No Unpaid Tax Line Items exist for the Documents

Hi SAP Guru's
I am facing a Problem while creating Challan throgh T code "j1inchln", it is not Picking up the documents posted throgh T Code "MIRO", Where are same transaction if we post throgh FB60, it is Picking up and generating Challan for the dcuments.
we are working on ECC 5.0
Kindly advice at the earliest possible.
Regards
B.Praveen Kumar Reddy

Hi Sai Krishna Vallurupalli
Thanks for the reply, but we have updates the Business area & section Code in the MIRO, as it will not allow us to go furthur if we do not update the Business Place & Section Code. if there is any OSS Note  related to this Error.
Kindly let me Know.
Thanks & Regards
B.Praveen Kumar

Similar Messages

  • How to upload the line item data for the T-CODE CO12 by using LSMW

    Hi ALL
    i have to upload some data using the t-code CO12 by LSMW. can anybody help me where and what code i have to write to upload the multiple line-items in that.
    Thanks in advance.

    i think this follows the rule for BDC with table control, can you please give me some example code and also the step number where i have to write the code for uploading the multiple line items.
    thanks in advance !

  • Incorrect field KNA1-STCEG in output list for input tax Line items-RFUMSV00

    Hi all,
    I found the incorrect field in RFUMSV00 - Advance Return for Tax on Sales/Purchases. If you want to configure the output list for Input tax: Line items, there is the field VAT Registration No. which has to be LFA1-STCEG, but there is incorrect field KNA1-STCEG. After that I cannot find the values for this field in my output.
    In the output list for Output tax: Line items there is correct field in configuration /LFA1-STCEG/.
    I tried to find some SAP notes but without avail.
    Thanks for help.
    Miroslav

    Hi,
    Please check the following OSS note:-
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=736203
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=640269
    It is picked up from bseg-stceg and not from lfa1-stceg or kna1-stceg
    Regards,
    Gaurav

  • Tax Line item

    Hi Gurus,
    I have been trying to create a Vendor Invoice (FB60) & in the line item I have assigned a Input Tax Code. However, the tax line item that should have been created automatically, is not getting generated.
    Once I find out the Tax Account for that Tax Code & manually enter the 'tax line item' & try to simulate, I get a message that "Enter the Tax Base Amounts for Account _____ in company code _____.
    I am at a loss as to,
    Firstly, why is the Tax Line item not getting created automatically?
    Secondly, when I manually enter the Tax Line Item, what does the error I am getting mean & how do I deal with it?
    Gurus, please help me.
    Thanks in advance.
    Regards,
    Debojit Dey

    Hi Debojit,
    Pl. check this config step. Check whether you have selected vaues in the field <b>Posting Indicatior</b> for the Account Key you have created for the tax type.
    The vaues are as under:
    Pstng ind. Short text                                                                               
    1              No posting required                         
    2              Separate line item                          
    3              Distribute to relevant expense/revenue items
    Path: <b>Financial Accounting> Tax on Sales/Purchases> Basic Settings> Check and Change Settings for Tax Processing</b>-   Select you account key and enter the vales in the field <b>Posting Indicatior</b>. 
    Hope this will solve your issue.
    Regards,
    Vijay.

  • Remittance challan creating-error no tax line item

    hi
    while creating remitance challan it showing error '' no tax line item exist''
    tax line item showing open item that too i have posted in last month first1.8.2008.to day i am creating challan but it is showing that error
    thank you
    sowmya

    Hi
    I hope you've checked the business place entered in J1INCHLN. If yes, then check what is the recepient type filled in your Vendor masters ? May be the recepient type you are typing in J1INCHLN is different from that of the vendor master
    regards
    Parag  Bhargava

  • How to make plant default on the line item along with the item category

    Hi All,
    I want to default Plant on the line item along with the item category.In order to meet the following scnario.
    1. I have two plants,first plant is maintained for the valuated item and the second plant is maintained for the non valuated item (Free Goods).
    Whenever user is entering an item in the sales order for which corresponding free goods item is maintained in the master record.System is proposing two lines items in the sales order.
    First line item is the main item which appears along with the Plant 1 which contains valuated items
    Second line item is for the Free of charge item which is being proposed from Plant 2, which contains the non valuated items.
    I want that the system should always propose Plant 1 with main item and Plant 2 with the Free of Charge item by default. (Along with the item category TAN and TANN)
    Rahul

    Delivering Plant is determined in the following order
    1. Customer material info record.
    2. Customer master
    3. Material master.
    Use one of them an default your plant.
    I think in your case you can use the materila master which will give an item level plant different. The other two will default the plant at the header level.
    regards
    jude

  • One line item delivery for 3rd party sales order

    Hello Experts,
    We have configured a 3rd party sales order process where the PR gets created. We are using scheduling agreement(PO) and creating Schedule line and doing a GR for partial line items.  The stock is recieved as a Sales Order stock.
    But when i create a Sales Delivery the delivery document copies all the line items (ieven for the ones which we don't have GR)  from the sales order and we have to manually delete the line items from delivery doc.
    Is there a way i can restrict the delivery document to only copy the line items from the sales order  for which the sales order stock is available? If so how can we do that?
    Appreicate your help.
    Thanks
    Arpita Rani

    Hello All,
    We have configured a 3rd party sales order process. The schedule line category is configured with account assignment categoory as "M". when we are creating GR the Moving average price of the material  is not getting updated.
    But if i replace with "E" it is getting updated, but the CO-PA is not getting generated for Profitability segment reporting.--we need profitability segment reportng.
    Can some one tell me how we can update the moving average price using acc. asssignment category type "M" at the same time the Profitability segement information is updated.
    THanks in advance
    Appreciate your help
    Arpita Rani

  • WHT - No unpaid tax lines exist for the given selection criteria

    Before going to execute Create remittance challan J!INCHLN ,
    i entered all the mentioned  parameters and  try to save but  i got error message  as follows
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updating. Check the entries.
    Procedure
    Check entries in table WITH_ITEM for the open tax items chosen for clearing.

    Hi,
    Please check for
    1. Section code/ Business place updated even in the tax lines of the document and not just the vendor line item.
    2. Check if there is a buzei mismatch between with_item table entries and bseg entries for the documents that are being pulled during the challan creation. If there is a Buzei mismatch, then please run the program in the note :885213 and then rerun the challan .
    3. Please check the note :1465529 . This is the consulting note for j1inchln.
    Hope this helps.
    Thank You.
    Regards,
    Anushya

  • No unpaid tax lines exist for the given selection criteria while+J1inchln

    Hi All,
    While doing J1inchln I am getting following error.
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.I have already updated Business Place and Section code while doing FB60.But still I am getting the same error.
    I have already updated Business Place and Section code in the entry while doing FB60 but error is coming. Please advise.
    Regards,
    Abhinav Sharma

    Hi ,
    Kindly go through the note no. 1465529 , which is a consulting note on J1INCHLN .
    It would resolve your query .
    Regards ,
    Dewang T

  • No unpaid tax lines exist for the given selection criteria.

    Hi
    at the time of remittance challan,getting following error:
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.

    Hi,
    It may cleared Manual posting at the time of posting.  If manual clear postings reverse and do through J1INCHLN only.
    and check the Date range for selection criteria.
    Regards,
    Kishore

  • No unpaid tax lines exist for given section criteria.

    Hello,
    Error: "No unpaid tax lines exist for given section criteria."
    what does it mean and how can we resolve it?????
    Thanks.

    Mr. Pari,
    There will be so many reasons to got this error message. If you miss either configuration settings or Transactional settings.
    Configuration:  Challan/Certificate - Number ranges, Groups, Assignments and Bus.Place, section codes - some times these configuration entries will not be updated in table entries, so kindly check the following tables .. J_1IEWTNUM,   J_1IEWTNUMGR_1.
    Transactional: Entries like Bus.Place/Sec code missing while doing Invoice entry or wrong transaction entries in Bus.place or section codes and dates in J1INCHLN/J1INCERT.
    So check all the Configuration and Transaction entries before executing the J1INCHLN/J1INCERT.
    I think it will solve your problem,
    Thanks & Regards,
    Dharma Rao. Yekula.

  • FI-SD Error FF805  No tax item exists for tax code R4 in a G/L account ite

    Dear, I have create IN ECC 6.0 a sales orden whit the following conditions
                                                                 CONDITION VALUE
    VKPO   Price Sales                0,00   EUR
    MWS     Sales Tax     4,000 %     0,00   EUR
    ZGGM    recharges                 100,00   EUR
    I have creata a billing document but when I execute the vf02 transaction for Release to Accountg apper the following error message
         Message no. FF805
    Diagnosis
         No tax item exists for tax code R4 in a G/L account item. A possible
         cause is an incorrect transfer of parameters by the application to the
         Accounting interface.
    The pricing procedure is
    1     0     VKP0 2     2   5     0                                                                  6
    10     0     MWST  Sales Tax     S1016
    30     0                              2     4
    40     0     ZGGM30     5     5       
    This process work correctly in 4.5b version but not work in ECC 6.0
    I have cheking the note 112609 and other notes but work
    thanks

    Hi,
    Error message FF805 is usually due to configuration issues.
    Tax conditions, especially the main ones UTXJ or MWST can not have a condition base value that is 0. If you are using UTXJ, the condition needs to be statistical and 100%. This condition controls how all the remaining tax conditions are calculated; and how the tax codes are determined.
    Another cause of the error message is due to the reference steps in the pricing procedure. If the tax condition references a line that is not calculated in your document, the base value is 0 and you get the error. These reference steps also control how the tax codes are distributed. If you have conditions that are active and do not have a tax code, they are not within the reference for the tax condition, and you will get this error message. You must also have an active price for the tax condition to copy to when the billing document is released to accounting.
    Please also checknotes 327373, 400766, 385127..
    Hope this will help.
    Regards,
    Naveen.

  • No tax item exists for tax code O0 in a G/L account item.

    while posting the credit memo  for sales return accounting document is not created. its shows the error as No tax item exists for tax code O0 in a G/L account item.
    plz help me in solving the issue

    Dear Venkatesh,
                  1.First check that material wether that is relevent for taxes or not.
    Check wether Tax indicator set or not in the material master Sales org data1 or 2
    2.Check condition record exists for that material or not
    3.Then check the Tax code and G/L account assignment in the transaction FTXP
    I hope it will help you,
    Regards
    Murali.
    Edited by: Murali Mohan.T on Feb 13, 2008 10:42 AM

  • Profit Center is missing in the line item 002 for Customer Payment

    Dear Friends,
    We are having one issue with Customer incoming payment. We are following the Business area concept. Now the customer is from the different business area and paying at Ho. HO has different Business area. So while processing the incoiming payment i have to enter different business ares for both the customer and Bank line item. There is no profit center field in the customer line tiem. When we are trying to post it, system is giving error message "Balancing field Profit center not there in line item 002".
    If i process the same scenario with same business area for both the line item then system is picking th eprofit center from the bank line item.
    Is there any possibility i can map this scenarion in the Document splitting functionality?? or else how can i process this scenario??
    Regards,
    Deva

    Hi Lakshmipathi,
    Yes the Document split has been activated. This issue is the specific one. We have different C&F location. Sales happens accross India. Hence we have created the Business area concept for each location to get the location wise balance sheet. I have also activated the zero balancing for Profit center and also Business area so that i can derive the Location wise Balance sheet.
    Now the sales invoice has been processed from C&F Location. Customer deposit the Cheque directly to the Head office Bank and not at the C&F Location bank. I don't want to clear the existing open item because 50% of the cheque gets bounced. So i am booking the incoming payment without clearing the open item.
    While processing the incoming payment user is entering the C&F location business area in the customer line item (Credit line item) and Head office business area for the Bank line item as the bank is at the Head office so that we can arrive the Balance sheet.
    Now system is not deriving the profit center for the customer line item even though the business area wise zero balance has been activated. Recon account field status group has market as optional for profit center but in F-28 i am not able to get the profit center field (Because it is balance sheet item).
    The Document type already been configure for Document split and the Recon account also categorised as Customer inthe doc splitting. I don't have any problem with document split other than this issue.
    For this issue anything can be done in the document split??
    Regards,
    Devendran

  • Substitution of Business Area for Tax Line Items for Invoices posted in MM

    Hi
    We have one Business Area for every company code. A substitution rule has been created to populate Business Area in Tax Line Items, while booking vendor invoice. The substitution rule has been defined as
    Prerequite
    Company Code = 1234 and GL = 1323232
    Substitution
    Business Area = 6668
    The system is working fine, when the Vendor Invoice is posted through FI. However, when the vendor invoice is generated through MIRO or MIR7, the Business Area is not substituted.
    In Table VWTYGB01, we have maintained BSEG-GSBER as a field allowed for substitution with Boolean Class 09.
    We have created the susbstitution rule for Text and Assignment also and the rules are working fine for all document posted through FI and MM
    Regards
    Sanil
    Sanil K Bhandari

    Hi
    Business Area is a sensitive field, agreed. However, the substitution rule is working fine for FI posted documents and the issue is in MM generated documents.
    Regards
    Sanil Bhandari

Maybe you are looking for