Nokia Podcasting v.1.20 bug report: does not disco...

The version of Podcasting included on current device Software Updates (v. 1.20.0) no longer disconnects wi-fi after performing an automatic download. Previous versions would disconnect wi-fi after it had been used to download podcasts. With the new version, the connection remains active, and although it is not meant to be transferring data it still flattens the phone battery within a couple of hours. This is regardless of the success or failure of the downloads. I do not know if it also applies to a cellular connection.
This somewhat defeats the purpose of an automatic download: I still have to remember to go in and terminate the connection if I want to keep my phone's battery capacity.
WORK-AROUND: In theory it should be possible to install an earlier version of "Podcasting", e.g. the v1.00.03 available on www.nokia.com/podcasting . However my own device (an N79) has a certificate failure when attempting to do so. This behavior is by design and should be carried to all S60 3rd FP2 devices,so the workaround will not operate for most users.
Help I'm trapped in a sig factory.

Similar Messages

Report Does Not Follow Select Column Order

Hi all,
Apex 2.2 on 10gXE
I always encounter this problem, the display column on report does not follow the select column sequence order in the "region source".
It is very tedious clicking the up/down arrow one-by-one in the "report attributes" especially if the display columns are plenty like 40 columns.
Is there a fix/patch or alternative tips for this bug?
Thanks a lot,
Edited by: 843228 on May 24, 2011 10:32 PM

Apex 2.2 on 10gXEStart by upgrading from this old unsupported version.
>
I always encounter this problem, the display column on report does not follow the select column sequence order in the "region source".
It is very tedious clicking the up/down arrow one-by-one in the "report attributes" especially if the display columns are plenty like 40 columns.
Is there a fix/patch or alternative tips for this bug?
>
This is not a bug. APEX maintains the original column order of the report. This avoids problems downstream in areas like the processing of <tt>g_fnn</tt> arrays in declarative tabular forms, where the assigned arrays are column-order dependent.
APEX 4.x fixes column ordering bugs that could lead to report corruption, and includes drag-and-drop column ordering in the new tree view in addition to the up/down arrow re-ordering.
If you really want column order to follow that in the source query, the workaround is to create a new report using the modified query.

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

AR aging report does not print alphabetically by customer name in 8.8

AR aging report does not print alphabetically by customer name in version 8.8.
It is possible to create a custom layout for the receivables aging summary report (to print alphabetically by BP name) to overcome this problem. However, itu2019s not possible for the u201Cdetailed receivables aging reportu201D or u201Ccustomer statement reportu201D.
Why has SAP changed this functionality? In version 2007 SAP takes the order of the rows set on the screen unless other order is specified in the layout.
How can we make the u201Cdetailed receivables aging reportu201D and u201Ccustomer statement reportu201D print alphabetically by customer name?
Steps to reproduce:
Business partners > Business partner reports > Aging > customer receivables aging
Doubleclick on customer name to sort it in alphabetical order.
Click on preview and select u201Creceivables aging summary reportu201D.
The system layouts do not print by customer name in alphabetical order.
Click on preview and select u201Cdetailed receivables aging reportu201D. The system layouts do not print by customer name in alphabetical order.
Also, customer statement report does not print by customer name in alphabetical order.
In SAP 2007 versions, when a marketing document or aging report is printed, SAP takes the order of the rows set on the screen unless other order is specified in the layout.
In SAP 8.8 although it works the same way for marketing documents, it doesnu2019t work like this for Aging reports.
I was able to change the order for the u201CReceivables Aging Summary Reportu201D only. We cannot overwrite a System report, I had to create a new layout called: u201CBusiness Partner Aging (Summary) (Alphabetically Sorted)u201D.
I couldnu2019t set up the order based on BP Name for the other 2 options: Detailed Receivables Aging Report and Customer Statement Report (One page per Customer).
Iu2019ve checked print settings and properties, and I donu2019t see any way of changing the default order for these reports.

Reported it to SAP support + they plan to fix it in a future patch.

WT reporter does not show split for tax authorities!

Dear all:
I need to report for all employees some WTs of taxes, but wt reporter does not show the splits for them (to distinguish federal from statal authorities payments), it is like summarises all the same WTs... I tried payroll recon. report but this one does not output the data in ALV format (im in 4.6 version) so it is not useful to run in bulk
Do you have any work around for this?
I would appreciate any tip or workaround on this,
Thank you!

Hi
1. Allocated costs are always treated as Fixed costs, unless you have booked the expenses in FI using Activity Type as Aux Account assignment object
2. Check whether these costs are included in Inventory valuation in your Cost Comp Str in OKTZ... If not relevant for inv valuation, these costs wont show up for Variance calculations
br, Ajay M

Report does not display some data

Hi,
Using:
- Crystal Reports 2008 SP3 as development platform.
- Visual Studio 2008 to launch the crystal report.
- SQL Server 2005 SP3 as database
Crystal Report:
- rpt file has been set up for a couple of months, working fine uptill last friday
- dataset comes from a SQL Server stored procedure with some parameters. Executing this stored procedure with these parameters, returns the correct result set
- showing the report using the Crystal Reports Viewer, some fields remain blank since the beginning of this week. Why does the report does not show all the data that is in the result set of the stored procedure ?
Any idea for a solution ?
Any idea to debug such strange behaviour ?
Thanks a lot for any help.

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Report does not come up when called from Forms

I have installed Oracle 9i database and dveloper suit on my pc. When I run reports from forms, the report does not come up. I have Adobe Acrobat reader 6. The report does get created, I can see it in the cache directory.
It created an error file, I am posting the begining of this file here.
Please help.
Thanking you in advance.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x65553878
Function name=Java_oracle_reports_engine_EngineImpl_CGetEnv
Library=C:\orahome1\bin\rw90.dll
Current Java thread:
     at oracle.reports.engine.EngineImpl.CGetEnv(Native Method)
     at oracle.reports.engine.EngineImpl.getEnvs(EngineImpl.java:453)
     at oracle.reports.engine.EngineClassPOATie.getEnvs(EngineClassPOATie.java:152)
     at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:205)
     at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
     at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
     at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
     at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
     at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
     at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
     at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
     at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)

Hi ,
Looks like this is not a Forms side problem or even a Reports Servlet problem
Some guesses.
From the exception
at oracle.reports.engine.EngineImpl.CGetEnv(Native Method)
at oracle.reports.engine.EngineImpl.getEnvs(EngineImpl.java:453)
it looks like engine crashing. Did you see the server GUI up and running ? Server might not have started
Give
rwserver server=<server_name> in command line.
The server GUI should come up and show "ready "
You have multiple Oracle Homes on the same machine. So this could be a PATH problem.
1) Go to ControlPanel -> System - Advanced - Env variables - System Variables
Copy the IDS specific PATH to clipboard
Go to iDS_HOME\bin\ and open a command window. Set only the above PATH here. Start a standalone server
rwserver server=<server_name>
and try
(If this works you could write a batch file later)
2) For trouble shooting purposes use a different server name to start the standalone server.
3) Also look in your registry
HKLM\Software\Oracle\Home<x>\
Here please see whether you have any "very long" environment variable (say more than 256 chars or 512 chars).
This is just a guess.
4) To confirm this is not a Reports servlet problem
give
rwclient report=<report_name> + ..... <server=server_name>
If you get same error, then it is not a servlet problem. It could be that Reports server is crashing
Thanks
Ratheesh
[    All Docs     ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

BI Publisher Report does not display decimal numbers

Hi,
I have created a one page BI Publisher Report. I generally take the .xdm and .xdoz files and send it to the client which they upload on their server. The report has been coming up fine until recently there was a glitch on the Client Server. Now the report does not show a a section which has decimal numbers. I can see it perfectly on my machine. I am extremely frustrated to search for a solution and client is not very helpful in providing the information what went wrong or what was the fix on their server. Any help is greatly appreciated.
Thanks,
DRL

user8824622
If i am understanding your issue right i guess i have faced the same one while ago.
The solution for this one is, if you are on the latest patch or update, i am on July update
Go to
Administration--> manage Bi Publisher under Bi Publisher --> under run time configuration --> properties --> the last option on the list which is Use 11.1.1.5 compatibility mode true --> apply
now it should be working
Please let me know if it worked out and mark as correct if it have solved the issue
Thank You

Since I can not log in bug report page, not even getting an error message, I'll write all my issues with ios8 here...

Since I can not log in bug report page, not even getting an error message, I'll write all my issues with ios8 here... I have an iphone 4S and I did the last update. Now I am in trouble.
1. When I move the "sound on/off" button, I get it buzzing 10 times before the setting is changed and I can do anything else, just not reacting to the round button on screen touches.
2. Impossible to copy text from most websites into notes.
3. Impossible to delete an email account in settings.
4. Uses up the battery twice as fast as before. I have "update apps" setting turned off, just reading a couple of mails, making a couple of photos and open maps apps twice a day, and the battery is dead well before the evening.
5. Got extremely slow, and it was getting slower and slower with every system update.
I'm sure I forgot something... But well, that already a lot.

Well, actually number 3 in my list is not true any more, I just tried to delete my account 15 times, then I've written my post, then half an hour later my Settings finally updated my accounts list. Whohoo
I did not try restoring it yet, thank you for the link!

SAP P & L Report does not balance to Balance sheet profit

Dear support,
I have a client that we have just taken over and they have a strange problem with their financial reports. The profit on the P & L Report does not balance to the profit on the balance sheet? The trial balance still balances so I am not sure whee the difference is coming from??
It has not balanced since the first take on balance were brought int othe system. Is it possible that some account with balances were moved from a P & L draw to a Balance sheet draw in the chart of accounts? If so how do I find the problem account?
Regards
Clayton

I resolved this issue myself.

Report painter execution error - KH014 "Report does not exist".

Hi All,
I customized one report in FSI3 and used SE43 to create a t code for this report. In the development system, report will be executable from this t code.
Transport requests are successfully transported from development to production without any error. But on production when I tried to execute the report, I am getting the error KH014 - "Report does not exist".
While checking in production I found that the report was missing from report tree in FSI3 and as a result the customized report cannot be executed. As per basis guys there was not a issue in request transportation.
Has anyone encountered similar problem? How was it resolved?
Thanks.
Prashant

Hi Mikko,
Thanks for your reply but your solution is not working.
Hi Stacy,
I can execute the report from t codes like FSI3 & FSI0 in development.
I used SE43 for t code creation. At the time of t code creation there is a option called "Drilldown" under Report type heading, In drilldown option I selected my report from report type 002 (Financial Statement Key Figure) and created the t code. After this I transported both the request to production server.
Please let me know if this is wrong method or there is any other option to transport this report in Production.
Thanks & Regards,
Prashant

I have typos in my podcast description. Updating the RSS does not correct this. How can I get iTunes to re-read my RSS???

I have typos in my podcast description. Updating the RSS does not correct this. How can I get iTunes to re-read my RSS???

Thanks for your help.
Here are the RSS feeds:
http://www.solidrockvista.com/Podcasts/Lite/rss.xml
http://www.solidrockvista.com/Podcasts/Phat/rss.xml
And here are the iTunes pages:
http://itunes.apple.com/us/podcast/james-world-lite/id162059136
http://itunes.apple.com/us/podcast/james-world-phat/id162296074
Both Podcast Descriptions have typos.

WebI XI 3.1 Report does not fresh in IE6 but it does in IE7

Short Text
WebI Report Does Not Refresh in IE6
Long Text
BO XI 3.1 Windows Server 2003 x64, XP Desk tops with a mixture of IE6
and IE 7.
We have a universe with managed access rights enables at the group
level. The groups we have are: Batu, AUS, and Admin. When someone logs
in as TEST_USER_BATU (user is in the Batu group) the report does not
refresh. The LOVs can be refresh but the report comes back blank. When
we repeat the same work flow in IE7 the report comes back with data.
We have repeated this test on several computers including the servers
running IE6.
Steps for Reconstruction
1)Create Universe with managed access restrictions
2)Restrict groups at the row level including LOVs (see below example)
2.a) Batu Group
2.b) AUS Group
2.c) Admin Group
3) Create restrictions for the Batu and AUS group only.
4)Create generic WebI report applicable for all groups
5) Run WebI Report using a different account for each account in
different group.
6) You will find that the users in the restricted groups can not
refresh the report but the user in the admin group can run the report

Hi all,
Thanks for your responses but nothing seems to be working.
@Mark, Sahil: The properties of the field is set as type "DATE" in the universe.
@Manpreet: Not feasible with timestamp data.
@Anuj: I tried your solution. But it does not work. Its really weird. The date part of the string gets sorted but the time part does not. I have tried splitting the data into date and time into 2 seperate variables and then sorting them, but still the time does not get sorted. The time is also converted to 24 hour format. I have also tried removing the blanks in the data between date and time and converting the same to number. No effect.
Any other ideas?
Kind regards,
Minuj

Nokia Podcasting v.1.20 bug report: does not disco...

Similar Messages

Maybe you are looking for