PHP disaster with entropy installation need help with file location

I have a mac mini snow leopard server running 10.6.5 ,and I was trying to resolve a mcrypt module issue so that I could install wordpress and magento on some of our sites.After doing what I thought was extensive research, I decided to download the entropy php 5.30-3pkg from Marc Liyanage since it was already compiled and had an automatic install.I had the xcode tools installed and was going to attempt to compile it myself,but did not quite understand the instructions on Michael Gracie's site.When I installed the entropy package it told me that i needed to first disable the existing module,and I attempted to uncheck the php5 module,with no luck,as every time I tried to save it it rechecked itself,which I later discovered was happening because of dependency issues, as I had the mail,wiki,etc services on the sites checked. So my problem is that I wasn't aware at the time of the dependency issue,and I just renamed the module and the file name by putting a # in front of both (Inside the server admin dialog box through the pop up window).I didn't think it would hurt since is was going to be disabled,but now i get blank pages when trying to connect,and can't even see a test.php file, nor can I even locate where they say:
software is supposed to be installed into a new directory /usr/local/php5 on my boot volume. If you ever want to get rid of the package, you only have to remove this directory and a symbolic link called +entropy-php.conf in either /etc/apache2/sites or /etc/apache2/other, depending on whether you run OS X Client or Server.
Any help would be appreciated !

Thank you so much, that works just like i wanted it to as it downloads the file but then i have the problem of the file being called firename.png (or whatever i put in there instead)
using this i changed the code and made it this instead which works 100%
set download to text returned of (display dialog "Enter IGN" default answer "" buttons {"Download", "Cancel"} default button 1)
set the destination to (choose folder)
do shell script "curl -L http://minecraft.net/skin/" & download & ".png" & " -o " & quoted form of ((POSIX path of the destination) & download & ".png")
so i used the input name again with download and added a .png for the extention and now it downloads the file to the locaiton i specify with the name of the user im entering with the correct exention, 100% awesome ^^
Thank you everyone who help me with that issue, grately appreshiated

Similar Messages

Podcast with Just Approved, Need Help with Changing Category

Hi,
My podcast was just approved, however, it's a movie review podcast and for some reason it's categorized in the Technology section.
I need to know how to change this,
Thanks!
Elli

Open your podcast in Podcast Maker. If necessary click the 'Edit podcast' button at top right so that you get the split screen with the episodes at the bottom and the 'Podcast title', 'Author', 'Description' and other fields at the top.
The bottom field is 'Categories'. Click the 'Set...' button to its right: You will see the current category listed. Click the '+' button below the list and choose 'TV & Film' from the pop-up list. You will see it added to the list. Then click the present category to select it and click the '-' button to remove it. On your next publish the category should change in iTunes (it may take a few days).
As long as you have an up-to-date version of Podcast Maker the Categories list should match the available ones listed by Apple here
http://www.apple.com/itunes/podcasts/specs.html#categories (not as given above).

Two probs with my imac need help with

Hi all I bought my first mac for the wife but we have two probs with it we cant get on top of
One is every time we try to access her mac that is on the same network it asking for a password
But none of the pcs have a password on
And the second prob is the mac losers sound on email but we are not on an imap account
So I have read that it is something to do with the idle setting but we can not find the settings
Can anybody help and I must say the mac is the best PC I have every used that's if I can get the wife off it

al22,
You have 90 days of free AppleCare telephone support. If your machine is within the 90 days or you have already bought AppleCare (STRONGLY recommended) give them a call. The support is excellent, nothing like what you are used to with a PC.
Because you did not complete your profile we have no idea where you are located, what machine you have or the version of OS X installed. Please complete your profile, you can find it under Your Stuff in the upper right.
http://support.apple.com/kb/HE57

Almost finished with site, really need help with pop up window!!!!!

I've got one last thing to finish up on this site I've been working on. I've posted what I've worked up so far at:
http://truetilldeathhq.com/main8_v7/main8_v7.html
I still have to finish linking the actual banner swfs on the Online Banners page, which will display animated banner ads for the portfolio. Ideally, when the user clicked the View Banner link, I wanted to have the banners display in a similar pop up window like the other examples of the work (with same title area, close button, etc., click the Detailed View button on Merchandise page for example). That was problematic due to different frame rates of the banner swfs, getting the pop up window to contain just the stage area of the swf and not the working area, getting the window to pop up in the middle and not get cut off at the right side, etc. Like I said, ideally I'd like to do this, so if anyone has a relatively quick fix, I'm all ears.
I figured my best route now is to somehow have Flash trigger an html pop up window when the link is clicked and have it display in the middle of the page at the exact dimensions of the banner. Anybody know the best way to do this? I'm at my wits end and I really have to have this finished for Monday so any help is more than appreciated, thank big time in advance!

Forgive me for my ignorance, but I'm new to Flash and any kind of scripting and I didn't quite follow that page you directed me to. Right now I'm working up a Flash template and the action on the link for the banner pages looks like this:
on(rollOver) {
this.gotoAndPlay("s1");
on(rollOut, releaseOutside) {
this.gotoAndPlay("s2");
on (release) {
_root.popup_pressed=1;
_root.scrHEIGHT=240
_root.scroller.scroller.gotoAndStop(2);
_root.TM_title = "Work 1 read more";
_root.READ = 1;
_root.scroller.gotoAndPlay("s1");
How can I work up the on (release) so I'll get a simple pop up window, say 728x90, no scrollbars or resizing, that will open somewhere in the middle of the site? If I wanted a title to the pop up window, how would I do that?
Again, thanks so much for your time and excuse my newbieness.

I'm new, please bear with me, I need help with connecting Airport extreme

I have been using a Dell desktop pc, running Windows XP for the past few years. I have a dsl modem, (qwest m1000)hooked up for my internet acces. Just bought a new MacPro laptop and the airport extreme. Can I connect the new router to my dsl mdem and have both my desktop and my laptop connect to the internet? If so, how do I do this? thanks for your help!

Welcome to the Mac side twoo.
Airport Utility is the program you'll use to connect to and set up your Extreme. What you want to do is pretty straightforward. Airport Utility will take you by the hand in setting it up.
Power down the DSL modem before you connect it to your Extreme for the first time.

Need help with installation

I recently received a laptop from school to access my online classes. When I tried to use Adobe Reader I received the following message: Adobe Reader 9.1 has encountered a problem and needs to close. Sorry for the inconvenience. I tried tech support at school and was told to uninstall and reinstall the program. During the installation process I received the following error: Error 1321 The installer has insufficient privileges to modify the file C:/Program Files/Adobe/Reader 9.0/Reader/Onix32dll. I need this program for school. Can some one please help me.

Hello again, Michael,
Was unable to do the UAC changes. Buttons where not highlighted. I just went ahead and uninstalled Adobe and downloaded Foxitsoftware and it works. Thanks for all your help Michael you have made my online school experience better.
Sincerely,
Sherri Lee
Date: Mon, 13 Jul 2009 11:03:52 -0600
From: [email protected]
To: [email protected]
Subject: Need help with installation
Hello again, Sherri:
It's my pleasure to provide assistance when I can :•) Having just recently graduated after 7 years of effort just to get a 2-year degree, I can relate to needing software to get class work accomplished. I will do everything I can to make it happen for you today.
Since you didn't mention, the UAC setting, I'd like you to disable it for me if it isn't already:
1. Open Control Panel
2. Under User Account and Family settings, click on the "Add or remove user account"
3. Click on any user account
4. Under the user account click on the "Go to the main User Account page" link.
5. Under "Make changes to your user account", click on the "Change security settings" link
6. In the "Turn on User Account Control (UAC) to make your computer more secure" click to unselect the "Use User Account Control (UAC) to help protect your computer". Click on the Ok button.
7. You will be prompted to reboot your computer - do so when ready
You may need to uninstall/reinstall Reader after the reboot in order for the problem to go away, but that part I am not certain of. Try to duplicate the issue prior to taking that step.
If you are unable to resolve issues with Adobe Reader, I recommend using a different reader that has much less bloat and is updated regularly:
http://www.foxitsoftware.com/pdf/reader/
FoxIT is a FREE alternative to using Adobe's Reader. Support for free Adobe products is limited forums such as this. The same holds true for open source alternatives except the manufacturer usually helps support their forums while Adobe doesn't monitor this forum or any like it. I know how important it is for you to focus on your classes so don't beat your head against a wall just because Reader won't work when a viable solution exists.
Best of success in your pursuit of knowledge!
Michael
>

Need help with flash player installation please !!!!

Hello,
I need help with my flash player installation because every time I access a movie this is the message I receive.
This content on Xfinity TV is not available for viewing with Chrome's "Incognito" mode. To play this video using Chrome, please view this page without "Incognito" mode.
Still having problems? Try resetting your Flash player license.

Incognito mode is a Google Chrome setting when you open a new window (Cmd+Shift+N on a Mac Ctrl+Shift+N on Windows) It opens a "private" window with no cookies and no tracking. The problem with it is that when you disable cookies, your license files are not sent to the site (whetehr it's YouTube or xFinity or any other that uses license files for paid content) and it treats you as if you're a first time visitor. Paid videos won't play wihtout the cookies sending the license file info.
This isn't a Flash Player setting. It's in Chrome. I did some research and according to Google, "Incignito" mode is off by default, and can ONLY be activate by the keyboard shortcut. There IS a way to disable it from the registry http://dev.chromium.org/administrators/policy-list-3#IncognitoModeAvailability

I need help with my CS5 installation

My CS5 installed normally as usual, but once it was done it was telling me that there was an error in installing, told me to restart and proceed with the installation again.
I did it twice, and now it seems to work but it gave me the same error.
I opened the program and it's telling me that,"Photoshop has encountered a problem with the display driver, and has temporarily disabled the GPU enhancements. Check the video card manufacturer's website for the latest software."
I did an update search on my computer for that specific driver and apparently it's up to date. I also read on a forum that I needed to download Adobe Driver. But, unfortunately it's saying the same thing that CS5 said after the installation, to restart and continue with the installation.
Help?

if you're encountering multiple different error messages,
1. uninstall cs5,
2. run the cleaner,
3. update your video driver (go to your video card's manufacturer website),
4. restart your computer (http://www.adobe.com/support/contact/cscleanertool.html) and then
5. reinstall cs5.

Need help with PHP contact form

Hi guys,
I've made a PHP contact form for my site and need help with a couple of things:
The form action links an external PHP script (scripts/contact-form-script.php) but is there a way I can have it so the PHP script for the form is contained within the same PHP file as my contact form (contact.php)?
I tried just putting the form code at the top of contact.php but the browser automatically reads the anti-spam re-direct, so maybe that needs revising too?
The second thing is, how can I make the Name, Email and Message fields mandatory? So if a user tries to submit the form and hasn't filled in one of the required fields and clicks submit, contact.php reloads with a message at the top of the form saying something like 'Complete the required fields' and highlights the relevant field with a red border?
Here's the code for contact.php:
<form action="http://www.mydomain.com/scripts/contact-form-script.php" method="post" name="contact" id="contact">
<p><strong>Name:*</strong><br />
<input name="name" type="text" class="ctextField" /></p>
<p><strong>E-mail:*</strong><br />
<input name="email" type="text" class="ctextField" /></p>
<p><strong>Telephone:</strong><br />
<input name="telephone" type="text" class="ctextField" /></p>
<p><strong>Company:</strong><br />
<input name="company" type="text" class="ctextField" /></p>
<p><strong>Address:</strong><br />
<input name="address1" type="text" class="ctextField" /></p>
<p><input name="address2" type="text" class="ctextField" /></p>
<p><strong>Town:</strong><br />
<input name="town" type="text" class="ctextField" /></p>
<p><strong>County:</strong><br />
<input name="county" type="text" class="ctextField" /></p>
p><strong>Postcode:</strong><br />
<input name="postcode" type="text" class="ctextField" /></p>
<p><strong>Message:*</strong><br />
<textarea name="message" cols="55" rows="8" class="ctextField"></textarea></p>
<p><input name="submit" value="SEND MESSAGE" class="submitButton" type="submit" /><div style="visibility:hidden; width:1px; height:1px"><input name="url" type="text" size="45" id="url" /></div></p>
</form>
And this is the PHP I'm using to submit the form data for contact-form-script.php:
<?php
$headers .= "Reply-To: " . $_POST["email"] . "\r\n";
$to = "[email protected]";
$subject = "Contact from website";
$message = $headers;
$message .= "Name: " . $_POST["name"] . "\r\n";
$message .= "E-mail: " . $_POST["email"] . "\r\n";
        $message= '
            <table cellspacing="0" cellpadding="8" border="0" width="500">
            <tr>
                <td colspan="2"></td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td width="154" style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Name</strong></td>
              <td width="314" style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$name.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>E-mail address:</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$email.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Telephone number:</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$telephone.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Company:</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$company.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Address</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$address1.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$address2.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Town</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$town.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>County</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$county.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Postcode</strong></td>
              <td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$postcode.'</td>
            </tr>
            <tr bgcolor="#eeeeee">
                <td colspan="2" style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Message</strong></td>
            </tr>
            <tr bgcolor="#eeeeee">
                <td colspan="2" style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$message.'</td>
            </tr>
            <tr><td colspan="2" style="padding:0px;"><img src="images/whitespace.gif" alt="" width="100%" height="1" /></td></tr>
         </table>
$url = stripslashes($_POST["url"]);
if (!empty($url)) {
header( 'Location: http://www.go-away-spam-robots.com' );
exit();
mail($to, $subject, $message, $headers);
header( 'Location: http://www.mydomain.com/sent.php' ) ;
?>
Any help on this would be greatly appreciated.
Thank you and I hope to hear from you!
SM

Revised code with form validation for Name Email and Message:
<?php
if (array_key_exists('submit', $_POST)) {
    $name = $_POST['name'];
    $email = $_POST['email'];
    $telephone = $_POST['telephone'];
    $company = $_POST['company'];
    $address1 = $_POST['address1'];
    $address2 = $_POST['address2'];
    $town = $_POST['town'];
    $county = $_POST['county'];
    $postcode = $_POST['postcode'];
    $formMessage = $_POST['message'];
if (empty($name)) {
                                            $warning['name'] = "Please provide your name";
if (empty($email)) {
                                            $warning['email'] = "Please provide your email";
if (empty($formMessage)) {
                                            $warning['message'] = "Please provide your message";
$headers .= "Reply-To: " . $_POST["email"] . "\r\n";
$to = "[email protected]";
$subject = "Contact from website";
$message = $headers;
$message .= "Name: " . $_POST["name"] . "\r\n";
$message .= "E-mail: " . $_POST["email"] . "\r\n";
$headers = "MIME-Version: 1.0\r\n";
$headers .= "Content-type: text/html; charset=iso-8859-1\r\n";
        $message= "
<table cellspacing='0' cellpadding='8' border='0' width='500'>
            <tr>
                <td colspan='2'></td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td width='154' style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Name</strong></td>
              <td width='314' style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$name."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>E-mail address:</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$email."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Telephone number:</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$telephone."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Company:</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$company."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Address</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$address1."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$address2."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Town</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$town."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>County</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$county."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Postcode</strong></td>
              <td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$postcode."</td>
            </tr>
            <tr bgcolor='#eeeeee'>
                <td colspan='2' style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Message</strong></td>
            </tr>
            <tr bgcolor='#eeeeee'>
                <td colspan='2' style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$formMessage."</td>
            </tr>
            <tr><td colspan='2' style='padding: 0px;'><img src='images/whitespace.gif' alt='' width='100%' height='1' /></td></tr>
         </table>
$url = stripslashes($_POST["url"]);
if (!empty($url)) {
header( 'Location: http://www.go-away-spam-robots.com' );
exit();
if (!isset($warning)) {
mail($to, $subject, $message, $headers);
header( 'Location: http://www.mydomain.com/sent.php' ) ;
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<style type="text/css">
p {
    margin: 0;
    padding: 10px 0 0 0;
.warning {
    color:#C00;
</style>
</head>
<body>
<form action="" method="post" name="contact" id="contact">
<p><strong>Name:*</strong><br />
<input name="name" <?php if (isset($warning['name'])) { echo "style='border: 1px solid #C00'"; } ?> type="text" class="ctextField" />
<?php if (isset($warning['name'])) { echo "<p class='warning'>".$warning['name']."</p>"; }?>
</p>
<p><strong>E-mail:*</strong><br />
<input name="email" <?php if (isset($warning['email'])) { echo "style='border: 1px solid #C00'"; } ?>type="text" class="ctextField" />
<?php if (isset($warning['name'])) { echo "<p class='warning'>".$warning['email']."</p>"; }?>
</p>
<p><strong>Telephone:</strong><br />
<input name="telephone" type="text" class="ctextField" /></p>
<p><strong>Company:</strong><br />
<input name="company" type="text" class="ctextField" /></p>
<p><strong>Address:</strong><br />
<input name="address1" type="text" class="ctextField" /></p>
<p><input name="address2" type="text" class="ctextField" /></p>
<p><strong>Town:</strong><br />
<input name="town" type="text" class="ctextField" /></p>
<p><strong>County:</strong><br />
<input name="county" type="text" class="ctextField" /></p>
<p><strong>Postcode:</strong><br />
<input name="postcode" type="text" class="ctextField" /></p>
<p><strong>Message:*</strong><br />
<?php if (isset($warning['message'])) { echo "<p class='warning'>".$warning['message']."</p>"; }?>
<textarea name="message" <?php if (isset($warning['message'])) { echo "style='border: 1px solid #C00'"; } ?> cols="55" rows="8" class="ctextField"></textarea></p>
<p><input name="submit" value="SEND MESSAGE" class="submitButton" type="submit" /><div style="visibility:hidden; width:1px; height:1px"><input name="url" type="text" size="45" id="url" /></div></p>
</form>
</body>
</html>

Need help with Template - unbalanced #EndEditable tag

I am unable to use this template to create a new page and get the "unbalanced #EndEditable tag" error.
If I open the file independently it looks great - otherwise I get the error.
Code for internal_students.dwt
There is an error at line 45, column 79 (absolute position 2188)
<div id="metanav">
<p><a href="../Library/contact/index.html">Contact Us</a></p>
</div>
        <div id="navigation">
            <div id="navigation_l">
                <div id="navigation_r"> <ul>
                        <li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
                        <li><a href="../about/index.html">About</a></li>
<li><a href="../news/index.html">News And Events</a></li>
<li><a href="../educators/index.html">For Educators</a></li>
<li><a href="../students/index.html">For Students</a></li>
<li><a href="../industry/index.html" class="last">For Industry</a></li>
                    </ul>
</div>
I need help with this as the site and templates were created 2/3 years before I arrived on the job.
Thank you
Cheryl

Okay
- This is on-line page http://caite.cs.umass.edu/students/index.html
If you want code from template here it is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />

<title>CAITE - Commonwealth Alliance for Information Technology Education</title>


<meta name="Description" content="Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy" />
<meta name="Keywords" content="Commonwealth Alliance for Information Technology Education CAITE Massachusetts women minorities information technology IT" />
<meta name="robots" content="all, index, follow" />
<meta name="revisit-after" content="14 days" />
<meta name="author" content="Outreach Web Team" />

<link rel="shortcut icon" href="/images/favicon.ico" />
<script type="text/javascript" src="../scripts/jquery.js"></script>
<script type="text/javascript" src="../scripts/jquery.easing.js"></script>
<script type="text/javascript" src="../scripts/jquery.pngfix.js"></script>
<script language="JavaScript" type="text/JavaScript">
    
</script>
<link href="../css/screenstyle.css" rel="stylesheet" type="text/css" media="screen" />
<link href="../css/printstyle.css" rel="stylesheet" type="text/css" media="print" />
</head>
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<body>
    <div id="wrapper">
        <div id="metanav">
<p><a href="../Library/contact/index.html">Contact Us</a></p>
</div>
        <div id="navigation">
            <div id="navigation_l">
                <div id="navigation_r"> <ul>
                        <li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
                        <li><a href="../about/index.html">About</a></li>
<li><a href="../news/index.html">News And Events</a></li>
<li><a href="../educators/index.html">For Educators</a></li>
<li><a href="../students/index.html">For Students</a></li>
<li><a href="../industry/index.html" class="last">For Industry</a></li>
                    </ul>
</div>
                
            </div>
       </div>
        <div id="wrapper_l">
            <div id="wrapper_r">
                  <div id="innerwrapper">
                    <div id="internalBanner-print"> <h1>Commonwealth Alliance for Information Technology Education (CAITE)</h1></div>
                    <div id="internalBanner">
                      <div class="students-banner">
                        <table width="100%" border="0" cellspacing="0" cellpadding="0">
                          <tr>
                            <td width="125" height="188" align="left" valign="top" id="homeImage"><img src="../images/logo_vertical_small.png" alt="CAITE" width="105" height="188" /></td>
                            <td align="left" valign="top" id="internal-banner-quote"><div id="internalQuote">
                                <div id="internalQuote-inner">
                                  <p>CAITE designs and carrys out comprehensive programs that address under-representation in information technology (IT).</p>
                              </div>
                            </div></td>
                          </tr>
                        </table>
                    </div>
                    </div> 
                    <div id="internalContent">
                        <table width="100%" border="0" cellspacing="0" cellpadding="0">
                          <tr>
                            <td width="317" align="left" valign="top" id="secondary-content">
                              
                              <h3><a href="../students/index.html">For Students</a></h3>
                              <div id="secondaryNav">
                                <ul>
                                  <li><a href="http://www.takeITgoanywhere.org" target="_blank">TakeITgoanywhere.org</a></li>
                                </ul>
</div>
                            </td>
                            <td align="left" valign="top" id="contentCell">
                              <h1>For Students</h1>
                              <p>The University of Massachusetts Amherst is leading a Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy; that is, economically, academically, and socially disadvantaged residents.</p>
                              <p>The project will pilot a series of outreach programs supported by educational pathways in three regions (one rural, one suburban, and one urban). The project will include work with high school teachers, staff, and counselors. CAITE will identify best practices and disseminate, deploy, extend and institutionalize these best practices statewide and nationally.</p>
                              <p>Community colleges are the centerpiece of CAITE because of the central role they play in reaching out to underserved populations and in serving as a gateway to careers and further higher education.</p>
                              <p>This project will build a broad alliance built on its leadership in and partnership with the Commonwealth Information Technology Initiative (CITI), the Boston Area Advanced Technological Education Center (BATEC), regional Louis Stokes Alliances and NSF EGEP programs, and other partnerships and initiatives focused on information technology education and STEM pipeline issues</p>
                              <p> </p>
                            </td>
                          </tr>
                      </table>
                    </div>
                    <div id="alliances">
                          <table width="100%" border="0" cellpadding="0" cellspacing="0">
                            <tr>
                              <td height="30" align="left" valign="top"><h2><a href="../about/alliances.html">Alliances</a></h2></td>
                            </tr>
                            <tr>
                              <td align="center" valign="middle"><p>
<table border="0" cellpadding="2" cellspacing="0">
                                <tr>
                                  <td width="35" align="center" valign="middle"> </td>
                                  <td align="center" valign="middle"><a href="http://www.citi.mass.edu/" target="_blank"><img src="../images/logo_citi.jpg" alt="Citi" width="65" height="50" border="0 /"></a></td>
                                  <td align="center" valign="middle"><a href="http://www.batec.org/index.php" target="_blank"><img src="../images/logo_batec.jpg" alt="BATEC" width="69" height="46" border="0" /></a></td>
                                  <td align="center" valign="middle"><a href="http://www.nsf.gov/index.jsp" target="_blank"><img src="../images/nsflogo.gif" alt="NSF" width="64" height="65" border="0" ></a></td>
                                  <td align="center" valign="middle"><a href="http://www.nelsamp.neu.edu/" target="_blank"><img src="../images/nelsamplogo.gif" width="100" border="0"></a></td>
                                  <td align="center" valign="middle"><p><a href="http://mysite.verizon.net/milnerm/" target="_blank"><img src="../images/umlsamp.png" width="85" height="63" border="0"></a></p>                                  </td>
                                  <td align="center" valign="middle"><a href="http://www.neagep.org/index.asp" target="_blank"><img src="../images/nealogo.gif" border="0" ></a></td>
</tr>
                              </table>
</td>
                            </tr>
                      </table>
                    </div>
                </div> 
            </div>
        </div>
        <div id="bottom">
            <div id="bottom_l">
                <div id="bottom_r"> </div>
            </div>
        </div> 
    </div>
    <div id="copyright">
<p>Sponsored by CAITE an NSF CISE Broadening Participation in Computing Alliance<br />
© copyright 2008 <a href="http://www.umass.edu/" target="_blank">University of Massachusetts, Amherst</a></p>
<font color="#666666"><br>
</font>
<p><font color="#666666" size=2> This material is based upon work supported by the National Science Foundation under Grant No.s NSF-0634412 and NSF-0837739. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.</font> </p>
</div>

<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<script type="text/javascript">
try {
var pageTracker = _gat._getTracker("UA-7435501-1");
pageTracker._trackPageview();
} catch(err) {}</script>
    </body>
</html>

I need Help with a website I've created

I need help with a website I've created (www.jonathanhazelwood.com/lighthouse) I created the folowing site with dreamweaver at my current resolution 1366 by 768. Looks great on my screen resolution but if it is viewed on other resolutions the menu moves and some of the text above and below. How can I keep all content centered and working like it does on 1366 by 768 on all resolutions. The htm to my site is below I started off with a blank template through dreamweaver CS5.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>The Lighthouse Church</title>
<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
#apDiv12 {
    position:absolute;
    width:295px;
    height:23px;
    z-index:4;
    left: 198px;
    top: 1px;
#apDiv13 {
    position:absolute;
    width:135px;
    height:22px;
    z-index:5;
    left: 1001px;
    top: 3px;
#apDiv14 {
    position:absolute;
    width:309px;
    height:992px;
    z-index:1;
    left: 33px;
    top: 479px;
#apDiv15 {
    position:absolute;
    width:327px;
    height:999px;
    z-index:1;
    left: 324px;
#apDiv16 {
    position:absolute;
    width:262px;
    height:1000px;
    z-index:2;
    left: 674px;
    top: 477px;
#apDiv17 {
    position:absolute;
    width:85px;
    height:34px;
    z-index:1;
    left: -379px;
    top: 1001px;
#apDiv18 {
    position:absolute;
    width:200px;
    height:115px;
    z-index:6;
#apDiv19 {
    position:absolute;
    width:168px;
    height:31px;
    z-index:3;
    left: 448px;
    top: 1451px;
#apDiv20 {
    position:absolute;
    width:94px;
    height:33px;
    z-index:3;
    left: 384px;
    top: 1477px;
body {
    background-color: #000;
    margin-left: 0px;
    margin-right: 0px;
#apDiv21 {
    position:absolute;
    width:920px;
    height:200px;
    z-index:4;
    left: 19px;
    top: 233px;
</style>
</head>
<body>
<div class="container">
<div class="content">
    <div id="apDiv5">
      <div id="apDiv16">
        <div id="apDiv17">
          <map name="Map2" id="Map2">
            <area shape="rect" coords="4,2,77,28" href="http://www.myspace.com/lighthousechurch1" />
          </map>
          <img src="paypal-donate-button.png" width="83" height="33" border="0" usemap="#Map" />
          <map name="Map" id="Map">
            <area shape="rect" coords="2,2,80,30" href="https://www.paypal.com/us/cgi-bin/webscr?cmd=_flow&SESSION=HgApKd0bxyPQv1ixwBW3HgWXaLxPIiT Po9gSsRELLQp72IZ2-_8uvSmCLRO&dispatch=5885d80a13c0db1f8e263663d3faee8d9384d85353843a619606 282818e091d0" />
          </map>
        </div>
      </div>
      <div id="apDiv21">
        <blockquote>
          <blockquote>
            <blockquote>
              <blockquote>
                <blockquote>
                  <blockquote>
                    <p><img src="faithexplosion.png" width="314" height="225" /></p>
                  </blockquote>
                </blockquote>
              </blockquote>
            </blockquote>
          </blockquote>
        </blockquote>
      </div>
      <div id="apDiv14">
        <div id="apDiv15">
          <div>
            <div>
              <p> Special Message from Perry Stone </p>
              <h2> Was Jesus Born on December 25?</h2>
              <p> 12/20/2010 </p>
              <p><img alt="iStock_000003631829XSmall" src="http://www.voe.org/images/iStock_000003631829XSmall.jpg" width="300" height="234" /></p>
              <p>Last   year, in response to the growing number of Christians who celebrate   Hanukkah but hate Christmas, I wrote an article for this website titled   “Hanukkah or Christmas?” I explained why I think Jesus was either   conceived or birthed on December 25.</p>
            </div>
          </div>
          <div>
            <div><a href="http://www.voe.org/Prophecy-Update/what-happened-to-global-warming.html"> READ MORE</a>
              <p> Prophecy Update </p>
              <h2> What Happened to Global Warming?</h2>
              <p> 12/17/2010 </p>
              <p> </p>
            </div>
          </div>
          <div>
            <div></div>
          </div>
          <div>
            <div></div>
          </div>
        </div>
        <div>
          <p><font size="2">Special Word</font></p>
          <p><font size="2">January 7th, 2011</font></p>
          <p> <font size="2">Dear Viewers:</font></p>
          <p><font size="2">We have now entered into one of the most trying times; but also one of the most glorious            times in church history. Many things are coming upon the world and also upon the church and we (the church) must be totally            prepared to take up our cross daily and venture out into the lost and</font></p>
          <p> <a href="http://sermon.lighthousechurchinc.org/2011/01/07/special-word-1711-evangelist-barbara-lync h.aspx" target="_parent">Click Here for More</a></p>
        </div>
        <p> </p>
        <div></div>
        <div>
        </div>
        <div></div>
        <p> </p>
      </div>
      <img src="lighthousegraphic2.jpg" width="960" height="1509" />
      <div id="apDiv20"><img src="myspacebutton.jpg" width="89" height="30" border="0" usemap="#Map3" />
        <map name="Map3" id="Map3">
        <area shape="rect" coords="3,2,87,28" href="http://www.myspace.com/lighthousechurch1" />
      </map>
</div>
    </div>
<p> </p>
</div>
</div>
<div id="apDiv10"><font size="1"><font color="#FFFFFF">Copyright 2011 The Lighthouse Church Inc.</font></font></div>
<div id="apDiv11">
<ul id="MenuBar1" class="MenuBarHorizontal">
    <li><a href="#">Home</a>    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Our Pastor</a>
      <ul>
        <li><a href="#">Fresh Word</a></li>
        <li><a href="#">Itinerary</a></li>
        <li><a href="#">Prophetic Word</a></li>
        <li><a href="#">Sermons</a></li>
        <li><a href="#">Special Words</a></li>
        <li><a href="#">Word of Month</a></li>
      </ul>
    </li>
    <li><a href="#">Men Ministry</a></li>
    <li><a href="#" class="MenuBarItemSubmenu">Ministers</a>
      <ul>
        <li><a href="#">Chris Gore</a></li>
</ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Our Church</a>
      <ul>
        <li><a href="#">Contact Us</a></li>
        <li><a href="#">Donate</a></li>
        <li><a href="#">Events</a></li>
        <li><a href="#">Our Store</a></li>
        <li><a href="#">Prayer Request</a></li>
        <li><a href="#">Salvation</a></li>
        <li><a href="#">Subscribe</a></li>
        <li><a href="#">Vision</a></li>
        <li><a href="#">We Believe</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Resources</a>
      <ul>
        <li><a href="#">Prepare for Disaster</a></li>
        <li><a href="#">How to Fast</a></li>
        <li><a href="#">Heaven & Hell</a></li>
        <li><a href="#">Warfare Prayers</a></li>
        <li><a href="#">Wisdom Words</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Prophetic</a>
      <ul>
        <li><a href="#">Article Archive</a></li>
        <li><a href="#">Audio Prophecies</a></li>
        <li><a href="#">Color for Year</a></li>
        <li><a href="#">Major Articles</a></li>
        <li><a href="#">Prophecy Archive</a></li>
        <li><a href="#">Prophetic Articles</a></li>
        <li><a href="#">Word for Year</a></li>
      </ul>
    </li>
</ul>
</div>
<div id="apDiv12"><font size="1"><font color="#FFFFFF">6 South Railroad Ave Wyoming,DE 19934</font></font></div>
<div id="apDiv13"><font size="1"><font color="#FFFFFF">Phone:(302) 697-1472</font></font></div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>

Look at all the apdiv's you have. Those are absolutely positioned layers. I'm assuming by your post that you are very new to Dreamweaver and HTML and CSS. I would highly recommend not using absolutely positioned layers until you have a better grasp on HTML and CSS.
Looking at your code I would suggest that you consider using one of Dreamweaver's built in, or downloadable templates as a starting point and work from there.
http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html

Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

Need help with Berkeley XML DB Performance

We need help with maximizing performance of our use of Berkeley XML DB. I am filling most of the 29 part question as listed by Oracle's BDB team.
Berkeley DB XML Performance Questionnaire
1. Describe the Performance area that you are measuring? What is the
current performance? What are your performance goals you hope to
achieve?
We are measuring the performance while loading a document during
web application startup. It is currently taking 10-12 seconds when
only one user is on the system. We are trying to do some testing to
get the load time when several users are on the system.
We would like the load time to be 5 seconds or less.
2. What Berkeley DB XML Version? Any optional configuration flags
specified? Are you running with any special patches? Please specify?
dbxml 2.4.13. No special patches.
3. What Berkeley DB Version? Any optional configuration flags
specified? Are you running with any special patches? Please Specify.
bdb 4.6.21. No special patches.
4. Processor name, speed and chipset?
Intel Xeon CPU 5150 2.66GHz
5. Operating System and Version?
Red Hat Enterprise Linux Relase 4 Update 6
6. Disk Drive Type and speed?
Don't have that information
7. File System Type? (such as EXT2, NTFS, Reiser)
EXT3
8. Physical Memory Available?
4GB
9. Are you using Replication (HA) with Berkeley DB XML? If so, please
describe the network you are using, and the number of Replica’s.
No
10. Are you using a Remote Filesystem (NFS) ? If so, for which
Berkeley DB XML/DB files?
No
11. What type of mutexes do you have configured? Did you specify
–with-mutex=? Specify what you find inn your config.log, search
for db_cv_mutex?
None. Did not specify -with-mutex during bdb compilation
12. Which API are you using (C++, Java, Perl, PHP, Python, other) ?
Which compiler and version?
Java 1.5
13. If you are using an Application Server or Web Server, please
provide the name and version?
Oracle Appication Server 10.1.3.4.0
14. Please provide your exact Environment Configuration Flags (include
anything specified in you DB_CONFIG file)
Default.
15. Please provide your Container Configuration Flags?
final EnvironmentConfig envConf = new EnvironmentConfig();
envConf.setAllowCreate(true); // If the environment does not
// exist, create it.
envConf.setInitializeCache(true); // Turn on the shared memory
// region.
envConf.setInitializeLocking(true); // Turn on the locking subsystem.
envConf.setInitializeLogging(true); // Turn on the logging subsystem.
envConf.setTransactional(true); // Turn on the transactional
// subsystem.
envConf.setLockDetectMode(LockDetectMode.MINWRITE);
envConf.setThreaded(true);
envConf.setErrorStream(System.err);
envConf.setCacheSize(1024*1024*64);
envConf.setMaxLockers(2000);
envConf.setMaxLocks(2000);
envConf.setMaxLockObjects(2000);
envConf.setTxnMaxActive(200);
envConf.setTxnWriteNoSync(true);
envConf.setMaxMutexes(40000);
16. How many XML Containers do you have? For each one please specify:
One.
1. The Container Configuration Flags
          XmlContainerConfig xmlContainerConfig = new XmlContainerConfig();
          xmlContainerConfig.setTransactional(true);
xmlContainerConfig.setIndexNodes(true);
xmlContainerConfig.setReadUncommitted(true);
2. How many documents?
Everytime the user logs in, the current xml document is loaded from
a oracle database table and put it in the Berkeley XML DB.
The documents get deleted from XML DB when the Oracle application
server container is stopped.
The number of documents should start with zero initially and it
will grow with every login.
3. What type (node or wholedoc)?
Node
4. Please indicate the minimum, maximum and average size of
documents?
The minimum is about 2MB and the maximum could 20MB. The average
mostly about 5MB.
5. Are you using document data? If so please describe how?
We are using document data only to save changes made
to the application data in a web application. The final save goes
to the relational database. Berkeley XML DB is just used to store
temporary data since going to the relational database for each change
will cause severe performance issues.
17. Please describe the shape of one of your typical documents? Please
do this by sending us a skeleton XML document.
Due to the sensitive nature of the data, I can provide XML schema instead.
18. What is the rate of document insertion/update required or
expected? Are you doing partial node updates (via XmlModify) or
replacing the document?
The document is inserted during user login. Any change made to the application
data grid or other data components gets saved in Berkeley DB. We also have
an automatic save every two minutes. The final save from the application
gets saved in a relational database.
19. What is the query rate required/expected?
Users will not be entering data rapidly. There will be lot of think time
before the users enter/modify data in the web application. This is a pilot
project but when we go live with this application, we will expect 25 users
at the same time.
20. XQuery -- supply some sample queries
1. Please provide the Query Plan
2. Are you using DBXML_INDEX_NODES?
Yes.
3. Display the indices you have defined for the specific query.
     XmlIndexSpecification spec = container.getIndexSpecification();
     // ids
     spec.addIndex("", "id", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     spec.addIndex("", "idref", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // index to cover AttributeValue/Description
     spec.addIndex("", "Description", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_SUBSTRING, XmlValue.STRING);
     // cover AttributeValue/@value
     spec.addIndex("", "value", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // item attribute values
     spec.addIndex("", "type", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // default index
     spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // save the spec to the container
     XmlUpdateContext uc = xmlManager.createUpdateContext();
     container.setIndexSpecification(spec, uc);
4. If this is a large query, please consider sending a smaller
query (and query plan) that demonstrates the problem.
21. Are you running with Transactions? If so please provide any
transactions flags you specify with any API calls.
Yes. READ_UNCOMMITED in some and READ_COMMITTED in other transactions.
22. If your application is transactional, are your log files stored on
the same disk as your containers/databases?
Yes.
23. Do you use AUTO_COMMIT?
     No.
24. Please list any non-transactional operations performed?
No.
25. How many threads of control are running? How many threads in read
only mode? How many threads are updating?
We use Berkeley XML DB within the context of a struts web application.
Each user logged into the web application will be running a bdb transactoin
within the context of a struts action thread.
26. Please include a paragraph describing the performance measurements
you have made. Please specifically list any Berkeley DB operations
where the performance is currently insufficient.
We are clocking 10-12 seconds of loading a document from dbd when
five users are on the system.
getContainer().getDocument(documentName);
27. What performance level do you hope to achieve?
We would like to get less than 5 seconds when 25 users are on the system.
28. Please send us the output of the following db_stat utility commands
after your application has been running under "normal" load for some
period of time:
% db_stat -h database environment -c
% db_stat -h database environment -l
% db_stat -h database environment -m
% db_stat -h database environment -r
% db_stat -h database environment -t
(These commands require the db_stat utility access a shared database
environment. If your application has a private environment, please
remove the DB_PRIVATE flag used when the environment is created, so
you can obtain these measurements. If removing the DB_PRIVATE flag
is not possible, let us know and we can discuss alternatives with
you.)
If your application has periods of "good" and "bad" performance,
please run the above list of commands several times, during both
good and bad periods, and additionally specify the -Z flags (so
the output of each command isn't cumulative).
When possible, please run basic system performance reporting tools
during the time you are measuring the application's performance.
For example, on UNIX systems, the vmstat and iostat utilities are
good choices.
Will give this information soon.
29. Are there any other significant applications running on this
system? Are you using Berkeley DB outside of Berkeley DB XML?
Please describe the application?
No to the first two questions.
The web application is an online review of test questions. The users
login and then review the items one by one. The relational database
holds the data in xml. During application load, the application
retrieves the xml and then saves it to bdb. While the user
is making changes to the data in the application, it writes those
changes to bdb. Finally when the user hits the SAVE button, the data
gets saved to the relational database. We also have an automatic save
every two minues, which saves bdb xml data and saves it to relational
database.
Thanks,
Madhav
[email protected]

Could it be that you simply do not have set up indexes to support your query? If so, you could do some basic testing using the dbxml shell:
milu@colinux:~/xpg > dbxml -h ~/dbenv
Joined existing environment
dbxml> setverbose 7 2
dbxml> open tv.dbxml
dbxml> listIndexes
dbxml> query     { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }
dbxml> queryplan { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }Verbosity will make the engine display some (rather cryptic) information on index usage. I can't remember where the output is explained; my feeling is that "V(...)" means the index is being used (which is good), but that observation may not be accurate. Note that some details in the setVerbose command could differ, as I'm using 2.4.16 while you're using 2.4.13.
Also, take a look at the query plan. You can post it here and some people will be able to diagnose it.
Michael Ludwig

Need help with my Pioneer dvd-rw dvr-115d. HLEP!!

Hello i need help with my G4, i havent been useing it for a while and i started using it again. As i was trying to burn a DVD it didnt read my cd at all even if i put a DVD in there it dont read it just come right back out.. on my mac it shows that is there but not reading . what can i do????!!! i need help with this..
PIONEER DVD-RW DVR-115D:
Firmware Revision:          1.18
Interconnect:          ATAPI
Burn Support:          Yes (Vendor Supported Drive)
Profile Path:          /Library/DiscRecording/DeviceProfiles/PatchBurn-pioneerdvdrwdvr115d.drprof ile
Cache:          2000 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          Insert media and refresh to show available burn speeds
this is what it say in the system profiler.
Power PC Mac os x 10.5.8

The new user account didn't work?
Or, the firmware flash didn't work?
I would try reconnecting the data ribbon. It is cramped and difficult to get to, but it may be some corrosion or a poor connection causing the issue.
It's worth a try, as the DVR-115 is a good drive. They don't make them any more........
You can find an optical drive installation video (on the following page) to help you with your efforts:
http://eshop.macsales.com/installvideos/

HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5

Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questions

All the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer.

PHP disaster with entropy installation need help with file location

Similar Messages

Maybe you are looking for