Noise from Hard Drive

I just had to have the Logic Board replaced at the Apple store in Madison. Seems to be working OK but the drive sounds like it's grinding.It's loud enough that it's no strain to hear it. I've never had any noise with this computer at all. My problem is that AppleCare only has 2 months left. Should I re contact Apple with this?

HI George,
Absolutely. Don't hesitate. That's what AppleCare is for.
Carolyn

Similar Messages

  • Constant Fan Noise from Hard Drive

    My power book runs with a constant 'fan' like noise from the hard drive (front left of pd)
    My friend has same machine and has No sound,
    checked with display models in Apple Store (ear right necxt to pb) - No sound
    I have had this low level noise from new.
    Anyone else have the same problem.
    John

    hello there!
    When I upgraded to 1.4.0 and I notice that ear piercing noise and it was quite annoying. I called Apple and they advised me to look into the activity monitor. And YES, it ws the anti virus that came with .mac that 1.4.2 for some reason did not like and the process was running for such a long time consuming the resources including of course HD. I removed the anti virus (which at this point was useless) and the machine was just wonderful again.
    I think what I may say is that you may want to look for a process (using the activity monitor) which is eating the cpu alive - if you can remove it the better, else try to deal with. Good luck - an OSX convert!

  • Chirping Noise from Hard Drive Causing iMac to Freeze Up!

    Hope someone can give me some pointers to figure this one out!
    The computer will begin making high-pitch, squeaky chirping noises from the upper left corner (near the hard drive I think):
    http://homepage.mac.com/adamntaya/.cv/adamntaya/Sites/.Public/Chirping%20Noise.m p3-zip.zip
    Then after a while it will totally freeze up and I have to reboot. It is happening more and more frequently. Already tried doing a Hardware Test, with good results. Already tried downloading MacJanitor. Already tried a PRAM Reset. Nothing has helped the problem yet.
    What can I try?
    iMac G5 20" 1.8 GHz   Mac OS X (10.4.4)   160MB HD, 1G Memory (1st Gen)

    I had this exact problem, (exactly the same sound) with an eMac I had about a year ago. Our situations were the same, and after many calls and hours talking to Apple I got wound up getting a new iMac to replace to eMac, just paying the difference. They first wanted to take the computer in, which is what will happen when you call, but I would say that you would like to have a new one sent to you, as I assume you ordered it offline. Your problem and the one that I had seem to be quite rare, but nonetheless you should get a new computer.

  • Clicking noises from hard drive

    I have just bought an new mac mini and the hard drive is making random soft clicking noises.  Should this concern me?

    Check (Verify) the disc with utility disc.
    If you have doubts let an Apple Store check it and remember you can replace it without questions before 14 days after purchase.

  • New T500 Grinding Noise from Hard Drive

    My brand new T500 Hard Drive makes off and on very faint grinding noise. The grinding happens for 6 times and then goes away for 5-10 seconds and then happens again and so on.
    Is this normal or is my new hard drive defective, and should I ask Lenovo for a replacement hard drive? 
    I ran the lenovo hard drive diagnostic tool and it did not find any issues.

    Fortunately Dell has released firmware update DE17 for the following Seagate models that seems to work for my Lenovo:
    ST9120411ASG
    ST9160411ASG
    ST9200423ASG
    ST9250421ASG
    ST9320421ASG
    ST980411ASG
    http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R211337&SystemID=P...
    Save the download to your desktop, then extract the files. Save image of ISO file thru Roxio cd maker to a CD. Shut down the pc, restart, F1, goto startup and select CD0  drive, hit F10 

  • Strange clicking noise from hard drive

    My drive just started making this noise in my MBP today. Never heard this before. My drive has always been very quiet. Now ever couple to few seconds I'm hearing this click-like noise. No performance issues yet but I work on computers for a living and noises like this are not good. I'm almost certain my drive needs to be replaced and I don't want to wait until it fails. That is not an option.
    Anybody have this problem and have their drive replaced to fix the problem?
    BTW, mine is also the Fujitsu 120 GB drive.

    Sounds like an issue i had with 2 other drives in my old comp.
    Bad blocks/sectors turned out to be the problem then.
    Fix: backup all your data, boot up from the OSX dvd and open Disc Utility.
    - Select the "Erase" tab and click the "security options" button below.
    - Select the 2nd option "zero out data" then go ahead and erase.
    This will mark all bad blocks on your drive and tells the OS not to use those sections of your drive. Once finished, if this turned out to be the problem, the drive won't make those noises anymore.
    Some people say once a drive failed due to bad blocks it becomes less reliable, some say this is not the case... I leave it up to you if you still trust this HD after (if) this has been fixed.
    Before doing this i suggest running maintenance apps like DiskWarrior and TechTook Pro to see if other problems might be the cause.
    Btw, the zero data procedure takes quite some time with large drives, you might want to go grab some lunch and a movie while you do this

  • Noise from hard disk

    Hi, everyone.
    I bought a new mackbook pro in this Jan. Recently, I hear some not continuously noise from hard disk, especially when i open a file in hard disk or verify the hard disk. Is something wrong with my hard disk?
    Thanks

    This hard disk clicking is a know problem for many laptops. If you search it on Google, you will find a lot of discussions about it in the Unbuntu Linux forums. In most cases, it is due to the Advanced Power Management (APM) feature of notebook hard drives. The default APM settings of these drives are aggressive so as to extend notebook battery life. As a consequence, the HD tries to park its actuator head to the ramp whenever it judges the system as idle. However, OS X or some third-party applications may access the hard disk quite often, resulting in a park/unpark cycle every few seconds.
    Every of these cycles is counted as one load/unload cycle. Most notebook drives support up to 600,000 load/unload cycles. If a hard drive parks its head every few seconds, it may shorten its life by "using up" the cycles more quickly.
    I had the same problem on my Powerbook with a Hitachi Travelstar 5K160 80GB PATA drive. I heard the frequent clicking sound right after I installed it into the laptop. The SMART status appeared to be Verified, and there was no problem with the drive itself. After searching on Google and Hitachi web site, I found the causes and solved the problem using the Hitachi Feature Tool. For other HD brands, I have no experience at all.
    Basically, Travelstar 5K160 drives have three idle modes, from which a user can set one as the deepest idle state:
    1) Active Idle: the actuator head is parked near the center of the disk, and power usage is 45-55% less than performance level. Recovery time to active mode is about 20ms.
    2) Low Power Idle: this is usually the factory default idle mode. The head is UNLOADED to the ramp and the power consumption is 60-65% less than the performance level. Recovery time is about 300ms.
    3) Low RPM idle: in this idle mode, the hard disk will spin down to a lower RPM speed. More power is saved but recovery time is much longer. (I can hear the disk spin down and spin up again a few times per minute. There is also a lag in system reaction time.)
    To get rid of the hard disk clicking, you need to set Active Idle as the deepest APM idle mode. To do it on a Hitachi hard disk, you need Hitachi Feature Tool, and a Windows laptop with the same HD interface as your drive (PATA or SATA). Sadly, the feature tool is only for Windows and Linux.
    You can download Hitachi Feature Tool 2.10 as an ISO image here: http://www.hitachigst.com/hdd/support/download.htm#FeatureTool and burn it into a bootable CD. The userguide of the tool is available on the same page.
    Then, take out your hard drive from your Macbook and install it into a Windows laptop. Boot the machine using the Feature Tool bootable CD. Choose "Change Advanced Power Mode" from the drop-down menu.
    The default value is 128 (Low Power Idle). Just increase the value toward Performance, until you see the APM mode over the value bar becomes Active Idle (starting from 192). Click OK and Exit the feature tool. Switch off the Windows laptop and take out the hard disk. Install it into your Macbook. You will not hear the clicking sound again when system is idle. The lowest APM mode will be Active Idle and hence the drive will not park its head to the ramp during operions.
    If your hard drive is a Hitachi Travelstar 5K160, you can find the 5K160 specifications version 1.1 from Hitachi web site. On page 69 of the document, it explains the APM idle modes. On page 145 about the register values of the APM modes.
    To set Active Idle as the deepest idle mode may adversely affect battery life. (I haven't yet tested it myself) However, there seem not to be a big difference than the Low Power Idle, according to the datasheet of 5K160. For this model, power consumption of Active Idle is 0.8W, while that of Low Power Idle is 0.6W, on average.
    Hope this is helpful.

  • Music from hard drive to new iTunes account

    I have just set up a new iTunes account for my mum on her new windows laptop it doesn't have a cd burner so have copied some of her CDs onto a external hard drive however having trouble transferring music from hard drive into iTunes any suggestions?

    Moving iTunes Music from one computer to another or an external drive - http://docs.info.apple.com/article.html?path=iTunesMac/8.2/en/15475.html and HT1449 - http://support.apple.com/kb/ht1449

  • Recovery from hard drive

    I was instructed to reset my notebook to repair fingerprint device.
    Thought I had backup of data on external hard drive, but not.
    Computer illiterate, but wanted to know if it is possible to recover data from hard drive?
    Thanks

    Hi,
    Please check professional services in your area, normally they charge few hundred dollars depending on recovery rates but never get 100%. There are few tools such as:
        http://www.easeus.com/datarecoverywizard/recover-f​ormatted-partition.htm
    You may want to try yourself.
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do i load music from hard drive to my ipod?

    how do i load music from hard drive to my ipod? I had to reset my ipod and it blew away all my music. I have a ton of music on my computer hard drive but haven't figured out how to get it to my ipod.
    Thanks

    Sync it.
    Open itunes, connect ipod, select what you want, sync

  • How to install arch 2009.08 from hard drive? Please enlighten me

    OK, I admit I am impatient for the installation from the CD drive. Whenever possible and whatever distro I wanna try, I head first to try to install it from the hard drive. I don't remember how many times and how many distros I have done the same to, ubuntu, zenwalk, sidux, fedora, opensuse and of course arch. It rarely failed as long as I followed someone's guide, sth like "install any OS from hard drive", I do not exactly remember. And I did the same in the past with arch. But after 2009.08, it simply didn't work. I've read the article "fast install arch from existing linux system" in the wiki, it didn't work either (by the way, if someone can solve my problem, I think the article should be updated). After it boots, at some stage, it says "Use Hook [archiso]", then tell me "waiting for /dev/archiso for 30 seconds ..." then when the time due, it throws me into a ramfs shell. I've hacked for a long time, but no luck. Then I went back to download the 2009.02 iso, however, it works flawlessly.
    I did find some differences in the menu.lst/isolinux.cfg between two version.
    In 2009.02, we have
    title Boot Arch Linux Live CD
    kernel /boot/vmlinuz26 lang=en locale=en_US.UTF-8 usbdelay=5 ramdisk_size=75%
    initrd /boot/archiso_pata.img
    While in 2009.08, it is
    title Boot Arch Linux Live CD
    kernel /boot/vmlinuz26 lang=en locale=en_US.UTF-8 archisolabel=ARCHISO_AHCOHH6O ramdisk_size=75%
    initrd /boot/archiso_pata.img
    I know I can install arch from usb, but I simply wanna know what's wrong here, so guys, if you have any idea, don't hesitate to enlighten me.

    Hi, vacant, thanks for the reply. I did not notice you are the author of the article. Actually I missed the head of the article which directs me to another (the amalgamated one you mentioned). I take a look at it, it seems to make things complicated. I still miss the old days: you simply download the iso, mount it and copy all the contents into a separate partition, edit your current grub, then reboot and everything works. I don't understand how Arch could be so evolved to exclude this simple installation scheme. I am not complaining the development of Arch. In my opinion, a distro as flexible as Arch should provide as much installation strategy as possible. In this respect, I think we can learn from Ubuntu or sidux (in sidux, it provides a very convenient kernel parameter called "fromiso" which allows you to install sidux from the plain iso, that means, you even don't have to mount it and copy the contents out of it to a separate partition).
    Last edited by plmday (2009-10-25 06:25:44)

  • Deleting from library does not delete from hard drive????

    itunes support states when deleting from library, it should prompt to remove from hard drive. i am not getting this prompt. i cannot find a setting that changes this either. please advise
    thanks,

    It only deletes it from the hard drive if it is in the iTunes Music folder path;
    Look at your itunes menu > Edit > Preferences >Advanced tab.
    "itunes music folder location"
    For example, say it is set to C:/Music. If you delete a file from the itunes library list that exists in C:/Music you'll get asked if you want to keep or delete the file.
    If you delete a file from the itunes library lists that exists in C:/SomeOtherFolder, it will not get deleted from the hard drive.

  • DELETING FROM HARD DRIVE ( USING AN APPLE)

    I had a hard time at first to figure this out.
    Flag pictures with an X
    Message - Delete the rejected master photo from disk or just remove them from lightroom.
    Choose - Delete remove from dick.
    Secret !!! to remove from Hard Drive (you must empty trash)then they are removed
    Good Luck,
    Rick Rickard

    This is pretty standard behavior on a Mac, and it provides you wil another chance to reconsider esp. if you learn that you've trashed a whole folder instead of one image.
    You can also just hit delete from a folder view and get that dialogue.

  • HELP moving photo's from hard drive with aperture to hard drive with iphoto

    I was trying to move the photo's from hard drive a with aperture to hard drive b and start using iphoto but I have had no luck. In aperture when I select relocate masters a error comes up and say's: unavailable master images cannot be relocated. Either offline or not found. I originally had the masters on a external hard drive, when I got divorced my ex took the external drive for her mac. I am able to view the photos but I don't know how to move them. Thanks

    I think you're missing the point - it's a question of where the images are, and it sounds a lot like the images are on the hard disk you used to own.
    Managed = you keep the images in the Aperture library
    Referenced = the images stay where they are on the hard disk and they're indexed in the library.

  • Start up issue with clicks from hard drive

    My Macbook Pro 17" with Maveric does not load beyond grey apple logo during start up and has intermittent clicks sounding from hard drive. I've tried the following to resolve:
    1. Removed and reinstalled the RAM modules followed by clearing the PRAM on restart... ineffective.
    2. Restarted holding the option key. This showed my 1 year old hard drive was still available. However, selecting it resulted in the same failure at the grey apple logo.
    3. My previous Snow Leopard Recovery disc also ineffective. The eject button does no eject the disc either.
    4. Target disk mode also fails.
    5. Remote Recovery start up (command R) hangs on spinning wheel.
    Please advise.

    You may have to resort to using something such as DiskWarrior or Data Rescue 3 to try an repair the drive to the point where you can recover some of your files.
    I assume that you have no backups?
    Clinton

Maybe you are looking for