Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Similar Messages

Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upg

Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upgrade from? So now I have spent lots $$ and nothing working. Why is this so complicated? what do I need to do?

Hi Rave,
Thanks for this; my issue is that I have now supposedly purchased a retail version of Acrobat X1 (i.e just spent more $$, after the upgrade attempt to Acrobat X1 failed), and while this feigns an OK install, it fails in someway to override the "Upgrade Acrobat X1 version". E.G. once I load up to read an acrobat file the "upgrade version" executes/intercepts and ask for serial numbers and check for a previous qualifying version which I do not have, (BUT what I do have is the current retail version of acrobat X1 which is not recognised)
Do I need to uninstall and start over again? (I am reluctant to do this as I am sure serial number issues will arise, as I assume downloaded file will be cleaned up etc, and I am not spending more money trying again!)
Any suggestions?

Discoverer report does not sum up the column

Hi All,
I am running the discoverer report from discoverer desktop and was
trying to use the sum function to sum the total amount of the report.
The sum function does not work and it only display Cell
Sum: (blank) with no actual data.
When i checked the report details some columns are calculated based on the columns which i want to sum up.
Any ideas please share with me
Thanks in advance.

b) What is the difference between sum and cell sum? Well, I certainly won't claim to be a Discoverer guru. From what little I have seen, the practical result is not any difference really between the two. SUM of a calculated row is adding up the calculation to the total. Whereas cell sum is like adding up the individual values behind the calculation you see. The distinction makes more sense when you have SUM DISTINCT and CELL SUM DISTINCT being involved. Then you will see a difference in the calculated total. But for SUM and CELL SUM itself, I have not seen any difference between the two, but I am still pretty new to Discoverer.
e) Aggregate field from a folder. Well, this may be one where you have to play around with your own data to understand. Let me try to give you a simple example. Let's say you have a sales table with 100 rows. You have sales data for 5 cities, and each city has 20 rows of sales history. If you pick Sales Dollars Detail and City Name for your workbook and run, you will get 100 rows in your result (complete detail listing). So that is what happens with no aggregation. Now, instead of doing Sales Dollars Detail, you pick Sales Dollars Sum (the same thing as saying SUM(Sales Dollars) in an SQL statement). Run the workbook. You will now get 5 rows of data, instead of 100 rows of data. You will get one row for each city. If you look at the SQL that Discoverer generates, you will see that it has now done a GROUP BY in the SQL statement. Notice I have not said anything about DISTINCT (just trying to keep things simple).
Now, lets say you do a workbook for City, Part Number, and Sales Dollars Sum. Run the workbook. You get a summarized result (say maybe 10 rows of summary data this time). If you look at the Discoverer SQL, the GROUP BY is now by city and part number, automatically doing that because you picked the SUM version of sales dollars.
Now lets say you add Sales Units Detail to the workbook. Discoverer will give you a warning message that you are have both an aggregate and a non-aggregate and that you may end up with unpredictable results. Run the workbook. You will be back to 100 rows, because you specified sales units in detail.
Most of the time I do not want to see detail rows in a workbook. So most of the time I am picking the SUM aggregate for an amount item.
Hope this explains things a bit. Sounds like maybe you need to take the Discoverer Create Queries and Reports class. Would help you understand these things better. Good luck.
John Dickey

Smartview v11.1.1.3 drill through reports does not work in grids?

Hi,
I'm using v11.1.1.3 and know there is a drill through function to FDM from Smartview grids. I've tried but it does not work in the grids, only works in the forms. However, I'm able to drill through to FDM from workspace grids. Does anyone encounters the same?? Appreciate any kinds advices. Thanks!

Are you certian that the report is showing an input level cell? Often reports are designed to run at Total dimension members, i.e. <Entity Curr Total> which you can not drill into.

BPC75NW: Offline Distribution of reports does not work in Schedule mode

Hello BPC experts,
I'm new in SAP world.
I have the following problem.
In BPC 7.50.06 NW I'm trying to adjust the distribution on e-mail to schedule.
I set up Distribution List. When I start the Offline Distribution Wizard -> Distribute Now all works without problems.
The problem starts when I start the Offline Distribution Wizard in the Schedule mode. All the settings I do the same as at "Distribute Now".
Then I set the report should be sent daily, starting with 13.10.2011, indicating the Start Time. As a System password I'm pointing my domain password (I know no other passwords).
At the time specified in the Start Time nothing happens, i.e. the schedule does not work.
Tell me, please, if faced with a similar problem, how it can be solved?
Thank you for your help, this is greatly appreciated.
Regards,
Todoshi Takato

Moved to .NET SDK forum.
Search here, lots of post on IIS and setting Printer Access Permissions for your application.
Also search MSDN on what is required to for IIS to access local Printers.
Also search for ActiveX Controls and Browser permissions, you'll likely have problems there also since most Browsers will not or do not recommend allowing any ActiveX control.
Don

CRVS2010 Beta - Crystal Report does not work with VS 2010

After having installed vs 2010, as mentioned, I dowloaded crsytal report . But when trying to create a new crystal report object, I have a html page displayed but crystal report does not start. I would like to know how to make crystal report start to create new report ?
Thanks
Patrick
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Thread moved to NET Development - Crystal Reports
Edited by: Ludek Uher on Aug 27, 2010 6:48 AM

My OS is windows XP. Visual studio 2010 Professional version 10.0.30319.1.rtm rel. Visual basic is 01018-532-2002102-70383. dot net framework is 4.0.30319 rtm rel. When I add a new crystal report object to my project a file named CrystalReport1.mht. Its content is :
From: <Saved by Windows Internet Explorer 8>
Subject: Crystal Reports for Visual Studio 2010
Date: Fri, 2 Oct 2009 17:24:34 -0700
MIME-Version: 1.0
Content-Type: multipart/related;
     type="text/html";
     boundary="----=_NextPart_000_0000_01CA4385.35B07AB0"
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
This is a multi-part message in MIME format.
=_NextPart_000_0000_01CA4385.35B07AB0
Content-Type: text/html;
     charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Content-Location: file://C:\_Working\Projects\Cortez\Stub Templates\RTM\EN\CR for VS 2010 HTML\CRforVS2010.html
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
then followed by characters whch are not readable.
Thank you for your help
Patrick

Web reporting does not work in BW system

Hi-
I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
We get the following message when trying to run BW queries on the web:
Not found
The following error occured:
%3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
I've checked SICF and all services are activated. I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there. Here are our settings:
rdisp/max_wprun_time                        3600
abap/cache_area                             10000000
abap/buffersize                             1500000
login/system_client                         100
INSTANCE_NAME                               DVEBMGS00
SAPSYSTEM                                   00
rdisp/wp_no_dia                             10
rdisp/wp_no_btc                             6
rdisp/wp_no_vb                              2
rdisp/wp_no_vb2                             1
rdisp/wp_no_enq                             1
rdisp/wp_no_spo                             1
DIR_TRANS                                   /usr/sap/trans
ms/server_port_<xx>                          PROT=HTTP, PORT=8080
icm/server_port_0                           PROT=HTTP,PORT=8080,EXTBIND=1
DIR_ORAHOME                                 /oracle/BWD/920_64
ipc/shm_psize_10                            104000000
ipc/shm_psize_14                            0
ipc/shm_psize_18                            0
ipc/shm_psize_19                            0
ipc/shm_psize_30                            0
ipc/shm_psize_40                            114000000
ipc/shm_psize_41                            0
Is there anything obvious missing?
Thanks,
Tristan

Following seems a little odd....
ms/server_port_<xx> PROT=HTTP, PORT=8080
I would expect something like:-
ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number)

Report does not work in 2nd instance after transported

My SAP Script report does not come out correctly after its transport into a 2nd instance. The fonts displayed in the report don't look the same like what we have in instance #1.
The report originally created in the instance #1 is good, but after the transport, the fonts in instance #2 are larger and some of the contents are not properly aligned. Some part of the boxes are also missing. I would appreciate any suggestions of how to fix them. Thanks, Sam

Hi,
There might be a possiblity that the necessary style used in the SapScript is not transported to the New Instance and hence the Cosmetic issues...
Check whether all the associated objects like Style are transported to nre Instance or not?

I just upgraded to the maverick and, of course, the iPhoto does not work with it. How do I upgrade to version 11? I cannot find it anywhere

Recently upgraded to Maverick and the version of iphoto does not work with it. How do I get and download the version 11? I can't find it anywhere

Which iPhoto? 9.4.6 and 9.5.1 work here.
FWIW, iLife '11 is available here: http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES

Enter key does not work anymore in address bar after FF update

After the update the Enter key does not work anymore. Neither when I type the url directly, nor when I select it from the history.
In short FF has become unusable. Now I need to install and use a less crappy browser. Extremely sloppy, amateuristic update.

see if this is helpful : go to Tool > Options > Advanced > General tab > Browsing and '''Uncheck''': "Use hardware acceleration when available" .

HTMLDB_ITEM.date_popup on single row report does not work

Dear HTML DB Team,
On a report wit a single( one ) row the "HTMLDB_ITEM.date_popup" does not fill the selected date to the cell. (Same for wwv_flow_item.date_popup)
On the same report with 2 or more rows HTMLDB_ITEM.date_popup works fine.
Any suggestions?
Erik
testcase:
create region:
select htmldb_item.hidden(1,empno) empno,
ename,
htmldb_item.select_list_from_query(3,job,'select distinct job, job from emp') job,
htmldb_item.popupkey_from_query(4,mgr,'select ename, empno from emp',10) mgr,
wwv_flow_item.date_popup(6,null,hiredate) hiredate,
htmldb_item.text(7,sal,10) sal,
htmldb_item.text(8,comm,10) comm,
htmldb_item.select_list_from_query(9,deptno,'select dname, deptno from dept') deptno
from emp
delete 13 rows from emp ( 1 row left ):
delete from emp
where ename <> 'KING';
=> date_pop does not work

Using the htmldb_item API vs. built-in multi-row update functionality:
I can't speak to the question about the date for the next HTML DB release. But I'd like to add a few comments to this discussion regarding the use of the htmldb_item API package. It is generally advisable to use the built-in multi-row update functionality instead of htmldb_item function calls when implementing tabular forms. While I do acknowledge that some display types such as date popups are not yet available, I would nevertheless recommend working with what's available on the report column attributes page (i.e. using a text field for the date columns) as opposed to using htmldb_item functions whenever possible. Please keep in mind though that they are mutually exclusive, so they can't be combined on the same report.
The reasons for my recommendation are simple: first of all, if you use htmldb_item calls as part of your SQL statement, the HTML form elements are rendered for all rows in your result set. The built-in types on the other hand only render HTML form elements for those rows shown on your current page, thus you get better performance. Secondly, htmldb_item calls make your SQL statement quite complicated, not only has the engine to jump back and forth between executing your SQL and calling the PL/SQL functions, you also need to take extra care implementing your PL/SQL processes according to the item IDs you assigned in your htmldb_item function calls. When working with e.g. popup LOVs, this gets even more complicated because that type actually results into two html form elements for each column (one storing the hidden ID, one storing the display value). And lastly, by using the multi-row update functionality, you would get lost update detection automatically built. That means, that you can't accidentally overwrite another person's changes in the event that you should both be working on the same data. Implementing this kind of functionality with your htmldb_item based tabular forms would take a lot more effort than simply go with what's already provided.
So please carefully weigh the benefits of additional display types that you'll get by using the htmldb_item API against all the functionality you'll get by using the built-in tabular form and multi-row update features.
Regards,
Marc

Print report does not work in built mode (LV7.1+XP)

Good morning,
I've read some threads about the topic in this Q, but no solution. So my hope is that NI has resolved the problem. Here it goes:
In normal edit mode I can use the Print Report.vi (using the default win printer) to print out some data. The generated report is a standard NI report (that is NOT HTML).
When building an application this no longer works. No data is passed to windows (the printer icon in the system tray never appears) - and hence no output on the printer!
I use WinXP and LV7.1 in both modes. The printer is a HP2300 LaserJet but I've also tried using the old stable Canon LBP 8 II on the FILE: port - but in .exe mode the file box does not appear.
I really hope that NI has a solution
for the problem since we need the built application on several client. And we do not want to pay for several LV licenses.
Speculations on both the application builder and report generation tools have been given in previous threads... However, these gave no solution and all threads are from before LV7.1.
Thanks in advance!
Martin

Skinny wrote:
> In normal edit mode I can use the Print Report.vi (using the default
> win printer) to print out some data. The generated report is a
> standard NI report (that is NOT HTML).
>
> When building an application this no longer works. No data is passed
> to windows (the printer icon in the system tray never appears) - and
> hence no output on the printer!
>
> I use WinXP and LV7.1 in both modes. The printer is a HP2300 LaserJet
> but I've also tried using the old stable Canon LBP 8 II on the FILE:
> port - but in .exe mode the file box does not appear.
>
> I really hope that NI has a solution for the problem since we need the
> built application on several client. And we do not want to pay for
> several LV licenses.
Are you sure you checked the "NI R
eport Support" under the Advanced
button of the Installer tab in the application builder?
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Scheduled BEX Broadcaster reports does not work automatically after BW 7.3 upgrade

Hello,
We recently upgraded our BW system from 7.0 to 7.31
Since then broadcasting reports has been inconsistent. Not all the reports are broadcasted.
Some reports of object type Query has been scheduled to run everyday but I don't see that in released status in SM37.
Some WAD templates throws an error that states " JAVA SYSTEM ERROR : EXCEPTION in method process function"
WAD reports also flags this warning : "Transformation Exception while transforming BEX web templates" in all the reports.
System Version:
BI ABAP 7.31 SP11
BI JAVA 7.00 SPS 30 Patch.
Most of the suggested SAP Notes are covered in this release.
SAP suggests to upgrade BI JAVA. But we are looking for a quick fix since JAVA upgrade has to go through a process and that's time consuming.
Appreciate your suggestions on this.
Thanks,
Nithya.

Hi,
Please have a look to the Blog - BI-JAVA, BEx Web and EP: the real connection to resolve your Problems after the Upgrade to 7.31.
There a quite massive differences between BI-JAVA 7.0x and 7.3x.
See also the Section BEx Web Java 7.3x in the SCN Document - BEx Versions 3.5 and 7.x after Upgrade
Best Regards Roland

Xl Reporter does not work after the upgrade to 2007A PL 47

Hi Experts
UPgraded to 2007A PL 47 from 2005A. Upgrade was done successfully. However the XL reporter is
not functioning. When you go to Tools and click on XL reporter nothing happens. No error message
comes up even.
Client is using SQL 2005 MS server 2003
I ahve done the test upgarde in an image of the live server
thank you
Regards
Aosara
Edited by: Apsara Senaratna on Feb 10, 2010 4:33 AM

Hi Thannga
The answer is no.
I believe when i logon to SAP add on at the bottom of the menu it should come up " connecting Addon: XL reporter" (i get this on other dB's when connecting to SAP)
Could this be related to the environment. As other than this there was no issues with the Upgrade.
Thank you
Regards
Apsara

The iWork not working on my iPad 2 after OS upgraded to 5.0 or 5.0.1

Tried to redownload the iWork and install again, but no screen of all the software after tap it to work, after a while the screen close and back to original screen.
It was working well with OS4. Appreciate anyone can help to solve it.

I had this same problem and played with the function that changes the purpose of the switch that can either MUTE the iPad or put into ROTATION LOCK. This is just a theory, but it seems that when I made the switch from utilizing the MUTE function to ROTATION LOCK I may have had the switch in the MUTE setting. So when I switched it back to serve as the MUTE function the sound effects returned when I ensured it was OFF. I would advise trying to play with the function a little bit. Go into Settings > General > and make sure that "Mute" is selected as the function for the purpose of the side switch. Once you have that, ensure that the switch is in the position which does NOT display the red dot when viewed from the side. Check your sound effects by either opening up a game or composing a message and listening for keyboard clicks (provided you have keyboard clicks enabled...
Let me know if this works.

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Similar Messages

Maybe you are looking for