Non-Global component resolution in ATG-Spring Integration

Hi all,
Can you please let me know how can I resolve a non-global scoped ATG component in a Spring Application?
I have followed the steps mentioned in the ATG documentation as-is but the current SPRING release has deprecated the use of singleton attribute (instead uses a scope attribute).
Did anyone face a similar problem?
Any of your inputs would definitely be of much help.
Saludos
Kartheek.

this post will help you.
Re: How to resolve Session Component

Similar Messages

Add tape device to non-global zone

Hi,
I have a SCSI attached Ultrium tape device attached and configured against the global zone.
The /dev/rmt/0* definitions in the global zone are links to ../../devices/pci@2*
I need to be able to use this tape device from the non-global zones.
To enable this, I have done the following:
zonecfg -z <zone name>
add device
set match=/dev/rmt/0
end
verify
commit
exit
I repeated the above for /dev/rmt/0m and /dev/rmt/0mn
Then I restarted the zone with the command:
zoneadm -z <zone name> reboot
After the reboot, I can see the device when using "mt -f /dev/rmt/0 status", but whenever I try to write a SAP brbackup to the new (initialised and not write protected) tape within the drive I get the following error:
BR0278E Command output of 'LANG=C cd /oracle/<SID>/sapbackup && /usr/sap/<SID>/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape
sh: /dev/rmt/0mn: cannot open
BR0280I BRBACKUP time stamp: 2012-04-04 08.21.41
BR0279E Return code from 'LANG=C cd /oracle/<SID>/sapbackup && /usr/sap/<SID>/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.
BR0359E Restore of /oracle/<SID>/sapbackup/.tape.hdr0 from /dev/rmt/0mn failed due to previous errors
Have I created the device incorrectly, or does anyone have any ideas what could be the reason the write fails?
Any help appreciated.
Edited by: user11329299 on 04-Apr-2012 01:09

Hi,
Just to bring you up to speed, I have now fixed the issue.
The resolution was all within the iniSID.sap file that the backup is using. I have changed a number of parameters within this file:
1.     tape_copy_cmd = dd (was cpio)
2.     rewind = "mt     -f $ rew; sleep 30" (was " mt -f $ rew")
3.     rewind_offline = "mt -f $ offline; sleep 30" (was "mt -f $ offline")
4.     tape_pos_cmd = "mt -f $ fsf $: sleep 30" (was "mt -f $ fsf $")
5.     tape_size = 500G (was 18000M)
After making those changes, the backup started from within DB13. I believe that the main culprit was the tape_copy_cmd, but the others were changed to allow the tape drive time to become online again after any query.

How to enable GUI in a non global zone in solaris11?

How to enable graphical logon in a non global zone in solaris11, so the zone can be login by Xmanager? Thanks!

This guide will cover how to setup a basic VNC connection to a Solaris 11 machine. There is also an optional step to allow for persistent VNC connections.
Step 1
Configure GDM to include ‘[security] DisallowTCP=false’ and ‘[xdmcp] Enable=true’.
$ sudo gedit /etc/gdm/custom.conf
# GDM configuration storage
[daemon]
[security]
DisallowTCP=false
[xdmcp]
Enable=true
[greeter]
[chooser]
[debug]
Step 2
Configure X-Server to accept remote connections.
# svccfg -s application/x11/x11-server
svc:/application/x11/x11-server> setprop options/tcp_listen = boolean: true
svc:/application/x11/x11-server> end
Step 3
Configure the VNC service (you could change the ‘-geometry 1280×720′ to whatever resolution you would like).
# svccfg -s xvnc-inetd
svc:/application/x11/xvnc-inetd> setprop inetd_start/exec = astring: "/usr/bin/Xvnc -desktop sol11:0 -geometry 1024x768 -inetd -query localhost -once securitytypes=none"
svc:/application/x11/xvnc-inetd> setprop inetd/wait = boolean: true
svc:/application/x11/xvnc-inetd> end
** The line highlighted red is optional – only do this if you want your VNC connection to persist (as well as any potential security issues)
or
# svccfg -s xvnc-inetd
svc:/application/x11/xvnc-inetd> editprop
search for # setprop inetd_start/exec = astring: "/usr/bin/Xvnc
copy the line, uncomment the copy, makethe changes above, write the file out.
svcadm refresh xvnc-inetd
Step 4
Disable and the re-enable the GDM and VNC-inetd services for the changes to take effect.
$ su root
Password:
# svcadm disable gdm xvnc-inetd; svcadm enable gdm xvnc-inetd
If still in maintenance, reboot (I had to, don't know why).
Step 5
Point your favourite VNC client at your Solaris server and test if it accepts your VNC connection – you should be presented with a Username/Password login screen.
If you performed the optional step to make your connections persist – close your favourite VNC client and then reconnect – if you remained logged in you have a persistent connections.
Greg on said:
After a fresh text install of Solaris-11 (11/11) both xvnc-inetd and gdm are not present. After installing them (# pkg install xvnc-inetd gdm) I can’t get gdm to start:
# svcadm enable gdm
# svcs gdm
offline 10:24:03 svc:/application/graphical-login/gdm:default
Any thoughts?
Ron on said:
You are missing some X packages. Do the following:
pkg install slim_install           # installs 400+ packages
svcadm enable gdm && exit      # gdm now works
pkg uninstall slim_install           # uninstalls the installer package only

SMCnsnmp in shared-ip non-global zone errors due to duplicate I/F index

Hi all,
I have Solaris 10 zones using the shared-ip model, with Net SMTP installed in the global and non-global zones.
Smtpd starts normally in the global zone, but fails to start in the non-global zones, reporting this error ...
$ sudo tail /zones/roots/uxNNNz4/root/var/log/snmpd.log
error on subcontainer 'interface container' insert (-1)
error on subcontainer 'interface container' insert (-1)
error on subcontainer 'interface container' insert (-1)
error on subcontainer 'interface container' insert (-1)
error on subcontainer 'interface container' insert (-1)
error on subcontainer 'interface container' insert (-1)
error on subcontainer 'interface container' insert (-1)
error on subcontainer 'interface container' insert (-1)
error on subcontainer 'interface container' insert (-1)
error on subcontainer 'interface container' insert (-1)
This error was reported on OpenSolaris some time ago, reference ...
(http://prefetch.net/blog/index.php/2009/05/10/net-snmp-should-now-work-in-an-opensolaris-non-global-zone) ...
Net-snmp does not work in an opensolaris non-global zone:
+"error on subcontainer ‘interface container’ insert (-1)"+
These errors are caused by opensolaris bug #6640675, which causes all interfaces to be assigned an index value of 0 (this leads net-snmp to think there are duplicate interfaces). The fix was just integrated into Nevada, so hopefully the code will be back ported to Solaris 10.
Example ifconfig in global zone (note index 2 for global and shared-ip VIPs)...
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone ux560z1
inet 127.0.0.1 netmask ff000000
lo0:2: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone ux560z2
inet 127.0.0.1 netmask ff000000
lo0:3: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone ux560z3
inet 127.0.0.1 netmask ff000000
lo0:4: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
zone ux560z4
inet 127.0.0.1 netmask ff000000
nxge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.25.4.2 netmask fffffc00 broadcast 172.25.7.255
ether 0:21:28:ba:9e:e4
nxge0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone ux560z1
inet 172.25.4.3 netmask fffffc00 broadcast 172.25.7.255
nxge0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone ux560z2
inet 172.25.4.4 netmask fffffc00 broadcast 172.25.7.255
nxge0:3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone ux560z3
inet 172.25.4.5 netmask fffffc00 broadcast 172.25.7.255
nxge0:4: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
zone ux560z4
inet 172.25.4.6 netmask fffffc00 broadcast 172.25.7.255
QUESTIONS:
1. Has the bug been reported for Solaris 10 ?
2. Is a Solaris 10 patch available ?
3. Is there a work-around or other ideas to get SMTP working in a Solaris shared-ip zoned.
4. Exclusive-IP should fix it, but does that require a dedicated NIC per zone ?
Thank You,
KW

The CR you cite: 6640675
was fixed in S10 over a year ago. You'll need a contract to get the patch.

Non-global zone sending TCP SYN-ACK packet over wrong interface.

After spending many hours looking at ipmon/ethereal logs, I believe I've found
a explanation (a bug?) for the following strange behaviour (Solaris 10u1):
I've got a non-global zone with Apache2 with dedicated IP and bound to interface e1000g2 of a Sun X4200 box. The global zone has a different dedicated IP bound to a different interface e1000g0.
When I point a browser at the web site, the HTML page often comes up immediately, but sometimes it will hang and only load when I press the reload browser button one or multiple times. This is reproducible with different browsers from different networks with or without DNS resolution. It's reproducible with other non-local zones configured alike and running different TCP based services (namely SSH or non-Apache HTTP).
This is what happens in a failing case (Ethereal client dump "dump_failed.txt" and IPF log "att1.txt" lines 1-3 pp): the incoming TCP SYN comes over interface e1000g2 (correct) and is passed by IPF. However, the non-global zone sends the TCP SYN-ACK package back over interface e1000g0, which is wrong and causes IPF to fail to build a correct state entry. Then, afterwards, the response packets from the webserver will be filtered by IPF, since it has no state entry.
In the success case (Ethereal client dump "dump_success.txt" and IPF log "att1.txt" lines 19-21 pp), the incoming TCP SYN is answered correctly by a TCP SYN-ACK both over interface e1000g2. IPF can build a state entry and all subsequent packets from the webserver reach the client.
=====
The non-global zone has this setup:
zonecfg:ws1> info
...snip...
net:
address: 62.146.25.34
physical: e1000g2
zonecfg:ws1>
=====
The relevant (as of the IPF log) IPF rules are:
rule 1: block out log all
rule 16: pass in log quick proto tcp from any to 62.146.25.34 port = 80 keep state
=====
If I didn't miss an important point, I suspect this to be a bug in Zones and/or IPF.
Any hints?
Thx,
Tobias
"att1.txt":
LINE     PACKET_DT     PACKET_FS     PACKET_IFC     RULE_NUMBER     RULE_ACTION     SOURCE_IP     SOURCE_PORT     DEST_IP     DEST_PORT     PROTOCOL     TCP_FLAGS
1     08.05.2006 21:24:09     786741     e1000g2     16     p     84.56.16.159     60693     62.146.25.34     80     tcp     S
2     08.05.2006 21:24:09     786863     e1000g0     16     p     62.146.25.34     80     84.56.16.159     60693     tcp     AS
3     08.05.2006 21:24:09     808218     e1000g2     16     p     84.56.16.159     60693     62.146.25.34     80     tcp     A
4     08.05.2006 21:24:09     837170     e1000g2     16     p     84.56.16.159     60693     62.146.25.34     80     tcp     AP
5     08.05.2006 21:24:09     837189     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     A
6     08.05.2006 21:24:09     837479     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AP
7     08.05.2006 21:24:12     823801     e1000g2     16     p     84.56.16.159     60693     62.146.25.34     80     tcp     AP
8     08.05.2006 21:24:12     823832     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     A
9     08.05.2006 21:24:13     210039     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AP
10     08.05.2006 21:24:18     839318     e1000g2     16     p     84.56.16.159     60693     62.146.25.34     80     tcp     AP
11     08.05.2006 21:24:18     839351     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     A
12     08.05.2006 21:24:19     970040     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AP
13     08.05.2006 21:24:24     840073     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AF
14     08.05.2006 21:24:30     870503     e1000g2     16     p     84.56.16.159     60693     62.146.25.34     80     tcp     AP
15     08.05.2006 21:24:30     870538     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     A
16     08.05.2006 21:24:33     480059     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AFP
17     08.05.2006 21:24:45     347464     e1000g2     16     p     84.56.16.159     60693     62.146.25.34     80     tcp     AF
18     08.05.2006 21:24:45     347498     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     A
19     08.05.2006 21:24:47     857068     e1000g2     16     p     84.56.16.159     60694     62.146.25.34     80     tcp     S
20     08.05.2006 21:24:47     857118     e1000g2     16     p     62.146.25.34     80     84.56.16.159     60694     tcp     AS
21     08.05.2006 21:24:47     878257     e1000g2     16     p     84.56.16.159     60694     62.146.25.34     80     tcp     A
22     08.05.2006 21:24:47     907630     e1000g2     16     p     84.56.16.159     60694     62.146.25.34     80     tcp     AP
23     08.05.2006 21:24:47     907644     e1000g2     16     p     62.146.25.34     80     84.56.16.159     60694     tcp     A
24     08.05.2006 21:24:47     907892     e1000g2     16     p     62.146.25.34     80     84.56.16.159     60694     tcp     AP
25     08.05.2006 21:24:47     976361     e1000g2     16     p     84.56.16.159     60694     62.146.25.34     80     tcp     AP
26     08.05.2006 21:24:47     976375     e1000g2     16     p     62.146.25.34     80     84.56.16.159     60694     tcp     A
27     08.05.2006 21:24:47     976487     e1000g2     16     p     62.146.25.34     80     84.56.16.159     60694     tcp     AP
28     08.05.2006 21:24:48     127599     e1000g2     16     p     84.56.16.159     60694     62.146.25.34     80     tcp     A
29     08.05.2006 21:24:54     932569     e1000g2     16     p     84.56.16.159     60693     62.146.25.34     80     tcp     AFP
30     08.05.2006 21:24:54     932595     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     A
31     08.05.2006 21:25:00     490052     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AFP
32     08.05.2006 21:25:02     980057     e1000g2     16     p     62.146.25.34     80     84.56.16.159     60694     tcp     AF
33     08.05.2006 21:25:03     1890     e1000g2     16     p     84.56.16.159     60694     62.146.25.34     80     tcp     A
34     08.05.2006 21:25:09     907916     e1000g2     16     p     84.56.16.159     60694     62.146.25.34     80     tcp     AF
35     08.05.2006 21:25:09     907949     e1000g2     16     p     62.146.25.34     80     84.56.16.159     60694     tcp     A
36     08.05.2006 21:25:42     948502     e1000g2     16     p     84.56.16.159     60693     62.146.25.34     80     tcp     AFP
37     08.05.2006 21:25:42     948535     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     A
38     08.05.2006 21:25:54     500051     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AFP
39     08.05.2006 21:26:54     510046     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AFP
40     08.05.2006 21:27:54     520041     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AFP
41     08.05.2006 21:28:54     530040     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AFP
42     08.05.2006 21:29:54     540039     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AFP
43     08.05.2006 21:30:54     550039     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AFP
44     08.05.2006 21:31:54     560041     e1000g2     1     b     62.146.25.34     80     84.56.16.159     60693     tcp     AFP
"dump_failed.txt":
No. Time Source Destination Protocol Info
1 0.000000 192.168.1.101 62.146.25.34 TCP 1079 > http [SYN] Seq=0 Len=0 MSS=1460
Frame 1 (62 bytes on wire, 62 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 48
Identification: 0x0269 (617)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xde9d [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 0, Len: 0
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 0 (relative sequence number)
Header length: 28 bytes
Flags: 0x0002 (SYN)
Window size: 65535
Checksum: 0x5c3c [correct]
Options: (8 bytes)
No. Time Source Destination Protocol Info
2 0.022698 62.146.25.34 192.168.1.101 TCP http > 1079 [SYN, ACK] Seq=0 Ack=1 Win=49368 Len=0 MSS=1452
Frame 2 (62 bytes on wire, 62 bytes captured)
Ethernet II, Src: D-Link_9b:09:44 (00:0d:88:9b:09:44), Dst: FujitsuS_81:79:ea (00:30:05:81:79:ea)
Internet Protocol, Src: 62.146.25.34 (62.146.25.34), Dst: 192.168.1.101 (192.168.1.101)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 48
Identification: 0x002f (47)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 50
Protocol: TCP (0x06)
Header checksum: 0x2ed8 [correct]
Source: 62.146.25.34 (62.146.25.34)
Destination: 192.168.1.101 (192.168.1.101)
Transmission Control Protocol, Src Port: http (80), Dst Port: 1079 (1079), Seq: 0, Ack: 1, Len: 0
Source port: http (80)
Destination port: 1079 (1079)
Sequence number: 0 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 28 bytes
Flags: 0x0012 (SYN, ACK)
Window size: 49368
Checksum: 0xd017 [correct]
Options: (8 bytes)
No. Time Source Destination Protocol Info
3 0.022749 192.168.1.101 62.146.25.34 TCP 1079 > http [ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=0
Frame 3 (54 bytes on wire, 54 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 40
Identification: 0x026a (618)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdea4 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 1, Ack: 1, Len: 0
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0010 (ACK)
Window size: 65535
Checksum: 0x19dc [incorrect, should be 0xbdac]
No. Time Source Destination Protocol Info
4 0.022919 192.168.1.101 62.146.25.34 HTTP GET / HTTP/1.1
Frame 4 (476 bytes on wire, 476 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 462
Identification: 0x026b (619)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdcfd [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 1, Ack: 1, Len: 422
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Next sequence number: 423 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 65535
Checksum: 0x1b82 [incorrect, should be 0xcda5]
Hypertext Transfer Protocol
No. Time Source Destination Protocol Info
5 3.013084 192.168.1.101 62.146.25.34 HTTP [TCP Retransmission] GET / HTTP/1.1
Frame 5 (476 bytes on wire, 476 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 462
Identification: 0x0276 (630)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdcf2 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 1, Ack: 1, Len: 422
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Next sequence number: 423 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 65535
Checksum: 0x1b82 [incorrect, should be 0xcda5]
SEQ/ACK analysis
Hypertext Transfer Protocol
No. Time Source Destination Protocol Info
6 9.029003 192.168.1.101 62.146.25.34 HTTP [TCP Retransmission] GET / HTTP/1.1
Frame 6 (476 bytes on wire, 476 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 462
Identification: 0x027f (639)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdce9 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 1, Ack: 1, Len: 422
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Next sequence number: 423 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 65535
Checksum: 0x1b82 [incorrect, should be 0xcda5]
SEQ/ACK analysis
Hypertext Transfer Protocol
No. Time Source Destination Protocol Info
7 21.060827 192.168.1.101 62.146.25.34 HTTP [TCP Retransmission] GET / HTTP/1.1
Frame 7 (476 bytes on wire, 476 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 462
Identification: 0x0284 (644)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdce4 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 1, Ack: 1, Len: 422
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Next sequence number: 423 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 65535
Checksum: 0x1b82 [incorrect, should be 0xcda5]
SEQ/ACK analysis
Hypertext Transfer Protocol
No. Time Source Destination Protocol Info
8 35.561984 192.168.1.101 62.146.25.34 TCP 1079 > http [FIN, ACK] Seq=423 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=0
Frame 8 (54 bytes on wire, 54 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 40
Identification: 0x029a (666)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xde74 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 423, Ack: 1, Len: 0
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 423 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0011 (FIN, ACK)
Window size: 65535
Checksum: 0x19dc [incorrect, should be 0xbc05]
"dump_success.txt":
No. Time Source Destination Protocol Info
1 0.000000 192.168.1.101 62.146.25.34 TCP 1083 > http [SYN] Seq=0 Len=0 MSS=1460
Frame 1 (62 bytes on wire, 62 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 48
Identification: 0x02a3 (675)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xde63 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1083 (1083), Dst Port: http (80), Seq: 0, Len: 0
Source port: 1083 (1083)
Destination port: http (80)
Sequence number: 0 (relative sequence number)
Header length: 28 bytes
Flags: 0x0002 (SYN)
Window size: 65535
Checksum: 0x70ca [correct]
Options: (8 bytes)
No. Time Source Destination Protocol Info
2 0.020553 62.146.25.34 192.168.1.101 TCP http > 1083 [SYN, ACK] Seq=0 Ack=1 Win=49368 Len=0 MSS=1452
Frame 2 (62 bytes on wire, 62 bytes captured)
Ethernet II, Src: D-Link_9b:09:44 (00:0d:88:9b:09:44), Dst: FujitsuS_81:79:ea (00:30:05:81:79:ea)
Internet Protocol, Src: 62.146.25.34 (62.146.25.34), Dst: 192.168.1.101 (192.168.1.101)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 48
Identification: 0x006b (107)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 50
Protocol: TCP (0x06)
Header checksum: 0x2e9c [correct]
Source: 62.146.25.34 (62.146.25.34)
Destination: 192.168.1.101 (192.168.1.101)
Transmission Control Protocol, Src Port: http (80), Dst Port: 1083 (1083), Seq: 0, Ack: 1, Len: 0
Source port: http (80)
Destination port: 1083 (1083)
Sequence number: 0 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 28 bytes
Flags: 0x0012 (SYN, ACK)
Window size: 49368
Checksum: 0xb530 [correct]
Options: (8 bytes)
No. Time Source Destination Protocol Info
3 0.020599 192.168.1.101 62.146.25.34 TCP 1083 > http [ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=0
Frame 3 (54 bytes on wire, 54 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 40
Identification: 0x02a4 (676)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xde6a [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1083 (1083), Dst Port: http (80), Seq: 1, Ack: 1, Len: 0
Source port: 1083 (1083)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0010 (ACK)
Window size: 65535
Checksum: 0x19dc [incorrect, should be 0xa2c5]
No. Time Source Destination Protocol Info
4 0.020746 192.168.1.101 62.146.25.34 HTTP GET / HTTP/1.1
Frame 4 (476 bytes on wire, 476 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 462
Identification: 0x02a5 (677)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdcc3 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1083 (1083), Dst Port: http (80), Seq: 1, Ack: 1, Len: 422
Source port: 1083 (1083)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Next sequence number: 423 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 65535
Checksum: 0x1b82 [incorrect, should be 0xb2be]
Hypertext Transfer Protocol
No. Time Source Destination Protocol Info
5 0.071290 62.146.25.34 192.168.1.101 TCP http > 1083 [ACK] Seq=1 Ack=423 Win=49368 Len=0
Frame 5 (60 bytes on wire, 60 bytes captured)
Ethernet II, Src: D-Link_9b:09:44 (00:0d:88:9b:09:44), Dst: FujitsuS_81:79:ea (00:30:05:81:79:ea)
Internet Protocol, Src: 62.146.25.34 (62.146.25.34), Dst: 192.168.1.101 (192.168.1.101)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 40
Identification: 0x006c (108)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 50
Protocol: TCP (0x06)
Header checksum: 0x2ea3 [correct]
Source: 62.146.25.34 (62.146.25.34)
Destination: 192.168.1.101 (192.168.1.101)
Transmission Control Protocol, Src Port: http (80), Dst Port: 1083 (1083), Seq: 1, Ack: 423, Len: 0
Source port: http (80)
Destination port: 1083 (1083)
Sequence number: 1 (relative sequence number)
Acknowledgement number: 423 (relative ack number)
Header length: 20 bytes
Flags: 0x0010 (ACK)
Window size: 49368
Checksum: 0xe046 [correct]
No. Time Source Destination Protocol Info
6 0.075838 62.146.25.34 192.168.1.101 HTTP HTTP/1.1 200 OK (text/html)
Frame 6 (413 bytes on wire, 413 bytes captured)
Ethernet II, Src: D-Link_9b:09:44 (00:0d:88:9b:09:44), Dst: FujitsuS_81:79:ea (00:30:05:81:79:ea)
Internet Protocol, Src: 62.146.25.34 (62.146.25.34), Dst: 192.168.1.101 (192.168.1.101)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 399
Identification: 0x006d (109)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 50
Protocol: TCP (0x06)
Header checksum: 0x2d3b [correct]
Source: 62.146.25.34 (62.146.25.34)
Destination: 192.168.1.101 (192.168.1.101)
Transmission Control Protocol, Src Port: http (80), Dst Port: 1083 (1083), Seq: 1, Ack: 423, Len: 359
Source port: http (80)
Destination port: 1083 (1083)
Sequence number: 1 (relative sequence number)
Next sequence number: 360 (relative sequence number)
Acknowledgement number: 423 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 49368
Checksum: 0x29b8 [correct]
Hypertext Transfer Protocol
Line-based text data: text/html
No. Time Source Destination Protocol Info
7 0.095473 192.168.1.101 62.146.25.34 HTTP GET /favicon.ico HTTP/1.1
Frame 7 (407 bytes on wire, 407 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 393
Identification: 0x02aa (682)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdd03 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1083 (1083), Dst Port: http (80), Seq: 423, Ack: 360, Len: 353
Source port: 1083 (1083)
Destination port: http (80)
Sequence number: 423 (relative sequence number)
Next sequence number: 776 (relative sequence number)
Acknowledgement number: 360 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 65176
Checksum: 0x1b3d [incorrect, should be 0x1e0c]
Hypertext Transfer Protocol
No. Time Source Destination Protocol Info
8 0.139786 62.146.25.34 192.168.1.101 TCP http > 1083 [ACK] Seq=360 Ack=776 Win=49368 Len=0
Frame 8 (60 bytes on wire, 60 bytes captured)
Ethernet II, Src: D-Link_9b:09:44 (00:0d:88:9b:09:44), Dst: FujitsuS_81:79:ea (00:30:05:81:79:ea)
Internet Protocol, Src: 62.146.25.34 (62.146.25.34), Dst: 192.168.1.101 (192.168.1.101)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 40
Identification: 0x006e (110)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 50
Protocol: TCP (0x06)
Header checksum: 0x2ea1 [correct]
Source: 62.146.25.34 (62.146.25.34)
Destination: 192.168.1.101 (192.168.1.101)
Transmission Control Protocol, Src Port: http (80), Dst Port: 1083 (1083), Seq: 360, Ack: 776, Len: 0
Source port: http (80)
Destination port: 1083 (1083)
Sequence number: 360 (relative sequence number)
Acknowledgement number: 776 (relative ack number)
Header length: 20 bytes
Flags: 0x0010 (ACK)
Window size: 49368
Checksum: 0xdd7e [correct]
No. Time Source Destination Protocol Info
9 0.144850 62.146.25.34 192.168.1.101 HTTP HTTP/1.1 404 Not Found (text/html)
Frame 9 (464 bytes on wire, 464 bytes captured)
Ethernet II, Src: D-Link_9b:09:44 (00:0d:88:9b:09:44), Dst: FujitsuS_81:79:ea (00:30:05:81:79:ea)
Internet Protocol, Src: 62.146.25.34 (62.146.25.34), Dst: 192.168.1.101 (192.168.1.101)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 450
Identification: 0x006f (111)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 50
Protocol: TCP (0x06)
Header checksum: 0x2d06 [correct]
Source: 62.146.25.34 (62.146.25.34)
Destination: 192.168.1.101 (192.168.1.101)
Transmission Control Protocol, Src Port: http (80), Dst Port: 1083 (1083), Seq: 360, Ack: 776, Len: 410
Source port: http (80)
Destination port: 1083 (1083)
Sequence number: 360 (relative sequence number)
Next sequence number: 770 (relative sequence number)
Acknowledgement number: 776 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 49368
Checksum: 0x7a71 [correct]
Hypertext Transfer Protocol
Line-based text data: text/html
No. Time Source Destination Protocol Info
10 0.269307 192.168.1.101 62.146.25.34 TCP 1083 > http [ACK] Seq=776 Ack=770 Win=64766 [TCP CHECKSUM INCORRECT] Len=0
Frame 10 (54 bytes on wire, 54 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 40
Identification: 0x02af (687)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xde5f [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1083 (1083), Dst Port: http (80), Seq: 776, Ack: 770, Len: 0
Source port: 1083 (1083)
Destination port: http (80)
Sequence number: 776 (relative sequence number)
Acknowledgement number: 770 (relative ack number)
Header length: 20 bytes
Flags: 0x0010 (ACK)
Window size: 64766
Checksum: 0x19dc [incorrect, should be 0x9fbe]

lev wrote:This performance regression renders openvpn with a tun adapter unusable if client and server use kernel 3.14 .
Thus I created a bug report: https://bugs.archlinux.org/task/40089
i actually noticed it to be an "either-or" type of thing; my Windows clients were seeing the same thing coming off a 3.14 openvpn server.
yeah, weird issue. like i noticed spurts of even-powers-of-2 sized packets
Client connecting to 10.10.10.6, TCP port 5001
TCP window size: 416 KByte
[ 3] local 10.10.10.1 port 40643 connected with 10.10.10.6 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 2.0 sec 512 KBytes 2.10 Mbits/sec
[ 3] 2.0- 4.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 4.0- 6.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 6.0- 8.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 8.0-10.0 sec 128 KBytes 524 Kbits/sec
[ 3] 10.0-12.0 sec 128 KBytes 524 Kbits/sec
[ 3] 12.0-14.0 sec 512 KBytes 2.10 Mbits/sec
[ 3] 14.0-16.0 sec 128 KBytes 524 Kbits/sec
[ 3] 16.0-18.0 sec 512 KBytes 2.10 Mbits/sec
[ 3] 18.0-20.0 sec 128 KBytes 524 Kbits/sec
[ 3] 20.0-22.0 sec 384 KBytes 1.57 Mbits/sec
[ 3] 22.0-24.0 sec 256 KBytes 1.05 Mbits/sec
[ 3] 24.0-26.0 sec 512 KBytes 2.10 Mbits/sec
[ 3] 26.0-28.0 sec 384 KBytes 1.57 Mbits/sec
[ 3] 28.0-30.0 sec 256 KBytes 1.05 Mbits/sec
[ 3] 30.0-32.0 sec 128 KBytes 524 Kbits/sec
[ 3] 32.0-34.0 sec 640 KBytes 2.62 Mbits/sec
[ 3] 34.0-36.0 sec 384 KBytes 1.57 Mbits/sec
[ 3] 36.0-38.0 sec 384 KBytes 1.57 Mbits/sec
[ 3] 38.0-40.0 sec 384 KBytes 1.57 Mbits/sec
[ 3] 40.0-42.0 sec 128 KBytes 524 Kbits/sec

Reg. JSF Spring Integration issue.

Hi All,
I am using JSF for the front end and using the Spring Core, DAO and AOP for the BO and DAO layers. When i try to inject the Objects using the DI to the JSF, i am getting the following error and the objects are not getting set from the Spring.
Error Log:*
javax.servlet.ServletException: Unable to create managed bean dataUploadControllerBean. The following problems were found:
- Bean or property class #{dataUploadVO} for managed bean dataUploadControllerBean cannot be found.
- Bean or property class #{dataUploadVO} for managed bean dataUploadControllerBean cannot be found.
- Bean or property class #{dataUploadVO} for managed bean dataUploadControllerBean cannot be found.
javax.faces.webapp.FacesServlet.service(FacesServlet.java:325)
org.apache.myfaces.component.html.util.ExtensionsFilter.doFilter(ExtensionsFilter.java:112)
i have defined the respective entries correctly to integrate the JSF & Spring. But still the JSF&Spreing is not integrated successfully. Please find the configs defined and help to resolve the issue. i am stuck in this for 2 days...
Web.xml
<listener>
<listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
</listener>
<context-param>
<param-name>contextConfigLocation</param-name>
<param-value>WEB-INF/applicationContext.xml</param-value>
</context-param>
Faces-Config.xml
<application>
<el-resolver>org.springframework.web.jsf.el.SpringBeanFacesELResolver</el-resolver> 
</application>
<managed-bean>
<managed-bean-name>dataUploadControllerBean</managed-bean-name>
<managed-bean-class>com.sgspace.model.dataupload.DataUploadControllerBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
<managed-property>
<property-name>dataUploadBean</property-name>
<value>#{dataUploadBean}</value> __ </managed-property>
<managed-property>
<property-name>dataUploadVO</property-name>
<property-class>#{dataUploadVO}</property-class> __
<value></value>
</managed-property>
<managed-property>
<property-name>dataUploadBO</property-name>
<property-class>#{dataUploadBO}</property-class>__ <value></value>
</managed-property>
</managed-bean>
applicationContext.xml:_
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:p="http://www.springframework.org/schema/p"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:tx="http://www.springframework.org/schema/tx"
xmlns:aop="http://www.springframework.org/schema/aop"
xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.0.xsd
http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.0.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd">
<bean id="dataUploadDAO"
class="com.sgspace.dao.dataupload.DataUploadDAOImpl">
<property name="dataSource" ref="dataSource"></property>
</bean>
<bean id="dataUploadBO"
class="com.sgspace.bo.dataupload.DataUploadBOImpl">
<property name="dataUploadDAO" ref="dataUploadDAO"></property>
</bean>
<bean id="dataUploadVO" class="com.sgspace.vo.dataupload.DataUploadVO"></bean>
</beans>
Warm Regards,
Praveen S

The TestBean have a property for DeviceManager along with setter/getter methods as shown below. Sorry for not including in earlier posting
TestBean.java (Backing Bean)
private DeviceTypeManager deviceManager;
public DeviceTypeManager getDeviceManager() {
return deviceManager;
public void setDeviceManager(DeviceTypeManager deviceManager) {
this.deviceManager = deviceManager;
Here are the two scenarios
Scenario 1 : without <managed-property> the code works fine
Scenario 2 : with <managed-property> the code results in following error
javax.faces.FacesException: Cannot get value for expression '#{test.selectedDevice}'
Scenario 1 has only JSF whereas Scenario 2 has JSF-Spring integration
The Scenario 1 works absolutely fine as the expression '#{test.selectedDevice}' gets its value from setter/getter method in the backing bean(TestBean.java) . This is expected behaviour & wondering why it doesn't work similarly in Scenario 2 instead it complains
Cannot get value for expression '#{test.selectedDevice}'
I am willing to upload the war file. Any pointers/suggestions in resolving the error will be highly appreciated
Regards
Bansi

Global Component - How is it thread safe?

While a global component is serving many sessions and in turn many requests, how is the thread safety guaranteed? How the call stack is maintained?

It's often possible to write a global component that is thread safe without using locks or synchronize. As long as the component's class member variables are set globally, e.g., via Nucleus configuration, and all thread-specific values are held in method variables (which are housed on the stack), the component is thread safe. If thread-specific values need to be accessed by multiple methods in the class, the values must be passed as formal method parameters rather than through class member variables. Most of the global components that ship in the ATG product stack follow this coding pattern and do not use any kind of locks.

Subcontract PO/PR does not generate PR for non stock component

Hello,
I need help on above topic.
SAP Version is ERP Central Component 5.0.
My problem is that PR is not being generated for non stock component in PR/PO of higher/parent material.
I notice that in component overview screen the item cat for this non stk comp. has changed to T( text item) even though the BOm has been maintained with item cat as N( non stock). The material type being used for non stk material is custom developed(copy of NLAG).
Has anyone faced similar issue. or can suggest some missing customization (if any)
Just to confirm :
I have done customising for Direct procurement in OPPQ to trigger PR in requirements planning. Also tried with prod order creation option(though my case is PO creation)
Any help from forum is highly appreciated.
Thanks,
Ram

Hi ,
Commitement check is taking place due to availability control. If u dont want to carry out AVAC for PR then in Tolerance limit put the exclude the check for PR.
SPRO > PS > Budget > define tolerence limit > here u might selected ++ i.e. for all activity type. U select indidula transaction grp excluding PR.
Rgds

PHP in Solaris 10 and Non-Global Zones: Problem of performance?

Hi friends
We are feeling a poor performance with applications developed with PHP in Solaris 10, with non-global and global zones, while Intel platform (Xeon and Pentium), performance is very good. Difference between both platforms is about 200% aprox, one second in Intel to 9, 12 or 20 seconds in Solaris depending of model.
Our tests were developed in:
1. SF T2000 server Solaris 10 global zone
2. SF T2000 server Solaris 10 non-global zone
3. SF280R server Solaris 10 non-global zone
4. V240 server with 1 GB memory, 1*US III-i 1.0 GHz and Solaris 9 (really this version for test and comparisons)
5. V240 server with 8GB memory, 2*US III-i 1.5Ghz and Solaris 9 (really this version for test and comparisons too)
Intel platforms were:
1. Intel Pentium 4 2GHz 2GB memory, Linux Fedora and PHP 4.4.4
2. Intel Xeon 2 core, 2.33GHz 2GB memory, Linux Fedora and PHP 4.4.3
Versions of products are:
1. Solaris 9 or Solaris 10
2. PHP 4.4.7 downloaded from http://www.php.net/downloads.php
3. Apache 2.0.59
4. MySQL 4.1.15-log
Our php compilation and installation were:
./configure --prefix=/usr/local/php-4.4.7 \
--with-pear \
--with-openssl=/usr/local/ssl \
--with-gettext \
--with-ldap=/usr/local \
--with-iconv \
--enable-ftp \
--with-dom \
--with-mime-magic \
--enable-mbstring \
--with-zlib \
--enable-track-vars \
--enable-sigchild \
--disable-ctype \
--disable-overload \
--disable-tokenizer \
--disable-posix \
--with-gd \
--with-apxs2=/usr/local/apache2.0.53/bin/apxs \
--with-mysql \
--with-pgsql \
--with-oci8=/oracle/product/9.2.0 \
--with-oracle=/oracle/product/9.2.0 \
--with-png-dir=/usr/local \
--with-zlib-dir=/usr/local \
--with-freetype-dir=/usr/local \
--with-jpeg-dir=/usr/local
make
make install
Questions:
Is there any problem of PHP with SunFire T2000 servers or 64-bits platforms?
Is there any flag of PHP would be use to compilarion PHP in 64-bits or multithread?
I wait for any comments or suggestions about our problem with PHP compilation and performance in Solaris 10. Thanks a lot.
Sergio.

I presume you compiled php on the Sun server, was this done using gcc or the Sun One C compiler.
If the latter then you can also use the flag: --enable-nonportable-atomics when you run configure

Lucreate not working with ZFS and non-global zones

I replied to this thread: Re: lucreate and non-global zones as to not duplicate content, but for some reason it was locked. So I'll post here... I'm experiencing the exact same issue on my system. Below is the lucreate and zfs list output.
# lucreate -n patch20130408
Creating Live Upgrade boot environment...
Analyzing system configuration.
No name for current boot environment.
INFORMATION: The current boot environment is not named - assigning name <s10s_u10wos_17b>.
Current boot environment is named <s10s_u10wos_17b>.
Creating initial configuration for primary boot environment <s10s_u10wos_17b>.
INFORMATION: No BEs are configured on this system.
The device </dev/dsk/c1t0d0s0> is not a root device for any boot environment; cannot get BE ID.
PBE configuration successful: PBE name <s10s_u10wos_17b> PBE Boot Device </dev/dsk/c1t0d0s0>.
Updating boot environment description database on all BEs.
Updating system configuration files.
Creating configuration for boot environment <patch20130408>.
Source boot environment is <s10s_u10wos_17b>.
Creating file systems on boot environment <patch20130408>.
Populating file systems on boot environment <patch20130408>.
Temporarily mounting zones in PBE <s10s_u10wos_17b>.
Analyzing zones.
WARNING: Directory </zones/APP> zone <global> lies on a filesystem shared between BEs, remapping path to </zones/APP-patch20130408>.
WARNING: Device <tank/zones/APP> is shared between BEs, remapping to <tank/zones/APP-patch20130408>.
WARNING: Directory </zones/DB> zone <global> lies on a filesystem shared between BEs, remapping path to </zones/DB-patch20130408>.
WARNING: Device <tank/zones/DB> is shared between BEs, remapping to <tank/zones/DB-patch20130408>.
Duplicating ZFS datasets from PBE to ABE.
Creating snapshot for <rpool/ROOT/s10s_u10wos_17b> on <rpool/ROOT/s10s_u10wos_17b@patch20130408>.
Creating clone for <rpool/ROOT/s10s_u10wos_17b@patch20130408> on <rpool/ROOT/patch20130408>.
Creating snapshot for <rpool/ROOT/s10s_u10wos_17b/var> on <rpool/ROOT/s10s_u10wos_17b/var@patch20130408>.
Creating clone for <rpool/ROOT/s10s_u10wos_17b/var@patch20130408> on <rpool/ROOT/patch20130408/var>.
Creating snapshot for <tank/zones/DB> on <tank/zones/DB@patch20130408>.
Creating clone for <tank/zones/DB@patch20130408> on <tank/zones/DB-patch20130408>.
Creating snapshot for <tank/zones/APP> on <tank/zones/APP@patch20130408>.
Creating clone for <tank/zones/APP@patch20130408> on <tank/zones/APP-patch20130408>.
Mounting ABE <patch20130408>.
Generating file list.
Finalizing ABE.
Fixing zonepaths in ABE.
Unmounting ABE <patch20130408>.
Fixing properties on ZFS datasets in ABE.
Reverting state of zones in PBE <s10s_u10wos_17b>.
Making boot environment <patch20130408> bootable.
Population of boot environment <patch20130408> successful.
Creation of boot environment <patch20130408> successful.
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 16.6G 257G 106K /rpool
rpool/ROOT 4.47G 257G 31K legacy
rpool/ROOT/s10s_u10wos_17b 4.34G 257G 4.23G /
rpool/ROOT/s10s_u10wos_17b@patch20130408 3.12M - 4.23G -
rpool/ROOT/s10s_u10wos_17b/var 113M 257G 112M /var
rpool/ROOT/s10s_u10wos_17b/var@patch20130408 864K - 110M -
rpool/ROOT/patch20130408 134M 257G 4.22G /.alt.patch20130408
rpool/ROOT/patch20130408/var 26.0M 257G 118M /.alt.patch20130408/var
rpool/dump 1.55G 257G 1.50G -
rpool/export 63K 257G 32K /export
rpool/export/home 31K 257G 31K /export/home
rpool/h 2.27G 257G 2.27G /h
rpool/security1 28.4M 257G 28.4M /security1
rpool/swap 8.25G 257G 8.00G -
tank 12.9G 261G 31K /tank
tank/swap 8.25G 261G 8.00G -
tank/zones 4.69G 261G 36K /zones
tank/zones/DB 1.30G 261G 1.30G /zones/DB
tank/zones/DB@patch20130408 1.75M - 1.30G -
tank/zones/DB-patch20130408 22.3M 261G 1.30G /.alt.patch20130408/zones/DB-patch20130408
tank/zones/APP 3.34G 261G 3.34G /zones/APP
tank/zones/APP@patch20130408 2.39M - 3.34G -
tank/zones/APP-patch20130408 27.3M 261G 3.33G /.alt.patch20130408/zones/APP-patch20130408

I replied to this thread: Re: lucreate and non-global zones as to not duplicate content, but for some reason it was locked. So I'll post here...The thread was locked because you were not replying to it.
You were hijacking that other person's discussion from 2012 to ask your own new post.
You have now properly asked your question and people can pay attention to you and not confuse you with that other person.

Non-Global Zones - how can I tell what the Global Zone is

Hi,
I have a host that I know is a non-global zone (ngz). I can ssh to the ngz as root or a non-privileged user.
But once there how do I know what the host name for the global zone is?
I could probably run a script from all global zones to report all running zones and so I'd know that way but I have a specific need to know from inside the ngz.
Thanks!
Brian

bdunbar wrote:
That's a built-in security feature; and I know of no way to circumvent this mechanism.
I had some hope that there was a way to 'see' at least the global-zone information from the zone. From the shell the 'zone' commands are available ..
:# zoneadm list -cv
ID NAME STATUS PATH
48 hostname_svn running / So it's at least aware that it is a zone, even if it can't tell me anything else about itself. I can still go the long way around to get the information for my need, thanks.
The global zone is the only thing that can see everything. The non-global zones can only see information specific to their zone.
This is by design and it really is a security mechanism. You don't want the zones running outside of their boundaries and information about the global zone (or any other zone) is outside the boundaries of a non-global zone.
Cheers,

Weblogic 10.3TP, JAX-WS and Spring integration

Hi all
We are using JAX-WS and Spring (2.0.6) and our target platform will be Weblogic 10.3. We would like to benefit from Spring injection in our web service classes. However I cannot get it to work. I follow the instructions described here: [url https://jax-ws-commons.dev.java.net/spring]https://jax-ws-commons.dev.java.net/spring and I use version 1.7 of jaxws-spring
When deploying the sample project I get the following error:
2007-12-06 09:28:42,238 ERROR [org.springframework.web.context.ContextLoader] - Context initialization failed
org.springframework.beans.factory.BeanCreationException:
Error creating bean with name 'com.sun.xml.ws.transport.http.servlet.SpringBinding' defined in ServletContext resource [WEB-INF/applicationContext.xml]:
Cannot create inner bean '(inner bean)' of type [org.jvnet.jax_ws_commons.spring.SpringService] while setting bean property 'service';
nested exception is org.springframework.beans.factory.BeanCreationException:
Error creating bean with name '(inner bean)': FactoryBean threw exception on object creation;
nested exception is java.lang.ClassCastException: org.jvnet.jax_ws_commons.spring.SpringService$ContainerWrapper cannot be cast to weblogic.wsee.jaxws.WLSContainer
Caused by:
org.springframework.beans.factory.BeanCreationException: Error creating bean with name '(inner bean)': FactoryBean threw exception on object creation;
nested exception is java.lang.ClassCastException: org.jvnet.jax_ws_commons.spring.SpringService$ContainerWrapper cannot be cast to weblogic.wsee.jaxws.WLSContainer
Caused by:
java.lang.ClassCastException: org.jvnet.jax_ws_commons.spring.SpringService$ContainerWrapper cannot be cast to weblogic.wsee.jaxws.WLSContainer
        at weblogic.wsee.jaxws.framework.policy.WSDLGeneratorExtension.start(WSDLGeneratorExtension.java:113)
        at com.sun.xml.ws.wsdl.writer.WSDLGeneratorExtensionFacade.start(WSDLGeneratorExtensionFacade.java:67)
        at com.sun.xml.ws.wsdl.writer.WSDLGenerator.generateDocument(WSDLGenerator.java:353)
        at com.sun.xml.ws.wsdl.writer.WSDLGenerator.doGeneration(WSDLGenerator.java:276)
        at com.sun.xml.ws.server.EndpointFactory.generateWSDL(EndpointFactory.java:427)
        at com.sun.xml.ws.server.EndpointFactory.createEndpoint(EndpointFactory.java:196)
        at com.sun.xml.ws.api.server.WSEndpoint.create(WSEndpoint.java:467)
        at org.jvnet.jax_ws_commons.spring.SpringService.getObject(SpringService.java:333)
        at org.jvnet.jax_ws_commons.spring.SpringService.getObject(SpringService.java:45)
        at org.springframework.beans.factory.support.AbstractBeanFactory.getObjectFromFactoryBean(AbstractBeanFactory.java:1236)
        at org.springframework.beans.factory.support.AbstractBeanFactory.getObjectForBeanInstance(AbstractBeanFactory.java:1207)
        at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveInnerBean(BeanDefinitionValueResolver.java:219)
...It sounds like JAX-WS - Spring integration is not supported in Weblogic 10.3TP.
Has anyone been able to get the sample project working?
Does anyone know if the final version of Weblogic 10.3 will have JAX-WS Spring injection support?
Thanks
Dries

anybody can help?
thanks

Make non-global zone svcs persistant accross reboots

Q: Solaris 10 services such as telnet will need to be enabled after installation of non-glabal zones. Command "svcs enable telnet" did not leave telnet enabled after rebooting a non-global zone. Any suggestions? Thanks.

Did you do the "svcs enable telnet" while zlogin'ed to the zone.
If so it should have worked.

Is it possible to patch Global Zone and only specific Non-Global Zones?

Hi Champs,
Is it possible to patch Global Zone and only specific Non-Global Zones? Idea is to patch DEV-zones only on the system & test applications and then patch only the STG-zones on same server!
Not sure if it is possible but just throwing a question...
Cheers,
Nitin

M10vir wrote:
Yes, if you have branded (non-sparse) zone!Branded zones and sparse zones don't have the relation that you imply. In Solaris 10, native zones can be sparse or whole-root (non-sparse, as you say). Zones that are not native zones are branded zones. Branded zones on Solaris 10 include Solaris Legacy Containers, previously known as Solaris 8 Containers and Solaris 9 Containers. That add-on product allows you to run Solaris 8 and Solaris 9 application environments under a thin layer of virtualization provided by the brands framework. solaris8 and solaris9 branded zones can be patched independently of each other and of the global zone.
Solaris 11 has no "native zones" - all zones use the brands framework. The "solaris" brand does no emulation and in that respect is very similar to native zones on Solaris 10. Solaris 11 also provides Solaris 10 Zones via the solaris10 brand. This allows zones or the global zone from a Solaris 10 system to be transferred to a Solaris 11 system and run as solaris10 zones. When running on Solaris 11, solaris10 zones can each be patched independently from each other and the Solaris 11 global zone. Technically, Solaris 11 doesn't have patches - it just has newer versions of packages to which the system is updated.

Ssh takes me to the global zone instead of the non-global zone

I have set up my first Solaris 10 server with a new zone. The ce device is set up on the zone as well as the global zone.
Output from ifconfig on the global zone:
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.16.1.217 netmask ffffff00 broadcast 172.16.1.255
ether 0:3:ba:f2:a1:54
ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 172.16.1.199 netmask ffffff00 broadcast 172.16.1.255
ether 0:3:ba:f2:a1:54
Output from the non-global zone:
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.16.1.199 netmask ffff0000 broadcast 172.16.255.255
ether 0:3:ba:f2:a1:54
When I ssh into the non-global zone, I end up in the global zone? Can I ssh straight into the non-global zone? Am I missing something in the zone setup that keeps me from being able to ssh into the non-global zone?
Any help is appreciated. I have been racking my brain on this for several hours.
Thanks ahead of time.

TAdriver wrote:
The one thing I have found in the documentation is that if you set the network as an exclusive IP, you can only assign the physical name using zonecfg. You can't set the IP address or the default router. In fact, if you try to set either of those, you get an error saying you can't set those using an exclusive IP type.Correct. When doing a shared-IP zone, the zone has no privileges to do IP-level things. So the global zone (via the zone configuration) creates the virtual interface and sets the IP address. Then when the zone is booted, the interface is given to it.
With an exclusive-IP zone, the zone can do all this work itself. From its perspective, it's handed an interface like a regular machine. So the IP settings are done within the zone (/etc/hosts, /etc/hostname.XXX, /etc/netmasks).
Darren

Non-Global component resolution in ATG-Spring Integration

Similar Messages

Maybe you are looking for