Not able to integration process(BPM) objects in ID

hi,
I have created one integration process(BPM) in IR part but I am not able to see it in my ID part.
when I tried to import it thru IR its not showing me in list.
Please let me know.
Thanks,
Bhupesh

Check:
1) If BPM is activated in IR
2) If the Cache Status Overview of IR is showing any error entry....normally even when you activate the objects you may not view them in ID when there is an error in the cache update.
Regards,
Abhishek.

Similar Messages

Alerts in Integration Process (BPM)?

We are just beginning to use Alerts in PI 7.1. If an error occurs in an integration process (BPM), will it trigger an alert if the Alert Rule is defined wide open? Or do you actually have to trigger the alert in the integration process with an additionl step to trigger the alert?

The Alert has to be defined in ALRTCATDEF.....no matter where the alert comes from (IE, AE, BPE)
If an error occurs in BPM and you have not mainatined proper exception handling for it then....and if the processing shows in red in SXMB_MONI then the alert will be raised as IE alert
However if you have implemented exception handling for a step and then in that exception branch you raise an alert then your BPM will raise alert....the subject of your alert email will be Process <ProcessID>
BPM related alert can be either with static text (using Alert Container Variables) or Dynamic text (using some value from payload)
Please note that to raise an alert from BPM it is not compulsory to only raise it as a Dynamic Alert......static alert can also be raised.
The documents which are available for lower releases are still applicable in alert creation.....so existing blogs/ docs should work
Regards,
Abhishek.

Users are not able to login to BPM worklist application from one of the AD.

Hi ,
We are using FMW11g ( 11.1.1.6.0) and configured 2 AD's.( AD-1 & AD-2). We are able to see users from both AD's in the weblogic admin console. Users present in AD-1 are able to login to BPM worklist application without any issue but users from AD-2 are not able to login to BPM application. Could any one please answer 1) Can we configure 2 AD's to FMW11g ? 2) If "YES" , what configuration needs to change to users login from AD-2.
Please let me know if any more information need.
Regard's
Naveen

Hi
NO. You CANNOT use more than One Security Provider for a BPM Workspace Application. Only the top most first Security Provider will work. In your case you have 2 ADs security providers and only users from top most can login. Yes, you can see the Users from both and infact all the Security Providers that are configured. It is the limitation of the bpm workspace application and its corresponding security framework.
Out of box, if you use default AD Configuration then there is nothing you can do. Only the first top most will work. If you really really want you need to use totally custom authentication provider where you will write your own code for authentication. Remember this development is pure weblogic security related one and you need to have good understanding of internal weblogic security. I would not recommend this.
Here is one old post. This old post has 2 other old posts worth visiting to get more details:
Re: Use multiple ActiveDirectory as authenticator provider
Re: oracle soa and active directory integration (Different requirement/usecase)
Thanks
Ravi Jegga

Data in internal interface not able to be processed

Hi gurus,
We upgrade our R3 server to EHP 7.
After EHP 7 upgrading, I am trying to collect data for 0CO_PC_ACT_10 extractor.
When I enter a filter value to RUN_APPL, I am getting this error: Data in internal interface not able to be processed (Message ID: C+701)
If I leave this RUN_APPL empty, I am getting data without error.,
I tried to reactivate the datasource from SAP R3 system but nothing changed.
It was working correctly before the upgrade.
What should I do ?
Do you have any suggestions ?
Thanks for your help.

Thanks Michael,
We downloaded this note by SNOTE transaction to our R3 Dev. system but its status seems to be not implemented.
Our SAP_APPL version is: 617
1845346 note can be impemented between 600 - 616.
Thanks.

Performance tuning in objects involving Integration process (BPM)

Hi,
We are facing a performance problem in one of our objects having integration process. The messages are getting processed sequentially instead of parallel processing within the integration process. As a result, the messages are getting queued up in the queue waiting for processing. Thus by the time all messages get processed, the time taken would have been alarmingly high. There is no correlation involved in the int process. My questions are
1. Is there any performance related best practices/checklist/config steps available for BPM related implementation. If so, please furnish/provide the links if any.
2. If it is not related to BPM , but related to tuning up of the queues, please provide the guidelines for queue tune up.
3. How to ensure that the messages are processed in-parallel within BPM ?
Regards
Ganesh

Hi,
Am not sure whether this would help you. By any chance did u use For Each instead of Par For Each.
Cos, when u use For each in an container step, all messages would be processed sequentially.
Do let me know if it helps you!
Regards,
B.Anandh

Handling fault messages in an Integration Process (bpm)

I have a bpm in PI 7.11 which performs a synch call to an external webservice. In addition to the request/response, that webservice can also generate two faults: ObjectNotFoundFault and generalfault. I am having trouble handling these faults - when a fault occurs my handler is not being invoked and thus the bpm process stops/errors. When I look at the underlying process (via txn swi1), I see the exact error text:
"No exception defined for fault message ObjectNotFoundFault http://www.companyb.com/services/olsa_v1_0/"
From what I understand within the bpm synch call step to the webservice I need to do the following to handle the exception/fault:
- put the synch call (to the webservice) into a block
- add an exception branch to that block named let's say A & set the exception handler of that block to be A
- in the exception setting of that synch step, select A
In my case, I don't care about the fault details other than to ensure it does not stop the whole Integration Process, so in my exception branch I don't do anything. I did try adding a control step within it too (as per SAP Press text book).
Is there anything else I need to do here? I am not mapping the returned fault - does the fault need to be mapped (not sure how I would do this given that the synch step uses an abstract interface and therefore to my knowledge no fault mapping can be done)?
There are 2 Notes that describe my issue exactly:
https://service.sap.com/sap/support/notes/1484903
https://service.sap.com/sap/support/notes/1158699 <-- this one refers more to me, but we already have in 7.11
Can anyone let me know exactly the steps I would perform to handle these faults - does the exception name / handler A above need to be named the actual exception / fault ObjectNotFoundFault?
Any help appreciated.
Thanks,
Keith)?
Any help appreciated.
Thanks,
Keith

Thanks - my scenario I guess is #2 of that blog. But is your take that even if I don't care what is in the fault message, i.e. I don't care about the contents of it but rather I just want to continue on from it, that I still need to perform this java coding? It's not clear to me from what he says - it seems to me he does the java coding to actually capture the contents of the message. I am in fact using the soap axis adapter too, as he is. The screen shot showing the exception branch is basically what I have.
Regards,
Keith

I am not able to create a callable object of my web Dynpro application

Hi,
I have my Portal server installed with NW2004S and with other components as follows.
·WAS 7.0 SP9
·EP7.0 SP9
·CAF 7.0 SP9
·VC 7.0 SP9
But now my webdynpro application is not reflecting in web Dynpro Component(GP Interface) during the design time, when I am trying to create a callable object.
So please can you suggest what is the problem and how I will get it corrected.
Regards,
Paresh.

Hi Aliaksei,
I had created a complete CAF application which was working fine. Then the server got crashed and i lost everything.So then i again installed the server and upgraded it to SP7.But than i was not able to see my web dynpro application while creating callable object. So i created another instance in the server at the base level(SP4) and i was able to create callable object.
There is no problem in the webdynpro application.I have added runtime library referece to my project : sap.com/cafeugp~api and also implemented the Interface IGPWebDynproCO in my component.
So i dont know where i am going wrong while i am upgrading the server.
Regards,
Paresh.

AcroQTP addin not able to identify some PDF object

hi ,
Thanks for the AcroQtp Addin ,it works fine with most of the pdf form in a browser.
But i am not able to identify some XFA list box and edit box .
In my pdf form some objects are getting identifed and some are not
Please help me in this
Thanks,

hi ,
Thanks for the AcroQtp Addin ,it works fine with most of the pdf form in a browser.
But i am not able to identify some XFA list box and edit box .
In my pdf form some objects are getting identifed and some are not
Please help me in this
Thanks,

Why two different users from same login group not able to access the database object(stored procedure)?

I have SQL login group as "SC_NT\group_name" in server. There are multiple users using this login group to access database objects. User "A" can able to access db object(stored_procedure_1) from .net application. But when user "B"
tried to access same db object(stored_procedure_1), its showing like
Error: The EXECUTE permission was denied on the object 'stored_procedure_1', database 'test',schema 'dbo'.
Both the users are using windows authentication for access the objects. Could you suggest me the way to resolve this?
Venkat

Thanks for your response
Erland Sommarskog....
my stored procedure "stored_procedure_1"
does not has any granted permissions to execute. But still user A
able to execute the sp from UI, where user B not able to do it. If any permission provided for a particular object, then only it will display in the above query whatever u have given.
Any other possibilities??
Venkat G

Not able to assign process server to file events.

Hi,
our requirement is we want a file event to be raised when ever a file is uploaded in BW.
when we tried to configured a file event we are not able to assign a process server. when we click on process server our bw process server is not popped up.
i am not clear what setting needs to be maintained in dataroot directory.
Process Server>>Parametes>>Data root directory
or
do we need to set up any platform agent on BW System
please advise.

Hi Anthon ,
1)Do we require seperate license for Platform agents and once after downloading the platform agent can we install from CPS side by submitting job definition or this is a BASIS job to install the platform agent on the system where we want the files to be detected.
2)is there any setting needs to be done on CPS side after we intall Platform Agents in the bw system.
Regards
Rajesh Dhaval

About Container Category in Integration Process (BPM)

Hi Friends
Can any one explain me abut Process container variable ReceiverList which is defined as a type "Receiver"
and How to use in Integration Process With Examples
Message was edited by:
Viswanadh Vadde

Hi Vishwanadh,
The Receiver type container variable is used to determine the receiver in the send step.
The Simple type container variable are xsd data type variable which may be xsd:string / xsd:integer / xsd:date / xsd:time. These variables are used as process control elements such as counters in the IP.
Regards
Santhosh
Remember to set the thread to solved when you have received a solution

Not able to call Webdynpro BPM application from Portal 7.2

Dear Expert,
My Portal has suddenly giving me a very strange error. When i am trying to click on a link in portal which is supposed to call a BPM application where the UI is designed in Webdynpro for Java, i am getting an error saying - Website can not display page.
The error is coming since the re-start of Portal server. Ours is federated portal scenario, the CE is producer and EP is consumer Portal.

After analyzing the issue i understood that the Federation is not working..
thanks.

The updates for imovie and iphoto are not able to be processed although i am logged in on my account.When i click on the respective updates ,it says please login

Updates not taking place only for these two apps

if you want to add songs they must be checked, put them in asong list as it makes them easier to manage

Not Able to Install Business Content Objects

Dear all:
We have installed BW 7.0 Dev environment in our server. Now we are trying to install BI content into BW. But when we moved to "Business Content",we only see several catalogs like technical content, BEx Personalization, BI Trace Tool, instead of standard Business Content for different business scenario. Is there anything else we should import into our new-installed BW 7.0?
Thank you very much
BR
S.F

Hi Sf,
I'd go Support Packages and Patches> SAP NetWeaver> SAP NETWEAVER> SAP NETWEAVER 2004S> BI Content for SAP NetWeaver> BI CONT 7.03
Let us know your progress.
Cheers,
Sarah

Integration process in File to BPM Scenario

hi,
gud morning. i got a problem while designing a BPM. in designing the integration process in IR, i am not able to get both the abstract interfaces to select from, while defining the container. plz post a solution for this. thank u.

Hi,
In this blog, I have used Business <b>Service</b> created in the integration directory.. This is an abstract . So I need to specify , the Sender and Receiver Interfaces explicitly in the business service. and it doesnot have any entry in the SLD.
But if you create the Business System in the SLD and if you import that into the Integration Directory-->Assign this into your configurations scenario, then this step is not required.
Regd. Importing Integration Process- BPM is kind of Abstract Service.. i.e BPM is acting as a Receiver Service and Sender service both..
i,e Source to BPM ( here BPM is a Receiver)
BPM to Target( here BPM is a Sender Service)
Hope this clarifies..
Regards,
Moorthy

Not able to integration process(BPM) objects in ID

Similar Messages

Maybe you are looking for