No Web Authentication - but excluded client with reason code 4

Hello,
we are using a WLC 4400 with Software Version 5.0.148.0 and WCS Version 5.0.56.2.
Access Points are AIR-LAP1131AG-E-K9.
We have problems with one client (Windows XP SP3). The computer loses the wireless connection all the time, but we don't know why. Duration of the connections are different.
So there are a lot of minor alarms saying “Client which was associated with AP, interface '0' is excluded. The reason code is '4(Web Authentication failed 3 times.)'.”
But the wireless lan which is used by the client is not configured with Web Authentication!! It is only using MACFilter. That's very strange! (There is another wireless lan configured with Web Authentication.)
The minor alarms are created by different Access Points, amongst others by the Access Point where the client is connected to! (All Access Points radiate all wireless lans.)
Regarding to this client the SyslogServer often says:
Sep 17 16:01:57.187 1x_ptsm.c:404 DOT1X-3-MAX_EAPOL_KEY_RETRANS: Max EAPOL-key M1 retransmissions exceeded for client LOCAL USE 0 ERROR CONDITION
Sep 17 16:02:07.885 1x_ptsm.c:511 DOT1X-3-PSK_CONFIG_ERR: Client may be using an incorrect PSK LOCAL USE 0 ERROR CONDITION
Last week I tried the trouble shooting of the WCS with the following effect:
Time :09/18/2009 19:01:39 Message :Controller association request message received.
Time :09/18/2009 19:01:39 Message :Association request received from a client has an invalid RSN IE.(One reason could be mismatch in WPA2 algorithm).
Time :09/18/2009 19:01:39 Message :Received reassociation request from client.
Time :09/18/2009 19:01:39 Message :The wlan to which client is connecting requires 802 1x authentication.
Time :09/18/2009 19:01:39 Message :Client moved to associated state successfully.
Time :09/18/2009 19:01:39 Message :802.1x authentication message received, static dynamic wep supported.
Time :09/18/2009 19:01:39 Message :802.1x authentication was completed successfully.
Time :09/18/2009 19:01:39 Message :Client has got IP address, no L3 authentication required.
I think the problem is hidden at the client but I don't know what it could be. The PSK can not be incorrect because the client is able to connect to the wireless lan but later loses the connection.
Does somebody has an idea or knows the error messages?!
Greetings lydia

Hi,
I'm exactly with the same problem! Can you please tell me if you were able to solve this?
Thank you!
Best regards,

Similar Messages

  • Limiting or control for Residual payment with reason codes

    Hi FI Gurus,
    When we are received or making payment to customer or vendor, sometimes we need to clear the invoice by receiving or making payments with small differences through residual payment. Is there any control for limiting residual payment.
    Lets have an example
    invoice posted for 1000
    customer dr 1000
    sales       cr  1000
    Partial payment recd 500
    cash/bank dr 500
    customer cr   500
    final payment received 350 and balanace amount adjusted with residual payment by defining reason code like rounding off difference. So in this case accounting entry will be
    customer cr 350  
    rounding off diff 150
    cash/bank 500
    being final payment agaisnt invoice
    My question:   Is there any way to restrict the residual payment like 10% or 20% of total invoice i.e. 100 or 200 and not more than 20% ?  other wise sometime user may adjust any amount may be 100000 through this way by putting the same reason code, which is not fair.
    I checked SPRO setting but i did not get anyt setting relating to above case.
    If any body know, please let me know? Thanks in advance
    Regards,
    Prakash

    Hi Lawerance,
    Thanks for reply.
    But I am looking for amount adjusted through residual with reason code. I dont think there is any limitation or control in the SPRO standard setting. Tolerance is preventing user to post document for more than a specific amount. But my question is something different.
    I want to control the user for adjusting amount from residual tab with selecting reason code. In other words user should not adjust more than some limit with residual payment by selecting reason codes. Thanks.
    Regards,
    Prakash

  • Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOA

    Can anyone help figure out why the Catalyst 6509 is not able to assign an IPv6 address? Thank you.
    Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOADDRS-AVAIL(2). My configuration on the 6500 for the DHCPv6 server is:
    ipv6 dhcp database disk0://DHCPV6-DB
    ipv6 dhcp pool VLAN206IPV6
     prefix-delegation pool VLAN206IPV6-POOL
     dns-server 2620:B700:0:1001::53
     domain-name global.bio.com
    ipv6 local pool VLAN206IPV6-POOL 2620:B700:0:12C7::/65 65
    interface Vlan206
     description *** IPv6 Subnet ***  
     ip address 10.2.104.2 255.255.255.0
     ipv6 address 2620:B700:0:12C7::2/64
     ipv6 nd prefix 2620:B700:0:12C7::/64 14400 14400 no-autoconfig
     ipv6 nd managed-config-flag
     ipv6 dhcp server VLAN206IPV6
     standby version 2
     standby 0 ip 10.2.104.1
     standby 0 preempt
     standby 6 ipv6 2620:B700:0:12C7::1/64
     standby 6 preempt
    I'm getting a result from my debug as follows:
    Apr 10 16:28:02.873 PDT: %LINK-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
    Apr 10 16:28:02.873 PDT: %LINK-SP-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
    Apr 10 16:28:02.877 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/2, changed state to up
    Apr 10 16:28:03.861 PDT: IPv6 DHCP: Received SOLICIT from FE80::5D5E:7EBD:CDBF:2519 on Vlan206
    Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
    Apr 10 16:28:03.861 PDT:   src FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
    Apr 10 16:28:03.861 PDT:   dst FF02::1:2
    Apr 10 16:28:03.861 PDT:   type SOLICIT(1), xid 8277025
    Apr 10 16:28:03.861 PDT:   option ELAPSED-TIME(8), len 2
    Apr 10 16:28:03.861 PDT:     elapsed-time 101
    Apr 10 16:28:03.861 PDT:   option CLIENTID(1), len 14
    Apr 10 16:28:03.861 PDT:     00010001195FD895F01FAF10689E
    Apr 10 16:28:03.861 PDT:   option IA-NA(3), len 12
    Apr 10 16:28:03.861 PDT:     IAID 0x0FF01FAF, T1 0, T2 0
    Apr 10 16:28:03.861 PDT:   option UNKNOWN(39), len 32
    Apr 10 16:28:03.861 PDT:   option VENDOR-CLASS(16), len 14
    Apr 10 16:28:03.861 PDT:   option ORO(6), len 8
    Apr 10 16:28:03.861 PDT:     DOMAIN-LIST,DNS-SERVERS,VENDOR-OPTS,UNKNOWN
    Apr 10 16:28:03.861 PDT: IPv6 DHCP: Option IA-NA(3) is not supported yet
    Apr 10 16:28:03.861 PDT: IPv6 DHCP: Sending ADVERTISE to FE80::5D5E:7EBD:CDBF:2519 on Vlan206
    Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
    Apr 10 16:28:03.861 PDT:   src FE80::21D:E6FF:FEE4:4400
    Apr 10 16:28:03.861 PDT:   dst FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
    Apr 10 16:28:03.861 PDT:   type ADVERTISE(2), xid 8277025
    Apr 10 16:28:03.861 PDT:   option SERVERID(2), len 10
    Apr 10 16:28:03.865 PDT:     00030001001DE6E44400
    Apr 10 16:28:03.865 PDT:   option CLIENTID(1), len 14
    Apr 10 16:28:03.865 PDT:     00010001195FD895F01FAF10689E
    Apr 10 16:28:03.865 PDT:   option STATUS-CODE(13), len 15
    Apr 10 16:28:03.865 PDT:     status code NOADDRS-AVAIL(2)
    Apr 10 16:28:03.865 PDT:     status message: NOADDRS-AVAIL

    Hello,
    maybe hitting the following bug.
    Pv6 Address Assignment Support for IPv6 DHCP Server
    CSCse81385
    Hope this helps

  • Calls Getting disconnected with reason code 26

    Hi,
    Few of my calls are getting disconnected with reason code 26. on agent screen it just flash and disconnect.as per RCD its showing Error code 0( fine) and finally its ending at Skill Group Node. talk time is 1 or 2 seconds. agents having auto answer setting as well as IP Phone set auto ans with headset.
    my setup is IPIVR based UCCE setup.
    Please help
    Regards-
    PK

    Hi PK,
    CD 26 normally indicates Resource Not available in CUCM side. please check the Jtapi gateway process logs for the failed calls. you should be able to see something similar to below
    19:08:37:896 PG1A-jgw1 Trace: ConnFailedEv CID: 27224748 Addr: 80002985 CiscoCause: CAUSE_RESOURCESNAVAIL Cause: CAUSE_RESOURCES_NOT_AVAILABLE.
    if that is the case , please check from CUCM perspective as well.
    Regards,
    Sasikumar.

  • F-28 payment with reason codes

    Hi All
    In F-28 I made a payment to a customer and I was unable to see the reason code in fbl5n, Can any one help where I can see the payments made with reason code?

    Hi,
    Try adding the reason code through FB02 for that document in additional data and save, to see whether the reason code is getting stored at the line item level.  If it does then there might be some mistake at the time of data entry in the original document.
    Hope this info helps.
    Regards,
    Venkat

  • Clearing with reason code

    Dear Guru's
    I am clearing customer invoice.
    When I am clearing with Incoming payment at F-28 I am having a difference of Under or Over payment.
    All reason codes were customized.
    I am unable to execute F-28 for posting the difference with reason code.
    Can any body help me clearing the difference with Reason Code.
    Rao

    Hello,
    Recheck your config. in
    OBBE
    OBXL
    OBCW
    OBCR
    OBCS
    Regards,
    Ravi

  • NPS return Internal Error with Reason Code 1

    Hi,
    I am having an embedded client which is trying to authenticate using PEAP-MSCHAPv2 using NPS server 2008.
    NPS returns this error 
    Network Policy Server discarded the request for a user.
    Contact the Network Policy Server administrator for more information.
    User:
    Security ID:
    SANDBOX\deeps
    Account Name:
    deeps
    Account Domain:
    SANDBOX
    Fully Qualified Account Name:
    SANDBOX\deeps
    Client Machine:
    Security ID:
    NULL SID
    Account Name:
    Fully Qualified Account Name:
    OS-Version:
    Called Station Identifier:
    Calling Station Identifier:
    NAS:
    NAS IPv4 Address:
    xx.xx.xx.xx
    NAS IPv6 Address:
    NAS Identifier:
    NAS Port-Type:
    Wireless - Other
    NAS Port:
    5
    RADIUS Client:
    Client Friendly Name:
    Deeps_Canopy_AP
    Client IP Address:
    xx.xx.xx.xx
    Authentication Details:
    Connection Request Policy Name:
    deeps-test
    Network Policy Name:
    deeps-test
    Authentication Provider:
    Windows
    Authentication Server:
    USIL01PMPTST01.sandbox.com
    Authentication Type:
    EAP
    EAP Type:
    Account Session Identifier:
    Reason Code:
    1
    Reason:
    An internal error occurred. Check the system event log for additional information.
    This is not very helpful as it doesn't describe what went wrong and where.
    What else logs can I enable to debug further ? Attached are few logs from various components,
    Certificate,CRP and Network Policy are fine as they work fine with other standard client.
    Please help.
    Thanks,
    Netlogon logon and it return 0.
    4/20 05:31:32 [LOGON] [6480] SANDBOX: SamLogon: Network logon of SANDBOX\deeps from  Entered
    04/20 05:31:32 [LOGON] [6480] SANDBOX: SamLogon: Network logon of SANDBOX\deeps from  Returns 0x0
    Logs of NPS IN1504.log
    <Event><Timestamp data_type="4">04/20/2015 04:16:16.407</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><User-Name
    data_type="1">deeps</User-Name><NAS-IP-Address data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU
    data_type="0">1020</Framed-MTU><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 25</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:16.407</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 25</Class><Session-Timeout data_type="0">30</Session-Timeout><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor
    data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name
    data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name
    data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:16.672</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 26</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:16.672</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 26</Class><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Session-Timeout
    data_type="0">30</Session-Timeout><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name
    data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:16.938</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 27</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:16.938</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 27</Class><Session-Timeout data_type="0">30</Session-Timeout><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name
    data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type
    data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type
    data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:17.878</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 28</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:17.878</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 28</Class><Session-Timeout data_type="0">30</Session-Timeout><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name
    data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type
    data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type
    data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:18.141</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 29</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:18.141</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 29</Class><Session-Timeout data_type="0">30</Session-Timeout><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name
    data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type
    data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type
    data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:18.405</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 30</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:18.405</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 30</Class><Session-Timeout data_type="0">60</Session-Timeout><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name
    data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type
    data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type
    data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:18.669</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 31</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:18.669</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 31</Class><Session-Timeout data_type="0">60</Session-Timeout><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name
    data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type
    data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type
    data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:19.629</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 32</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 04:16:19.629</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 32</Class><Session-Timeout data_type="0">60</Session-Timeout><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name
    data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type
    data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type
    data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:29.898</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><User-Name
    data_type="1">deeps</User-Name><NAS-IP-Address data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU
    data_type="0">1020</Framed-MTU><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 40</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:29.898</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 40</Class><Session-Timeout data_type="0">30</Session-Timeout><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor
    data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name
    data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name
    data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:30.176</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 41</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:30.176</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 41</Class><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Session-Timeout
    data_type="0">30</Session-Timeout><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name
    data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:30.441</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 42</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:30.441</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 42</Class><Session-Timeout data_type="0">30</Session-Timeout><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name
    data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type
    data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type
    data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:31.383</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 43</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:31.383</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 43</Class><Session-Timeout data_type="0">30</Session-Timeout><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name
    data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type
    data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type
    data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:31.655</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 44</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:31.655</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 44</Class><Session-Timeout data_type="0">30</Session-Timeout><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name
    data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type
    data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type
    data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:31.920</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 45</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:31.920</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 45</Class><Session-Timeout data_type="0">60</Session-Timeout><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name
    data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type
    data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type
    data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:32.184</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 46</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:32.184</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 46</Class><Session-Timeout data_type="0">60</Session-Timeout><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name
    data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type
    data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type
    data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:32.458</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><NAS-IP-Address
    data_type="3">10.110.61.2</NAS-IP-Address><NAS-Port data_type="0">5</NAS-Port><NAS-Port-Type data_type="0">18</NAS-Port-Type><Framed-MTU data_type="0">1020</Framed-MTU><Client-IP-Address
    data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><User-Name data_type="1">deeps</User-Name><Proxy-Policy-Name
    data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Class
    data_type="1">311 1 10.120.133.1 04/20/2015 08:26:24 47</Class><Authentication-Type data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Quarantine-Update-Non-Compliant
    data_type="0">1</Quarantine-Update-Non-Compliant><Packet-Type data_type="0">1</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>
    <Event><Timestamp data_type="4">04/20/2015 05:31:32.458</Timestamp><Computer-Name data_type="1">USIL01PMPTST01</Computer-Name><Event-Source data_type="1">IAS</Event-Source><Class data_type="1">311
    1 10.120.133.1 04/20/2015 08:26:24 47</Class><Session-Timeout data_type="0">60</Session-Timeout><Client-IP-Address data_type="3">10.110.61.2</Client-IP-Address><Client-Vendor data_type="0">0</Client-Vendor><Client-Friendly-Name
    data_type="1">Deeps_Canopy_AP</Client-Friendly-Name><Quarantine-Update-Non-Compliant data_type="0">1</Quarantine-Update-Non-Compliant><Proxy-Policy-Name data_type="1">deeps-test</Proxy-Policy-Name><Provider-Type
    data_type="0">1</Provider-Type><SAM-Account-Name data_type="1">SANDBOX\deeps</SAM-Account-Name><Fully-Qualifed-User-Name data_type="1">SANDBOX\deeps</Fully-Qualifed-User-Name><Authentication-Type
    data_type="0">5</Authentication-Type><NP-Policy-Name data_type="1">deeps-test</NP-Policy-Name><Packet-Type data_type="0">11</Packet-Type><Reason-Code data_type="0">0</Reason-Code></Event>

    Hi chitsri,
    The log you provided above only contains the successful authentication.
    Because standard clients are working fine with NPS, I assume that this issue is caused by the embedded client.
    >>What else logs can I enable to debug further ?
    We may try to perform a network capture on the NPS server. Then find out what's the difference between the embedded client and standard clients.
    To download the the network monitor, please click the link below:
    http://www.microsoft.com/en-hk/download/details.aspx?id=4865
    If we can't find any hint from the capture data, you may contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
    To obtain the phone numbers for specific technology request please take a look at the web site listed below:
    http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Incoming Payment with Underpayment/Overpayment in F-28 with reason code

    Hi All,
    While making a incoming payment with overpayment / underpayment in F-28, I am getting an error u2018Reason codes with automatic charge-off are not permitted here u2018. The reason code is defined with charge off checked and the account for differences is defined for the same.
    Please advice
    Thanks

    Please check "Indicator: Charge off difference via separate account" in reason code settings (TCode OBBE). If this indicator is set against the reason code that you are using, you will getting the error.
    What you can do is either use different reason code or in residual items tab you can specify the reason code with residual items.
    Thanks,
    Sukhbold
    Edited by: Sukhbold Altanbat on Oct 13, 2011 7:47 AM

  • Safari cannot load web pages, but still communicates with the www

    I am using Safari 6.0.5 as my main web browser. Unexpectedly, a week ago it stopped loading web pages, though apparently the program somewhat still communicates with the world outside, since I can enter any text in the address bar and get responses in real time from Google.
    Other programs using the internet work regularly. I have already tried the usual set of solutions proposed in the official documents.
    Thanks in advance,
    Valerio

    16/07/13 08:32:44,048 SubmitDiagInfo[305]: Launched to submit Diagnostics and Usage
    16/07/13 08:34:58,455 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:34:58,455 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:34:58,456 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:36:20,212 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:36:20,215 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:36:20,216 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:37:40,026 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:37:40,028 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:37:40,029 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:39:24,687 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:39:24,688 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:39:24,688 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:40:31,347 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:40:31,348 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:40:31,349 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:40:37,794 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:40:37,796 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:40:37,797 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
    16/07/13 08:45:31,399 WindowServer[85]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    16/07/13 08:45:31,419 loginwindow[57]: find_shared_window: WID -1
    16/07/13 08:45:31,419 loginwindow[57]: CGSGetWindowTags: Invalid window 0xffffffff
    16/07/13 08:45:31,419 loginwindow[57]: find_shared_window: WID -1
    16/07/13 08:45:31,419 loginwindow[57]: CGSSetWindowTags: Invalid window 0xffffffff
    16/07/13 08:45:31,438 loginwindow[57]: ERROR | -[LWBuiltInScreenLockAuthLion preLoad] | guestEnabled is true, but guest mode is not set to a usable value
    16/07/13 08:45:31,782 WindowServer[85]: Created shield window 0x5a for display 0x04280380
    16/07/13 08:45:31,783 WindowServer[85]: device_generate_desktop_screenshot: authw 0x7feb82c49380(2000), shield 0x7feb82c24510(2001)
    16/07/13 08:45:31,873 WindowServer[85]: device_generate_lock_screen_screenshot: authw 0x7feb82c49380(2000), shield 0x7feb82c24510(2001)
    16/07/13 08:45:31,929 loginwindow[57]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    16/07/13 08:45:31,930 loginwindow[57]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    16/07/13 08:46:31,374 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fd60be04910> Tue Jul 16 09:23:45 2013 CEST (approx)
    16/07/13 08:46:31,374 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fd60be04910> Tue Jul 16 09:23:45 2013 CEST (approx)
    16/07/13 08:46:31,528 launchctl[319]: launchctl: Couldn't stat("/Library/LaunchAgents/com.oracle.java.Java-Updater.plist"): No such file or directory
    16/07/13 08:46:31,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
    16/07/13 08:46:34,000 kernel[0]: LE is supported - Disable LE meta event
    16/07/13 08:46:34,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    16/07/13 08:46:34,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    16/07/13 08:46:34,000 kernel[0]: Wake reason: EHC1
    16/07/13 08:46:58,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    16/07/13 08:46:58,000 kernel[0]: RTC: PowerByCalendarDate setting ignored
    16/07/13 08:46:58,000 kernel[0]: RTC: PowerByCalendarDate setting ignored
    16/07/13 08:46:58,000 kernel[0]: Previous Sleep Cause: 5
    16/07/13 08:46:58,000 kernel[0]: The USB device HubDevice (Port 1 of Hub at 0x1d000000) may have caused a wake by issuing a remote wakeup (2)
    16/07/13 08:46:58,000 kernel[0]: wlEvent: en0 en0 Link DOWN virtIf = 0
    16/07/13 08:46:58,000 kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
    16/07/13 08:46:58,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
    16/07/13 08:46:58,000 kernel[0]: en0: 802.11d country code set to 'X3'.
    16/07/13 08:46:58,000 kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    16/07/13 08:46:58,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    16/07/13 08:46:58,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    16/07/13 08:46:58,000 kernel[0]: The USB device HubDevice (Port 8 of Hub at 0x1d100000) may have caused a wake by issuing a remote wakeup (3)
    16/07/13 08:46:58,000 kernel[0]: TBT W (2): 0x0100 [x]
    16/07/13 08:46:58,000 kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 2 of Hub at 0x1d180000) may have caused a wake by issuing a remote wakeup (3)
    16/07/13 08:46:58,000 kernel[0]: HID tickle 175 ms
    16/07/13 08:46:58,297 hidd[61]: MultitouchHID: device bootloaded
    16/07/13 08:46:58,000 kernel[0]: NVRM: 0x702a called in D3
    16/07/13 08:46:58,000 kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    16/07/13 08:46:58,878 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2004), shield 0x7feb82c24510(2001), lock state 3
    16/07/13 08:46:58,878 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
    16/07/13 08:46:58,880 WindowServer[85]: Created shield window 0x5b for display 0x003f003d
    16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2002), shield 0x7feb82c24510(2001), lock state 3
    16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
    16/07/13 08:46:58,880 WindowServer[85]: Created shield window 0x5c for display 0x003f003e
    16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2002), shield 0x7feb82c24510(2001), lock state 3
    16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
    16/07/13 08:46:58,881 WindowServer[85]: Created shield window 0x5d for display 0x003f003f
    16/07/13 08:46:58,881 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2002), shield 0x7feb82c24510(2001), lock state 3
    16/07/13 08:46:58,881 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
    16/07/13 08:46:58,923 loginwindow[57]: resume called when there was already a timer
    16/07/13 08:46:59,000 kernel[0]: en0: 802.11d country code set to 'IT'.
    16/07/13 08:46:59,000 kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    16/07/13 08:46:59,061 configd[17]: network changed: v4(en0-:10.0.1.2) DNS- Proxy- SMB-
    16/07/13 08:46:59,328 hidd[61]: MultitouchHID: device bootloaded
    16/07/13 08:47:00,000 kernel[0]: MacAuthEvent en0   Auth result for: b8:c7:5d:05:67:5e  MAC AUTH succeeded
    16/07/13 08:47:00,000 kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
    16/07/13 08:47:00,000 kernel[0]: AirPort: Link Up on en0
    16/07/13 08:47:00,000 kernel[0]: en0: BSSID changed to b8:c7:5d:05:67:5e
    16/07/13 08:47:00,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
    16/07/13 08:47:00,000 kernel[0]: AirPort: RSN handshake complete on en0
    16/07/13 08:47:00,651 configd[17]: network changed: v4(en0+:10.0.1.2) DNS+ Proxy+ SMB+
    16/07/13 08:47:00,660 UserEventAgent[11]: Captive: en0: Not probing 'Ayn Rand 5 GHz' (protected network)
    16/07/13 08:47:00,663 configd[17]: network changed: v4(en0!:10.0.1.2) DNS Proxy SMB
    16/07/13 08:47:02,248 airportd[320]: _doAutoJoin: Already associated to “Ayn Rand 5 GHz”. Bailing on auto-join.
    16/07/13 08:47:02,263 airportd[320]: _doAutoJoin: Already associated to “Ayn Rand 5 GHz”. Bailing on auto-join.
    16/07/13 08:47:32,956 com.apple.backupd[330]: Starting automatic backup
    16/07/13 08:47:33,107 com.apple.backupd[330]: Backup failed with error: 19
    16/07/13 08:47:33,107 com.apple.backupd[330]: Starting automatic backup
    16/07/13 08:47:33,000 kernel[0]: nspace-handler-set-snapshot-time: 1373957255
    16/07/13 08:47:33,000 kernel[0]: nspace-handler-set-snapshot-time: 1373957255
    16/07/13 08:47:33,552 com.apple.backupd[330]: Attempting to mount network destination URL: afp://***;[email protected]/Time%20Capsule%20di%20Valerio%20Fi l
    16/07/13 08:47:34,000 kernel[0]: AppleSRP started.
    16/07/13 08:47:36,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=339[ksadmin] clearing CS_VALID
    16/07/13 08:47:36,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=343[ksadmin] clearing CS_VALID
    16/07/13 08:47:42,707 com.apple.backupd[330]: Mounted network destination at mount point: /Volumes/Time Capsule di *** using URL: afp://***;[email protected]/***
    16/07/13 08:47:42,000 kernel[0]: AFP_VFS afpfs_mount: /Volumes/Time Capsule ***, pid 332
    16/07/13 08:47:42,000 kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff80df13a008 /Volumes/Time Capsule di *** (error = 0, retval = 0)

  • WebI XI 3.1 Client with XI2 SP1 Server

    Hi
    I'm trying to get an installation of WebI XI 3.1 working.  We have XI2 SP1 on our server.
    I have installed the software, when I try to login I get the error message saying "login failed."
    When I try to update the licence key on the CMC I get the following message.
    "There was an error while writing data back to the server: License Key Error: Invalid Key..."
    Does anyone have anything to say regarding combination of client server version.
    Thanks in advance.
    Sean

    Hi Sean,
    This forum is not for Business objects, it's BI related.
    Anyways, Please check the below links for more information on your issue;
    http://www.forumtopics.com/busobj/viewtopic.php?t=60364&start=0&postdays=0&postorder=asc&sid=9e1c3b5b9a7c8d871fe59eecb9bbcbb8
    http://www.forumtopics.com/busobj/printview.php?t=99235&start=0&sid=a9a560fd69eeee44987841454212210a
    If you want more on the Business object you to go to this forum;
    http://www.forumtopics.com/busobj/search.php
    Hope it help you.
    With Regards,
    Ravi Kanth

  • What are steps configure Certificate based authentication for Wireless clients with ACS 5.3?

    I need to autheticate my clients connecting via wireless.
    clients have user certificate installed on them, i need help configuring the ACS to do the authentication.
    can some one please help me with the steps.
    Thanks

    Two primary steps
    - define the trust certificates needed to verify the clients user certificates
    Users and Identity Stores > Certificate Authorities
    - change result of identity policy to select a certificate authorization profile. If have the defautl config
    Access Policies > Access Services > Default Network Access > Identity
    by default can select the "CN Username" as a result

  • Able to connect to the mypassport web site, but the screen with the License Agreement does not come

    My PC runs under Windows 8.1Under the WiFi mode, the Mypassport wireless disk is identified and is connected, with no limitation. As expected.When I follow the procedure as mentionned in the User Manual, I have to use my browser (firefox in this case) and I type the adress : http://my passport.I enter the WD website, but instead having a window with the License Agreement to accept, I find a regular web page with the various WD external disks: http://support.wdc.com/product/download.asp?level1=2&lang=fr.I tried the other option suggested in the manual with the proposed IP adress, and I find a WD page with a user manual.Conclusion : I can use the disk using the USB cable, but the disk does not work under the WIFI mode.What should I do to connect to the right page?Thanks for the answer. 

    Good information. I don't believe that an internet connection is required when you first set up the MPW, so let's get that done. An internet connection is only required to do firmware updates and connect to Cloud services. You should update the firmware after you have the MPW connected properly and working. I don't think there is a Windows Phone version of the WD My Cloud App. You could use the browser on the phone to access the MPW Dashboard. But there may be issues with that so let's keep it simple. Follow these instructions like a recipe, but keep in mind what it says in the manual. You will need both these instructions and those in the manual. 1. Disconnect the USB cable from the 4G hotspot.2. Turn off the 4G hotspot. Power it down to make sure its network isn't available.3. Make sure your PC is turned on, and the Wi-Fi is on, looking for a network.4. Turn on the MPW and make sure the Wi-Fi LED lights up.5. Press the WPS (Wi-Fi) button on the MPW until the Wi-Fi LED flashes.6. Your PC should see the MPW network. Connect to that network.7. Turn on the 4G hotspot. Wait for it to start up fully. Do not connect your PC to the 4G hotspot at this time. Wait until the instructions say to connect to the 4G hotspot.8. Use a browser to go to the address http://mypassport (unless you have already changed that name when you set the MPW wireless password. If so use that name, or the IP address; http://192.168.60.1 ) This should open the MPW Dashboard for you. Depending on how much of the setup has actually been completed, you may be asked to set up a wireless password at this stage. If so, the MPW will force your PC to disconnect, and you will need to connect again. If you have already set a wireless password, you should be ready to complete the setup and connect the MPW to the 4G hotspot. The manual will have more information about this step, but you should be able to follow the instructions on screen.9. On the Wi-Fi tab in the Dashboard, you should see a graphic with your PC on the left, the My Passport Wireless in the middle, and a Wi-Fi selection list on the right. Select your 4G hotspot to connect to, enter the 4G hotspot security information (password), and the MPW will connect to the 4G hotspot Wi-Fi network. From now on the MPW will remember the 4G hotspot Wi-Fi network and connect to it when it is available.10. Your PC will now have internet access through the MPW, then through the 4G hotspot, to the internet. This will work fine, but it will be a bit slower than what you are used to, so now . . . 11. Close the browser with the Dashboard displayed.12. Disconnect your PC's Wi-Fi from the MPW network and connect your PC again to the 4G hotspot Wi-Fi network. Do not use the USB connection at this time. Use the Wi-Fi connection from the PC to the 4G hotspot.13. Open a browser window again and connect to the MPW Dashboard using http://mypassport  This may be a be a bit slow to respond, as it requires network discovery on your PC to do its thing. The IP address  http://192.168.60.1 will not work now as it only works when you directly connect to the MPW, rather than via a router, or 4G hotspot in this case. If you know how to look up the IP address that the 4G hotspot gave the MPW on its network, you could use that address, which should connect faster. But http://mypassport, or http://<YourNameForTheMPW> if you changed the name should work.14. If the Dashboard worked in the above step, you can finish any setup changes you may want to do, but you are all good to go. The MPW should appear in the "Network" section of Windows Explorer, and you should be able to copy files on and off the MPW, play music, videos, etc. that you have on the MPW. 15. Once you are happy that the MPW is working properly, change to using the USB connection from your PC to the 4G hotspot, if you want to, and check that everything still works properly. It should, as long as your 4G hotspot puts the USB and Wi-Fi connections on the same network, and acts as a router between all connections. Easy really, wasn't it?

  • Win7 7 Fox 4.01-Connects to Web Site but when Logon with ID & Password=sys hangs but Can do with Win Explorer 8

    Connects to ALL web sites OK-Banks/Cr Card & all log in OK with ID & Password. Except one-Connects OK, Input ID & Password,SignOn button=No connection. Was working 3 days ago.Works OK on Win Explorer 8 (same machine).
    Followed HELP & cleared Cookies/Cache=Banks etc needed input of ID etc. as expected & OK. Still hangs on this one Cr Card A/c.

    Connects to ALL web sites OK-Banks/Cr Card & all log in OK with ID & Password. Except one-Connects OK, Input ID & Password,SignOn button=No connection. Was working 3 days ago.Works OK on Win Explorer 8 (same machine).
    Followed HELP & cleared Cookies/Cache=Banks etc needed input of ID etc. as expected & OK. Still hangs on this one Cr Card A/c.

  • How to Configure SQLServer2008R2 to let Windows Authenticated Users Create Database with MCV4 Code First App

    Trying to Learn MVC code first with Vs2013 web express on windows 7 os computer. When code runs to create database get: An exception of type 'System.Data.SqlClient.SqlException' occurred in EntityFramework.dll but was not handled in user code
    Additional information: CREATE DATABASE permission denied in database 'master'.
    Have this problem with the 'OdeToFood' plurasight course as well with the
    'developing ASP.NET MvC 4 Web Applications Jump Start' MVA course.
    Re-installed sql2008r2 using window
    admin user and ran the project and get same message as when i run the project with the none admin user. 
    What are steps to allow database creation for admin user and none windows admin user?
    Daniel Howard

    David, thanks for the reply.
    I believe the problem may be something else because after adding the 
    user to 'sysadmin' and I still get the message
    Additional information: CREATE DATABASE permission denied in database 'master'.
    Perhaps I need to go to ASP.NET forum to ask the question.
    I will mark you answer as answer.
    Thanks again
    Daniel
    Daniel Howard

  • HT1414 phone is in recovery mode but cannot restore with error code 21,26

    After my latest update on my iPhone 4 my phone started just shutting down and restarting by itself. I have tried to restore the phone with the latest version of iTunes but now get the error message that iTunes has detected a phone in recovery mode. Well that's fine, I selected recovery and when it appears that the recovery mode is going to go through the recovery mode returns an error code.
    The first code I received is the error 1656, then a 26, then the final attempt I got an error code 21.
    This phone has never been dropped, mishandled, or taken any physical damage. It was working great before I attempted to update.
    Please if anyone else has experienced this let me know how you resolved these errors.
    I have attempted every trouble-shooting step indicated on the Apple support site.
    HELP!

    If you have seen and attempted as per the guidelines and not been successful, see the Red text.
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Maybe you are looking for

  • Error while accessing UIX pages when deployed using OC4J

    UIX: 2.1.9 JDeveloper: 9.0.3 Database: 8i Release 3. Using UIX and BC4J, I created few pages for a small application. I installed the OC4J standalone and configured setting library paths and and deployed this application. I extended the UixPageBroker

  • SQL Developer Data Modeler: Logical model, unable to create arc

    I have a logical model in SQL Developer Data Modeler. Entity A has two 'incoming' foreign key relations to entities B and C. Both releations have the same optionality and cardinality. I want to place both relations in an arc. I see the buttons in my

  • E-Rec : How to assign applications to requisitions?

    Hello Experts, We have just started blue-printing of E-Rec and I am successful creating a requisition from Recruiter's page. I am just concerned how to assign applications to a requisition as search doesnt work being a very new system. I was trying t

  • Standard Workflow for ESS changes.

    Hi Experts, We have a requirement where we need to change the Employee personal data and it has to be approved by the manager and then update the database. We can do it by custom workflow, but is there any standard workflow template for this process

  • VF06 - Background job

    Hello Experts, We are having a requirement to consolidate the deliveries with same PO into a single billing document. > For this, we have created a custom copy control routine and added customer PO to the ZUKRI field. This is working fine in VF01 or