Noob Needs Help with File Size
I created a simple form with no graphics, fonts are not embedded, and I selected the file to be filled out, printed, then mailed. The file size is 21MB. The form is to be emailed so it must be much smaller in size. Once received, the user will fill it out electronicly, print the form, then mail it back to me regular postal mail. Why is the file size so large and how can I make it smaller? Thanks in advance.
Kevin
OK. Here's what I did:
1. At the welcome screen I selected "New Form" and then "New Blank Form"
2. For the page size I left it at "Default" which is 8.5 x 11.
3. For Return Method I selected "Fill then Print".
4. At the last screen I just clicked "OK".
5. Then I built the form. I put in (9) Text boxes, (4) Text Fields that look like Sunken Boxes, (5) Numeric Fields that look like Sunken Boxes, and (3) Check Boxes that look like Sunken Boxes.
6. I then saved the file as a Static PDF Form File.
7. The file size is 22.5 MB.
That was my second attempt. The first attempt I had the fonts embedded and I had a Logo on the form. The file size for that one was 27.3 MB.
Thanks for the help.
Kevin
Similar Messages
-
How do you reduce pdf size file when it's save? I can have a excel spreadsheet that is 67KB and when I save it as pdf file increases to 289KB?
I agree that the file size is not a big issue at 289kB. However, a lot of the size depends on the content and the job settings that have been used. It is a good practice in PDFs to embed the fonts and that may be what is causing the size increased in your PDF. You can use PDF Optimize (under the Save As menu in AAX) to access the audit function and find out what is causing the size issue. As mentioned, for the file at hand it is not much of an issue, but may be for future projects.
-
Need Help With File Matching Records
I need help with my file matching program.
Here is how it suppose to work: FileMatch class should contain methods to read oldmast.txt and trans.txt. When a match occurs (i.e., records with the same account number appear in both the master file and the transaction file), add the dollar amount in the transaction record to the current balance in the master record, and write the "newmast.txt" record. (Assume that purchases are indicated by positive amounts in the transaction file and payments by negative amounts.)
When there is a master record for a particular account, but no corresponding transaction record, merely write the master record to "newmast.txt". When there is a transaction record, but no corresponding master record, print to a log file the message "Unmatched transaction record for account number ..." (fill in the account number from the transaction record). The log file should be a text file named "log.txt".
Here is my following program code:
// Exercise 14.8: CreateTextFile.java
// creates a text file
import java.io.FileNotFoundException;
import java.lang.SecurityException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class CreateTextFile
private Formatter output1; // object used to output text to file
private Formatter output2; // object used to output text to file
// enable user to open file
public void openTransFile()
try
output1 = new Formatter("trans.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
output2 = new Formatter("oldmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openOldMastFile
// add transaction records to file
public void addTransactionRecords()
// object to be written to file
TransactionRecord record1 = new TransactionRecord();
Scanner input1 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0) and amount.","? ");
while (input1.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record1.setAccount(input1.nextInt()); // read account number
record1.setAmount(input1.nextDouble()); // read amount
if (record1.getAccount() > 0)
// write new record
output1.format("%d %.2f\n", record1.getAccount(), record1.getAmount());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input1.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0) ",
"and amount.","? ");
} // end while
} // end method addTransactionRecords
// add account records to file
public void addAccountRecords()
// object to be written to file
AccountRecord record2 = new AccountRecord();
Scanner input2 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0), first name, last name and balance.","? ");
while (input2.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record2.setAccount(input2.nextInt()); // read account number
record2.setFirstName(input2.next()); // read first name
record2.setLastName(input2.next()); // read last name
record2.setBalance(input2.nextDouble()); // read balance
if (record2.getAccount() > 0)
// write new record
output2.format("%d %s %s %.2f\n", record2.getAccount(), record2.getFirstName(),
record2.getLastName(), record2.getBalance());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input2.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0),",
"first name, last name and balance.","? ");
} // end while
} // end method addAccountRecords
// close file
public void closeTransFile()
if (output1 != null)
output1.close();
} // end method closeTransFile
// close file
public void closeOldMastFile()
if (output2 != null)
output2.close();
} // end method closeOldMastFile
} // end class CreateTextFile--------------------------------------------------------------------------------------------------
// Exercise 14.8: CreateTextFileTest.java
// Testing class CreateTextFile
public class CreateTextFileTest
// main method begins program execution
public static void main( String args[] )
CreateTextFile application = new CreateTextFile();
application.openTransFile();
application.addTransactionRecords();
application.closeTransFile();
application.openOldMastFile();
application.addAccountRecords();
application.closeOldMastFile();
} // end main
} // end class CreateTextFileTest-------------------------------------------------------------------------------------------------
// Exercise 14.8: TransactionRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
public class TransactionRecord
private int account;
private double amount;
// no-argument constructor calls other constructor with default values
public TransactionRecord()
this(0,0.0); // call two-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public TransactionRecord(int acct, double amt)
setAccount(acct);
setAmount(amt);
} // end two-argument TransactionRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set amount
public void setAmount(double amt)
amount = amt;
} // end method setAmount
// get amount
public double getAmount()
return amount;
} // end method getAmount
} // end class TransactionRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: AccountRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
import org.egan.TransactionRecord;
public class AccountRecord
private int account;
private String firstName;
private String lastName;
private double balance;
// no-argument constructor calls other constructor with default values
public AccountRecord()
this(0,"","",0.0); // call four-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public AccountRecord(int acct, String first, String last, double bal)
setAccount(acct);
setFirstName(first);
setLastName(last);
setBalance(bal);
} // end four-argument AccountRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set first name
public void setFirstName(String first)
firstName = first;
} // end method setFirstName
// get first name
public String getFirstName()
return firstName;
} // end method getFirstName
// set last name
public void setLastName(String last)
lastName = last;
} // end method setLastName
// get last name
public String getLastName()
return lastName;
} // end method getLastName
// set balance
public void setBalance(double bal)
balance = bal;
} // end method setBalance
// get balance
public double getBalance()
return balance;
} // end method getBalance
// combine balance and amount
public void combine(TransactionRecord record)
balance = (getBalance() + record.getAmount());
} // end method combine
} // end class AccountRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatch.java
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import java.util.Formatter;
import java.util.FormatterClosedException;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class FileMatch
private Scanner inTransaction;
private Scanner inOldMaster;
private Formatter outNewMaster;
private Formatter theLog;
// enable user to open file
public void openTransFile()
try
inTransaction = new Scanner(new File("trans.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
inOldMaster = new Scanner(new File("oldmast.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openOldMastFile
// enable user to open file
public void openNewMastFile()
try
outNewMaster = new Formatter("newmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openNewMastFile
// enable user to open file
public void openLogFile()
try
theLog = new Formatter("log.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openLogFile
// update records
public void updateRecords()
TransactionRecord transaction = new TransactionRecord();
AccountRecord account = new AccountRecord();
try // read records from file using Scanner object
System.out.println("Start file matching.");
while (inTransaction.hasNext() && inOldMaster.hasNext())
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
account.setAccount(inOldMaster.nextInt()); // read account number
account.setFirstName(inOldMaster.next()); // read first name
account.setLastName(inOldMaster.next()); // read last name
account.setBalance(inOldMaster.nextDouble()); // read balance
if (transaction.getAccount() == account.getAccount())
while (inTransaction.hasNext() && transaction.getAccount() == account.getAccount())
account.combine(transaction);
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
else if (transaction.getAccount() != account.getAccount())
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
theLog.format("%s%d","Unmatched transaction record for account number ",transaction.getAccount());
} // end while
System.out.println("Finish file matching.");
} // end try
catch (NoSuchElementException elementException)
System.err.println("File improperly formed.");
inTransaction.close();
inOldMaster.close();
System.exit(1);
} // end catch
catch (IllegalStateException stateException)
System.err.println("Error reading from file.");
System.exit(1);
} // end catch
} // end method updateRecords
// close file and terminate application
public void closeTransFile()
if (inTransaction != null)
inTransaction.close();
} // end method closeTransFile
// close file and terminate application
public void closeOldMastFile()
if (inOldMaster != null)
inOldMaster.close();
} // end method closeOldMastFile
// close file
public void closeNewMastFile()
if (outNewMaster != null)
outNewMaster.close();
} // end method closeNewMastFile
// close file
public void closeLogFile()
if (theLog != null)
theLog.close();
} // end method closeLogFile
} // end class FileMatch-------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatchTest.java
// Testing class FileMatch
public class FileMatchTest
// main method begins program execution
public static void main( String args[] )
FileMatch application = new FileMatch();
application.openTransFile();
application.openOldMastFile();
application.openNewMastFile();
application.openLogFile();
application.updateRecords();
application.closeLogFile();
application.closeNewMastFile();
application.closeOldMastFile();
application.closeTransFile();
} // end main
} // end class FileMatchTest-------------------------------------------------------------------------------------------------
Sample data for master file:
Master file
Account Number Name Balance
100 Alan Jones 348.17
300 Mary Smith 27.19
500 Sam Sharp 0.00
700 Suzy Green -14.22Sample data for transaction file:
Transaction file Transaction
Account Number Amount
100 27.14
300 62.11
300 83.89
400 100.56
700 80.78
700 1.53
900 82.17 -------------------------------------------------------------------------------------------------
My FileMatch class program above has bugs in it.
The correct results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 173.19
500 Sam Sharp 0.00
700 Suzy Green 68.09The correct results for the log.txt:
Unmatched transaction record for account number 400Unmatched transaction record for account number 900------------------------------------------------------------------------------------------------
My results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 111.08
500 Sam Sharp 0.00
700 Suzy Green -12.69My results for the log.txt
Unmatched transaction record for account number 700-------------------------------------------------------------------------------------------------
I am not sure what is wrong with my code above to make my results different from the correct results.
Much help is appreciated. Please help.From the output, it looks like one problem is just formatting -- apparently you're including a newline in log entries and not using tabs for the newmast output file.
As to why the numbers are off -- just from glancing over it, it appears that the problem is when you add multiple transaction values. Since account.combine() is so simple, I suspect that you're either adding creating transaction objects incorrectly or not creating them when you should be.
Create test input data that isolates a single case of this (e.g., just the Mary Smith case), and then running your program in a debugger or adding debugging code to the add/combine method, so you can see what's happening in detail.
Also I'd recommend reconsidering your design. It's a red flag if a class has a name with "Create" in it. Classes represent bundles of independant state and transformations on that state, not things to do. -
I have PhotoShop Elements 10, and I am trying to watermark some of my photos, I have successfully added them one at a time with a font large enough to be seen. Now I am trying to add it using the "process multiple files" , I can do that but the font even at 72 the largest setting is so small on the photo you can barely read it! Can anyone help me the size larger on my photos?
Thank you, Michael. I just watched the Russell Brown video again for CS6 and looked real closely at his settings in ACR and he was using 240ppi. I changed my file in image size to 240 ppi and then ran the script and the layer didn't change size this time when I ran the script.
It is kind of annoying to have to change the image size everytime I want to run this script and then change it back again as most of my files are 300 ppi. I used to run his script for edit in ARC in CS5 and recall that if I just remembered to change the settings in ARC to 300 ppi while the script was playing and before pressing 'open' that the image wouldn't change size during the raw processing, but this doesn't seem to be working in CS6. Do you know of a way to use this script and not have to change the ppi for the image to 240?
Thanks again. -
Need help reducing file size.
We're using Acrobat 8 Standard and are able to reduce an 8 MB file down to 7 MB but a fellow employee with Acrobat 9 Pro was able to reduce the size of the same file to 1.8 MB. We're doing the same function (Reduce File Size) in both apps so we're not sure why there's such a big difference in finished file sizes between the two programs. Is there a setting in Acrobat 8 Stnd that we're missing to be able to drop the file size much closer to what Acrobat 9 Pro can achieve?
Any help would be greatly appreciated.
Thank you!There are a lot of factors that can affect file size. PDF Optimize allows you more control over those options that does the Reduce File Size. With PDF Optimize, you can do an audit of the PDF to see what is taking up a lot of the size. Things that can affect the size include:
1. Image resolution (PDF Optimize can reduce)
2. Embedded fonts (subset fonts recommended to reduce size - leaving the fonts out is not a good idea)
- Other?
That may help some. When you compare how different machines or versions of Acrobat do the file reduction, you need to simply review all of the options that are being used. Sometimes, you can get a reduction by reprinting to a new PDF, but that is not a perfect process either. -
Noob needs help with Logic and Motu live setup.
Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
ChrisYou'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro. -
Windows Update Helps with File Size Issues?
I'm just wondering if anybody has recently noticed an
improvement related to the file size issue variously reported
throughout the forums?
I ask because our IT folks distributed a Windows update on 2
days last week and since the application of those updates I have
not experienced the freakishly large file sizes and the related
performance issues in Captivate. Unfortunately I don't have any of
the details of what patch(es) were installed, as it was part of our
boot script one morning and I didn't even realize it was updating
until I received the Reboot Now or Later alert.
Anyway, I was curious because I have experienced significant
performance improvement since then.
RoryIf you are using a remote workflow ... designers are sending off-site editors InCopy Assignment packages (ICAPs) .... then they need to create assignments in order to package them for the remote InCopy user. So there's no need to split up a layout into smaller files or anything. An assignment is a subset of the INDD file; multiple assignments -- each encompassing different pages or sections -- are created from the same INDD file.
When the designer creates the assignment, have them turn off "Include original images in packages"; that should keep the file size down.
Or -- like Bob said -- you can avoid the whole remote workflow/assignment package rigamarole all together by just keeping the file in a project folder in the Dropbox folder on teh designer's local hard drive, and have them share the project folder with the editors. In that workflow, editors open the INDD file on their local computer and check out stories, just as though they were opening them from a networked file server.
I cover how the InCopy Dropbox workflow works in a tutorial video (within the Remote Workflows chapter) on Lynda.com here:
http://www.lynda.com/tutorial/62220
AM -
Cs5: upgrading from CS2 to CS5 PC to Mac...need help shrinking file sizes
I am designing wallpapers for cellphones and was given very specific guidelines of various dimensions and file size (based on the different devices), 96 dpi, and PNG format. When working on my PC using Ps CS2, I would drag or copy/paste images from AI (CS I think) into PS. I found that the file size was lower when doing that. I would then do a "save as", and successfully keep to the given specs.
When I tried this on my Mac, using an image that I previously saved on my pc as a test, the file sizes were always over what they needed to be. I can't seem to figure out what the difference could be. I couldn't do a "save for web" because the dpi would come back as 72 when the file is opened. I tried that once and I was told to re-save the images again...and each image is saved over 100 times. My PC went down and I've not been able to continue the work since.
Does anyone have a clue what I can do to fix this? I am totally baffled at this point. Any ideas would be great. Thanks.I'm on PC/Windows 7. I had enough issues getting CS2 installed on Windows 7, but it can be done. I just wanted some assurance that Dreamweaver installation doesn't remove GoLive. Thanks!
-
I NEED HELP WITH THE SIZE OF MY WINDOW ON IPHOTO 08'
Hi, I have had my mac for a while now and I was wondering if somene could help.
I know it is alot different then other computers when choosing the size of the appearence of windows on the screen. I have been using iphoto for a while and when I first started using it the application only took up half of the screen (when fully opened) which i was really happy about since it made it easy for my to drag and drop onto my desktop. The other day I clicked the green button in the top left corner to make it bigger, as I thought it would help with what I wanted to do.
My problem is.. now when I go to click the green button to shrink it down to half the size again it does not work. I am wondering if there is something wrong? or is it just always supposed to be this way? I am hoping not as i really liked having it in a smaller window. please help
thanks, katieWelcome to the Apple Discussions.
You can resize any window on a Mac simply by grabbing the lower right hand corner and dragging.
Regards
TD -
CS2 - Help with file size. "emptyfile.ai" is saving with a size of 1.2 MB
When we save a newly created file in illustrator CS 2 using Mac OS 10.4.11 the file is saved and the size is 1.2 MB. The file contains one letter (character "A"). Can any tell me what settings I need to change to save this file with an approriate size.
Thanks for any help
GlennRun the Delete Unused Panel Items action. I already did this on all my new document profiles, so there are never any extraneous panel items in my new files. A new file created from Basic CMYK, with an A type in Myriad Pro Regular is 66 kB when saved without colour profile or PDF compatibility.
But what is the problem? Surely the fact that a working, editable file is 1 MB is not a problem, so what it? -
Noob needs help with Media Encoder Settings
Hi All,
Please be gentle with me. I am very new to this.
I am using PPCS4 full version on which I am trying to edit and export video from my Canon HF 10 using their AVCHD format.
The Mac is a MAC PRO 2 x QuadCore 3.0Ghz, 1 x 320GB SATA and 3 x 1TB SATA disks with a 30" Apple Cinema Display.
I can import and see the video running in the source window, it can be a bit choppy but i am putting dowm to the lack of RAM (more the way). My real problem is that when I export the files the result is, well bad. I either get what appears to be a line effect every other line on the screen or by using other settings it appears grainy.
My Cam should be recording in 1080i HD and i expect to be able to put this stuff on a DVD / Blue-Ray disk or file and see as good an image as I see in the viewfinder. This I cannot seem to do.
Any ideas?
Thanks
JHi
I don't understand...please let me know...
did media encoder work before and it just suddenly stopped working ? Or is this the first time you tried using it and it just doesnt work from your original installation ? In other words , did it EVER work for you using the HD ?
What source material are you using ? In other words, what type of video. MOV and AVI can have many different types of video inside those file extensions...they are called "wrappers" insomuch as they can have a lot of different "codecs" being used in the video. Can you tell us what the video is that you're using when AME fails to work ?
Also tell more about your computer setup...how many hard drives? Did you set up your system like recommended in many threads here in the forums ?
There are a lot of really good and smart people here who can help you, but they need as much information as possible so they can begin to understand what is going on with your problem. It does take some time and work on your part to put all that info into a message, but it's worth it because most times problems are solved because of it.
ps...not meant to be a criticism because you were angry about problem, but some people probably didnt respond to your trouble right away because of your initial mssg being a little bit scary.. most people here are just users like you and help each other. nobody wants to risk being yelled at or deal with someone who is just angry and isn't really supplying enough information to help solve the problem. That's just my opinion, and I'm glad your response to my mssg was less angry sounding. Whew ! -
Noob needs help with hosting multiple sites
Hello I am new to this multi hosting. I have looked on the forum for answers but haven't found any. I am trying to figure out how to host multiple sites. I have my dns working for my default site "example1.com", but need to know if I need to add another dns record for my second site. "example2.com". Also when I point to the new fold that has the second site in it and I assign it port 82 for testing purposes I get an error message saying 403 access forbidden. I need to find out how get permission to view the site for the public. Its in a separate folder on an external hard drive right now for testing purposes. Can any body help me or point me in the right direction? Thanks so much!!!
-Kcam1999{quote}
While what you are telling him is technically functional, it is not correct
I beg to differ, Paul. You are the one that is not correct.
CNAMES have been deprecated as of some years ago
What? huh? really?
Please show me any official document that states this (and not someone who just started a rumor because he didn't understand them). Indeed, the DNS RFC makes no such claim.
{quote}
I stand very much corrected. CNAMEs are not officially deprecated. Interestingly, your post cites precisely what happens when CNAMES used carelessly. How many transactions are needed to resolve Apple's CNAME chain below? RFC1912 (http://www.faqs.org/rfcs/rfc1912.html) has some recommendations that suggests Apple's own network folks have, like me and perhaps even others here, some learning to do. Is that a 'best practice?'
{quote}> Then make sure you tell Apple since this site depends on the use of CNAMEs:
dig discussions.apple.com
discussions.apple.com. 492 IN CNAME discussions.apple.com.edgesuite.net.
discussions.apple.com.edgesuite.net. 4427 IN CNAME a1399.b.akamai.net.
a1399.b.akamai.net. 2 IN A 128.241.220.82
a1399.b.akamai.net. 2 IN A 128.241.220.72
In fact, it uses TWO CNAMES in a chain. Oh my.{quote}
From RFC1912 (which I'm sure many have now read here), section 2.4 is as follows:
{quote}... having chained records such as CNAMEs pointing to CNAMEs may
make administration issues easier, but is known to tickle bugs in
some resolvers that fail to check loops correctly. As a result some
hosts may not be able to resolve such names.{quote}
{quote}> It is not valid to say "don't use these because they could cause problems'. A records can be just as problematic, as can PTRs. Let's not even talk about MX.{quote}
How, exactly, does is an A record problematic? No chains, no additional lookups, no wasted cycles...
We differ here -- and if we are dealing with a newbie, we don't need to enter into unnecessary complexity UNTIL it is a requirement for their solutions.
{quote}> There are many valid reasons to use CNAMEs in DNS, not least of which is the ease of moving a service if it uses CNAMEs. For example, if you have 10 A records all pointing at the same server and you want to migrate to a different machine you have to locate and update all 10 records. If they used a CNAME to the physical server you could move them all at once using a single change. This is especially important in cross-domain links where you may not control all the origin zone files.
{quote}
You're somewhat reaching here, and it is well beyond the scope of the OP's post or needs (well, until they tell us more about their needs, I suppose). There is nothing difficult about 'finding' and updating the necessary records. The final example you gave is a good one and I'll say THAT is an appropriate use of a CNAME, 'though there are other workarounds for it.
Thanks for keeping me honest. -
PHP disaster with entropy installation need help with file location
I have a mac mini snow leopard server running 10.6.5 ,and I was trying to resolve a mcrypt module issue so that I could install wordpress and magento on some of our sites.After doing what I thought was extensive research, I decided to download the entropy php 5.30-3pkg from Marc Liyanage since it was already compiled and had an automatic install.I had the xcode tools installed and was going to attempt to compile it myself,but did not quite understand the instructions on Michael Gracie's site.When I installed the entropy package it told me that i needed to first disable the existing module,and I attempted to uncheck the php5 module,with no luck,as every time I tried to save it it rechecked itself,which I later discovered was happening because of dependency issues, as I had the mail,wiki,etc services on the sites checked. So my problem is that I wasn't aware at the time of the dependency issue,and I just renamed the module and the file name by putting a # in front of both (Inside the server admin dialog box through the pop up window).I didn't think it would hurt since is was going to be disabled,but now i get blank pages when trying to connect,and can't even see a test.php file, nor can I even locate where they say:
software is supposed to be installed into a new directory /usr/local/php5 on my boot volume. If you ever want to get rid of the package, you only have to remove this directory and a symbolic link called +entropy-php.conf in either /etc/apache2/sites or /etc/apache2/other, depending on whether you run OS X Client or Server.
Any help would be appreciated !Thank you so much, that works just like i wanted it to as it downloads the file but then i have the problem of the file being called firename.png (or whatever i put in there instead)
using this i changed the code and made it this instead which works 100%
set download to text returned of (display dialog "Enter IGN" default answer "" buttons {"Download", "Cancel"} default button 1)
set the destination to (choose folder)
do shell script "curl -L http://minecraft.net/skin/" & download & ".png" & " -o " & quoted form of ((POSIX path of the destination) & download & ".png")
so i used the input name again with download and added a .png for the extention and now it downloads the file to the locaiton i specify with the name of the user im entering with the correct exention, 100% awesome ^^
Thank you everyone who help me with that issue, grately appreshiated -
Need help with File system creation fro Oracle DB installation
Hello,
I am new to Solaris/Unix system landscape. I have a Sun enterprise 450 with 18GB hard drive. It has Solaris 9 on it and no other software at this time. I am planning on adding 2 more hard drives 18gb and 36gb to accommodate Oracle DB.
Recently I went through the Solaris Intermediate Sys admin training, knows the basic stuff but not fully confident to carry out the task on my own.
I would appreciate some one can help me with the sequence of steps that I need perform to
1. recognize the new hard drives in the system,
2. format,
3. partition. What is the normal strategy for partitioning? My current thinking is to have 36+18gb drives as data drives. This is where I am little bit lost. Can I make a entire 36GB drive as 1 slice for data, I am not quite sure how this is done in the real life, need your help.
4. creating the file system to store the database files.
Any help would be appreciated.Hello,
Here is the rough idea for HA from my experience.
The important thing is that the binaries required to run SAP
are to be accessible before and after switchover.
In terms of this file system doesn't matter.
But SAP may recommend certain filesystem on linux
please refer to SAP installation guide.
I always use reiserfs or ext3fs.
For soft link I recommend you to refer SAP installation guide.
In your configuration the files related to SCS and DB is the key.
Again those files are to be accessible both from hostA and from hostB.
Easiest way is to use share these files like NFS or other shared file system
so that both nodes can access to these files.
And let the clustering software do mount and unmount those directory.
DB binaries, data and log are to be placed in shared storage subsystem.
(ex. /oracle/*)
SAP binaries, profiles and so on to be placed in shared storage as well.
(ex. /sapmnt/*)
You may want to place the binaries into local disk to make sure the binaries
are always accessible on OS level, even in the connection to storage subsystem
losts.
In this case you have to sync the binaries on both nodes manually.
Easiest way is just put on shared storage and mount them!
Furthermore you can use sapcpe function to sync necessary binaries
from /sapmnt to /usr/sap/<SID>.
For your last question /sapmnt should be located in storage subsystem
and not let the storage down! -
Noob needs help with this code...
Hi,
I found this code in a nice tutorial and I wanna make slight
adjustments to the code.
Unfortunately my Action Script skills are very limited... ;)
This is the code for a 'sliding menue', depending on which
button u pressed it will 'slide' to the appropriate picture.
Here's the code:
var currentPosition:Number = large_pics.pic1._x;
var startFlag:Boolean = false;
menuSlide = function (input:MovieClip) {
if (startFlag == false) {
startFlag = true;
var finalDestination:Number = input._x;
var distanceMoved:Number = 0;
var distanceToMove:Number =
Math.abs(finalDestination-currentPosition);
var finalSpeed:Number = .2;
var currentSpeed:Number = 0;
var dir:Number = 1;
if (currentPosition<=finalDestination) {
dir = -1;
} else if (currentPosition>finalDestination) {
dir = 1;
this.onEnterFrame = function() {
currentSpeed =
Math.round((distanceToMove-distanceMoved+1)*finalSpeed);
distanceMoved += currentSpeed;
large_pics._x += dir*currentSpeed;
if (Math.abs(distanceMoved-distanceToMove)<=1) {
large_pics._x =
mask_pics._x-currentPosition+dir*distanceToMove;
currentPosition = input._x;
startFlag = false;
delete this.onEnterFrame;
b1.onRelease = function() {
menuSlide(large_pics.pic1);
b2.onRelease = function() {
menuSlide(large_pics.pic2);
b3.onRelease = function() {
menuSlide(large_pics.pic3);
b4.onRelease = function() {
menuSlide(large_pics.pic4);
I need to adjust five things in this code...
(1) I want this menue to slide vertically not horizontally.
I changed the 'x' values in the code to 'y' which I thought
would make it move vertically, but it doesn't work...
(2) Is it possible that, whatever the distance is, the
"sliding" time is always 2.2 sec ?
(3) I need to implement code that after the final position is
reached, the timeline jumps to a certain movieclip to a certain
label - depending on what button was pressed of course...
I tried to implement this code for button number two...
b2.onRelease = function() {
menuSlide(large_pics.pic2);
if (currentPosition = finalDestination) {
this.large_pics.pic2.gotoAndPlay("s1");
--> sliding still works but it doesn't jump to the
appropriate label...
(4) I wanna add 'Next' & 'Previous' buttons to the slide
show - what would be the code in this case scenario ?
My first thought was something like that Flash checks which
'pic' movieclip it is showing right now (pic1, pic2, pic3 etc.) and
depending on what button u pressed u go to the y value of movieclip
'picX + 1' (Next button) or 'picX - 1' (Previous button)...
Is that possible ?
(5) After implementing the Next & Previous buttons I need
to make sure that when it reached the last pic movieclip it will
not go further on the y value - because there is no more pic
movieclip.
Options are to either slide back to movieclip 'pic1' or
simply do nothing any more on the next button...
I know this is probably Kindergarten for you, but I have only
slight ideas how to do this and no code knowledge to back it up...
haha
Thanx a lot for your help in advance !
Always a pleasure to learn from u guys... ;)
MikeHi,
I made some progress with the code thanx to the help of
Simon, but there are still 2 things that need to be addressed...
(1) I want the sliding time always to be 2.2 sec...
here's my approach to it - just a theory but it might work:
we need a speed that changes dynamically depending on the
distance we have to travel...
I don't know if that applies for Action Scrip but I recall
from 6th grade, that...
speed = distance / time
--> we got the time (which is always 2.2 sec)
--> we got the disctance
(currentposition-finaldestination)
--> this should automatically change the speed to the
appropriate value
Unfortunately I have no clue how the action script would look
like (like I said my action script skills are very limited)...
(2) Also, one other thing I need that is not implemented yet,
is that when the final destination is reached it jumps to a certain
label inside a certain movieclip - every time different for each
button pressed - something like:
if (currentPosition = finalDestination) {
this.large_pics.pic2.gotoAndPlay("s1");
that statement just doesn't work when I put it right under
the function for each button...
Thanx again for taking the time !!!
Mike
Maybe you are looking for
-
Is it possible to re-install itunes and sign in your account without creating a new one?
I cant access my itunes account so I am thinking of un-installing it and re-insalling it. Would I be able to sign in my account using my apple ID instead of creating a new account? thanks in advace
-
Not able to edit Service Contract from WEBUI beacause of error
Hi, I am trying to edit Service Contract from WEB UI. But, when ever I say edit, it is giving error saying "Document is being distributed. Changes are not possible". Can you please let me know, why such error comes..and how to rectify that. Thanks, S
-
Help! My 4th Generation Ipod Nano won't sync all my songs. I backed-up my songs first, then formated and then restored back to my Ipod. Now it syncs and my ipod shows up in the sidebar, but I get an error message that over 100+ songs were not copied
-
Hi, I have this query snippet, this query takes around 15 seconds. table error_event has around 1.8 million records. when i removed the group by and just do a normal join, it took just 1 second to complete. but i cant remove the group by because no_e
-
Javascript:$v_PopupReturn problem
Hi there! I have a problem and dont really know why that happens: I have a form with some textfields, next to the field "P20_ID" is a button. The button has a optional URL redirect "javascript:popUp2('f?p=&APP_ID.:21:&SESSION.',600,600);". When i cli