Not able to do borderless printing properly

I have an HP 7960 photo printer.  Just recently it starled leaving about 1/8" blank at the top of a page when bordeless printing is selected.  The rest of the page is fine.  I am running XP service pack 2.  How do I correct the problem.

What is the size of the photo paper you're using, and what is the dimensions of the photo you're trying to print?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Similar Messages

  • Not able to install my printer on my Asus Laptop. I have the Hp OfficeJet 6400.

    not able to install my printer on my Asus Laptop. I have the Hp OfficeJet 6480 and an Asus X550C running Windows 8.1. After downloading the software on HP's site nothing happens after it downloads and does the extract process. The installer just dissapears. If I try to uninstall it, I get a message saying that it's running and cannot ininstall. I've tried the Print and scan doctor as well as the Installation wizard. Also disabled firewalls .... nothing works
    This question was solved.
    View Solution.

    It turned out to be a corrupted .dat file in the windows directory. Removed it and problem solved!
    dw

  • I just bought a new printer for my iMac version 10.7 but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!!

    I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!

    I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!

  • Not able to determine the Approvers properly due to data in Approval Master

    Hi All,
    Not able to determine the Approvers properly due to data in Approval master Master table error. This was affected my approval flow. plz help to resolve this.
    Thank you.
    Edited by: ganeshsrm11 on Apr 13, 2010 6:48 AM

    Hi,
    Which table are you talking about? Do you have technical table name? If it is custom table you need to fix your custom program code.
    Regards,
    Masa

  • HP Laserjet p1102w blue WIRELESS light keeps blinking and computer is not able to locate the printer

    Have been using the printer on wireless and it was working fine until I had to cancel a print and might have accidentally press wireless button and "X" cancel button together and havn't been able to print since.
    Did everything: 
    - update firmware: LJP1100_P1560_P1600_FW_Update.dmg
    - update printing software: HP-ePrint_v2.4.1.dmg
    - Reinstall wireless setting
    But the printer will now shot from Add new printer- Bonjour setting.
    The odd thing is When I switch the wifi on computer on and off the printer will show in Add new printer- Bonjour setting, for a second and disappear again. 
    The printer still works via cable. 
    There were 3 machine using the printer via wireless now has all same issue. 
    Thank you for any help or tip! 

    Hello eeoorhee,
    Welcome to the HP Forums.
    I see that you are having an issue with connecting the printer over the wireless connection.
    I have a few steps that we can take to troubleshoot this issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I also suggest that you do an uinstall of the software and drivers and reinstall.  Please click on the link that I have added for when The Printer is Not Found During Wireless Installation.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I am not able to use custom print sizes when printing to my HP Z3200 24" printer?

    So in CS5 we were able to print to the custom sizes we created in the print screen for our HP Z3200, but for some reason we haven't been able to use the custom sizes in CS6, you click on a custom size and when you say ok from the printer settings and it goes back into Photosop print settings it binks back to 8.5x11.  You can use the standard sizes that came with the HP print software, but not any custom sizes you creat.  Is there a setting somewhere in Photoshop that I need to change?
    Any help would be appreciated.
    Suzie

    Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
    To help others help you, please read through this article and provide any additional relevant details.

  • HP DV6500 Laptop - Not able to get sound working properly.

    I had this running arch fine about a year ago, I just recently reinstalled Arch and everything is good except for the sound card, which is giving me fits.  What I would be used to seeing in say, amixer, would be PCM, Front Center etc etc, now it only shows PC Speaker, BAseFRQ, and Master.  Initially it would play sounds but made an -awful- screeching sound, after some tweaking and trying to follow some things on the wiki it just makes the screeching sound now and doesn't ever play the sound.
    Running alsaconf does come up with hda-intel, Intel Corporation 82801H (ICH8 Family) HD Audio Controller, which sounds right, but it just doesn't seem to work properly.
    Rather than flood the initial post with what may or may not be entirely useless information, if anyone can give me some commands to run to get any information that would help I'd appreciate it.

    Vryali wrote:
    I'm using Chakra, as well, if that helps :x
    Thanks D:
    Actually, that bit of information is the most important, remember you will help the Chakra project, and help yourself asking in their forums, they might just get the click on what is going on, or if this is a known issue. Even though we support community projects to be created, is not that easy to give support to users of community projects, as they might have introduced a change that makes it all behave differently.
    My only advice would be to put "!snd_pcsp" (without quotes) in the MODULES array of /etc/rc.conf

  • With CS2 (Win XP), why am I not able to see a print option for 13x19" output?

    I have printed smaller pages, 4x6 and 8x10 inch, with my CS2 to my HP Photosmart Pro B9180 printer.  However, I am now ready to print 13 x 19" prints and there is not option in the printer setup in CS2 to select it.  I even converted 13x19 to 330mm x 483 mm and there isn't an option in milimeters either.  Can anyone help please?  David

    Thanks for your response.  I hadn't mentioned I was using a B9180 icc profice and since the 9180 can print up to 13x19 inches you'd think there'd be an option to do so, so I'll recheck it.  Thanks again.

  • Officejet 5610 not able to create custom print sizes

    Hi -- I use my Officejet 5610 for both my work and my personal printing needs.  On my work computer which has Windows XP as the operating system,  when I got to Properties and Paper Options/Quality tab there is a button for me to select "Custom Size".   On my personal computer which has Vista Home Basic as the operating system there is no option on the Paper Options/Quality tab to choose a custom print size.  Is there a driver that I might be missing which would allow the custom print size on the Vista computer?  I'm trying to print envelopes which are 6" x 9" and nothing I do seems to work.  I have managed to print one envelope using Letter size but that took about 6 hours to get one printed.   My envelopes keep causing a paper jam -- which once cleared from the printer is still showing up as a jam on the computer and I have to re-boot the whole system to clear it.
    Any suggestions would be greatly appreciated.
    Thanks!

    Hi,
    Try the following
    open solution center> Setting> Printer Settings> Print settings and you will find a custom option there and then create a new size and give it a name and when you print from any application you will see the new size reflection in the application. Are you not seeing the custom option as seen below?
    I was an HP employee
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • Not able to install smart print

    after downloading software to activate smart print I get an error message when trying to run it. The message says "Installation package could not be opened. Contact the application vendor to verify that it is a valid Windows Installer Package

    Hi poonamngr99,
    What operating system are you using?  Is it Windows XP?
    Best Regards,
    SmartPrintRUs
    * Disclaimer: I am an HP employee

  • Printing issues i'm not able to change the print order it always prints back to front.

    I have an HP Pavilion  model p6112p. Operating System is Vista Home Premium 64-bit, with an HP Deskjet Printer Model 6980.
    The issue is I am unable to change the printing order of multiple page printing, they print from back to front on everything that I print, even my Quicken Checks, print back to front. I am unable to resolve this issue. HELP!!!! 

    I changed the code a bit. I removed the graph and replaced it by a value, the same error occured.
    How to reproduce:
    1) Exit LabVIEW completely (VERY IMPORTANT)
    2) Open and run the attached VI
    3) change the value of the 'value'-control to eg. 2.2 by typing in the value.
    4) press on the print button
    5) try to change the value of the 'value'-control to eg. 5.0 by typing in the value. This is NOT possible.
    Changing the value with the arrows is possible.
    6) stop the VI.
    7) restart and no problem will occure.
    8) Completely exit LV, restart the VI (and LV), the same error appears again after having printing the front panel.
    I notice this only with LV 6.0.2. With LV 6.1 it seems to work fine.
    Attachments:
    PRINTfp.vi ‏28 KB

  • Not able to choose to print in color instead of Black and white

    Good afternoon!
    I have a HP photosmart 5510e and i am running a windows 8.1. I am trying to print some photos but i am unable to have them print in color. I have looked all through the settings on the printer but i dont get an option to change it

    Hi,
    It sounds like your printer is operating in grey scale mode. I've included a screen shot below of what the grey scale/colour toggle looks like on my Windows 7 setup.
    You can check that you have the most recent Windows 8 drivers here
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • RoboHelp not able to generate PDF document properly

    Hello,
    I have RoboHelp for Word V9.0.2 and when I want to generate a PDF file, I've got many topics named 'No Data', and some of the parts only of my document has been computed.
    What am I supposed to do to have a clean source file in order for the PDF generation to be done correctly?
    Have you got any idea?
    Thanks.
      Philippe.

    Re,
    I've tried to update the options into Word associated to Template add-ins, but nothing changed.
    I've also tried to set the lowest rights to macro, but, didn't change the issue.
    Tried to erase the RTF by keeping the .doc file and tried to erase the .doc file by keeping the .rtf one.
    Maybe it is due to pictures which have not been inserted through True Code. I've tried to change it, but nothing happened in the menu display mode : 516 pages are changed in an half of seconds. I doubt it is working correctly.
    Anyway, I don't know what to do further...
    Ideas?
    Thanks.
      Philippe.

  • Commit misbehaving, not able to see committed data properly.

    Hi,
    Please advice for the following problem.
    Problem Desc:
    =============
    Note : In actual scenario many tables(min. tables which are inserted around 4) are inserted and than once everthing is ok for transaction commit is done. I have taken a sample scenario, for your investigation take this point into consideration.
    1) Insert into table A{schema}==> Trigger fires==> It insert Primary Key of Master table A into TableB{Schema B} once commit is done by original session. =========> This process is continuous.
    2) Now EAI program is always running which checks whether any Primary Key is present in Table B, if found, it queries table A and gets the remaining data.
    Problem occurs here, when it finds Primary key in Table B, but when it queries in Table A it shows no record, failure occurs and transaction is not processed further by EAI. But when we manually query the table we found out the Primary Key is present in the table A.
    We suspect either this due to some block level contention in SGA or the dirty block buffers states are not updated really qucik in DB buffers. So when the commit if fired the lastest block queried by Table B seems to become ditry blocks(committed) and later on block for A.All this seems to happening very fast, unfortunately we can't mesaure this event in terms of time. While all this happening i guess EAI query table B, find data, queries A, no data found.

    By default, Oracle9i RAC systems are set up with a MAX_COMMIT_PROPAGATION_DELAY set to 7 seconds. This might be the cause of your problem.
    This means that for 7 seconds the 'other' nodes can not see the committed data and any queries that occur in tat time from the 'other' nodes will use their last known CR block to reconstruct the data.
    Frustrating as anything to understand and, until one catches on, totally scary for anyone believing in Oracle's transaction management . The initialization parameter has been defaulted to 0 in 10g.
    http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96536/ch1107.htm#1019345

  • Not able to see the values properly

    Hi,,
    I am using Jdev 11.1.1.5.
    I see the value of “val.toString()” is correct and the Sql of the view is fine. Then what can be the reasons that no values come out in the popup?
    Why do I get “No data to display” within the popup once I clicked the link?
    Could any other people help pls?
    Edited by: Hua Min on Apr 4, 2012 5:02 PM

    Hua, you must be kidding...
    Do you expect us to read and somehow digest your other 30+ post long thread?
    You don't even bother to give the minimal needed information (which you should know by now!).
    Timo
    Edited by: Timo Hahn on 04.04.2012 09:18
    OK we are half there. You edited your original post. so let me do the same.
    I don't see a jdev version...
    No use case?
    What do you try to do?
    What does ExecuteWithParam execute?

Maybe you are looking for