Nokia MD-51W JBL PlayUp only works with old device...

I've got this portable speaker and have used it for a while with an older Bluetooth 2.1 + EDR enabled phone, now switching to newer phone and the speaker connects, but no sound coming out of the speaker. Tried with various Bluetooth 3+ devices like HTC One X, Iphone, Samsung GS4 and the speaker is not working with any of them. Since higher Bluetooth versions are backward compatible with lower versioned devices, it should not be any problem I think. Running latest software on the speaker (same one as it was shipped with, 0.63). Any chances to get the speaker working with newer devices?

lbcarv wrote:
I have the same problem, using Nokia Lumia 820 or iPhone4. No sound from the speaker, even in bluetooth, NFC or cable connection. Did you solve your problem???
Welcome to Nokia Discussions, lbcarv.
If there is no sound output coming out on all connecitivity mode, even on direct cable connection. I'd advise sending the device to the store of origin or to a Nokia Care Centre in your area.
Good luck

Similar Messages

Help my MBP 2011's USB ports only work with powered devices

Hey.
My USB ports are only working with powered devices ( such as an interactive white board) they are not working wiht a USB modem, it picks up but doenst have the energy to dial out. it also doesnt work with a flash drive.
this is only recent after i updated non vital programs such as printer things.
now the other problem is that i have not updated this too recently but i dont mind losing some info.
ps. i have done all of the restarts such as smc, ram. pram. the only thing i have not done is take out the batt. but thats becuase its really hard to do and there are warnings all over it saying dont remove.
p.p.s i am running snow10.6.8
Please help becuase i need it to help teach some of my stundets and not being able to use a USB or the internet to research is impeeding my planning.
Thanks so much in advance
Andrew

One final detail. it is a 2011 early model. if there is any more details that you want please ask. i am very desperate because i dont want to take it to apple unless i have to.

Canon Selphy CP-720 only works with old 10.5 Driver

I posted this to help others who have the same problem. The Gutenprint driver that comes with Snow Leopard doesn't work for the Selphy CP 720. I had to download the old Canon drivers from the Canon website (for Leopard OSX 10.5), then reinstall the printer.
1) Download from Canon
2) Install, then restart computer
3) Remove the printer from the list in preferences, then add again
4) Select the Canon driver (doesn't say Gutenprint in the name)
This was the only way to get the printer to work. I can't say whether it prints any worse in 10.6 since I haven't connected it to my Mac Mini running 10.5 to test, but it works. Hope Apple updates the list at least. I can understand if they don't want to add the driver since it is for Leopard, but it is better than a driver that does nothing.
Hope this helps others... it will probably work with many of the other Selphy models.

hi, i have a Canon Selphy CP750... the prescribed steps didn't work for me. The printer just says "No Paper", I tried downloading the driver for both 10.6 and 10.5, but still not working. The printer works fine with my old Windows based PC. Any other suggestions from anybody? Thx.

PSE 9 only works with old AIR version on Win 7 x64. Adobe please help.

I'm hoping that Adobe can jump in and help here as there are some real versioning issues with the components that PSE 9 uses. I've made a number of posts in the Adobe AIR forum (while I was figuring this out) and have exchanged with Adobe resources regarding my problems with Adobe AIR on Win 7 x64. They are still looking into it.
PSE 9.0 comes with
   Adobe AIR 1.5.3.9130,
     Adobe Community Help 3.2.1.650 (an AIR app), and
     Adobe Photoshop.com Inspiration Browser 3.07 (an AIR app)
That Adobe AIR 1.5.3.9130 is an old version of AIR. Since then there have been production releases 2.0.2, 2.0.3, and the latest 2.0.4. If you upgrade to ANY of those Adobe AIR 2.x versions on your Win 7 x64 system, ALL your Adobe AIR apps will stop working.
Adobe Community Help 3.2.1.650 is an out-of-date version and it continually nags you to update to the newer version. If you do that, the install will first upgrade Adobe AIR to 2.0.4 and then upgrade Help. Help will no longer work and all Adobe AIR apps will not work.
I have installed and uninstalled PSE 9 about 25 times, I have installed and ununinstalled different versions of AIR over 50 times, etc. etc. to come to these conclusions. I have tested Adobe AIR 2.0.2, 2.0.3 and 2.0.4 and NONE of them work on Win 7 x64.
I'd really like someone from the Adobe PSE team to look into this. I don't have time to spend hours on the phone with support. I have described the problem and can offer more details as necessary.
Thanks . . . . Brian

Ankush,
Thank for your two responses. I have also received some more emails from Chris Campbell around AIR in particular so I'll try to work with him first.
Thanks you for confirming that you do not see any errors after installing the updates. Also that Adobe Help and Inspiration Browser both work after updating AIR to 2.0.4.
I will answer your questions for now though:
1. You asked:
Have you tried this:
Uninstall PSE 9, PRE 9 and any other CS5 Adobe application.
Uninstall Adobe AIR.
Install PSE 9 and run the updates of Adobe AIR and now use the applications?
If it still gives error, uninstall Adobe AIR and then install the 2.0.4 version directly which is available on Adobe.com.
What happends now?
     Yes, I have done all of these combinations a few times without success.
2. The directories for Adobe Help and PIB look fine. They are
    C:\Program Files (x86)\Adobe\Adobe Help
    C:\Program Files (x86)\Adobe\PhotoshopdotcomInspirationBrowser
As I said, Chris Campbell has asked me for info and to run some tests. I'll let you know how it works out.
Thanks . . . . Brian

N95-3 (NAM) only works with old screen

I have recently acquired an n95-3 which had an LCD screen which displays properly, but the display is very dim and flickering (backlight is fine).
I therefore ordered a replacement screen for an n95 and the screen displayed no picture, but backlight is OK. I tried with the screen on my friend's n95-5 (China) with the same result. I'm confused as to why the old screen works but the new ones don't. Are the pinouts different?

Ankush,
Thank for your two responses. I have also received some more emails from Chris Campbell around AIR in particular so I'll try to work with him first.
Thanks you for confirming that you do not see any errors after installing the updates. Also that Adobe Help and Inspiration Browser both work after updating AIR to 2.0.4.
I will answer your questions for now though:
1. You asked:
Have you tried this:
Uninstall PSE 9, PRE 9 and any other CS5 Adobe application.
Uninstall Adobe AIR.
Install PSE 9 and run the updates of Adobe AIR and now use the applications?
If it still gives error, uninstall Adobe AIR and then install the 2.0.4 version directly which is available on Adobe.com.
What happends now?
     Yes, I have done all of these combinations a few times without success.
2. The directories for Adobe Help and PIB look fine. They are
    C:\Program Files (x86)\Adobe\Adobe Help
    C:\Program Files (x86)\Adobe\PhotoshopdotcomInspirationBrowser
As I said, Chris Campbell has asked me for info and to run some tests. I'll let you know how it works out.
Thanks . . . . Brian

My time capsule will only work with one device at a time

I just purchased the Airport time capsule. I have it set up with my imac, but I also run a macbook air, older macbook, PC laptop, PC desktop, wii, xbox, and 3 iphones off of this device. My issue is that my ISP does not serve more than 1 IP address and with previous routers, the IP address they recognized was only on my router. Now, each time a new device tries to use the internet, my ISP is bypassing time capsule and recognizing the device IP address. It's very frustratitng! How do I set up my Time Capsule so that it's IP address is the only one my ISP recognizes, but all my devices are able to run off of the Time Capsule as the router. (obviously I am not over educated in this area so solutions in simple language are greatly appreciated!) Thanks!

I read the same solution somewhere else in the forum but it does not solve my problem. When I set up the Airport, it sets up in bridge mode by default. When I contacted my ISP they said it needed to be in bridge mode (their rationale is that they only allow 1 IP address). I just switched it to DHCP and NAT and this is what the default settings go to:
After I update it with these settings my internet won't work at all and this is the error message I get:
Any suggestions?
My internet "Digis". www.digis.net. They are a smaller company and put a dish on my roof. The modem is very small, does not have a router.

Will Itunes only communicate with one device per computer?

I get an invalid response from Itunes when my iphone4 is connected to Itunes. I also have a nano that connectes and is working properly. Will Itunes only work with one device per computer. I took the iphone to an apple store and it connects with itunes like it should. I have swapped cables and ports, and downloaded the latest version. Thanks for your help

It is mean to work with multiple devices, although not simultaneously. However I have had exactly the same issue with iTunes 10.7 and Windows7 and a new 16GB iPod touch on iOS6 just this week.
iTunes detects and displays the iPod classic fine, but won't find the iPod Touch when it is connected. The connection is working fine as the Windows OS can see the iPod touch, just not iTunes.
I had a 2nd PC, which has a copy of the iTunes on it and the same media collection - this PC immediately recognised the Touch, so I have gotten around this issue, although I suspect reinstalling iTunes on the original PC may have also fixed it - I have kept a copy of iTunes 10.7.exe so I can reinstall and avoid that POS V11.
I suspect iTunes gets tetchy about hooking in two devices.
Actually as a mostly Windows / Android user, I don't get why on earth do Apple force you to do everything via iTunes anyway? Seems crazy to me. I sort of like the way I can hook up the Android unit and just drag over the files I want without all the darn hoop jumping Apple wants me to do. Anyway... I digress.
So Not sure. Happy I found an easier solution than a reinstall of iTunes. Of course, using a 2nd (mirrored) PC might not be an option for you. Good luck. Wish I had a better / more useful suggestion for you.

I bought this iPhone from Apple Retail Store for the full amount, but it does not work with my SIM card only works with AT&T

Hello,
I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
Thanks,
Best Wishes

When did you buy it?
Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason. Return it and get your money back, then use that to purchase an unlocked phone.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

Can't sign in using any 3rd party email client with my iCloud account on any Mac. Tried every settings, My iCloud only works with Mail.app

Can't sign in using any 3rd party email client with my iCloud account on any Mac or any other Mac. My iCloud will only work with Mail.app. All the clients I tried work perfectly well as long as I sign in with somebody else's iCloud account. But mine won't work no matter the client (Postbox, Unibox, Airmail...) and no matter the computer.
I can access my account on iCloud.com, but I can't use email clients without getting error messages prompting me to check my password or login.
I was able to use those clients in the past but a couple of months ago I got logged out of Airmail and the issue started just like that!
I tried every possible mail server settings including the following:
IMAP information for the incoming mail server
Server name: imap.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 993
Username: The name part of your iCloud email address (for example, emilyparker, not [email protected])
Password: Your iCloud password
SMTP information for the outgoing mail server
Server name: smtp.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 587
SMTP Authentication Required: Yes
Username: Your full iCloud email address (for example, [email protected], not emilyparker)
Password: Your iCloud password

Those are the correct settings, and they work with any email client that supports Imap.
Try again.

Ipod Classic 160 6th g. doesn't sync w/Imac g5 non intel OS 10.4.11. This is a replacement for same ipod which was stolen recently. That pod worked fine with Itunes 9! Now this pod says it only works with Itunes 10.7. ***!!!! Why has Apple screwed up?

My ipod classic 160 6th gen. was recently stolen. It had 3000 tunes on it and it synced perfectly with Itunes 9 on my Imac G5 non intel OS 10.4.11. So I recently bought same model and guess what, it doesn't sync at all. Now message says it only works with Itunes 10.7 and up. I certainly cant afford to buy a new intel based Mac and I really dont need a new pc. It feels like Apple has dropped the ball on its long time users and tough luck to you and all the $$$$$$$ spent on downloading songs and buying ipods over the years! I AM SO ANGRY THAT I CANNOT BRING MY MUSIC WITH ME ANYMORE. I dont know if there is any solution to this except being extorted to upgrade to new tech! I have been trying to get answers to this issue but nothing seems to work. Any help would be greatly appreciated. I am not a tech genius so extremely techy solutions will be in vane.

one more detail, after a restore, when I attempt to reload music to the ipod, if I try and move, say, 20 files, the transfer seems to work as it should but then stalls on the last file. Eventually, the status will change to "Updates Files on (my ipod)" a and suggests the iPod is syncing even though I have the auto sync feature turned off.
This process eventually works itself out, and seems to take longer relative to the number of files I attempt to transfer. Once done, howver, if I try and eject and dismount the iPod, iTunes stalls with the spinning pinwheel and I am warned that the iPod is syncing again with the spinning candy cane status bar. Eventually thisd works itself out and the iPod dismounts from iTunes and the desktop and eventually the iPod is free to disconnect.
Then if I try and play the music I just transfered, the iPod says there is no music loaded.
Ideas?

HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.

Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario

I am using Windows 7 64-bit on a partitioned hard drive on a MacAir. The trackpad will only work with a click. How do I get the full function of tap and scroll?

I am using Windows 7, 64-bit on a partitioned hard drive on a 2012 MacAir. The trackpad only works with clicking. How do I get the full function of tap and scroll? (I have this on a 2011 Mac Pro with 32 bit Windows 7 and it works properly.)

Windows Control Panel>Boot Camp Control Panel>Trackpad.

Boot Camp won't make a Windows XP driver disc, OS X disc only works with Win7

First time Mac user. Just got a new Macbook Pro.
I have successfully installed Windows XP on the Mac using Boot Camp. But I need the driver disc. The right mouse button doesn't even work and Windows is impossible to navigate without that. The disc eject button does not work, one has to eject a disc using laborious menus. Very frustrating.
When I run Boot Camp it only has the option to make a Windows 7 driver disc. I don't see any way to make a driver disc for Windows XP.
Everywhere I have searched on the Net the information says to put the OS X Leopard disc in the drive when WinXP is running and it will automatically install drivers. When I try that a window comes up saying it only works with Windows 7.
This web site shows screen shots of a Beta version of Boot Camp that makes Windows XP drivers discs.
http://www.askdavetaylor.com/how_do_i_install_windows_xp_on_my_mac_using_boot_ca mp_1.html
How can I make a Windows XP driver disc?
I really hope Apple didn't discontinue/eliminate the option to make a Windows XP driver disc altogether, forcing everyone to use Windows 7 only...
Is there a way to install an older version of Boot Camp over the latest version I'm running? Where would I find it?
Macbook Pro
OS X 10.6.7
Boot Camp 3.0.4
Thank you for your time in helping me on this.

The retail OS X 10.6.3 DVDs unlike your OEM DVD does have a complete set of drivers for $29 w/o having to deal with questionable bitorrent.
Microsoft EOL'd XP and Vista SP1.
Your Mac has Intel Thunderbolt and you don't see Apple doing backward compatibility. You can't run 10.5 on new Mac. So yes it comes with those limitations, but XP is also 20x more vulnerable, IE9 is more secure and XP has not kept up with the latest hardware, besides which I don't see a place or need for a 32-bit OS, any platform today.

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CC

When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CCError message with InDesign CC 2014

Used the 64bit version before CC 2014 as well so don't think that's the issue. Here is the text in the .mxi file if I have missed something:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<macromedia-extension id="PrintUI Tools" name="PrintUI Tools" requires-restart="true" version="3.0.0">
<author name="PrintUI.com"/>
<description/>
<license-agreement/>
<products>
<product maxversion="" name="InDesign" primary="true" version="7.0"/>
</products>
<files>
<file destination="" file-type="CSXS" products="" source="PrintUIManagement.zxp"/>
</files>
<update url="http://printui.com/public/downloads/updates/printui_tools_update.xml"/>
</macromedia-extension>

Nokia MD-51W JBL PlayUp only works with old device...

Similar Messages

Maybe you are looking for