Not able to debug the ZDEG(Z OUTPUT) MEDIUM Distribution Ale

Hi All,
I am not able to debug the ZDEG output type for Shipment (Medium is Distribution ALE).
Executing the VT02n providing the Shipment and selec the GOTO Menu the Output tab and Select one (EX ZDEG) Output type. I have kept the break point in the Program RANASTED and Form Routine ALE_PROCESSING.
Table record in TNAPR table.
023 ZDEG A V7 RSNASTED ALE_PROCESSING
Could you please let me know how to debug this output type code.
Thanks In Advance.
Venkata

Which ERP version that you are using? If the system is ECC 6.0, then you can activate the session break-point in the print program. You can also activate form debugging option on using transaction SE71, enter name of the form (ZDEG), from the menu, Utilities->Activate Debugger. Hope this help you.

Similar Messages

I am not able to open the html format outputs of SQR

when I am trying to open SQR html formate output generated by SQR jobs not able to open the html format outputs of SQR getting below error
but I am able to open pdf and excel formats outputs
"An error was encountered while attempting to retrieve audit_control_info_frm.htm from the Hyperion Reporting and Analysis - System 9. This error is normally encountered when there is no free disk space on the machine hosting Hyperion Reporting and Analysis - System 9 Application. Hyperion Reporting and Analysis - System 9 Application uses a directory on the hard disk to store temporary files while downloading objects. To rectify this problem, if the disk hosting the Hyperion Reporting and Analysis - System 9 Application temporary directory is nearly full, free up additional disk space. After confirming that there is available disk space, restart ALL Hyperion Reporting and Analysis - System 9 servers. <p>Another possible cause of this error is that you have attempted to embed a "Versioned Collection" into your Personal Page. A "Versioned Collection" is typically created when you publish a document and request the creation of an additional compressed copy. Embedded "Versioned Collections" are not supported by Hyperion Reporting and Analysis - System 9.
A general error was encountered contacting the server.
Recommended Action: Contact your corporate technical support."

Welcome to the Apple community.
Have you tried restarting your web browser, if that doesn't help you might try emptying your web browser's cache.

Not able to debug the start routine

Dear All,
I am facing a weired situation.
I have a transformation(DSO -> Cube) with start routine. I am able to debug the routine in Development System.
I transported the routine to Production System successfuly, but i am not able to debug the start routine there. I have all the necessary authorisations(SAP_ALL, SAP_NEW)
I am perplexed. Never seen such issue before.
Can someone help me here?
Regards,
Avinash.
Edited by: Avinash Kumar on Nov 5, 2008 11:16 AM

Dear Jerry,
Thanks for writing.
I followed the instruction, but it didn't work.
Can there be any technical reason for data package to be empty, even if the source has data(Note: There is no filter in DTP)?
Also, i just checked with other start routines...I am not able to debugg there also. System is not entering the debug mode.
Here, the patch level is: 0010. Can this be the villain?
Please advise.
Regards,
Avinash.
Edited by: Avinash Kumar on Nov 6, 2008 4:26 AM
Edited by: Avinash Kumar on Nov 6, 2008 4:51 AM

Not able to debug the BADI implemntation-for badi "BBP_ECS_PO_OUT_BADI"

Hi ,
Currently i need to debug the implemenation YBBP_ECS_PO_OUT_BADI" of the badi "BBP_ECS_PO_OUT_BADI" this is used for tolerance check .but in the portal when i am click on the confirm button this implementation need to be called for checking the tolerance but in my case the badi is not at triggering. can any one give the solution for the above problem.
how can i find the program calling the BADI implemenation YBBP_ECS_PO_OUT_BADI .can i know this from the portal.help me

Hi,
Please go through the following links:
Re: Debug PO transfer
How do debug BBP_ECS_PO_OUT_BADI?
Thanks,
Pradeep

Not able to debug the client script in IE11

Hello Experts,
I had to debug the client side script though my application but when i try to do the same i am getting error saying "Unable to attach to crashing process. The process has been terminated. Try refreshing the process list before attempting another attach".
Before this when comes to select the debugger , top of the dialog box shows error "An unhandled exception (Script BreakPoint) occured in iexplorer.exe ".
# I have check the registry entry under HKLM/software for the JIT debugger - it's set to 1.
# I have uncheck the internet option checkbox for disabling the debugging the script.
Still no help. Please guide me through this.
Thanks,
Jagbir Singh

Hi Jb9952,
In addition to what Rob suggested, regarding using F12 tool to debug, you may take a look at the following articles:
How to use F12 Developer Tools to Debug your Webpages
And:
Using the F12 Developer Tools to Debug JavaScript Errors
Best regards
Michael Shao
TechNet Community Support

Not able to get the alerts in CCMS to distribution lists.

Hi All,
I have created the distribution lists -
>Create Auto reaction Method ->Assigned the distribution list is added in the Parameters
SENDER                 DDIC
RECIPIENT              CCMS_2
RECIPIENT-TYPEID       C
REACT_ON_ALERTS        RED
SUBJECT_ALERT          $SID: RED Alert for System $NODENAME ,
SUBJECT_ALERT_CONT     $NODENAME
TIME_ZONE              EST
and Assigned to auto reactions method But there alert are not generated to CCMS_2 distribution lists.
Regards,
Neni

Hi Jagadish.
Have you maintained an Email id for the user DDIC in SU01?
Where do we need to add ?(I need alerts for 2 Email ids )
Have you checked whether you are able to send mail to distribution list directly from SBWP?
how can i test this?
Regards,
Swaroop

Not able to Debug in SMQ1 - CRM MIDDLEWARE

Hello Experts,
There is a failed queue in SMQ1. But we are not able to debug the queue which we were able to do couple of days back. Clicking on the DEBUG icon results in the same error message which we get when we just reprocess it.
Thanks,
josh
Edited by: Laxmi WIPRO on Oct 18, 2010 12:07 PM

Hi Laxmi,
Txn. SM59, Browse to ABAP Connections and locate the logical system you need to debug from your CRM system. Eg : Assuming your data is flowing from CRM to ECC whose logical ID is ECCCLNT100, then search for this logical name ECCCLNT100 in the list of connections, double click on it....browse to the 3rd tab "Logon and Security" and edit the user maintained in the Logon area. This user should be a dialog user.
For an inbound queue SMQ2, all FMs are executed at the CRM itself, so you'll be able to debug them...but for debugging SMQ1 you need to have a dialog user which has an access to the ECC.
Thanks,
Rohit

Not able to debug XSJS service

Hi,
I am receiving following error on launching debug configuration:
"Failed to check if system is secured"
I believe because of above error i am not able to debug the .xsjs service.
I am setting Host and Port for debug configuration same as i am using to test service in browser.
Thanks,
Rahul

Hi Steve,
My problem is resolved but it had nothing to do with privilge or debug configuration.
I am not sure why your URL looklike IPjdbc:sap://localhost:30015/.
Your URL should be XSJS service in hana server.
Are you getting popup for sessionid while launching your XSJS debug configuration?
Can you please confirm above question and then i might suggest something?
Thanks,
Rahul

Not able to debug BBP_GROUP_LOC_PO badi in SRM

Hi Experts ,
I am not able to debug the badi BBP_GROUP_LOC_PO .
I have set the external break points in the BADI .
Is this geting called in Background? In that case what needs to be done?
Regards,
Sunitha

Sunitha,
you can debug badi BBP_GROUP_LOC_PO BADI only after execute the program BBP_SC_TRANSFER_GROUPED.
Keep the external bp in your Badi implementation and later execute the above program. It will exactly stop the place where you place the BP.

I am not able to modify the text in pdf output file using pdf editor

Hi,
We have upgrade the xml 5.6.1 in server level. After upgrading this, we are not able to modify the pdf output file. Previously we used to modify text and delete text in pdf file which is generated by oracle Application. As of now we cann't upgrade higher version. Can you suggest what to do?.

Check the xdo configuration file option in the user guides. There should be options that allow / disallow modifying text specifically. If you are in EBS, you should be able to change the configuration file options from the XML Publisher Administrator UI.
Klaus

Not able to view the webhelp output in Robohelp 9

Hello,
I am in a project where we have to create webhelp output from Robohelp 9. Whenever I generate the webhelp ouput I am not able to view the the contents. Although, the webhelp is opening in a browser window but there are no topics present in the contents. The other ouputs like .chm and .dox are fine, but there is some problem with the webhelp which I am unable to figure out.
Regards,
Ruso

What browser are you using?
If Chrome, try something else. Chrome works fine with help on the server but not locally. There is more in Snippets on my site about the Chrome issue.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Not able to view the excel output from eBS

Hi All,
I am not able to open the reports for the first time and this error is keep on coming everyday whenever i try to open any report for the first time.
     Microsoft office Excel cannot access the file 'http:// '. There are several possible reasons:
     The file name or path does not exist.
     The file is being used by another program.
     The workbook you are trying to save has the same name as a currently open workbook
But in the second time o/p opens without any issues.
Can you please let me know what will be the cause of the issue.
Thanks
Rajesh

What browser are you using?
If Chrome, try something else. Chrome works fine with help on the server but not locally. There is more in Snippets on my site about the Chrome issue.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Not able to debug z program attached to special funtion in processing routi

Hi,
I want to debug my z pogram. attached to special funtion in processing routine.but not able to debug But debugger is not passes through that z program if i passes through transaction vl02n.
Regards,
Ranu.

Hi Sharma,
if the output type is triggered automatically and sheduled background and creating spool or sending mail.
then try this way.
Write the statemnet in your program to debug the program in Background.
data : w_flag type C.
do.
if w_flag = 'X'.
exit.
ENDIF.
enddo.
and execute the VL02n and go to t-code SM50 and select your program and got to menu >program->program> Debug
the the program stops in your Zprogram and make the w_flag to 'X' and continue debuggin zprogram.
Regards,
prabhudas

Not able to get the taxonomy field value of meta data field type

Hi Everyone,
Not able to get the taxonomy filed value from the metadata filed type.
Any one can help me on this.
Label, TermGuid, ValidatedString are showing empty when i debug the code.
Below is the code which i used to get the taxonomy filed value

Hi,
Can you please try getting this way?
var taxonomyField = listItem.Fields.GetFieldByInternalName(fieldName) as TaxonomyField;
if (taxonomyField.AllowMultipleValues)
var fieldValuesCollection = listItem[taxonomyField.Title] as TaxonomyFieldValueCollection;
return fieldValuesCollection.Select(x => new Guid(x.TermGuid)).ToList();
else
var fieldValue = listItem[taxonomyField.Title] as TaxonomyFieldValue;
return new List<Guid>() { new Guid(fieldValue.TermGuid) };
Hope it helps!
Thanks,
Avni Bhatt
If this helped you resolve your issue, please mark it Answered

Not able to debug the ZDEG(Z OUTPUT) MEDIUM Distribution Ale

Similar Messages

Maybe you are looking for