so where else I can check the permission settings?Please update us SharePoint version
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful. -
can't update new version of itunes due to error message saying invalid si
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Not applicable.
The only versions you update to are 3.6.28 (which will be dropped from support in a few weeks) or Firefox 11. I'd recommend either 11, or at least start planning for it. Is there a specific reason you don't want to upgrade to 11, I can try to help.
-
I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me
Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
Maybe you are looking for
-
HT204135 how do i set my macbook air to only print in black and white
How do I set my MacBook air (mountain lion) to only print in black and white?
-
Bridge CS6 Photoshop Batch tool to open Photoshop CC
I have both CS6 and CC installed I'm having the issue in Bridge CS6 that when I want to do a batch function through Tool > Photoshop > Batch this opens Photoshop CS6 and not Photoshop CC which i'd prefer it open. Is there any way to set this. The que
-
Publishing Problems with Adobe Presenter 9
I downloaded the free trial of Adobe Presenter 9 and created a video/Powerpoint presentation. However, when I went to "Publish" (to YouTube), it stalled at 5%. Did I just waste many hours that I really don't want to do again? It's an hour long pre
-
How to get the phase of signal from osilloscope?
Hellow! Anyone can tell me how to get the phase of a signal from an osilloscope? thanks!
-
Is there any spyware out there for the mac?
Been looking at spyware to monitor teenager's activities on the iphone 5. Seems they all want Jailbreak installed, but I understand that ruins the warranty on the phone. I don't want to do that, or anything illegal. But, we do need to monitor his act