NOT able to assign business system in ID

Dear all ,
i am not able to see my business system in the list when am trying to assign
business system.
i also tried refreshing the SLD cache but not working.
if u can help.
Regards,
Tarang Shah

Hi Tarang,
Just check if you have the right permissions to do that.
It can also happend that the businees system is not added in the SLD or SLD has to be refreshed.
regards,
younus

Similar Messages

Not able to import business system in Integration Directory

Dear all,
Currently i involved in XI system copy. As per the standard documetn i have finsihed the initial activites like EXPORT and import of abap and java files is succedded.
Now in the post instalaltion activites.
I have changed the exchange profile parameter
SLD connection.
And other post installation activites succesfully.
But I am not able to import the business system in Integration director. It throws an error by mentioning.
*Access to object list of type business system using the internalEOA service business system accessor failed *
Here we are maintaing a central SLD and hence i created the service users with specific roles.
SLDcheck is working fine and it dispalying the businees system as well.
I confirmed that the user and password are same in XI and SLD system,
But in SLD I am not able to see the domain under web as Exchagne Infrastructure alonng with the componets. I have tried to registerd the same using the note 761476 but in vain. After the changes i restarted the machin and checked the domain status in SLD technical system under exchagne Inffrastructure its not working.
Is this the problem or am i missing out somewhere?
FYI: The users are not locked.
Kindly suggest me and it will be greatful if i get immediate reply.
Thanks and regards
Vijay kumar G

Hi Vijay,
It looks like the problem is with the SLD.
Did you delete the SAP ABAP and Java technical system and business systems and recreate them in the central SLD? If this was the case, then you may not be able to import them into your integration directory anymore, as the GUID of the new technical systems and business systems are not the same with the previous one.
Why not tried to recopy the SLD again, and this time do not change the technical and business systems. If the reregistration of these systems are not avoidable, then you will have to open up the copied IR for configuration.
Regards,
Lim...

Not able to find business system

Guys ,
I am not able to find my business system in service without party -> business system in integration directory .

Hi,
did you have a look at this:
Defining a Business System as a Service
http://help.sap.com/saphelp_nw04/helpdata/en/3e/60653f0c9fa075e10000000a114084/content.htm
BTW
but first you must create it in the SLD:
Configuring a Business System
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/content.htm
and if you want to know how to insert a technical system you can take a look at my weblog:
Registering a new technical system in SLD - ABAP based
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
Regards,
michal
Message was edited by: Michal Krawczyk

PISUPER not able to create business systems

Dear All,
I am trying to create business systems in ID using PISUPER by importing from SLD. However, I keep getting a warning message saying 'Insufficient authorisation to create communication component'.
I check for all the required roles for PISUPER and they exist.
When I checked the J2EE logs, i can see the below error:
Context does not exist session id=com.sap.engine.session.exec.UserContextImpl@254ea7b6[ clientId=null, clientSessions=[], persistent Model=null]
Location: com.sap.conn.jco
Please could someone help me to resolve this.
Thanks
Vasu

check if you have USERS: PIDIRUSER & PIREPUSER
with Roles:
SAP_XI_ID_SERV_USER
SAP_XI_MONITOR_J2EE
And User Type must be service.
Also check Users are not locked.
also check if everything is fine with user SAPJSF...
(TCP/IP) LCRSAPRFC should point to correct Integration Server. Also the Program ID should be registered in the JCO connections of Integartion server with user SAPJSF.

Problem in assign business systems in IB configuration

Hi ,
I have defined Technical systems,business systems properly in SLD and i also able to import my software components in Integragion Repository. i have defined all the data type , msgs types ,msg interface,msg mappings properly in IR.
But my problem is when iam trying to assign business systems in IB configuration scenario.
Business system list is not appearing in IB configuration.
Thanks
Hari

Hi,
Check the following..
1) Check Whether that BS is already is Assigned to Another Scenario
2) If it is Assigned to another scenario means, goto Objects TAB -
Expand Service With out Party
Business sysemRight click---Add to scenario( Select ur scenario)
3) Do SLD Cache through Envoronment----SLD Cache
once you do this..
1) Expand Your Config Scenario--Service Without Party-Business SystemRight clickAssign
2) Say Continue-Say Continue Select ur BS
3) Un check the Check Box Bottom of the Window
go throgh these blogs too..
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Thanks,
Vijaya.

Unable to assign Business System in Configuration

Hi,
I have created a new Technical system in SLD. I have also configured a Business system for it. But when i am trying to assign this system in Configuration, "Assign Business system", i am not able to see the newly created business system.
Please help me.
Regards,
Siva Maranani.

We have already assinged the Integration server to their respective business system groups while creating the Business system groups.
BSG: XI_DEV --> UKD_400( Integration Server DEV )
BSG : XI_QA ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
Please help me understand if i am something in the configurations.
Thanks
Govind

Not able to assign the chart of depreciation

Hi i am not able to assign the chart of depreciation, can any one provide me the detail path for the below issue.
Inconsistency between FI company code BHEL and chart of deprec. BHEL
Message no. AC481
Diagnosis
You tried to assign chart of depreciation BHEL to company code BHEL. According to its Customizing definition, this company code manages parallel currencies.
The chart of depreciation does not contain a corresponding depreciation area for each of the currency types that are defined in the company code.
System Response
This assignment is not possible.
Procedure
1. Check the currency types of the company code.
2. Specify a corresponding depreciation area for each currency type.

Dear,
Rajesh.
Good Morning !
If your company code is having more than one currency than you will have to maintain that many depreciation areas.
OR
Before assigning COD to Company Code, delete the parallel currency maintained in multiple currencies in global settings.
below is the path:-
SPRO>Financial Accounting>Financial Accounting Global Settings>Company Code>Multiple Currencies-->Define Additional Local Currencies
After deleting you can assign the COD to Company Code.
After assigning you have go back again in define additional local currencies screen (mentioned above) and maintain the parallel currency which you have deleted.
You have first to Assign Input Tax Indicator for Non-Taxable Acquisitions in transaction code OBCL.
Check your parallel currencies in T.code OABT.
I hope this will help you to solve your issue. If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao.

Not able to Assign Organizational Units to the Sites

Hi all,
while configuring intercompany billing I am not able to assign the Organizational Units to the Sites.
I am in retail system and maybe here I have to do something else before seting up the intercompany?
Thanks in advance
L

Hi,
Go through the Building block and their prerequisites
http://help.sap.com/bp_bblibrary/600/html/R01_EN_DE.htm
http://help.sap.com/bp_bblibrary/600/html/R41_EN_DE.htm
Thanks
Chidambaram

Automatic comm channel when assigning Business system during configuration

Hi all,
In scenario file to file during Configuration,
During assigning business system there is a check box:
<b> 'Create communication channels automatically' </b>
I am planning to use File adapter on both receiver and sender side..
The question is Do I check this box or not ? If I do check this box it creates for me HTTP adapter ...Do I need it or not? I am clearly only using file adapter
thanks all !
Jon

U cannot use it in ur scenario. This function is supported for the following adapter types:
- XI Adapter
- HTTP Adapter
- IDoc Adapter
- RFC Adapter
See this
http://help.sap.com/saphelp_nw04/helpdata/en/42/d1a4d665c5574fa6e19784358ec948/content.htm
Regards,
Prateek

Assign business system

I have created a business system in SLD. When I want to assign this business system to the scenario, I can not find it in the wizard and also not show on Object tab. It is a new business system, I dont assign it to the other scenarios. How to find it?

Hi
You need to first import this business system from SLD into Integration Directory.
Go to objects tab -> right click on "Business System" -> Assign Business System.
In the new window choose your newly created business system and its ready to use now
If your Business system does not show in da new window, refresh the cache,
how to refresh the cache?
Goto ID -
> Environment -
> Clear SLD Cache, try the step of importing it again.
Hope this clears your doubts
Thanks
Saiyog

Not able to assign process server to file events.

Hi,
our requirement is we want a file event to be raised when ever a file is uploaded in BW.
when we tried to configured a file event we are not able to assign a process server. when we click on process server our bw process server is not popped up.
i am not clear what setting needs to be maintained in dataroot directory.
Process Server>>Parametes>>Data root directory
or
do we need to set up any platform agent on BW System
please advise.

Hi Anthon ,
1)Do we require seperate license for Platform agents and once after downloading the platform agent can we install from CPS side by submitting job definition or this is a BASIS job to install the platform agent on the system where we want the files to be detected.
2)is there any setting needs to be done on CPS side after we intall Platform Agents in the bw system.
Regards
Rajesh Dhaval

NOT ABLE TO ASSIGN MO:OPERATING UNIT PROFILE VAL TO A RESPONSIBILITY

I am trying to create new orgnization and assigning parameters in AP. I am not able to assign profile values. Could you pl. clarify foll points..
To generate seeded data, it is displaying(in the concurrent program) existing operating unit in the LOV not the new Operating unit that I created.
When i try to associate new Responsibilty to MO operating unit level, it is displaying existing organization not newly created org.
NOt able to assign profile values to business group(field is protected against update) as I created new ORG not with "setup Business Group".
When i click legal entity parameter in operating unit, it is displaying
"NO ENTRIES FOUND FOR LIST OF VALUES"
I would appreciate your early response
Thanks
Ven.
[email protected]

Hi Nagamohan
Your query returned me the seeded ones:
GL_AUTO_ALLOC_WF_PKG
PA_AUTOALLOC_WF_PKG
We have a value at the site level, and at the 1st OM super user responsibility having the issue has no default value, hence defaulting the value from the site level.
The other OM super user responsibility has a value. And this value is defaulted to the 1st OM responsibility profile from time to time.
The other responsibility OM Administrator have no problem. This value changes when the users logged into this OM super user responsibilities (both OU), the value switches back and forth to 2nd OU value and then the site level value fills the value for the 1st OM super user responsibility(even though we didn't have any default value before).
If the users logged into 1st OM Administrator responsibility to process the orders, then no problem, the value stays to the correct OU).
We have been relying on the defaulting value(coming from the site level) for all this time and have had no problems until now. It was always blank for the 1st OM super user. but, when the problem started then only it's having issue. I manually deleted the value (wrong value from the other OU) at the 1st OM Super user level, then next time the user logs into the 1st OM Super user resp, then it's having the correct value(same as site), and keep on updating the value with this correct value. But, all of a sudden it changes to the wrong OU value, don't know what object is causing this...
Thanks
Radhika

Service desk---not able to assign employee and user to a position

As i click on employee or user one popup comes and doesn't open. Therefore i am not able to assign a employee or user to a position.
Friends please help me out.
regards
Rajneesh

Hi Rajneesh,
yes, please use the IE and add the pop-up-page to the compatibility mode under "EXTRAS --> Settings for compotibility mode --> ADD".
Cheers,
Robert

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid of this.

Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

[HP Expert Day] "You are not able to restore this system with the media"

Welcome to HP Experts day!
I've got a long-standing problem since last year. Let's see if you can solve this!
I'll get straight to the point :
I am unable to perform recovery on my system. This is the error message :
It's a USB recovery media created with the HP recovery media utility on the same laptop. Tested to work correctly before I sent it for RMA on my SSD. It initially was running on a micron SSD. When I got it back, it was a samsung SSD instead, according to some benchmark results.
Laptop : HP Envy Spectre XT 13-2018TU
P.S I've already opened another thread on this last year.
http://h30434.www3.hp.com/t5/Notebook-Recovery/Unable-to-boot-from-USB-recovery-media/m-p/2197929#M1...
But they were stumped.

I had this exact same issue on a Spectre XT Pro Ultrabook.
The original SSD failed and I was sent a replacement, was fortunate enough to be able to create a Recovery USB stick using the wizard in Windows. When booting from USB I received the message "You are not able to restore this system with the media".
SOLUTION: You must NOT use the Recovery USB stick in any USB3.0 port (labelled SS). Using another USB port prevented this exact error message from appearing and I was able to complete the system restore process.
I hope this helps someone, I signed up and posted here especially for this reason!

NOT able to assign business system in ID

Similar Messages

Maybe you are looking for