Noip2 can't get my IP when run automatically after booting

I'm trying to set up a VPN and I use the noip.com service. I use the "noip" package to update my hosts.
If I run it manually with systemctl start noip2, it works fine and my host is updated properly.
If I set it to be run after booting with systemctl enable noip2, it doesn't work and gets caught in an endless loop that looks like this:
Mar 28 19:44:07 eee systemd[1]: Started No-IP Dynamic DNS Update Client.
Mar 28 19:44:07 eee noip2[154]: v2.1.9 daemon started with NAT enabled
Mar 28 19:44:07 eee noip2[154]: Can't gethostbyname for dynupdate.no-ip.com
Mar 28 19:44:07 eee noip2[154]: Can't get our visible IP address from ip1.dynupdate.no-ip.com
Mar 28 19:49:07 eee noip2[154]: Can't gethostbyname for dynupdate.no-ip.com
Mar 28 19:49:07 eee noip2[154]: Can't get our visible IP address from ip1.dynupdate.no-ip.com
I suspect this is because the network isn't ready by the time the noip2 service is launched, so it can't resolve the updater domain name. However, I don't understand why, after five minutes, it still can't resolve this domain name. I can ping it just fine.
Any ideas are more than welcome

Okay, so how are you starting your internets? Is it with a wired conenction, or wireless? Netcfg, dhcpcd, NetworkManager, wicd, do you send carrier pidgeons back and forth?
If it requires that you have an active connection when it starts, maybe you should try using NetworkManager's service that waits until it is online before it notifies (creatively named NetworkManager-wait-online.service). I think that what this does is it delays the completion of the network.target until after this service starts. So if you have noip.service be "After=network.target" then the IP should be resolved and ready to go.

Similar Messages

Can I get magic move to operate automatically after a build out?

Can I get magic move to operate automatically after a build out? I don't want to using timing as the presentation is not static.
Thanks..

Welcome to the forums!
In the Slide Inspector, in the Transition tab, use the Start Transition dropdown menu to select "Automatically". The transition will then start after the last animation on the slide.

Can't get the software to run/install after downloading for HP Support site.

I have window 8 OS and recently purchase a HP Ofiicejet J4680 printer(All-In-One). The software CD for the print was only for window OS 2000, XP and Vista. I went to the HP support site and it had a software download for my OS. But after I downloaded and tried to install I got nothing. When I click run/open it shows "Extracting". Once it finishes extracting it just close and I can't find the .exe/setup.exe to run and install software. What am I doing wrong?

Hi,
Your printer is on the following list:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03168175
Please try to download a tool (on the first screen) and run it on your Windows 8 computer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have a I-mac that is not able to upgrade the os past 10.7.5, when I go to upgrade Pages it says i have to be running os 10.10, how can I get Pages that will run with os 10.7.5.

I have a I-mac that is not able to upgrade the os past 10.7.5, when I go to upgrade Pages it says i have to be running os 10.10, how can I get Pages that will run with os 10.7.5.

Click here and follow the instructions. If they’re not applicable, buy an iWork 09 DVD from a source such as Amazon or eBay.
(116937)

How can I get PSE12 Trial Editor to start after icon is clicked, when Organizer runs ok?

How can I get PSE12-Trial Editor to start, after Editor icon is clicked, although Organizer runs? The wait or loading icon or message runs for about 60 seconds, then disappears and actual load and run of Editor space never occurs.
Can you help?

It must be on your iPad somewhere. Pull down on the center of your iPad screen to bring up spotlight search at the top. Enter Starz in the search box to see if the app is located below it. If it is, and is "hiding" inside a folder, the name of the folder it is in will appear to the far right.

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

I Lost my iphone how can i get it back when i havent turn on find my iphone i have already log in icloud and still have account and password

I Lost my iphone how can i get it back when i havent turn on find my iphone i have already log in icloud and still have account and password

Contact your carrier and the police. If it was lost in a specific building, ask the people running it.
(124410)

My macbook pro gets very hot when running anything like games or videos

I just bought a macbook pro 2.3 GHZ i7 with retina display. It gets very hot when running just about anything of substance. When I run a game like candy crush, the temperature can get to 167 or more. I installed istat menus and started monitoring it. I did notice that the fans never went on but after istats I was able to make them come on. Without having a game going, the temperatures hover around 100. Once the game starts, it goes crazy.
I don't really know what the problem could be or if this is normal (it really can't be....This is way too hot). I have owned the computer for about 2 months and I need to know what to do.

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

How can I get my games to run smooth with apple tv. I'm getting jerky movement

How can I get my games to run smooth with apple tv?

Check your network for interference (www.istumbler.net, check router manual in regards to changing channels) and other activities possibly running in the background.

How can I get an mp4 video running on iPad Mini?

How can I get an mp4 video running on iPad Mini, which is already in the iTunes File?

Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
 Cheers, Tom

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

How can I get my macbook pro running Lion to print on my HP photosmart 309a??

how can I get my macbook pro running Lion to print on my HP photosmart 309a??

Did you install the drivers? Or have Software Update install them? This printer is supported:
http://support.apple.com/kb/HT3669

I get no audio when running news videos from home page

I get no audio when running video on firefox but everything works correctly using explorer or opera

Hi coyote6014,
It could be a couple of things. You might have accidentally muted audio for Firefox. The article Knowledge Base article [[No sound in Firefox]] will show you how to check.
If that doesn't work, you should look at [[Video or audio does not play]]. This will show you how to troubleshoot any plugin/extension issues that might be impacting your system.
Hopefully this helps!

Is it normal for the 4s to get kinda hot when running apps/ video recording?

Any know? Hope it's not a hardware issue.

It's normal to get pretty warm when running hard, i.e. video or some apps. If it gets too hot to touch, that's not normal.

How can I get firefox to shut down automatically when not in use for an hour

How can I get firefox to shut down automatically when not in use for an hour

Sorry, there is no feature for that built into Firefox, and I haven't seen an add-on to add that feature to Firefox.

Noip2 can't get my IP when run automatically after booting

Similar Messages

Maybe you are looking for