Node display off ,  Central data cache configured but not active while tryi

Hi
We get an error "Node display off ,  Central data cache configured but not active" in Central system while trying to display the monitored the abap instance of system.We just completed the CCMS configuration.
Agent regristration is complete in monitored system and it is running fine.connection from central to monitored (abap instance) system is also ok.Please help asap.
Operating System --AIX
Sap version--ECC 6
Database-db2
Regards
Chamba Shashi
Edited by: SHASHI SAMAL on Apr 28, 2009 6:25 AM

Hi,
central data cache to improve the performance of the Alert Monitor when creating the alert monitoring trees.
Check [This link|http://help.sap.com/saphelp_sm32/helpdata/en/de/13622d770b5e4f8398fc536b690e93/content.htm]
And [This link|http://help.sap.com/saphelp_sm32/helpdata/en/10/75ea3b6d73e807e10000000a11402f/content.htm]
Hope this solves your problem.
Feel free to revert back.
--Ragu

Similar Messages

  • Node display off , Central data cache configured but not active

    Hi
    We get an error "Node display off , Central data cache configured but not active" in Central system while trying to display the monitored the abap instance of system.We just completed the CCMS configuration.
    we are getting this error in RZ20 (central system)
    Agent regristration is complete in monitored system and it is running fine.connection from central to monitored (abap instance) system is also ok.Please help asap.
    Operating System --AIX
    Sap version--ECC 6
    Database-db2
    Regards
    Shashi

    Hi,
    central data cache to improve the performance of the Alert Monitor when creating the alert monitoring trees.
    Check [This link|http://help.sap.com/saphelp_sm32/helpdata/en/de/13622d770b5e4f8398fc536b690e93/content.htm]
    And [This link|http://help.sap.com/saphelp_sm32/helpdata/en/10/75ea3b6d73e807e10000000a11402f/content.htm]
    Hope this solves your problem.
    Feel free to revert back.
    --Ragu

  • Central data cache configured but not active

    Hi,
    I am currently at a customer site and am configuring the solution manager system as a CEN.
    The sapccm4x en ccmsr agents have been registered and memory has been allocated in the CEN system for the central data cache, but whenever I open a monitor the following message is listed at the top of the screen:
    Central data cache configured but not active
    Suggestions on how to configure this cache and the impact of not doing so will be rewarded.
    Regards,
    Sander

    Hi,
    central data cache to improve the performance of the Alert Monitor when creating the alert monitoring trees.
    Check [This link|http://help.sap.com/saphelp_sm32/helpdata/en/de/13622d770b5e4f8398fc536b690e93/content.htm]
    And [This link|http://help.sap.com/saphelp_sm32/helpdata/en/10/75ea3b6d73e807e10000000a11402f/content.htm]
    Hope this solves your problem.
    Feel free to revert back.
    --Ragu

  • CCMS Monitor(RZ20) - Node display off

    Hello,
    I am unable to see the list of XI component from CCMS.
    Whe I am accessing Runtime Workbench-->Component Monitoring, I can see the list of Component i.e. IR, ID, IE,SLD etc.
    But when I see the same in Transaction RZ20, there is a node for Exchange Infrastructure, with 'node display off' information given just above the nodes.
    Is there some way that we need to activate the node before we can see the details of XI.
    Thanks
    Vijaya

    Hi Julia,
    Thank You for the Reply.
    Actually I was tring to do the same thing what was written in SAP Note as the same procedure is given in SAP Help.
    but when I try to create a entry from RZ21
    Technical Infrastructure>Configure Central system>Create entry for remote system.
    It gives an error saying 'NAJ is a local system ID'. I am trying to activate CCMS in my WAS client which is my Integration server. Is that a problem?
    Thanks
    Vijaya

  • Application monitor node display off

    Hi All,
    I am using SRM 4.0. Strangely I am running into lot of troubles in SRM since yesterday as there was a mess up in the batch jobs.
    Now, we are having an issue with Application monitor. It is not showing any error message in ITS, but I could see some error messages in RZ20. In ITS, when I click on "Display all" under purcashe order or confirmations in application monitor, it used to show the errors or it will say no error. But now it is showing GUI - RZ20 screen with a message "Node Display off".
    I have tried by restarting the Application monitor, but it didn;t help.
    Could you please help me to fix this?
    Thanks,
    Arun

    Hi,
    Please refer to the following SAP OSS notes ->
    Note 135503 CCMS monitor arch: meaning of profile parameters
    Note 781100 CCMS: Too many nodes/too little memory during KMC monitoring
    Note 623164 CCMS: Error if alert/MONI_SEGM_SIZE=0
    Note 731165 RZ20: CCMS parameters for segment control
    Note 110368 FAQ - CCMS MONITORING INFRASTRUCTURE
    Note 509524 RZ20: Methods do not start
    Note 382769 RZ20: Error messages do not generate any Alerts
    Note 705569 BPMon: Important Msg's in Activation and Generation Protocol
    Note 807072 DataSources for ABAP and distributed statistics data
    Note 746193 RZ20: Generating all-clears ("green alerts")
    Note 783725 EP6.0 CM & Collaboration SP2 Patch 27
    Note 441768 - Displaying canceled shopping carts in monitor 3.0 and 3.5
    Note 395699 - Display shopping baskets with status 7 in the Monitor

  • My iPhone 4 just suddenly deleted all my contacts ? I turned my phone on off and some came back but not all of them ??

    I was using my iPhone got a text opened in and all my contact names had gone went into my contact and it had deleted them all . I turned my phone on and off and 100 came back but not most off them what do I do ?

    I suggest you immediately make a backup of your data. You don't know if or when the computer will show some symptoms from the drop. You may want to, for piece of mind, take the computer to an authorised service center for assessment. No one here can assess any internal damage you may have done.

  • How do you know what the data usage was for and why?  It shows you date and usage but not the reason.

    How can you see what data usage was for on the bill?  It only shows the date and usage but not the reason for the usage.

    You can not see this info on VZW's site. There are apps for smartphones that will break down the info though, but by site or what was downloaded

  • How come I can print off the Apple support page but not of my note book i n documents.

    How come I can print off the Apple support page but not off of note pad in my documents.

    No. It is not free unless the phone was originally purchased less than 90 days ago or you have an active AppleCare agreement.
    Where did you get the phone? This is almost always a symptom of a phone that was hacked or jailbroken to unlock it.

  • When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

    when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on.  When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back.  I never noticed this with os leopard, Just after i installed os snow leopard.  All software is up to date only I think, thanks to apple they droped support for logic express.  Thanks for any suggestions.

    Does toggling CC off & back on bring it back?
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Request Membership is display in context menu aber this is not active!

    Hello there,
    I've created a Room(Restricted Room).(with the Administrator role)
    I logged on as Enduser.
    I can see all of the existing Rooms in Room directory.
    I try to request membership to one of the rooms(all the existing Rooms are Restricted).
    I see in contextmenu request membership, but this is not active!
    Have someone please an idea, how can i solve this?
    configuration issue???
    Thanks in advance
    best regards
    Katayoun

    Hi Robert,
    Portal Version is NW04s and SPS 14.
    And light Room Directory is active.
    I've tested, with annd without Light Room Directory, Context menu displayed Request Membership but not active!
    hope, Everyone hat an IDEA!
    Thanks in advance
    Katayoun

  • The option 'Display Credit Balance with negative sign" was not activated.

    I've encountered with a huge problem after load opening balance.
    I forgot to tick the  option 'Display Credit Balance with negative sign"
    It makes my client's Chart of Account  uncommon such as credit balance in Cash Account, AR .....
    However, I've search the sap  note to solve it  as follow:
      Description of the bug::     
    When creating the company in the system the option 'Display Credit Balance with negative sign' was not activated.
    Once transactions were created in the system the functionality can not be changed.
    Limits of the query:     
    After running the update query, please restart SBO first and then   run the restore 'GL account and bp balances';
    otherwise, the cashed value of SBO will not be updated and restore function may not take effect.
    1. Meaning of  restart SBO => restart SBO Service Manager right?
    2. Please help me please to find "The restore G/L account and bp balances" form.  Where is it?;
    Thank you

    Hi,
    I would think that you are following the PEQ instructions for note 970813, correct?
    If this is the case and you are using 2007 then you will find the restorev in the top menu; Help -> Support Desk -> Restore. You will find the functions here. Please note that this should only be used on direct instruction from support or a note like in this case. A backup should also be taken before running restore.
    Regards,
    Jesper

  • My friend has lost his iPhone 5.on find my iPhone when entered id and password app says id is valid but not activated. What should I do to find that lost iPhone

    My friend has lost his iPhone 5.on find my iPhone when entered id and password app says id is valid but not activated. What should I do to find that lost iPhone

    If Find My Phone has not been activated on the iPhone before being lost there is nothing more that you can do to locate it with iCloud.  The only option is physical search for it.
    If you have an idea of the location, call the iPhone and see if you can hear it ring.

  • I have a MacBook Air with OS X Yosemite 10.10.2. The "cut" function is available in "Edit" but not active upon any file selection. What to do to have it active?

    I have a MacBook Air with OS X Yosemite 10.10.2. The "cut" function is available in "Edit" but not active upon any file selection. What to do to have it active?

    You cannot; it's intentionally disabled to guard against accidental file loss. If you press Option when pasting the files, they'll be moved instead of copied.
    (123543)

  • Run NXtest will get a Warning will appear saying that Data Execution Protection is not activated in Win8.1 OS.

    Hi I'm Notebook SW compatibility engineer. When We test NXtest function has some question need your feedback.<o:p></o:p>
    Step as below<o:p></o:p>
    Open System Properties | Advanced | Performance Options | Data Execution Prevention. 
    Set the Option to 'Use DEP for essential Windows programs and services only' 
    Then run NXTEST tool will get a Warning will appear saying that Data Execution Protection is not activated in Win8.1 OS. 
    Can you help to confirm this result is correct or not? <o:p></o:p>
    Thanks and wait your feedback~~

    Hi Thanks
    I can see "Your
    computer's processor supports hardware-based DEP." as your attached picture.

  • I deleted all of my photos and even turned off backup data for icloud, but it still says that i am using 4 gigabytes of photos storage.

    I was going through my phone trying to get more storage because i only had 90 megabytes left. So i saw that i had 4.7 gigs of photos on my phone. I backed up all of my photos onto my PC, and then deleted them off of my phone. But it still said that i had 4.7 gigs of photos. So i went to icloud storage and turned photos off for it, but it still said that i was using 4.7 gigs of photos. could someone please help and tell me why this is happening and what i can do to fix this? thank you. I am using an iphone 5s with ios 8

    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.
    If you have not yet Emptied the Trash:
    Recover Files in The Trash
    If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location.  OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
    If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone.  Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.

Maybe you are looking for