No sund after a turn off because low bat

Hi its me again.... T.T
This is the second time with this issue, my lap was with a low bat and I didn't see, so it turned off (like all the normal laptps) and then i turned on and the audio is missed, i instaled the audio controler and nothing happened, what's going on? the first time i dont know how i fixed it, but i did a super mess with all the drivers. please help again...
info:
Windows Vista HomePremium 64x (i hate it, i have a lot of issues because the vista u_u)
Satellite A505-SP6996R this is a latinamerican model or sort of, so Jerry told me that i can use the drivers for this model
Satellite A505-S6973
Thnks guys

STEAMER123 wrote:
Found the problem(S)
Like people on the other website, the issue is the copper piece on the batteryis not contacting with the phone. That's why the battery icon shows only when its plugged in and nothing at all when its not plugged in. All the complaints I read on the internet has just one problem. It just happens I got two on this phone.........
1) I had to use a tiny needle to bend the copper piece out to ensure its making contact with the phone
2) after I bent the copper piece, the battery is still not contacting right, (you can't really tell by looking at it, I was just trying everything people were saying on the web. I spent hours on it and I got it !!!) I had to cut a business card to slide it underneath the battery. (2 business card thick). If u have same problem, u should try one card thick first.
Now the back cover feels like its swelling cuz of the business cards, but comparing to a $600+ phone, this $99 phone I can do everything I need it to, I can deal with that. Just wish I could have found the problem(s) sooner.
Hope this will help people with the same problem
Hey, this really helps, after looking for arkane solutions, I just add a piece of bend paper under the batery and it works... notice something,, the batery used to hace a plastic strip por pulling out.. this plastic strip got unglued so i removed, i see this plastic strip thinkness is needed for the wire copper piece to make contact... terrible design.
thanks for the advice.

Similar Messages

I forget to charge my MacBook Pro and it turns off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. Sometimes pulling the Battery out fixes it

I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8

I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8

Im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I just got my battery and iphone 4 screen fixed and when it turned off because there weren't any battery left, I tried charging it. Now it won't turn on or charge... what do i do?

I just got my battery and iphone 4 screen fixed and when it turned off because there weren't any battery left, I tried charging it. After charging it for like thirty minutes, I pressed the home & lock button and it turned on for a moment for me to see that it was only at 1%... So basically it wasn't charging for that entire half hour. Then, I tried connecting it to my computer and nothing is popping up... so it won't turn on or charge... what do i do?

Who repaired the phone? I suggest taking it back to this repair facility. Since Apple replaces phones instead of repair, the repair facility would be the one to take care of your problem.

Iphone 5 keeps restarting and turns off under 20% bat no fix from apple after iOS 7

Iphone 5 keeps restarting and turns off under 20% bat no fix from apple after iOS 7.
People keep having this problem as I keep seeing and also seeing apple doing nothing to help there consumers.
Anyone one know how to fix this problem because apple don't!
Come on apple! A fix!!!!!

I am having the same issues. I feel that I have to carry around a charger because it either dies so fast, or turns off when it's not completely dead or restarts.

Hi i have a proplem.yesterday i was playing on my ipad while charging it and then it turned off because the charge ended then i slept and kept in the charger all night ...when i woke up i found it still turned off now it keeps show logo then turn of.

yesterday i was playing on my ipad while putting it in charger and then it turned off because the charge ended..then i left it chargingall night long and when i woke up i found my ipad doing this it keeps showing the logo then displays the lock screen and very fast it show circle with points moving then it shuts down and displays the battery empty but charging...it keeps doing this non stop how to open my ipad again !! Help!!sorry for very bad english

First try a reset, by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.
If that fails, you can try restoring the iPad using Recovery Mode.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

Lost applications after PDA turn off

Hello everyone.
I’m developing an application for TPC-2006 with LV8 and PDA 8 module. I have deployed the application into the device and works fine, however after a turn off the application is deleted from the device. Anyone knows how can I store the application in a non-volatile memory zone? The TPC-2006 has no memory card.
Thanks

The TPC 2006 has, according to its data sheet, 64 MB SDRAM, 64 MB flash memory onboard, and a CompactFlash memory expansion slot. To me, means that it should behave like other PDAs. I thought I had a similar problem during the first hour of utilisation of my iPaq... until I discovered that the files where saved in the Document folder, while I was searching the Application folder... .
This being said, the TPC 2006 is a National Instrument product and you should obtain a better help from NI engineers !
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

27Xi stays on displaying "no source signal" after I turn off my PC or PS4, doesn't enter sleep mode.

I started having this issue a few weeks ago. The monitor no longer enters sleep mode for whatever reason after I turn off my devices connected to it (currently my PC via DVI and my PS4 via HDMI), it turns on and displays a box with "no source signal" and never goes to sleep. Before it displayed a box with "monitor going to sleep" for a few seconds and the panel turned off as the montor entered sleep mode. This is extremely annoying. How do I fix it? What's wrong with it? I already tried a factory reset.

Hello, try this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Now wifi will not turn back on automatically in the morning after being turned off all night. Use to be ok before now. Is it the new update 7.1? Help

Wifi will not turn back on in the morning after being turned off all night, it use to work for years. Is it the new 7.1 ?

Yes that what I mean, after the phone has been turned off all night, when I turn it back on the morning the wifi will not turn on by itself. Eventually by turning off and on the main phone switch and the wifi in settings it sometimes come back on! Then I'm ok for the rest of the day even when I leave the house and come back it's ok. Only first thing in the morning, strange that it doesn't wake up like it use too.
Thank you

Satellite T130 - Turns off because of low power

My 130 just turns itself off without warning because of low power but it shows between 40 and 50% power remaining bfore it turns off. What is wrong with it?
Also there is no warning about low power, it just turns off. Any ideas?

hi c3po thanks for your reply. Yes i am using the supplied adaptor, i've only had the laptop a few days. no i haven't checked for a bios update, i'll do that. I had the laptop on for nearly 4 hours before it turned off, and it was showing 3 hours or so remaining, it's quite strange, maybe i should ring toshiba?

My external hard drive stays on even after I turn off my iMac. Why?

New 24” iMac (see below)
I have connected my 800 Firewire LaCie 500 Gigabyte external hard drive and it works fine. However, it doesn't turn off after I have turned off my iMac! I used Tiger before this and the very same LaCie external drive always turned off (its blue light would go off).
I am sure that my iMac is Off and is not actually still On.
Please advise, because I am not sure what could happen to my LaCie hard drive if it stays on constantly.
As for the iMac, since the instructions mention turning if off, I figure that turning it off is not harmful. Various people at the Apple Store have told me that keeping the iMac on 24 hours a day is not detrimental to the machine but I am old fashioned, I guess...... with that old fashioned paranoia about letting machines stay on all day. If I am wrong, please tell me.
~ Lorna in Southern California

Dear Dennis at LaCie support: Thank you so much for your reply. I did what you said and did indeed discover that when I unplug the LaCie 500 gig hard drive from my iMac, the hard drive turns off, which proves that there is powering still sent through the FireWire bus. It did not turn off with Tiger on my older iMac (the round white semi-circular base iMac).
BTW: I also have a LaCie 125 gig external hard drive bought several years ago. I am assuming that it has a FireWire which is rated at that 400 rather than the 800 that my 500 gig hd has. Am I right? If yes, then I will look for the cord that matches that hd. I hope that LaCie prints the number on the cord because if not, I will have a hard time.
I do see that on the new 24“ Intel iMac, the 800 port is the one farthest to the right in the back of the iMac, and the 400 port is to the left of it.
Wish me luck. I still have to figure out how I will use the 125 gig. I am now using the 500 gig for the Time Machine backups and the .Mac Backup. Also, other of the usual.
Thank you again,, Dennis. Makes me glad I bought La Cie hard drives.
I hope that the smaller one doesn't fritz up on me, since I bought it several years ago.
~ Lorna in Southern California

Lumia 521 battery indicator after a turn off

hi
i got a nokia lumia 521 a month ago , today i was with costumer support " t-mobile" and they asked me to turn of the phone pull the battery and take the sim card out , so i did , then they asked me to put everything back and turn it on so i did. but..... the phone didnt come up , by hitting / holding the power button , so i thought maybe my battery was very low when i turned it off , so i plugged my usb charger to the phone , now the phone does the following
when i plug the usb to the phone , the phone vibrates then goes to NOKIA then straight to the battery indicator with little red and a flashing on/off charging indicator , when i unplug the usb cable the phone turn off.
is there a trick to fix that ?
thanks

STEAMER123 wrote:
Found the problem(S)
Like people on the other website, the issue is the copper piece on the batteryis not contacting with the phone. That's why the battery icon shows only when its plugged in and nothing at all when its not plugged in. All the complaints I read on the internet has just one problem. It just happens I got two on this phone.........
1) I had to use a tiny needle to bend the copper piece out to ensure its making contact with the phone
2) after I bent the copper piece, the battery is still not contacting right, (you can't really tell by looking at it, I was just trying everything people were saying on the web. I spent hours on it and I got it !!!) I had to cut a business card to slide it underneath the battery. (2 business card thick). If u have same problem, u should try one card thick first.
Now the back cover feels like its swelling cuz of the business cards, but comparing to a $600+ phone, this $99 phone I can do everything I need it to, I can deal with that. Just wish I could have found the problem(s) sooner.
Hope this will help people with the same problem
Hey, this really helps, after looking for arkane solutions, I just add a piece of bend paper under the batery and it works... notice something,, the batery used to hace a plastic strip por pulling out.. this plastic strip got unglued so i removed, i see this plastic strip thinkness is needed for the wire copper piece to make contact... terrible design.
thanks for the advice.

PLZ Help. PC won't turn off because of EAX Mod

Help! Ever since i installed my X-Fi Fatalty, when I go to turn my computer off, it says now ending EAXModule. After that, the computer won't turn off, but I can't do anything because it says the window station is shutting down. It is very annoying because all my settings aren't saved and I have to turn the computer off manually.
My system:
Athlon 64 4000+ OCed to 2.64 GHz
Asus A8N32-SLI Deluxe
2GB Kingston Hyper X
2 MSI 7900GT's in SLI
50GB Western Digital Raptor
Creative X-Fi Fatalty
Antec 550 Watt PSU

I'm also having a similar problem now, however, if I wait a minute or two the system does shut down. I'm using an ASUS M2N32 WS Professional board, with the my X-Fi Platinum card in the second PCI-X slot; I couldn't get it to work at all in the board's one PCI slot, and the first PCI-X slot has my RAID card in it (Areca ARC-0). My GeForce 7900 GTX is in the second PCI-E slot, since it's too big to fit in the first and leave room for the RAID card.
For all that, the sound card, video, everything seems to work perfectly except for this problem with the EAX module at shutdown. It's very annoying. I've tried stopping CTDetect from running at startup, I've tried completing the registration. Nothing seems to work, but I want my Creative applications. Any ideas?

Zen Mirco Formated and fully charged STILL goes flat after being turned off all nigh

This is starting to annoy me now, I formated the unit and then allowed it to be fully charged, now in the morning when I awoke after leaving it off all night it was completely flat again. So this rules out corrupt files in the library.
And from all the other things I have done I have ruled everything else out, so come on creative!
Whats going on?

It's strange that the Zen Micro does it but the Zen Touch doesn't. It could be because of the massi've battery life in the Zen Touch but I charged my Zen Touch up completely about 2 days ago and turned it on today and it's still showing 3 bars. I really hope they remedy this problem because it's a bit annoying taking it with me in the morning only to have the battery die later that day.

HOW DO I TURN OFF THE LOW INK WARNING ON MY OFFICEJET 7500A

Hi everyone
I have a officejet 7500 all in one printer which is a couple of years old now. I have a ciss system on the printer due to the amount of printing i am now trying to do, however i am now having the really annoying problem of the low ink level pop ups keep on showing. Can any of you wonderful people help me and tell me if these pop ups be turned off. I have Windows 8.1. Please Please help
Cheers
Clive

There should be a option in the printer software to turn off the ink warnings, you can customize the settings yourself in there. I think it's printer maintence.

No sund after a turn off because low bat

Similar Messages

Maybe you are looking for