Automatic comm channel when assigning Business system during configuration
Hi all,
In scenario file to file during Configuration,
During assigning business system there is a check box:
<b> 'Create communication channels automatically' </b>
I am planning to use File adapter on both receiver and sender side..
The question is Do I check this box or not ? If I do check this box it creates for me HTTP adapter ...Do I need it or not? I am clearly only using file adapter
thanks all !
Jon
U cannot use it in ur scenario. This function is supported for the following adapter types:
- XI Adapter
- HTTP Adapter
- IDoc Adapter
- RFC Adapter
See this
http://help.sap.com/saphelp_nw04/helpdata/en/42/d1a4d665c5574fa6e19784358ec948/content.htm
Regards,
Prateek
Similar Messages
-
Unable to assign Business System in Configuration
Hi,
I have created a new Technical system in SLD. I have also configured a Business system for it. But when i am trying to assign this system in Configuration, "Assign Business system", i am not able to see the newly created business system.
Please help me.
Regards,
Siva Maranani.We have already assinged the Integration server to their respective business system groups while creating the Business system groups.
BSG: XI_DEV --> UKD_400( Integration Server DEV )
BSG : XI_QA ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
Please help me understand if i am something in the configurations.
Thanks
Govind -
Problem in assign business systems in IB configuration
Hi ,
I have defined Technical systems,business systems properly in SLD and i also able to import my software components in Integragion Repository. i have defined all the data type , msgs types ,msg interface,msg mappings properly in IR.
But my problem is when iam trying to assign business systems in IB configuration scenario.
Business system list is not appearing in IB configuration.
Thanks
HariHi,
Check the following..
1) Check Whether that BS is already is Assigned to Another Scenario
2) If it is Assigned to another scenario means, goto Objects TAB -
Expand Service With out Party
Business sysemRight click---Add to scenario( Select ur scenario)
3) Do SLD Cache through Envoronment----SLD Cache
once you do this..
1) Expand Your Config Scenario--Service Without Party-Business SystemRight clickAssign
2) Say Continue-Say Continue Select ur BS
3) Un check the Check Box Bottom of the Window
go throgh these blogs too..
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Thanks,
Vijaya. -
I have created a business system in SLD. When I want to assign this business system to the scenario, I can not find it in the wizard and also not show on Object tab. It is a new business system, I dont assign it to the other scenarios. How to find it?
Hi
You need to first import this business system from SLD into Integration Directory.
Go to objects tab -> right click on "Business System" -> Assign Business System.
In the new window choose your newly created business system and its ready to use now
If your Business system does not show in da new window, refresh the cache,
how to refresh the cache?
Goto ID -
> Environment -
> Clear SLD Cache, try the step of importing it again.
Hope this clears your doubts
Thanks
Saiyog -
NOT able to assign business system in ID
Dear all ,
i am not able to see my business system in the list when am trying to assign
business system.
i also tried refreshing the SLD cache but not working.
if u can help.
Regards,
Tarang ShahHi Tarang,
Just check if you have the right permissions to do that.
It can also happend that the businees system is not added in the SLD or SLD has to be refreshed.
regards,
younus -
Cannot see a user id when assigning Business Rules to a user
User is properly provisioned in Shared Services. But cannot see her when assigning Business Rules security.
please help me with this issue.
thanks,
Ricky...Hi,
In AAS, under HBR node, right click Administration and refresh user list.
You could also try to refresh the security from shared services.
HTH
Seb -
Error while assigning Business Systems in Integration Directory
Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad -
Assign Business System in Integration Directory
Hi all,
i have basic question.
in my ID, there are some configuration scenarios.
for example, the left side look like,
in case,one of Business System created on SLD was assigned to one of configuration scenarios,
i would need to assign same business system into Business System in Service Without Party in another configuration scenarios, it was not possible to assign.
can i assign BS1 to several configuration scenarios?
or should i create Main scenario in order to define communication channel?
thanks in advance
venjaminHi venjamin
Yes, you can assign the same business system to different configuration scenarios.
to do this there are 2 ways.
1. Open the cofiguration scenario to which the business system has already been assigned.
Right Click on the Business System> Add to Scenario> Select the scenario to which you want to
assign your business system.
2. Select the objects tab>service without party> business system> your business system> right click-->
assign to scenario and then select your scenario.
Hope this helps,
Regards,
bhavesh
Message was edited by: Bhavesh Kantilal -
Problem Assigning Business Systems
Hi,
Landscape: New XI 3.0 SR1 Installation, W2K, oracle.
SLD: on a separate server with ABAP+J2ee. ABAP datastore for UME. Updated with new CIM, CR content.
Followed oss note: 768148 - Using a separate SLD for XI
We completed all the settings as per post-installation guide and XI configuration guide. We were able to connect & create the technical and business systems for XI and R.3 ECC 5.0 in the SLD.
SLDCHECK in XI server is fine, and shows the correct information about the SLD.
But when I am trying to assign a business system in Integration Directory - Service without third party, in the following wizard I am getting an error message
"Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed"
Any help would be appreciatedHi Rao,
The following links u may find it useful.
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
http://www.sap-press.com/downloads/h982_sample_chapter.pdf
*Please Reward points if u find it useful.
regards,
gyanaraj -
XI - Error Assigning business system services for A2A configuration
Hello!
I am working with the integration scenario plan_driven_procurement_supplierenablement and the integration scenario configurator. Performing the second step - assign services following error occurs:
An error occurred when accessing the SLD server
MESSAGE ID: com.sap.lcr.api.cimclient.LcrException (serialized)
com.sap.lcr.api.cimclient.LcrException: User credentials are invalid or user is denied access
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:577)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:341)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:198)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:146)
at com.sap.lcr.api.cimclient.CIMOMClient.getInstance(CIMOMClient.java:572)
at com.sap.lcr.api.cimclient.CIMClient.getInstance(CIMClient.java:1250)
at com.sap.aii.ib.server.sldaccess.SLDReader.getCIMInstance(SLDReader.java:224)
at com.sap.aii.ib.server.sldquery.SLDQuery.readSLDElementAssociatorKeyList(SLDQuery.java:941)
at com.sap.aii.ib.server.sldquery.SLDQuery.selectSLDElementList(SLDQuery.java:656)
at com.sap.aii.ib.server.sldquery.SLDCache.actualize(SLDCache.java:34)...
Could you please tell me which user is meant? Where can I change it?
Thanks a lot - BarbaraName: Plan_Driven_Procurement_SupplierEnablement
Namespace: http://sap.com/xi/SRM/Basis/Global
Software Component Version: SAP SRM SERVER 5.5
The problem is the connection between the Integration Scenarion Configurator (Integration Directory) and the central SLD which means that the XI is not on the SLD host.
When I try to assign the business systems, which I created in the SLD, I have to assign a service (business system) to every single role. When I am trying to add a line and display the list of permitted values a new box opens in order to select the service.
Selecting the product, i.e. SAP R/3 the pop up with the error appears.
Do you need more information please let me know which! -
Why specify Integration server when create Business system?
Hi, all:
I had difficult understanding why we need to specify the assigned Integration Server when we create Business System. What is the reason for this? What is the mechanism underbeneath this?
It is easy to understand that when creating BS, you need to specify TS name, product and SWCV. But why integration server?
Will you please explain to what your understanding it regarding this topic?
Thanks,This is because the same SLD could be used to connect to more than one Integration Server. This is a typical requirement wherein the system landscape has Dev, Quality & Production systems and all the XI servers uses same SLD. At that time it would be easy to specify which Business system will refer the Integration Server of which XI system.
Regards,
Prateek -
Authorization error when exporting business system
Hi ,
I am on XI 7.0 spo9.I am trying to transport from dev to qa .
I am able to easily export (login using xisuper ) Technical system.
However while exporting Business system .when it gives me to download a file I get an authorization error .
Kindly helpHi,
Check XISUPER has the below roles in SU01.
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_ADMINISTRATOR
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_SLD_ORGANIZER
SAP_SLD_GUEST
add the above roles for XISUPER and get the green color those roles using Tcode : PFCG.
The above roles should be in green color.
Regards,
Venu. -
Error when assigning business partners to positions in org. mgmt.
Hello,
I've got the following problem. I want to assign business partners to a position in organisation management. When doing this, the following error occurs:
"Object cannot be assigned to object xxx in the period xx.xx.xxxx - xx.xx.xxxx"
(xxx is the position to which the business partner should be assigned)
The number of this error message is 5A368.
Diagnosis in the detailed description of this message:
"The object period of object '1st Level Support' is not within the relationship period 26.03.2007 - 31.12.9999."
I've changed the object period of the position "1st Level Support" to several other dates, but it did not solve the problem.
The described problem does not occur, when assigning an user to this position.
Can anybody help me with this problem? I'm using SolMan 4.0.
Thank you in advance!Thanks for your answer so far. Unfortunately it's not possible for me to upgrade to SP11. So I tried to solve the problem the way you described. I double-clicked the position on the left, the desired position is shown in the main screen and I try to assign the business partner to the position. But the same error appears.
Are there any other possible solutions?
What are the consequences of assigning users to a position instead of business partners? -
Problem Occured When assigning Provider system to service Group
hi,
Im trying to invoke external webservice into webdypro project(CE 7.1 ehp1) using Adaptive Webservice model.
-->I created Service group for that webdynpro application.
-->I created Provider system.(it is in active state only).
-->when im trying to assign the Provider system to the Previously created service group,
its giving the following exception.
An Unexpected ER Technical Exception occurred .
any idea on this issue?
Thanks & Regards
Sowmya.THi Sowmya
Say me one think, do you use a trial version of CE?
I have the same problem with the trial version. However, today I've deployed my application in a official released version of CE, and this error don't occur. Maybe this is an error of trial version.
Regards
Marcos. -
Automatic commit/rollback when debugging
Hi,
A colleague of mine who I asked to use SQL Developer instead of TOAD for debugging, was very surprised to found his debug session to have committed at the end. TOAD doesn't. He lost a lot of time undoing the unintended changes.
He made me remember I went to the same thing when I first used sqldev.
Instead of automatically assuming you want to commit or rollback, this really should be asked on successful completion. Or set a preference: ask, commit, or rollback.
Anyone who agrees, please vote on the added feature request: http://htmldb.oracle.com/pls/otn/f?p=42626:39:1493919074214847::NO::P39_ID:28041
Thanks,
K.It's not really a bug, but a nasty feature.
You can only vote on the mentioned request to add weight for future implementation.
Until then you can put a breakpoint before completion, and when halted there, stop execution with the red stop button.
Have fun,
K.
Maybe you are looking for
-
I burned some Blu-Ray before with my new FCPX, now I get a "Failed" message when I try to share both Blu-Ray and DVD to hard drive for an image or actually burn a disc. I saw one answer was to trash the com.apple.final...plist files but I do not know
-
Error : idoc xml data record : in segment attribute instead of SEGMENT
hi all i am doing the file to idoc scenario. in that i am getting the error error : IDOC XML Data record : In segment attribute instead of SEGMENT i am doing this scenario since 4 days. can anyone help me thanks a lot Vasu
-
Bandwidth command in 3500Xl switches
Hi, I have seen a bandwidth command in the interface config mode. When I apply it, it does not limit the traffic. I have to limit a traffic on a perticular port to which a PC is connected. THanx sagar
-
A few days left to return my AEBS. Trying to make the call
I like the wireless-N functionality of the AEBS. I love the ability to attach an external hard drive, but I have some concerns that Apple will make good on Time Capsule like functionality for the AEBS. Can anyone give advice on if they would return t
-
HT4623 Why doesn't my I phone 4 have a software update option in the general settings?
I have an I phone 4 with a 4.2.7 ios. Why isn't anything in my general settings that says software update?