Non-English international email addresses

Hi
Any help or pointers are much appreciated.
I get data feed from our HR database to our application database.
Some of the email addresses are non-english ( international ).
The questions is 1.
1. how do I store, retrive and use the same for posting email notification ?
2. What should be my database server charater set ?
3. What should be my client application charater sert ?
4.How do I capture the email address. Meaning what is the data type of the email address field in the table.
5. Will there be any impact on other oracle database, which is connecting to our application database
thanks
siva

Thank you, Dan.
Sorry, what I meant by "non-existent" is not quite
straightforward. Let me explain this way:
I observed the problem only occurred to emails of our
company. For instance: our company's email address ends with
@abc.com.
my email address: [email protected]
my previous colleague's address: [email protected] (he's gone and
the email is invalid / deactivated now)
my client's email: [email protected] (used to be valid)
If I code this way:
<cfmail to="[email protected]" failto="[email protected]"...>
"failto" does work and I got the email.
but if these:
<cfmail to="[email protected]" failto="[email protected]"...>
<cfmail to="[email protected];[email protected]"
failto="[email protected]"...>
I never got emails reporting the failure but error lines in
the mail log and the exceptions log which read:
"Error","scheduler-3","01/28/09","11:55:32",,"Invalid
Addresses"
"Error","scheduler-3","01/28/09","11:55:32",,"Invalid
Addresses"
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.1.1 User
unknown
at
com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at
com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at coldfusion.mail.MailSpooler.deliver(MailSpooler.java:832)
at
coldfusion.mail.MailSpooler.sendMail(MailSpooler.java:731)
at
coldfusion.mail.MailSpooler.deliverStandard(MailSpooler.java:1021)
at coldfusion.mail.MailSpooler.run(MailSpooler.java:986)
at coldfusion.scheduling.ThreadPool.run(ThreadPool.java:201)
at
coldfusion.scheduling.WorkerThread.run(WorkerThread.java:71)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 550
5.1.1 User unknown
at
com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 7 more

Similar Messages

Cfmail "failto" not working with non-existent internal email addresses

We've hard-coded cfmail TO value in many places across many
applications, i.e.
<cfmail to="[email protected];[email protected];[email protected]"
...>
Suppose when one of the users (user1,user2, user3) left
company and his email address was removed from the MS Exchange
server, cfmail would fail saying
A problem occurred when attempting to deliver mail.This
exception was caused by: javax.mail.SendFailedException: Invalid
Addresses; nested exception is: class
javax.mail.SendFailedException:
550 5.1.1 User unknown
in the server exception log and cfmail wouldn't report the
error to the email address of "failto".
So I'm wondering if it's possible to have cfmail ignore the
bad one(s) and continue to send the email? Or is there anything I
should do with the Exchange server?
Advice is much appreciated.

Thank you, Dan.
Sorry, what I meant by "non-existent" is not quite
straightforward. Let me explain this way:
I observed the problem only occurred to emails of our
company. For instance: our company's email address ends with
@abc.com.
my email address: [email protected]
my previous colleague's address: [email protected] (he's gone and
the email is invalid / deactivated now)
my client's email: [email protected] (used to be valid)
If I code this way:
<cfmail to="[email protected]" failto="[email protected]"...>
"failto" does work and I got the email.
but if these:
<cfmail to="[email protected]" failto="[email protected]"...>
<cfmail to="[email protected];[email protected]"
failto="[email protected]"...>
I never got emails reporting the failure but error lines in
the mail log and the exceptions log which read:
"Error","scheduler-3","01/28/09","11:55:32",,"Invalid
Addresses"
"Error","scheduler-3","01/28/09","11:55:32",,"Invalid
Addresses"
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.1.1 User
unknown
at
com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at
com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at coldfusion.mail.MailSpooler.deliver(MailSpooler.java:832)
at
coldfusion.mail.MailSpooler.sendMail(MailSpooler.java:731)
at
coldfusion.mail.MailSpooler.deliverStandard(MailSpooler.java:1021)
at coldfusion.mail.MailSpooler.run(MailSpooler.java:986)
at coldfusion.scheduling.ThreadPool.run(ThreadPool.java:201)
at
coldfusion.scheduling.WorkerThread.run(WorkerThread.java:71)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 550
5.1.1 User unknown
at
com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 7 more

Outlook 2010 - "Reply To" linking to wrong Exchange 2010 Internal Email Address

Hi,
One of my internal email users (Exchange 2010 Enterprise) compiled an email from within Outlook 2010 and sent it to a specific internal colleague with a CC to two other internal colleagues plus two external contacts.
They all recieve the email successfully but if any of them (internal & external contacts) try to "Reply" or "Reply All" the "To" for the new email is automatically populated with a completely different and unrelated
internal email account instead of that of the original sender? This occurs when attempted from either thier Outlook or OWA environments.
This appears to be a one off issue, as the original recipient of the problem email has recieved other emails from the same sender both just before and soon after which all behave correctly.
I have looked at the View Source information for the recieved and confused email from Outlooks perspective and there is no reference within the source to the wrong account that get consistantly used for the
purposes of a Reply.
I have never experienced this sort of problem before since administering Exhange etc and would like to understand how it can randonly occur.
Any help would be most welcome.
Regards,
Mark

Hi,
Does this issue happen to other emails or just the certain one?
On the sender side, please go to Send Items folder, find and open the problematic message. Click on File > Properties and check if the user set “Have replies sent to” in the Delivery options section:
If the original email was set with this option, when we click Reply, it will send email to the people typed in the box.
We can also check the message properties on the recipient side.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support

Erec - leaving action deleted internal candidate email address not working

Good morning
We have the following situation:
1. A person was made a leaver in HR with future leaving date.
2. Decision was made that the person could actually stay so the leaving action was deleted in HR.
3. In erec in SU01 person still showing as role RCF_INT however the email address (produced from IT105 subtype 0010 in HR) was blank and his Alias field populated with his employee number ie: as if he was a leaver still.
4. I have manually updated the email address in erec for his internal email address - this did not let him apply for an internal job. I then deleted it in IT105 in HR and then recreated it in IT105 - this has gone across to Erec however he still cannot apply and the Alias field is still being populated.
So erec is behaving as if he is part internal and part external! How can I stop the Alias field being populated for him and how can I then get the email address to work?
many thanks
Dawn

Hi Nicole
Thank you. The order of events was as follows:
a. On 25.01.11 a leaving action was done to start 01.04.11
b. A decision made in March that the individual could stay however the leaving action was not deleted until 08.04.11
c. This meant that he became a leaver in erec and due to subsequently deleting the leaving action he has reverted to INT_CAND (which is what we want).
I have managed to get the email address to work by deleting the IT105 subtype 0010 in HR, I then recreated it in HR and it has PFAL'd over to erecruitment so the user is now able to apply for jobs.
However the Alias field is still populated and the user has an additional employee number in erecuitment. Are you able to advise how the alias field can be depopulated?
Many thanks
Dawn

I can't send with non-icloud email address

I'm on OS X 10.9.1, and can't send emails using a non-icloud/mac email address, in Mail. I can recieve emails addressed to my non-mac email address.
I've had this problem for several years, and there didn't seem to be a solution to start with. I was hoping the issue might have been fixed by now, but I still haven't been able to find a way to configure Mail so that it will work.
This is very annoying, because the non-mac email address matches my website and my email signature, so it is irritating that I don't look professional when sending or replying to emails for my business. It also makes automatically organising emails into mail boxes (work and personal) impossible.
In preferences > accounts > account info, I have both addresses separated by a comma. I can't see anywhere else I can put it.
I'd be very grateful for any wisdom on this!

If you migrated from MobileMe, try deleting the e-mail account in your mail preferences and adding it back again. You will only be required to enter your password and the ID, the setup should add the correct settings and hopefully this will resolve your problem.

I cant access icloud, my email address has changed recently and I cant use any emails and passwords or set up a new id, cant get hold of apple support for help, very frustrated!

I can not access icloud, my email address changed a while ago none of my email addresses and passwords work, I have tried to get a new password but that dosent work!, tried to contact apple support, no luck there either! What can I do?

If you are trying to change the iCloud ID ("email address") you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Internal emails not being received.

Hi,
We have come across an issue in our office with our blackberrys. If we send emails from our Blackberrys to another internal email address it arrives on our computers in our outlook but not on the blackberry. It doesn't fail or not sent it goes as if its sent but never arrives on the Blackberry.
If we send from our Computers to the address it arrives on both the Computer and the Blackberry.
Our carrier is vodafone ireland... and we have also spoken to our hosting company..
Can anyone help with this... it is as if Blackberry have blocked our company emails!

Yes, that helps ... and this only occurs when you send email FROM your BlackBerrys to other internal (meaning on your same company or corporate email domain name) email addresses.
First, check your internal email server's spam folders for those addresses and make sure the mail is not being filtered as spam.
Then, here are a couple of guides and suggestions
KB11036Firewall and connection requirements for the BlackBerry Internet Service
KB12447Error when sending email messages in same domain: authentication error: 530 5.1.0 unknown address
KB21775How to allow enterprise activation traffic for a BlackBerry Enterprise Server to make it through a spam filter
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Changing outgoing email address from iphone

I currently have my MobileMe account set up on my iphone, and it is using my MobileMe ID as my email address <Edited by Host>. However I would like to set it up with my alias<Edited by Host>. Is there a way to change this setting on the phone? I know I can change the outgoing email address from mail on my computer, but I don't see that function on my iphone.
Thanks

You can set up MobileMe to use any email address as a 'push' email on the iPhone. The first thing you need to do is set your non-MobileMe (.Mac) email address for auto-forward to your MobileMe (.Mac) account.
When you create the email account, make sure you set it up as Other (not as a .Mac or MobileMe account.) Then select IMAP as the type of account. Enter the name and auto-forwarded email address. (This is the email address that will show as the "From" email, even though you're using your MobileMe account.)
For your mail server settings, use your MobileMe settings:
* Incoming settings:
o Host Name: mail.mac.com
o User Name: MobileMe user name
o Password: MobileMe password
* Outgoing Settings:
o Host Name: smtp.mac.com
o User Name: MobileMe user name
o Password: MobileMe password
* Advanced:
o Use SSL - On
o Authentication - Password
o Server Port - 587
Now you're able to receive 'push' email from your non-MobileMe account, and reply without using the @me.com address. (You can use those same settings in the Mail App as well.)

How can I get Mail to 'forget' old email addresses?

Several work contacts have recently changed their email addresses, but when I type their names in the To: box in Mail, it brings up both the new and old addresses.
None of these email addresses are in my Address Book, Mail is obviously just picking them up from previous emails I have sent and received to/from these people.
How can I get Mail to 'forget' these old email addresses and just bring up the current ones?
(I have already accidentally sent emails to the old addresses because they are coming up in the drop-down menu. I would much prefer it to be idiot-proof and not bring the out of date addresses up at all)

HT201356 Why can't I change my "Apple ID and Primary Email Address" to an email address using an Apple domain?

I am trying to use an Apple EMail address as my primary email address and I am unable to change it. I previously had another "nonapple" address identified as my Apple ID and Primary Email address. Now I apparantly can only change it to another "non Apple" related email address. It seems stupid to have to go to Google and use thier email address to make a change.
What gives.

Thanks Roger! I understand that it is an Apple ID already that makes sense. That "non Apple " address however, is compromised and I do not wish to use it anymore and will be shutting it down. I find it strange that I must only identify a "Non Apple" address as my "primary email address". I have an alias address on the account and I can sign in using it as my Apple ID. i don't see the Logic in forcing someone to use another email provider as your primary mail service. (I know I can set up alias's and use them under an Apple domain, but the primary email will still be there and I understand used for any account communications from Apple.) Any further comments on this situations?

Remove email address from address complete on iPhone 4S

Hi,
I need help deleting outdated email addresses from address complete on my iPhone 4s.
I recently upgraded from 3G and apparently email addresses that were previously used but not valid anymore are showing up on my new iPhone 4s.
I've looked in my contact and none of those email addresses exisit.
Please help!

Unfortunately, the only way to get rid of the email address complete list is to restore the phone in iTunes without using a backup. There's no way to edit or delete the list otherewise.

Avoid Email address check while creating or changes functional location PM

Hi Experts,
We have upgraded 4.6C system to ECC 6.0 with EHP4.
We are tring to change the existing functional location created in 4.6c through tcode IL02 -> location tab -> Email address.
and tring to maintain value as 'CAP 20/20/97' in email address field but it pop-ups with the error message as
'Email address 'CAP 20/20/97' is invalid'.
We know this is a SAP standard check but as part of the AS IS functionality, end user is able to maintain the same value in 4.6c and expecting same in ECC 6.0.
NOte : End user is using this field SMTP_ADDR (Email address) for multiple purposes.
When we reached SAP, following is the SAP responce.
This validity check is in compliance with RFC 2822.
This behaviour is standard since note 799902. If you would like to see
this functionality changed then please proceed as outlined in the
attached note 11.
Can any one provide work around solution to avoid the Email address validity check ?
Regards,
Suresh Goud.

Hi Pete,
I just want to find out the reason for occuring this issue in ECC 6.0. Is because of any incomplete validation / missing configuration / implementation of any other SAP Note ? PFA the SAP note details for your easy reference.
SAP Note No. 1546997
Number 1546997
Version 1
Processor
Processing Status New
Implement. Status Cannot be implemented
Language EN
Short Text Correction of translation of '<Email address & invalid>'
Component XX-TRANSL-NL
Long Text
Symptom
Wrong translation /
Reason and Prerequisites
Solution
Translation of objects using transaction SE63 (see further below)
Transport Object(s):
PgID Object Name
LIMU MESS XS138
Package: SCON
Software Component: SAP_BASIS
Application Component: BC-SRV-COM
Translation Guideline:
English Text: Email address
Other terms
SE63, SE91
Valid Releases
SAP Basis component
SAP Note No. 1546997 11/11/2013 Page 2
46C
620
640
700
710
711
701
702
720
730
Links to Support Packages
Software Component Release Package Name
Thanks & Regards,
Lakshmi S

Send email to a non-sap email address

Hi,
I have to send a notification when one of the condition occurs. I have to send email based on the role of the users, i.e first find the email addresses of the users based on the role and then send email to their non-sap email addresses(like the company outlook email). Can someone tell me the detailed steps need to be followed here..
Thanks in advance,
Henry.

hi David,
    WELCOME TO SDN
       Use FM <b>SO_NEW_DOCUMENT_SEND_API1.</b>
SAP Send mail via ABAP functions SO_NEW_DOCUMENT_SEND_API1
This abap mail sending program demonstrate how you can send a mail to the user SAP Office mailbox.
REPORT ZSEND .
TABLES: KNA1.
data for send function
DATA DOC_DATA LIKE SODOCCHGI1.
DATA OBJECT_ID LIKE SOODK.
DATA OBJCONT   LIKE SOLI OCCURS 10 WITH HEADER LINE.
DATA RECEIVER LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.
SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.
WRITE:/ KNA1-KUNNR, KNA1-ANRED.
send data internal table
CONCATENATE KNA1-KUNNR KNA1-ANRED
                         INTO OBJCONT-LINE SEPARATED BY SPACE.
APPEND OBJCONT.
ENDSELECT.
insert receiver (sap name)
REFRESH RECEIVER.
CLEAR RECEIVER.
MOVE: SY-UNAME TO RECEIVER-RECEIVER,
        'X'      TO RECEIVER-EXPRESS,
        'B'      TO RECEIVER-REC_TYPE.
APPEND RECEIVER.
insert mail description
WRITE 'Sending a mail through abap'
                 TO DOC_DATA-OBJ_DESCR.
CALL FUNCTION <b>'SO_NEW_DOCUMENT_SEND_API1'</b>
     EXPORTING
          DOCUMENT_DATA              = DOC_DATA
     IMPORTING
          NEW_OBJECT_ID              = OBJECT_ID
     TABLES
          OBJECT_CONTENT             = OBJCONT
          RECEIVERS                  = RECEIVER
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.
http://sapr3.tripod.com/abap011.htm
Regards,
Santosh
Note: Reward Points if helpful

Non English characters in BIP email

Hi, my report contains Japanese characters, when I view the output in HTML format. It is displayed properly. But when I click on send button , enter email parameters like to, cc, bcc, subject , etc and send it, in the mail I receive, the japanese characters are not getting displayed properly. The same problem occurs for spanish and portugese texts-in general to all non english characters. I am using Oracle Business Intelligence Publisher Release 10.1.3.4. If someone has faced a similar issue, kindly help. Thanks in advance

Suggestions
1) Try with NLS_LANG as
SWEDISH_SWEDEN.WE8DEC
2) Make a paramform and enter via paramform (unencoded)
(This is just for testing purpose)
3) Change machine locale to swedish and try
4) Which reports version is this ?
Please see
BUG 2713695 - NLS CHARACTERS FOR PARAMETERS CHANGE TO QUESTION MARKS WHEN PASSED ON URL BAR
Get in touch with Support to see if this is the issue and if "yes" get a one-off patch.
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

How do I delete stored email addresses in my iphone? When sending photos, I don't want to have certain email addresses "popping up" from the internal memory, I've deleted my entire "Contact" list but they still appear. Help please!

How do I delete stored email addresses in my iphone? When sending photos, I don't want to have certain email addresses "popping up" from the internal memory, I've deleted my entire "Contact" list but they still appear. Help please!

As with the Mail app on a Mac, the iPhone's Mail app stores all email recipients in a list of previous recipients which is separate from the address book or contacts. The email address autofill feature when addressing an message pulls from Contacts and from the list of previous recipients.
Different from the Mail app on a Mac, there is no access to the list of previous recipients with iOS on an iPhone, iPod Touch, or iPad to remove a previous recipient from the list, or to add a previous recipient to the address book or contacts that is not already entered - not at the present time anyway.
The only way to purge the list of previous recipients at the present time is by restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, which will start being re-populated again with every sent message.

Non-English international email addresses

Similar Messages

Maybe you are looking for