Nokia E61i shortcut keys problem

Hello
I have Nokia E61i and have a problem with shortcut keys.
My contact, mail and own key stops working after some time. I need to reboot the device to get the functionality back. Does any one know how to fix the problem? It is very annoying to reboot the device every time the keys stop working.
I have the latest firmware loaded
Version: 1.0633.22.05
Please let me know if you need additional info.

In my case, I have the latest firmware. However, I think I found what is causing my problem. I read in another thread somewhere that 3rd party alarm programs cause the problem. Sure enough, when I disabled my 3rd party alarms, my buttons remaind usable. When I set a 3rd party alarm off, the buttons became nonfunctional.
Whether this is a bug in the alarm program or in the system function calls of the Symbian OS, I don't know; however, I do at least know how to keep my buttons functional. Now only if this bug could be fixed...

Similar Messages

Nokia E61i and iSync problem - Please help!

I had the Nokia E62 and I was syncing with my macbook pro without any any problems. Last week I got the Nokia E61i and installed the plug-in for the isync from the nokia website. I have been unable to sync the 2 phones. I have deleted the phones from isync and reset the phones but no luck. I have tried both bluetooth and cable. The isync connects to the phone but give me an error message - "An unexpected error occured. Device 'Nokia E61i' synchronization failed"
Please I need someone to help me resolve this problem.

This Apple Tech Support Document seems to mention exactly your error:
iSync: Error message when synching phone via Bluetooth in Mac OS X 10.4.9 or later

Nokia E6: Shortcut key to emergency numbers

Hi, I had received a letter of advice (you can call it a letter of warning) from the local authority on nuisance calls made to the local emergency hotline. There had been a few instances of this issue happening, and I would like to find out if there is a shortcut key. I had the latest happened to me again yesterday and I think the local authority will be writing to me again very soon. I would like to do either of the following:- 1. Change the local emergency number to a invalid entry so that it shows up an error whenever I try to call. 2. Disable the emergency call totally 3. [last resort] get local mobile service provider to bar all emergency calls made from my phone Can anyone advise how 1 and 2 is to be done? Am not sure if the local mobile service provider will bar emergency calls... I appreciate any advice that you may have for me. Thank you.

Hello.
Most phones will dial 911 and 112 even if your keyboard is locked.
The 1 to 9 numbers of the keypad can be programmed to dial a number if you press and hold one of them.
If you try to mantain your keyboard locked and inside a case instead of the pocked there should not be unintentional calls.
Greetings from Paraguay.
Claudio Bogado Pompa.
Greetings from Paraguay.
Claudio Bogado Pompa.

Nokia E72 : shortcut key to start music player?

Hello,
Is there a shorcut key on the querty keyboard for starting music player in Nokia E72 ?
Thanks
Venks

No.
But you can reprogram one of the one-touch keys so that, for example, a long press on the "contacts" key fires up the music player.
Menu > Ctrl. panel > Settings > General > Personalisation > One-touch keys
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Nokia E61i battery problems

Hi.
I have a nokia e61i.
Recently the battery goes down every day between 3:30 pm and 5 pm.
I changed the battery and the same problem occured.
For some time now I can see a cell indicator next to the battery indicator on the right.
Can anyone tell me the reason for the above two issues?

Remove the battery for a couple of minutes.. Insert and try charging..
You may also try thru' another Plug point for charging..
If problem remains then it may be with the Charger or the Phone.. Try another compatible / recommended charger if you have access to it.
BTW was the battery totally dead when you stared charging ? If so, leave it on charging..The battery bars may be visible only after a few minutes of charging in that case...

Hellp on Nokia E61i associating with Cisco WLC 4402

I met some problem with associate Nokia's dual mode mobile phone E61i with Cisco WLC 4402, hope someone can help me on it:
I setup a VOICE WLAN in 4402(v5.0.148), Layer2 security is WPA1+WPA2, Key management using 802.1x, WPA1 policy enable both TKIP and AES, Radius server using ACS engine(v4.1.1.23)(enable PEAP-MSCHAPv2);
I can use my laptop to join this WLAN(my laptop configure with PEAP/MSCHAPv2, WPA-TKIP, not validate server certificate), but can't let E61i join it, each time it will remind me âunable to connect, WPA authenticate failed).
In E61i, I select WPA/WPA2 as WLAN security mode, enable EAP-PEAP, under EAP-PEAP, I enable EAP-MSCHAPv2; however under Cipher, there's a lot of options such as âRSA,3EDS,SHAâ, âRSA,AES,SHAâ, but there's no TKIP, I have tried to enable all of them and tried only enable those items which include AES, but I failed each time with the same reminder âunable to connect, WPA authenticate failedâ. I checked ACS's failed log, there's no record; In 4402, there also have no record.
If I change the security to open or static WEP for VOICE WLAN, then the E61i can connect to the WLAN.
I think the problem maybe relate to encryption or certificate, right now I just do the test in lab, not in customer's real environment, so I use ACS to generate a self signed certificate and installed it in ACS.
Pls. help to point me what I need to adjust to make it work. Thanks!

Hello,
CCKM Key Management mode on Nokia E61i phone can be used
against Cisco LWAPP AP's with TKIP encryption
Nokia E61i (and other E-series WLAN enabled phones) are supporting CCKM key management method with both dynamic WEP and TKIP ciphers.
On the phone configuration, 802.1X security mode needs to be in use in order to enable CCKM support.Â WPA/WPA2 security mode on the phone is dedicated to standards basedÂ WPA and WPA2 methods and it does not allow usage of proprietary CCKM key management method.
Phone's 802.1X security mode does not mean that phone would only support dynamic WEP encryption method in this mode although in contexts term "802.1X" may be attached to pure dynamic WEP (legacy / pre WPA era)security methods.
Â 802.1X security mode can be seen on Nokia Eseries phones as sort of an "everything with EAP based authentication is allowed" mode, meaning that following key management and cipher configurations are supported:
- WPA-EnterpriseÂ = WPA Key Management (EAP based authentication) with TKIP encryption
- WPA2-EnterpriseÂ = WPA2 Key Management (EAP based authentication) with AES encryption
- Mixed WPA/WPA2-Enterprise = I.e. WPA/WPA2 Mode Migration WPA2 Key Management (EAP based authentication) with AES (for unicast data) and TKIP (for multicast data) ciphers
- 802.1X dynamic WEP = legacy (pre-WPA era) 802.1XÂ based dynamic WEP (EAP based authentication with dynamic WEP encryption)
Supported:
- CCKM with WEP = CCKM Key Management (EAP based authentication) with dynamic WEP encryption
- CCKM with TKIP = CCKM Key Management (EAP based authentication) with TKIP encryption
Not supported:
- CCKM with AES = CCKM Key Management (EAP based authentication) with AES encryption
Please note that CCKM-AES mode (CCKM Key Management with AES cipher) is not working properly due to some incompatibilities between Cisco and Nokia implementations thus it must not be listed as a supported combination on the current Nokia E-series devices. We are also seeing CCKM-Fast
Re-authentication failures with Cisco autonomous AP's when AES encryption is used althoughÂ initial authentication to autonomous AP's is successful.Â Nokia is currently working with Cisco to get CCKM-AES based authentications and roaming working properly with both LWAPP and autonomous Cisco AP's.
Â Also note that Nokia E-SeriesÂ does not support Cisco proprietary CKIP/CMIC encryption/data integrity methods. CKIP/CMIC is supported at least by Cisco autonomous AP's and it seems to be available also
at least on LWAPP AP version 4.1.171.0.
Â CCKM on E-Series devices has been tested against Cisco LWAPP (ver. 4.1.171.0) and it works when TKIP encryption is in use (WPA Policy + TKIP encryption in Cisco LWAPP configuration terms).
In practice this means Cisco LWAPP is configured in a following manner: WLAN -> Edit -> Security->Â
Layer 2 Security = WPA+WPA2
WPA+WPA2 Parameters:
-WPA Policy = enabled
-WPA Encryption = TKIP enabled, AES disabled
-WPA2 policy = disabled
-Auth.Key Mgmt = CCKM
Br,
-Pasi-

Message ShortCut Key not working properly

Hellow every one, guys i am encountrying a problem regarding my nokia e5 , i've just bought it recently and still left with 8 months warranty. The problem i am facing is, the message shortcut key which is on the keypad of this Phone, is not working properly. When i do long press to open new text msg, it sometimes doesnt opens any thing and sometimes even open messaging and then close it. At a certain angle i have to apply a little more force in order to operate it properly. Please help me wheather its a hardware problem or any sort of dust particles have emerged inside the keypad resulting in loose contact of the button and the motherboard.
REPLY ASAP.

Hi Shanam,
Welcome to the forum
Thanks for joining the community, if you believe there is an issue with your device that is preventing you from optimizing all the options available to you.
I would advise for you to bring/ or send it for repair. Keep sending us your replies and comments on the forum.
Kind regards.
Carl
If this post answers your question, you can help others by clicking the green accepted solution' button.
Please ask your questions to the main board and not to my mailbox. Thank you.

Nokia E61i Lock code

Hey.
Many years ago i bought nokia E61i and i left it to stay. Now i wanna use it but i can,t. I tried many things: 1. hard reset (1,*, Okey button and power button,) . I have allso tried mastercode. Maybe someone knows other options to get off the security code.

> the ONLY solution is to get the code reset at Nokia Care.
How does Nokia Care reset the code? Key in a special reset code, shortcut somewhere on the motherboard or send a reset command via USB? Or speak "I am Nokia" to the phone?? :-))
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.

Satellite U400-12P - Multimedia Shortcut Keys illuminates 24-7

Hey everyone,
I am new to this forum and I hope someone will solve the problem I have.
I own a Toshiba Satellite U400-12P (been a year now). Past few days I have noticed that the multimedia keys (PLAY/PAUSE/FFD/RWD/) isn't functiong (doesnt respond to my touch) + multimedia keys illuminates 24-7;that is even if the computer is switched off the shortcut keys are shining brightly. I have no clue why this is taking place.
If someone has a solution to this. I shall greatly appreciate it.
Thanx

Hi every body,
Lately, am trying to light the multimedia keys, which i used to do it by touching the mute key,
but unfortunately the keys and even the word satellite and the light over the mouse are not lightning even though the ,mutimedia keys are working normally,
would you please support me how to light these keys again?
Thanks.

Shortcut Key in JInternalFrame

Hi,
I have an application that has multiple JInternalFrames displayed within split panes. I am trying to set shortcut keys to cycle through the visible JInternalFrame. I have a Menu Item oCycleWindows, on which I called setAccelerator() with Ctrl+Shift+M. In th emenu handler for this item, I have defined a function that checks the current focussed internal frame, and accordingly picks the next one to get the focus.
My problem is as follows: on clicking Ctrl+Shift+M, I am able to see that the next window has focus (the title bar color changes), but when I use the up/down keys to navigate within the newly focussed window, actually the navigation happens in the previous window....
I have a tree view at the left, and two views at the right, and going from the tree view to any of the right views sometimes works correctly, sometimes doesn't (in fact i believe this happens every alternate time I shift to the non-tree view). Here, I have tables in the right views, and I try to select different rows using up/down keys once the right view has the focus, but the navigation occurs in the Tree view, with previous/next node getting selected instead!
The funniest part is, the problem isn't there if the shortcut defined is 'F6', but for any other shortcut (F12, F11, Ctrl+M, Ctrl+Shift+M, Ctrl+K, CTrl+Shift+K etc.) this problem is seen.
Does anyone have ANY idea why this happens? I tried to look up the bugs DB, but couldn't find anything specific to this...
Sample Code:
JMenuItem oCycWin = new JMenuItem("Cycle Windows");
oCycWin.setMnemonic('C');
oCycWin.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_M, ActionEvent.CTRL_MASK | ActionEvent.SHIFT_MASK, true));
//oCycWin.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_F6, 0, true));
oCycWin.addActionListener(new ActionListener()
   public void actionPerformed(ActionEvent e)
      /* oCurWin is a JInternalFrame object (extended class) that tracks the
         current focussed window
      if(oCurWin.ID == 1)
        oCurWin.ID = 2;
      else if(oCurWin.ID == 2)
        oCurWin.ID = 3;
      else
        oCurWin.ID = 1;
      oCurWin.setVisible(true);
      try
     oCurWin.setSelected(true);
      catch(java.beans.PropertyVetoException e)
     System.out.println("Can select oCurWin");
});This code works fine for accelerator set as F6, and when we shift to the tree view. But sometimes on shifting focus to any of the right views, with accelerator not F6, although the right view appears to be focussed due to change in title bar color, the navigation continues in the tree view.
Thanks...
Shefali

Hi,
have you tried requesting the focus on your newly selected internal frame ?

Windows Shortcut Keys no longer working!?!

Hello All,
Framemaker 8(p277) has recently decided that after a period of use, standard windows shortcuts will stop working (ctrl+v / ctrl+c / ctrl+z!!! etc..) along with keystroke / character repeats.
This only occurs within framemaker. Windows short cuts and keystroke repeat still function correctly in all other apps running at the same time
right-clicking and selecting copy / paste / etc.. still works.
Un-installing and re-installing the most recent framemaker patch seemed to temporarily fix the problem, however, it has now returned.
I'm running xp Sp3, fully patched...
and the repetitious arrow-key bashing that I'm now having to do is slowly driving my co-workers INSANE :)
please help!
brad

Brad:
My experience with the problem is that it's been around since version 5 of the product.
I've observed that the problem seems to occur if I double-click on an embedded graphic, thus opening it in a third-party graphics program (PaintShop Pro 7). That is to say that on days when I don't work with graphics, I can run FrameMaker for hours and never have any CTRL key problems.
When the problem does occur, I must perform one of the following to restore function-key operation, in order of preference:
Exit and restart FrameMaker (easiest but doesn't always work)
Log off and then back in to Windows (somewhat more time consuming, works almost all of the time)
Reboot (time consuming, but always works)
That's my experience. Other forum regulars have had different experiences...
Cheers & hope this helps,
Riley

BUG: KEYBOARD SHORTCUT KEYS DO NOT ALWAYS ACTIVATE A SERVICE (A WORKFLOW)

BUG: KEYBOARD SHORTCUT KEYS DO NOT ALWAYS ACTIVATE A SERVICE (A WORKFLOW)
When you assign a keyboard shortcut to a Service (such as a Service Workflow created in Automator) using the System Preferences > Keyboard > Shortcuts, if that shortcut key combination includes the Command key, pressing that shortcut will always successfully activate the Service. No problem there.
However, shortcut key combinations that do not include the Command key (for example, the shortcut key combo Ctrl-Shift-D) WILL NOT activate the Service in any newly opened application, until you click on the Services Menu option in that application.
As soon as you click on the application's Services Menu, this seems to bind the shortcut key combo to the Service, and thereafter, that keyboard shortcut will activate the Service in that particular app. But if you then quit and reopen the app, you'll find the Service will once again lose its binding to the shortcut key combination and will thus fail to work again.
This means that shortcut key combinations such as Ctrl-D, Ctrl-Shift-D, F15, Alt-F15, etc are not really viable shortcuts for Services, because they will not work in any newly-opened application until you click on the Services Menu in that application.
This bug thus greatly limits the shortcuts that you can employ for Services, because you can only reliably use shortcut key combos that contain the Command key. This is a fault that Apple really needs to fix. This is a very old glitch: I notice it is present in Snow Leopard 10.6.8, as well as Yosemite 10.10.1.
This bug does not apply to application shortcuts, however, or to other shortcuts in the Shortcuts Preference Pane, just to Services shortcuts (including the Mac's default Services, or any Services you make yourself using Workflows on the Automator software).
To give some examples:
The following keyboard shortcuts for Services WILL NOT work until you click on the Services Menu in the application you are using (and they will cease working again when you quit and reopen the app):
Ctrl-X
Ctrl-Shift-X
Ctrl-Alt-X
Ctrl-Alt-Shift-X
Alt-X
Alt-Shift-X
F1, F2, F3, etc
So until Apple fixes this bug, the above type of key combinations, that do not contain the Command key, are best avoided as shortcuts for Services. It is particularly unfortunate that function keys F1 to F19 do not work reliably, as these would make great single-key shortcuts to Services.
However, the following sort of keyboard shortcuts for Services, all containing the Command key, once set up will always work without fail:
Command-Alt-X
Command-Ctrl-X
Command-Shift-X
Command-Ctrl-Shift-X
Command-Alt-Ctrl-Shift-X
Command-F1, Command-F2, Command-F3, etc
So all the above can be reliably used as shortcuts to Services.
Here X denotes keyboard keys such as A, B, C, 1, 2, 3, =, \, [, etc.
Note that even for keyboard shortcuts containing the Command key, you may very occasionally need to click the Services Menu to get them to work initially in an application (notably in the System Preferences application itself). But if this is necessary, it is just required once when they are first set up, and thereafter the shortcuts containing the Command key will always work without fail.
The above was tested on Yosemite 10.10.1, but most likely applies to other versions of OS X as well, as I believe this bug is an old one. This bug is definitely present in Snow Leopard 10.6.8, because I have observed this same fault in an old Mac I have that runs Snow Leopard.
I have reported this bug to Apple, so hopefully they will see my report and act upon it. However, it might be an idea if others also report this problem of Services shortcuts not working property, to ensure that Apple get the message. You can report a bug to Apple via their bug feedback page here.

Exactly where do you want to use a GO BACK "shortcut" in Bridge? Maybe I don't even understand what you mean by Go Back. Bridge is only a file browser, nothing more. It doesn't open, edit, manipulate or save files at all.
Are you simply referring to going back to view a folder that you viewed before?
Please don't take this a criticism. As someone who will gladly pay money not to have to learn any shortcuts at all, I'm just puzzled and curious, that's all.

Tab key used as the shortcut key when using a text entry box

When I use the Tab key as my shortcut key for a text entry box, it works fine in preview mode but does not work in the web browser preview mode. I have tried to understand how I can take an existing project that is built for web browser application and make the tab key work. The only thing I have been able to make my text feild entry take me to the next slide is to have the user click Enter instead of Tab and that is not the typical way we move between fields in the real application. So....simulations is not accurate. Can you give me step-by-step instructions on how to correct this problem in an already existing project?

I think that you need to disable "Seamless Tabbing" in your file for it to work when published.
You need to edit the HTML file that launches your course manually.
Open your HTML file in notepad or equivalent
Between the <object> </object> tags add:
<param name="SeamlessTabbing" value="false">
Save the HTML file again
/Michael
Click here to visit the www.captivate4.com blog

Brightness shortcut keys not working in Windows 8 or 8.1

I'm no longer able to use the brightness shortcut keys after I've installed the Lenovo power management tool in Windows 8 on a Ideapad U300s.
When the Lenovo power management tool is NOT installed on the system, pressing the shortcut keys brings up the Windows UI in the upper left hand corner of the screen and the display bridghness is adjusted accordingly.
However, as soon as the Lenov PM software is installed, the Windows brightness indicator shows up ONCE and I can no longer adjust the brightness with the shortcut buttons.

Welcome to the Apple Support Communities
At the moment, there aren't any Boot Camp drivers ready for Windows 8, so it's normal that you have problems. Wait until Apple updates Boot Camp drivers, normally with a OS X update

Differentiate between shortcut keys Alpha (keyboard) Enter and Number Pad (10 key) Enter

I need to be able to differentiate between the Keyboard enter and the 10 key enter (see image below) using a shortcut key in Captivate and/or Flash. These keys are used for two different reasons in the application that I am creating a simulation for. Using ENTER allows the learner to use either key to continue with the simulation. I would like to force use of each of these keys differently.

Hi Rastapote, and welcome to the HP Support Forums!
I understand that you are having a problem with the numeric keypad on your HP Compaq 6830s Notebook PC. This is a business Notebook and you would get the best answer to your question on the HP Enterprise Business Community forum as they deal with the Business products.
I hope this information helps.
Have a great day!
I worked on behalf of HP.

Nokia E61i shortcut keys problem

Similar Messages

Maybe you are looking for