Not able to Load Module IdcApacheAuth in oracle ucm 10g

Hi I'm refering the link https://community.oracle.com/thread/2413591.
I'm facing exactly same problem on windows 7. Do i have to apply the same patch. Could you please provide me patch link for windows operating system. The patch you have provided in the above thread is for linux.
Regards,
Tejal

I tried IdcApacheauth22.dll and also Idc Apacheauth2.dll and Idcapacheauth.dll
My OS is windows 7 64 bit. I first tried Apache HTTP server for 64 bit and I kept getting message that unable to load the module. So i changed the HTTP server and used 32 bit server. Now I'm getting the procedure not found.
see the error message below for 32 bit Apache HTTP Server
C:/Apache32/conf/httpd.conf: Cannot load C:/OracleUCM10gInstall/server/shared/os/win32/lib/IdcApache22Auth.dll into server: The specified procedure could not be found
C:/Apache32/conf/httpd.conf: Cannot load C:/OracleUCM10gInstall/server/shared/os/win32/lib/IdcApache2Auth.dll into server: The specified module could not be found.
error message for 64 bit apache HTTP server
Testing httpd.conf....
Errors reported here must be corrected before the service can be started.
httpd: Syntax error on line 530 of C:/Apache64/conf/httpd.conf: Cannot load C:/OracleUCM10gInstall/server/shared/os/win32/lib/IdcApache22Auth.dll into server: %1 is not a valid Win32 application.
C:\Apache64\bin>

Similar Messages

  • Urgent : i am not able to coonect the report through oracle forms  10g

    i created a report "test1" through oracle report 10g and calling from oracle forms 10g
    i tried to run the report from forms builder but i am getting the following error
    "server can not connect 41213 error"
    from run mode i already given the following command for running the report server
    rwserver server=rep_fsprod
    The help is saying like that
    cause:  There is a problem connecting to the specified Report server. Action:  Check the Report server and make sure it is up and running. Level:  20
    Any pleae provide me the necessor setting for this issue and give me some good reselution
    But i am not sure where is the problem
    If anybody thats will be helpfull for me. please provide the step that i need to take
    the following are the code
    ------------------------------------------------------------>
    Declare
         PL_Id     ParamList;
    v_Report VarChar2(30) := 'TEST1';
    v_Rep_Id Report_Object;
    v_Rep_Job_Id VarChar2(100);
    v_Job_Id VarChar2(100);
    v_Rep_Status VarChar2(100);
    v_Rep_URL VarChar2(1000);
    v_Host_Name VarChar2(100) := 'localhost';
    v_Port     VarChar2(100) := '8889';
    v_Rep_Server VarChar2(100) := 'abc';
    Begin
    PL_Id := Get_Parameter_List(v_Report);
    If Not Id_Null(Pl_Id) Then
    Destroy_Parameter_List(Pl_Id);
    End If;
    Pl_Id:=Create_Parameter_List(v_Report);
    Add_Parameter(PL_Id, 'Usr_Id', Text_Parameter, 'cms');
    Add_Parameter(Pl_Id, 'ParamForm', Text_Parameter, 'NO');
    --Find Report Object
    v_Rep_Id := Find_Report_Object('TEST1');
    --Communication Mode
    Set_Report_Object_Property(v_Rep_Id, Report_Comm_Mode, Synchronous);
    Set_Report_Object_Property(v_Rep_Id, Report_Desformat, 'HTML');
    --Handled Destination Type and Name
         Set_Report_Object_Property(v_Rep_Id, Report_DesType, CACHE);
    --Specify Report Server and Report File Name
    Set_Report_Object_Property(v_Rep_Id, Report_Server, v_Rep_Server);
    Set_Report_Object_Property(v_Rep_Id, Report_FileName, v_Report);
    --Run Report
    v_Rep_Job_Id := Run_Report_Object(v_Rep_Id, PL_Id);
    v_Rep_Status := Report_Object_Status(v_Rep_Job_Id);
    If v_Rep_Status = 'FINISHED' Then
              v_Job_Id := SubStr(v_Rep_Job_Id, length(v_Rep_Server)+2);
              v_Rep_URL := 'http://' || v_Host_Name || ':' || v_Port || '/reports/rwservlet/getjobid' || v_Job_Id || '?server=' || v_Rep_Server;
    Message(v_Rep_URL);
                   Web.Show_Document(v_Rep_URL, '_blank');
    Else
         Message('Error Running Report');
    End If;
    End;
    ------------------------------------------------------------>

    i am facing same please do some favour me for this report issue

  • I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps.  I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?

    I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps.  I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?

    Set it up as new device, explained in this article, without using the backup afterwards:
    How to back up your data and set up as a new device

  • Not able to load master data

    HI Friends,
    I am not able to load data in master data even after deleting the master data. when i am schedule then the data is not even load in PSA , I am using the SRM as source system,
    The SRM is refreshed every quater so we need to re load the data from that system.
    Can you please suggest how to go about as it is very urgent ,
    I have checked that the connection is working fine but there is one short dump that is coming
    this is information that st22 is provding
    The termination occurred in the ABAP program "SAPLRSS1 " in                   
    "RSM1_CHECK_FOR_DELTAUPD".                                                   
    The main program was "RSPROCESS ".                                                                               
    The termination occurred in line 1361 of the source code of the (Include)     
    program "LRSS1F11 "                                                          
    of the source code of program "LRSS1F11 " (when calling the editor 13610).    
    The program "SAPLRSS1 " was started as a background job.                      
    Thanks
    Raju

    Hi Raju,
    Very strange to see your dump mesg when you are doing full load.
    Are you sure this dump is realted to your load.
    Check if your transfer structure is active or try doing following steps:
    1. Kill all the jobs runing in BW system.
    2. Delete all the data in all the realted data targets and infoobjects.
    3. Then try uploading data one by one.
    Ans why dont your try uploading data first only to PSA.
    Regards,
    Rohini

  • Hi i am not able to load any google sites ie gmail,orkut,youtube(login),,etc

    hi i am not able to load any google sites ie gmail,orkut,youtube(login),,etc
    when i tryied to open sites like www.gmail.com i got error msg as:
    The connection was interrupted
    The connection to www.google.com was interrupted while the page was loading.
    * The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    * If you are unable to load any pages, check your computer's network
    connection.
    * If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    i am currently using firefox 3.6.10 so what to do to fix this pblm?

    Make sure that your security software (firewall) isn't blocking or interrupting that connection.
    Do a malware check with a few malware scan programs.<br />
    You need to use all programs because each detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.<br />
    <br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

  • My ipod is not able to load my contacts when i select it

    my ipod is not able to load my contacts when i select it. Can u help me please??

    From which computer app (name and version)  are you trying to load (really sync) the contacts?
    What computer OS and version are you using?
    What iOS version?

  • Not able to connect to CRMOD through Oracle Peoplesoft environment.

    We are setting up integration of CRMOD with our internal Peoplesoft Finance application using web services from CRMOD. We are not able to connect to CRMOD through Oracle Peoplesoft integration broker. Pl assist. Peoplesoft development environment is in company LAN.

    If you are using SSO to access CRM On Demand, It will be best to raise an SR with Oracle so they can assist you with your technical difficulties.

  • Iphoto is not able to load my pictures

    Hello I have a problem while running iphoto. The program is not able to load my pictures it gets stock searching for pictures and does not displays a single image, none of the commands respond
    Can you give an advice.
    How can I reinstall this program.
    as you can see I'm not an apple expert yet.
    ilamp   Mac OS X (10.3.9)  

    Oh dear!
    Well I would start by deleting iPhoto and it's files. Do not touch the iPhoto Library folder found in the Pictures folder.
    To reinstall iPhoto...
    Navigate to /Applications and drag iPhoto to the trash
    Navigate to /Library/Receipts and drag all iPhoto receipts to the trash
    Navigate to ~/Library/Preferences and drag com.apple.iPhoto.plist to the trash.
    Look at this link and see what info pertains to you to reinstall iPhoto from your computer discs.
    How to restore your Apple software
    Mac OS X 10.4: Restoring applications from a Mac OS X 10.2 Software Restore disc
    Look all the way down the page for a downloadable version of Software restore to use in Tiger that works with your OS 10.2 computer specific software.
    Install iPhoto.
    Run Software Update and update iPhoto.
    Hopefull you will be able to open your iPhoto Library.
    Lori

  • Camera Raw not able to load lense correction profiles

    Hi there,
    like the topic says.. I am not able to load lense correction profiles and get always the error message. I have the newest version (Creative Cloud Member) of Photoshop CC 2014 15.2.2 and my Mac OSX is up to date. With older versions (when I start from a backup it is working fine!? So what can I do?! I dont want to run PS from my backup folder.. it hast to work with the actual release as well. I did not change anything.. already tried with uninstalling and reinstalling PS. But it didn´t solve the problem.

    Possibly a reset to both Bridge and Camera Raw is in order. First, close Bridge. Now hold Cmd+Opt+Shift as you restart it. A box will appear; Place a check mark on all three options and hit "ok." Now, again, Cmd+Opt+Shift as you "open in Camera Raw."
    See is this helps.
    Benjamin

  • PLEASE HELP:not able to load a simple servlet

    Hi,
    I'm new to weblogic server.I'm trying to setup weblogic 510.Everything was
    going fine until I got stuck to this small thing.I'm not able to load a
    simple servlet!.
    I would appreciate any pointers regarding this.Please Help me!!!
    Here is what I tried:
    I have installed weblogic510 plug-in for IIS.I could successfully run jsp
    files.However I am not able to load simple servlets;It gave an exception
    "java.lang.IllegalAccessError: try to access class
    weblogic/utils/classloaders/FileSource from class
    weblogic/servlet/internal/WarClassFinder"
    Details of my configuration:
    WebServer - IIS 4.0
    IIS port=80
    Weblogic port=7001
    I had set it in such a way that all the requests first go to IIS and then
    IIS redirects them to Weblogic.I've followed the steps according to the
    document "Installing the Weblogic ISAPI Plug-in".
    I've registered the servlet in weblogic.properties as following:
    weblogic.httpd.register.hello=examples.servlets.HelloWorld2
    I tested the servlet by URL http://localhost:7001/hello
    Following is the eact text for the exception I got in the WeblogicServer
    window:
    Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Error loading
    servlet:
    examples.servlets.HelloWorld2
    java.lang.IllegalAccessError: try to access class
    weblogic/utils/classloaders/Fi
    leSource from class weblogic/servlet/internal/WarClassFinder
    at
    weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.jav
    a, Compiled Code)
    at
    weblogic.servlet.internal.WarClassFinder.getClassSource(WarClassFinde
    r.java:110)
    at
    weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
    ClassLoader.java:381)
    at
    weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
    cClassLoader.java, Compiled Code)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Slave.
    loadClass(RecursiveReloadOnModifyClassLoader.java:234)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:146)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.findLo
    calClass(RecursiveReloadOnModifyClassLoader.java:109)
    at
    weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
    cClassLoader.java, Compiled Code)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:172)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:146)
    at
    weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
    mpl.java:291)
    at
    weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
    java:164)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:99)
    at
    weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
    textImpl.java:742)
    at
    weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
    textImpl.java:686)
    at
    weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
    ContextManager.java:247)
    at
    weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
    a:361)
    at
    weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
    Code)
    Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Servlet failed
    with Ex
    ception
    I dont think there were any problems in the classpath or
    servletpath;Basically WeblogicServer was able to locate the servlet but when
    it tried to load the servlet it gave this exception.
    I would appreciate any ideas/suggestions.
    Thanks,
    Sravan

    Nice to hear it works!
    However, one mistake you have in the configuration you provided:
    You put D:\weblogic\BDL\servletclasses in both CLASSPATH and
    weblogic.class.path, remove it from CLASSPATH.
    Cheers - Wei
    Sravan Thella <[email protected]> wrote in message
    news:[email protected]...
    Hi Michael and Wei,
    Thank you very much for the response.
    My servlet details:
    Name - HelloWorld2.class
    package - examples.servlets
    Location - d:\weblogic\BDL\servletclasses ---- here BDL is my new folder
    where I want to keep my servlets
    My CLASSPATH(environment) settings:
    D:\weblogic\BDL\servletclasses;d:\weblogic\classes\boot;d:\weblogic\eval\clo
    >
    udscape\lib\cloudscape.jar;d:\weblogic\lib\poolorb.jar;D:\java\jre\lib\rt.ja
    r;
    my weblogic classpath settings(set it thru wlconfig)
    D:\weblogic\BDL\servletclasses;d:\weblogic\classes\boot;d:\weblogic\eval\clo
    >
    udscape\lib\cloudscape.jar;d:\weblogic\lib\poolorb.jar;D:\java\jre\lib\rt.ja
    r;
    My weblogic.policy:
    grant codeBase "file:d:/weblogic/-" {
    permission java.io.FilePermission "d:${/}weblogic${/}-",
    "read,write,delete,execute";
    permission java.net.SocketPermission "localhost:1-9000",
    "connect,accept,listen,resolve";
    permission java.awt.AWTPermission "accessClipboard";
    permission java.awt.AWTPermission "accessEventQueue";
    permission java.awt.AWTPermission "showWindowWithoutWarningBanner";
    permission java.io.SerializablePermission"enableSubclassImplementation";
    permission java.io.SerializablePermission "enableSubstitution";
    permission java.lang.RuntimePermission "accessClassInPackage.*";
    permission java.lang.RuntimePermission "accessDeclaredMembers.*";
    permission java.lang.RuntimePermission "createClassLoader";
    permission java.lang.RuntimePermission "createSecurityManager";
    permission java.lang.RuntimePermission "defineClassInPackage.*";
    permission java.lang.RuntimePermission "exitVM";
    permission java.lang.RuntimePermission "getClassLoader";
    permission java.lang.RuntimePermission "createClassLoader";
    permission java.lang.RuntimePermission "getProtectionDomain";
    permission java.lang.RuntimePermission "loadLibrary.*";
    permission java.lang.RuntimePermission "modifyThread";
    permission java.lang.RuntimePermission "modifyThreadGroup";
    permission java.lang.RuntimePermission "readFileDescriptor";
    permission java.lang.RuntimePermission "setContextClassLoader";
    permission java.lang.RuntimePermission "setFactory";
    permission java.lang.RuntimePermission "setIO";
    permission java.lang.RuntimePermission "setProtectionDomain";
    permission java.lang.RuntimePermission "setSecurityManager";
    permission java.lang.RuntimePermission "writeFileDescriptor";
    permission java.lang.reflect.ReflectPermission "suppressAccessChecks";
    permission java.net.NetPermission "requestPasswordAuthentication";
    permission java.net.NetPermission "setDefaultAuthenticator";
    permission java.security.SecurityPermission "getPolicy";
    permission java.security.SecurityPermission "setPolicy";
    permission java.util.PropertyPermission "*", "read,write";
    grant codeBase "file:d:/weblogic/BDL/servletclasses/-" {
    permission java.io.FilePermission
    "d:${/}weblogic${/}BDL{/}servletclasses{/}-", "read,write,delete,execute";
    permission java.net.SocketPermission "localhost:1-9000",
    "connect,accept,listen,resolve";
    permission java.awt.AWTPermission "accessClipboard";
    permission java.awt.AWTPermission "accessEventQueue";
    permission java.awt.AWTPermission "showWindowWithoutWarningBanner";
    permission java.io.SerializablePermission"enableSubclassImplementation";
    permission java.io.SerializablePermission "enableSubstitution";
    permission java.lang.RuntimePermission "accessClassInPackage.*";
    permission java.lang.RuntimePermission "accessDeclaredMembers.*";
    permission java.lang.RuntimePermission "createClassLoader";
    permission java.lang.RuntimePermission "createSecurityManager";
    permission java.lang.RuntimePermission "defineClassInPackage.*";
    permission java.lang.RuntimePermission "exitVM";
    permission java.lang.RuntimePermission "getClassLoader";
    permission java.lang.RuntimePermission "createClassLoader";
    permission java.lang.RuntimePermission "getProtectionDomain";
    permission java.lang.RuntimePermission "loadLibrary.*";
    permission java.lang.RuntimePermission "modifyThread";
    permission java.lang.RuntimePermission "modifyThreadGroup";
    permission java.lang.RuntimePermission "readFileDescriptor";
    permission java.lang.RuntimePermission "setContextClassLoader";
    permission java.lang.RuntimePermission "setFactory";
    permission java.lang.RuntimePermission "setIO";
    permission java.lang.RuntimePermission "setProtectionDomain";
    permission java.lang.RuntimePermission "setSecurityManager";
    permission java.lang.RuntimePermission "writeFileDescriptor";
    permission java.lang.reflect.ReflectPermission "suppressAccessChecks";
    permission java.net.NetPermission "requestPasswordAuthentication";
    permission java.net.NetPermission "setDefaultAuthenticator";
    permission java.security.SecurityPermission "getPolicy";
    permission java.security.SecurityPermission "setPolicy";
    permission java.util.PropertyPermission "*", "read,write";
    I dont know what is wrong here. In the weblogic.policy file,I tried
    differrent combinations but it never worked.
    I find weblogic documentation for troubleshooting to be pathetic.Notuseful
    at all.Documentation looks
    good to read ;not for practical purposes.I'm not sure whether others have
    similar opinion.
    I'm stuck at this thing for the past few days,I still have lot of work todo
    to purusue our management team to buy weblogic
    but I'm still stuck at this thing.
    Thank you very much for your time.
    Thanks,
    Sravan
    "Sravan Thella" <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    I'm new to weblogic server.I'm trying to setup weblogic 510.Everything
    was
    going fine until I got stuck to this small thing.I'm not able to load a
    simple servlet!.
    I would appreciate any pointers regarding this.Please Help me!!!
    Here is what I tried:
    I have installed weblogic510 plug-in for IIS.I could successfully runjsp
    files.However I am not able to load simple servlets;It gave an exception
    "java.lang.IllegalAccessError: try to access class
    weblogic/utils/classloaders/FileSource from class
    weblogic/servlet/internal/WarClassFinder"
    Details of my configuration:
    WebServer - IIS 4.0
    IIS port=80
    Weblogic port=7001
    I had set it in such a way that all the requests first go to IIS andthen
    IIS redirects them to Weblogic.I've followed the steps according to the
    document "Installing the Weblogic ISAPI Plug-in".
    I've registered the servlet in weblogic.properties as following:
    weblogic.httpd.register.hello=examples.servlets.HelloWorld2
    I tested the servlet by URL http://localhost:7001/hello
    Following is the eact text for the exception I got in the WeblogicServer
    window:
    Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Error loading
    servlet:
    examples.servlets.HelloWorld2
    java.lang.IllegalAccessError: try to access class
    weblogic/utils/classloaders/Fi
    leSource from class weblogic/servlet/internal/WarClassFinder
    at
    weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.jav
    a, Compiled Code)
    at
    weblogic.servlet.internal.WarClassFinder.getClassSource(WarClassFinde
    r.java:110)
    at
    weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
    ClassLoader.java:381)
    at
    weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
    cClassLoader.java, Compiled Code)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Slave.
    loadClass(RecursiveReloadOnModifyClassLoader.java:234)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:146)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.findLo
    calClass(RecursiveReloadOnModifyClassLoader.java:109)
    at
    weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
    cClassLoader.java, Compiled Code)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:172)
    at
    weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
    Loader.java:146)
    at
    weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
    mpl.java:291)
    at
    weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
    java:164)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:99)
    at
    weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
    textImpl.java:742)
    at
    weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
    textImpl.java:686)
    at
    weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
    ContextManager.java:247)
    at
    weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
    a:361)
    at
    weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java,Compiled
    Code)
    Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Servlet failed
    with Ex
    ception
    I dont think there were any problems in the classpath or
    servletpath;Basically WeblogicServer was able to locate the servlet butwhen
    it tried to load the servlet it gave this exception.
    I would appreciate any ideas/suggestions.
    Thanks,
    Sravan

  • ATG CIM: Not able to connect to database jdbc:oracle:thin

    Hi All,
    I am trying to setup a ATG environment on windows boxes. Below is the setup:
    VM1) DC - Windows Domain Controller (Windows Server 2008)
    VM2) javadb - Oracle 11g (Windows Server 2008)
    VM3) javaweb - ATG 10.0.3 / WebLogic wlserver_10.3/ TomCat 7 (Windows Server 2008)
    Installation / Setup Progress
    * Oracle 11g installation successful. Sample DB successfully created.
    * WebLogic installation successful. Base_Domain successfully created.
    * Able to create successful connection to Oracle (javadb vm) from TomCat (javaweb vm) and query data
    Error: When configuring CIM I keep on getting >> "Not able to connect to database jdbc:oracle:thin:@javadb:1521:SampleDB @ scott"+_
    Corrective action already taken:
    1) Disabled firewall on all boxes
    2) Added path of JDBC driver (ojdbc6.jar) in Environment Variables
    3) Tested Oracle 11g (javadb vm) connectivity both from Eclipse and Tomcat. Which is successful
    4) Cleared all files under C:\ATG\ATG10.0.3\CIM\data to reset CIM
    Please refer CIM details below:
    ===========================================
    CIM DISPLAY START
    ===========================================
    -------ENTER CONNECTION DETAILS-----------------------------------------------
    enter [h]elp, [m]ain menu, [q]uit to exit
    Production Core
    Select Database Type
    *[1] Oracle Thin
    [2] MS SQL
    [3] iNet MS SQL
    [4] DB2
    [5] My SQL
    Select one > 1
    Enter User Name [[system]] > scott
    Enter Password [[**********]] > **********
    Re-enter Password > **********
    Enter Host Name [[javadb]] > javadb
    Enter Port Number [[1521]] > 1521
    Enter Database Name [[sampledb]] > SampleDB
    Enter Database URL [[jdbc:oracle:thin:@javadb:1521:SampleDB]]
    >
    Enter Driver Path [[C:/Oracle/Middleware/wlserver_10.3/server/lib/ojdbc6.jar]]
    Enter JNDI Name [[ATGProductionDS]] >
    -------CONFIGURE DATASOURCE PRODUCTION CORE-----------------------------------
    enter [h]elp, [m]ain menu, [q]uit to exit
    [C] Connection Details - Done
    *[T] Test Connection
    [S] Create Schema
    Import Initial Data
    [D] Drop Schema
    [O] Configure Another Datasource
    > T
    -------TEST DATASOURCE CONNECTION---------------------------------------------
    enter [h]elp, [m]ain menu, [q]uit to exit
    Production Core
    >> Not able to connect to database jdbc:oracle:thin:@javadb:1521:SampleDB @ scott
    ===========================================
    CIM DISPLAY END
    ===========================================
    ===========================================
    CIM LOG START
    ===========================================
    **** Warning     Mon Jul 23 22:46:25 IST 2012     1343063785645     atg.cim.worker.status.StatusUpdateValidator     Status id nonswitchingCore-DatasourceConnectionTemplateStep is unknown.
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator     Not able to connect to database jdbc:oracle:thin:@javadb:1521:SampleDB : -1     java.lang.ArrayIndexOutOfBoundsException: -1
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at oracle.jdbc.driver.T4CTTIoauthenticate.setSessionFields(T4CTTIoauthenticate.java:948)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at oracle.jdbc.driver.T4CTTIoauthenticate.<init>(T4CTTIoauthenticate.java:225)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:358)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:538)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at java.sql.DriverManager.getConnection(DriverManager.java:582)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at java.sql.DriverManager.getConnection(DriverManager.java:185)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.service.jdbc.BasicDataSource.getDriverManagerConnection(BasicDataSource.java:526)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.service.jdbc.BasicDataSource.getDriverManagerConnection(BasicDataSource.java:588)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.service.jdbc.BasicDataSource.getConnection(BasicDataSource.java:475)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.service.jdbc.FakeXADataSource.getXAConnection(FakeXADataSource.java:671)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.service.jdbc.MonitoredDataSource.createResource(MonitoredDataSource.java:837)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.service.resourcepool.ResourcePool.populateSlot(ResourcePool.java:2064)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.service.resourcepool.ResourcePool.checkOut(ResourcePool.java:1332)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.service.jdbc.MonitoredDataSource.co(MonitoredDataSource.java:1792)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.service.jdbc.MonitoredDataSource.getConnection(MonitoredDataSource.java:1070)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.worker.databaseconfig.TestJdbcConnectionValidator.performTestConnection(TestJdbcConnectionValidator.java:319)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.worker.databaseconfig.TestJdbcConnectionValidator.validate(TestJdbcConnectionValidator.java:266)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.step.StepExecutor.executeValidations(StepExecutor.java:280)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.ui.text.TextDisplay.processStep(TextDisplay.java:338)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.ui.UIDispatchImpl.processStep(UIDispatchImpl.java:89)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.step.StepExecutor.processStep(StepExecutor.java:201)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.step.StepExecutor.processCurrentStep(StepExecutor.java:80)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.runner.Runner.run(Runner.java:152)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.command.types.LaunchTemplate.execute(LaunchTemplate.java:69)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.command.CommandExecutor.execute(CommandExecutor.java:128)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.command.CommandExecutor.executeCommands(CommandExecutor.java:156)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.step.StepExecutor.processStep(StepExecutor.java:129)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.step.StepExecutor.processCurrentStep(StepExecutor.java:80)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.runner.Runner.run(Runner.java:152)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.command.types.LaunchTemplate.execute(LaunchTemplate.java:69)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.command.CommandExecutor.execute(CommandExecutor.java:128)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.command.CommandExecutor.executeCommands(CommandExecutor.java:156)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.step.StepExecutor.processStep(StepExecutor.java:129)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.step.StepExecutor.processCurrentStep(StepExecutor.java:80)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.runner.Runner.run(Runner.java:152)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.command.types.LaunchTemplate.execute(LaunchTemplate.java:69)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.command.CommandExecutor.execute(CommandExecutor.java:128)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.command.CommandExecutor.executeCommands(CommandExecutor.java:156)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.step.StepExecutor.processStep(StepExecutor.java:129)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.step.StepExecutor.processCurrentStep(StepExecutor.java:80)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.runner.Runner.run(Runner.java:152)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.command.types.LaunchWizard.execute(LaunchWizard.java:73)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.command.CommandExecutor.execute(CommandExecutor.java:128)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.command.CommandExecutor.executeCommands(CommandExecutor.java:156)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.step.StepExecutor.processStep(StepExecutor.java:216)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.step.StepExecutor.processCurrentStep(StepExecutor.java:80)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.runner.Runner.run(Runner.java:152)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.flow.CimFlow.startupFlow(CimFlow.java:69)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.flow.CimFlowCreator.startDefaultCimFlow(CimFlowCreator.java:78)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.Launcher.startCimFlow(Launcher.java:168)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator          at atg.cim.Launcher.main(Launcher.java:68)
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792213     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator     
    **** Error     Mon Jul 23 22:46:32 IST 2012     1343063792218     atg.cim.worker.databaseconfig.TestJdbcConnectionValidator     Error initializing connection from parameters. Test for jdbc connection failed
    ===========================================
    CIM LOG END
    ===========================================
    Any suggestion how to resolve this issue. Thanks in advance.
    cheers,
    Sandeep
    Edited by: 948180 on Jul 23, 2012 11:29 PM

    Hi,
    Earlier my ojdbc6.jar path was not at the beginning of ClassPath. I have made necessary changes. Please refer below:
    Environment Variables Settings on machine where CIM resides:
    PATH = C:\Oracle\Middleware\wlserver_10.3\server\lib\ojdbc6.jar+;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files\Java\jre7\bin;C:\Program Files\Apache Software Foundation\Tomcat 7.0\bin;C:\Program Files\cvsnt;C:\Program Files\Java\jdk1.7.0\bin;C:\Program Files\Sun\JavaDB\bin;C:\Program Files\Sun\JavaDB\lib;;C:\ATG\ATG10.0.3\MySQL\win32\bin;C:\ATG\ATG10.0.3\home\bin\;C:\Oracle\Middleware\wlserver_10.3\server\lib\;
    Note: I have verified by ojdbc6.jar path.
    Below are the precise steps I executed after updating my environment variables and restarting CMD.
    ===========================================
    CIM DISPLAY START
    ===========================================
    C:\ATG\ATG10.0.3\home\bin>cim.bat
    Nucleus running
    _ | () |
    __ _ | |_ __ _ ----
    / _` | | __| / _` |
    | (_| | | |_ | (_| |
    \__,_| \__| \__, |
    |___/
    Configuration Installation Manager
    =======CIM MAIN MENU============================================================
    enter [h]elp, [q]uit to exit
    Choose the task you want to perform:
    *[1] Database Configuration
    [2] Server Instance Configuration
    [3] Application Assembly & Deployment
    [P] Product Selection - Done (ATG B2C Commerce)
    [A] Select Application Server - Done (Weblogic Online)
    [C] Custom CIM Plugin Launcher
    > 1
    -------CALCULATE DATASOURCE DEPENDENCIES----------------------------------------
    enter [h]elp, [m]ain menu, [q]uit to exit
    Calculating Datasource Dependencies. View log file at C:/ATG/ATG10.0.3/home/
    ../CIM/log/cim.log
    |. . |
    |. . |
    -------SELECT A DATASOURCE TO CONFIGURE-----------------------------------------
    enter [h]elp, [m]ain menu, [q]uit to exit
    *[P] Publishing
    [C] Production Core
    [D] Done
    > c
    -------CONFIGURE DATASOURCE PRODUCTION CORE-------------------------------------
    enter [h]elp, [m]ain menu, [q]uit to exit
    [C] Connection Details - Done
    *[T] Test Connection
    [S] Create Schema
    Import Initial Data
    [D] Drop Schema
    [O] Configure Another Datasource
    > t
    -------TEST DATASOURCE CONNECTION-----------------------------------------------
    enter [h]elp, [m]ain menu, [q]uit to exit
    Production Core
    >> Not able to connect to database jdbc:oracle:thin:@javadb:1521:SampleDB @
    scott
    *[E] Edit Connection Details
    [R] Redo
    [D] Done
    > e
    -------RE-USE VALUES FROM PREVIOUS DATASOURCE-----------------------------------
    enter [h]elp, [m]ain menu, [q]uit to exit
    Production Core
    Base on previous database details:
    [1] system@jdbc:oracle:thin:@javadb:1521:sampledb
    [2] scott@jdbc:oracle:thin:@javadb:1521:SampleDB
    *[3] None/Use Existing
    Select one > 2
    -------ENTER CONNECTION DETAILS-------------------------------------------------
    enter [h]elp, [m]ain menu, [q]uit to exit
    Production Core
    Select Database Type
    *[1] Oracle Thin
    [2] MS SQL
    [3] iNet MS SQL
    [4] DB2
    [5] My SQL
    Select one > 1
    Enter User Name [[scott]] > scott
    Enter Password [[**********]] > **********
    Re-enter Password > **********
    Enter Host Name [[javadb]] > javadb
    Enter Port Number [[1521]] > 1521
    Enter Database Name [[SampleDB]] > SampleDB
    Enter Database URL [[jdbc:oracle:thin:@javadb:1521:SampleDB]]
    > jdbc:oracle:thin:@javadb:1521:SampleDB
    Enter Driver Path [[C:/Oracle/Middleware/wlserver_10.3/server/lib/ojdbc6.jar]
    ] > C:\Oracle\Middleware\wlserver_10.3\server\lib\ojdbc6.jar
    Enter JNDI Name [[ATGProductionDS]] > ATGProductionDS
    -------CONFIGURE DATASOURCE PRODUCTION CORE-------------------------------------
    enter [h]elp, [m]ain menu, [q]uit to exit
    [C] Connection Details - Done
    *[T] Test Connection
    [S] Create Schema
    [I] Import Initial Data
    [D] Drop Schema
    [O] Configure Another Datasource
    > T
    -------TEST DATASOURCE CONNECTION-----------------------------------------------
    enter [h]elp, [m]ain menu, [q]uit to exit
    Production Core
    >> Not able to connect to database jdbc:oracle:thin:@javadb:1521:SampleDB @
    scott
    *[E] Edit Connection Details
    [R] Redo
    [D] Done
    >
    ===========================================
    CIM DISPLAY END
    ===========================================
    Don't understand what could possibly be going wrong.
    Cheers,
    Sandeep
    Edited by: 948180 on Jul 24, 2012 12:23 AM

  • I have a sony handy cam dcr-sr85 that is not able to load to iMovie

    I have a sony handy cam dcr-sr85 that is not able to load to iMovie .Does anyone have any ideas .I think maybe  I need to download  a driver but I'm not sure . A free one would be nice. Thanks Steve

    Is it listed here as supported?
    iMovie 11 - cameras supported:
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    iMovie 9 - cameras supported:
    http://support.apple.com/kb/HT3290?viewlocale=en_US
    iMovie 8 Camcorders supported:
    http://support.apple.com/kb/HT1014
    Digital camera RAW formats supported by OS X Lion:
    http://support.apple.com/kb/HT4757?viewlocale=en_US
    Digital camera RAW formats supported by OS X Snow Leopard:
    http://support.apple.com/kb/HT3825?viewlocale=en_US
    Are you connecting by firewire?

  • Not able to deploy axis2 web service on oc4j 10g server

    Not able to deploy axis2 web service on oc4j 10g server, getting internal server every time I click on services link....
    Edited by: 974237 on Nov 30, 2012 4:17 AM

    Not able to deploy axis2 web service on oc4j 10g server, getting internal server every time I click on services link....
    Edited by: 974237 on Nov 30, 2012 4:17 AM

  • Not able to connect to database using Oracle ODBC Driver

    Hi,
    I have installed Oracle client on a system. there are 2 homes installed. When I check the ODBC administrator, I see that only one ODBC driver is present. There are Net 8 services configured in both the homes.
    When I try to connect to a database with the services configured in the second home using the ODBC driver, I am getting an error that the TNS name could not be resolved.
    How can I use the ODBC driver to connect to the databases using services defined in the second home?
    The name of the ODBC driver is 'Oracle in <firsthomename>
    Thanks & Regards

    Hi,
    Thanks for the help.
    I tried this, but it doesn't work. I'm still getting the error.
    Now I am not able to create a DSN when I set the ORACLE_PATH to the second home. It says 'the setup routines for the Oracle in ora1 ODBC Driver could not be loaded due to system error code 998.'
    Any other solution?
    Thanks in advance & Regards
    Anuja

  • R12 not able to load supplier contact

    Hi
    Instance : R12.1.3, Not able to upload the supplier contact details. using the conc program "Supplier Site Contacts Open Interface Import"
    the conc program is publishing the report with "no data found" when the conc program is completed normal.
    observation
    the table AP_SUP_SITE_CONTACT_INT is having null value for the column - REJECT_CODE
    inserted the data for following columns
    last_name, org_id, vendor_id, vendor_site_id,vendor_contact_interface_id,area_Code, phone number
    using the below
    INSERT INTO ap_sup_site_contact_int
    (vendor_site_id, vendor_site_code, -- One or the other is required
    org_id, operating_unit_name, -- One or the other is required
    first_name, last_name, prefix, title, mail_stop, area_code,
    phone, department, status, email_address, url, alt_area_code,
    alt_phone, fax_area_code, fax, vendor_id, vendor_contact_interface_id)
    VALUES (<Vendor_Site_ID>, NULL,
    <Org_ID>, NULL,
    '<Firstname>', '<Lastname>', NULL, NULL, NULL, '999',
    '999-9999', NULL, 'NEW', NULL, NULL, NULL,
    NULL, NULL, NULL, <Vendor_ID>, AP_SUP_SITE_CONTACT_INT_S.NextVal)
    Pls advice
    Regards
    Yram

    Hello,
    What error did you get when loading Page assets in a Recommendation asset?
    What is your WebCenter Sites version? If you are using 11.1.1.6.x, maybe you are experiencing the issue documented in KM Note 1531160.1.

Maybe you are looking for

  • How do I rename a lot of files from an excel worksheet?

    Hello all! I have 2k+ files in a folder named sequentially from 0001.wav to 24xx.wav. I have their contents referenced in an .xls. This is a library made for Windows when it didn't accept very long names, so you couldn't just name the file accordingl

  • Use of DateFormat function influences headers

    Can someone confirm/deny this, I must be going crazy.... In the attached code, I set the content type to text/xml. But when I visit the page in a browser it is resturned as text/html.. The header looks like this: quote: HTTP/1.1 200 OK Connection: cl

  • Error creating RTP in version 11.

    This is the error that I am getting while creating a RTP in calculation manager in EPMA. Oracle EPM System Workspace - ErrorError :Error while executing query: 'insert into CALCMGRVARIABLES (ID, NAME, UPPERNAME, DESCRIPTION, OWNER, CREATED, MODIFIEDB

  • How 'usefull' will TLF be for Flash AS3 projects?

    The size that TLF will add to a flash project is really huge while it's missing some really standard (HTML) features like floating images and tables. So if those feauters will eventually be added (in v2?) the size will even increase more. A simple (n

  • Can't see XMLRef in serialized resource

    I use the query below to join the path view with the default table that stores the XML content. SELECT EXTRACTVALUE(value(n), '/note/from') FROM xdbnotes n , path_view p WHERE REF(n) = EXTRACTVALUE(p.res, '/Resource/XMLRef') AND p.path = '/public/xdb