Not able to locate the path of adgentopfile.sh

Hi All,
I am in the process of creating a customtop.
I got stuck in between because i need to run the adgentopfile.sh which i am not able to locate.
bash-3.00$ cd $INST_TOP/admin/install
bash-3.00$ cd /u01/oracle/ERPDEV/appldev/inst/apps/DEV_zanerpuat/admin/install/
bash-3.00$ ls -l adgentopfile.sh
adgentopfile.sh: No such file or directory
bash-3.00$
My application version is 12.1.1
Is there any other location where we can find the adgentopfile.sh path.
Thanks and Regards,
Danish

I have register the oracle user. when i try to register the oracle database user.
During that time, I am getting an error That password is wrong .What is the complete error message? What is the database user you are trying to connect as?
Do i need to create the user for custom top using sysdba or apps user.It does not matter as long as the user you are logged in has privileges to create a new schema.
When i try to connect using xxerp user, I am able to connect to the database.What is the error? Please create this user with a correct password and try then.
Thanks,
Hussein

Similar Messages

I have realised over time I have created multiple accounts. I have bought music on my iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone to help.

I have realised over time I have created multiple accounts. I have bought music on my Iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone in Itune to help me. PLEASE

I don't have the app adn no expereince with it, but it appears basec on teh app description you may need it installed on your MAC as well to download the files.
You might find help on the vendors website: http://www.nfinityinc.com/index.html

Not able to change the path to trusted keystore for connection to directory

Hi,
I am trying to make a secured connection to directory server through JNDI.
env.put(
Context.INITIAL_CONTEXT_FACTORY,
"com.sun.jndi.ldap.LdapCtxFactory"
if(isSSLEnabled){
env.put(
Context.PROVIDER_URL,
"ldap://" + host + ":" + securePort
else{
env.put(
Context.PROVIDER_URL,
"ldap://" + host + ":" + port
env.put(Context.SECURITY_AUTHENTICATION , "simple");
env.put(Context.SECURITY_PRINCIPAL , user);
env.put(Context.SECURITY_CREDENTIALS , password);
if(isSSLEnabled)
env.put(Context.SECURITY_PROTOCOL, "ssl");
System.setProperty ("javax.net.ssl.trustStore", fileLocation);
System.setProperty ("javax.net.ssl.trustStoreType", "jks");
try {
ctx = new InitialDirContext(env);
System.clearProperty ("javax.net.ssl.trustStore");
System.runFinalization();
retValue = BIND_OK;
System.clearProperty ("javax.net.ssl.trustStore");
The location to the keystore file is populated through a file browser.But the problem is that i am not able to clear System.setProperty ("javax.net.ssl.trustStore", fileLocation); (even through System.clearProperty)the location to trusted file. Everytime it takes the path to the first keystore and all other changes to the path are not reflected.
Does anyone knows the problem. Is it with JNDI or JVM?
Thanks in advance,
Sharat.

http://am.martinmarinov.info/ohapan.php?i=pilej
http://am.martinmarinov.info/ohapan.php?i=pilej
http://am.martinmarinov.info/ohapan.php?i=pilej

HP Laserjet p1102w blue WIRELESS light keeps blinking and computer is not able to locate the printer

Have been using the printer on wireless and it was working fine until I had to cancel a print and might have accidentally press wireless button and "X" cancel button together and havn't been able to print since.
Did everything:
- update firmware: LJP1100_P1560_P1600_FW_Update.dmg
- update printing software: HP-ePrint_v2.4.1.dmg
- Reinstall wireless setting
But the printer will now shot from Add new printer- Bonjour setting.
The odd thing is When I switch the wifi on computer on and off the printer will show in Add new printer- Bonjour setting, for a second and disappear again.
The printer still works via cable.
There were 3 machine using the printer via wireless now has all same issue.
Thank you for any help or tip!

Hello eeoorhee,
Welcome to the HP Forums.
I see that you are having an issue with connecting the printer over the wireless connection.
I have a few steps that we can take to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I also suggest that you do an uinstall of the software and drivers and reinstall. Please click on the link that I have added for when The Printer is Not Found During Wireless Installation.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

In the Packet not able to find the native method

I have native method callSucJava , This method when called from the java file independently (without it being part of the package ) works fine.
But when i copy the same class with the native method defined into the package and include the java file with the native method in the package , it gives the following error
java.lang.UnsatisfiedLinkError: callSucJava
Which means it is not able to locate the neative methos in the library . It is ofcourse able to find the library. But as this method is present in the library , and syntactically it is correct as it works fine when being run independently.
Any help would be appreciated.
thanks

In your old library there shoud be the function
JNIEXPORT void JNICALL
Java_callSucJava(JNIEnv *, jobject) {
You have to change it to:
JNIEXPORT void JNICALL
Java_your_package_callSucJava(JNIEnv *, jobject) {

File Monitoring - Not able to see File Path on the Detail Information Tab

Hi Experts:
I am setting up the "File Monitoring" in the Solution Manager. I am having STA/PI01L_CRM570 on the Solution Manager.
And on the Satelite System - ECC I have STA/PI 01L_ECC600
While I am setting up the parameters, I am supposed to provide the file path in "Detail Information" tab page.
But I am just able to see two tabs:
Count and Short Text (optional).
I checked all the other tab but not able to locate where I need to provide the file path.
Can any one let me know, If I am missing anything or do I need to do any further steps.
Similarly for the File Size setting:
I am not able to see where I can define The parameter "File Pattern (e.g. *.log, *.txt or any string)" is mandatory.
Pls let me know.
Regards
John

Hello Johns,
You can find the FilePath in the 'Detail Information' tab if you double click the initial and predefined counter 001.
Best regards,
Goncalo Mouro Vaz

FindClass() not able to find the class in the same path

Hi,
I have a c prototype which calls a java function which push a message in JMS. i'm using jdk1.6. i have set JavaVMInitArgs vm_args.version = JNI_VERSION_1_6 when i compile the c code as gcc -g -lgcj -I $JAVA_HOME/include -I $JAVA_HOME/include/linux CallJMS.c the JNI_CreateJavaVM(&jvm, (void*)&env, &vm_args)* returns JNI_ERR. After changing version to 1.4 JavaVMInitArgs vm_args.version = JNI_VERSION_1_4 finally it gives me an executable which calls the java function (how ever the required functionality is not got)
To get the required functionality i had to use jdk1.6 so i changed the version property to JNI_VERSION_1_6 and the compiling command as gcc -g CallJMS.c -I $JAVA_HOME/include -I $JAVA_HOME/include/linux -L $JAVA_HOME/jre/lib/i386/server -ljvm .This gave me an executable, but when i execute it is not able to find the java class file. I have kept both the java and c file in the same path and also set the CLASSPATH. Please help.

Hi jschell,
I got solution to this problem. As you said it is due to wrong CLASSPATH set .
Before:
JavaVMInitArgs vm_args;
JavaVMOption options[3];
options[0].optionString = "-Djava.class.path=.:/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes";
options[1].optionString="-Djava.library.path=.:/home/program/jdk1.6.0_23/jre/lib/i386/server";
options[2].optionString="-verbose:jni";
vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
vm_args.nOptions = 3;
vm_args.options = options;
vm_args.ignoreUnrecognized = 0;
int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if(ret < 0)
printf("\nUnable to Launch JVM\n");
else
printf("\nLaunched JVM\n");
I was setting the CLASSPATH to the Path where my java class files were kept. When the JVM instance is created only this path (where my java class is residing) is identified and the JMS and other paths which was already set in the CLASSPATH environment variable is lost. Thus when i call the java class from the c program it is not able to find the dependent class files and it was aborting.
After:
Before setting the path where my class files are residing to CLASSPATH, get the path's in the CLASSPATH to a variable, append the path where my class files are kept to this variable and then set the CLASSPATH . Similarly do for the LD_LIBRARY_PATH. This works fine.
char cpathBuff[100000];
char ldpathBuff[4096];
JNIEnv *env;
JavaVMInitArgs vm_args;
JavaVMOption options[3];
cpath = (char*) getenv("CLASSPATH");
sprintf(cpathBuff,"%s%s:%s","-Djava.class.path=",cpath,"/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes");
options[0].optionString = cpathBuff;
ldpath = (char *)getenv("LD_LIBRARY_PATH");
sprintf(ldpathBuff,"%s%s:%s","-Djava.library.path=",ldpath,"/home/program/jdk1.6.0_23/jre/lib/i386/server");
options[1].optionString = ldpathBuff;
vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
vm_args.nOptions = 2;
vm_args.options = options;
vm_args.ignoreUnrecognized = 0;
int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if(ret < 0)
printf("\nUnable to Launch JVM\n");
else
printf("\nLaunched JVM\n");
Thanks for your support Peter and JSchell.
Edited by: 844094 on Mar 15, 2011 2:37 AM

Am not able to run the java program - pls help

1. I installed java in the below path
     c:\program files\java\jdk1.5.0
     c:\program files\java\jre1.5.0
I set the path in
     User variable i. variable name: path
          ii. variable value: c:\program files\java\jdk1.5.0\bin
when I compile it in command prompt-applying javac ? it performed successfully-shows
options like ?g create all debug info, -g : new Generate no debug info etc.,
But am not able to run the file. It shows error msg.
2. I specified the same name for file name & class name.
3. Java <class name>
     Exception in thread ?main?java.lang.NoclassDeffoundError: <class name>
4. Java ?cp <class name>
     Unrecognized option: -cp.<classname>
     Could not create the Java Virtual Machine
5. Java ?classpath . <classname>
     Exception in thread ?main?.java.lang.unsupported classversionError: <classname>
     <unsupported major.minor version 49.0
          at java.lang.classloader.defineclass0<native method>
          at java.lang.classloader.defineclass<unknown source>
               --and many listed below?
6. Java ?classpath c:\program files\java\jdk1.5.0\bin <class name>
     Exception in thread ?main?java.lang.NoclassDeffoundError: <class name>
7. I re-installed the java, but still the problem continuing.
pls help... its very urgent

Is the java class you compiled/calling in the default package? If it is not, you will have to call it by the fully qualified name.
e.g.
package com.mycompany.myproject;
public class MyClass {
    public static void main(String[] args) { }
}This would be called as "Java com.mycompany.myproject.MyClass" and must contain a main method with signature as above.
You would have to call this from folder where the compiled classes are located. If using package, you would call from directory at level of top most package so com folder in this example as Java will look at each package name in qualified name and try to traverse directories with those same names to get to .class file matching class name specified. To avoid this, your newly compiled .class files must also be in your classpath.
Hopefully that helps.
--Kevin

SQL Developer is not able to identify the Tnsnames.ora file

Hi,
I have installed the following in the laptop having Win XP:
1) Oracle 10gR2 Client software in the D: drive of laptop. Tnsnames.ora is located in this clients Network\Admin path. This client is used to access the databases on the other servers.
2) Oracle 10gR2 Database software in the E: drive of laptop. Right now there is not Tnsnames.ora file in this softwares Network\Admin path. This db software has been installed to create local databases in the laptop.
3) Oracle SQL Developer Version 2.1.1.64 is also installed in C: drive of laptop.
The problem which now I'm facing is that the SQL Developer is not able to identify the Tnsnames.ora file mentioned in the above point-1 which contains entries of databases on the different servers. Could you please help me out in solving this problem?
Thanks in advance.
MAK

I forget what version I was using at the time, but when I had an ORACLE_HOME defined for the environment and TNSNAMES file defined in SQL Developer (different one than was in ORACLE_HOME), that I would see results from both tns files. I don't know if that is still the case. I have since dropped my ORACLE_HOME environmental variable.

I am not able to shutdown the database by using stopsap

Dear all,
As mentioned in the subject "I am not able to shutdown the database by using stopsap". I am getting the following errors:
exec(): 0509-036 Cannot load program oracle<SID> because of the following errors:
        0509-150   Dependent module libjox9.a(shr.o) could not be loaded.
        0509-022 Cannot load module libjox9.a(shr.o).
        0509-026 System error: A file or directory in the path name does not exist
R3 is terminated correctly by using the command stopsap and also I am able to shutdown the database normally by using the SQL command.
Thanks for your cooperation.
Maher

Thank you Nick for your care.
I will test start/stop manually later; because the system is active and used by the users for testing purpose (not production).
Yes, LIBPATH is the same for both users.
The ownership/permisssion for the both files is
-rwxr-xr-x   1 <SID>adm   sapsys    stopdb
-rwxr-xr-x   1 <SID>adm   sapsys    startdb
I compared with production, it seems ok.
I started DBCheck by using the transaction DB13 and also it failed due to same errors.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000272, user name ****)
No application server found on database host
Execute logical command BRCONNECT On host *******
Parameters: -u / -c -f check
BR801I BRCONNECT 6.20 (113)
exec(): 0509-036 Cannot load program oracle<SID>because of the following errors:
#0509-150   Dependent module libjox9.a(shr.o) could not be loaded.
#0509-022 Cannot load module libjox9.a(shr.o).
#0509-026 System error: A file or directory in the path name does not exist.
BR805I Start of BRCONNECT processing: cdnybrme.chk 2004-08-11 08.27.04
exec(): 0509-036 Cannot load program oracle<SID> because of the following errors:
#0509-150   Dependent module libjox9.a(shr.o) could not be loaded.
#0509-022 Cannot load module libjox9.a(shr.o).
#0509-026 System error: A file or directory in the path name does not exist.
BR280I Time stamp 2004-08-11 08.27.07
BR301E SQL error -12547 at location db_connect-2
ORA-12547: TNS:lost contact
BR310E Connect to database instance <SID> failed
exec(): 0509-036 Cannot load program oracle<SID> because of the following errors:
#0509-150   Dependent module libjox9.a(shr.o) could not be loaded.
#0509-022 Cannot load module libjox9.a(shr.o).
#0509-026 System error: A file or directory in the path name does not exist.
BR280I Time stamp 2004-08-11 08.27.07
BR301E SQL error -12547 at location thr_db_connect-4
ORA-12547: TNS:lost contact
BR310E Connect to database instance <SID> failed
BR806I End of BRCONNECT processing: cdnybrme.chk 2004-08-11 08.27.07
BR280I Time stamp 2004-08-11 08.27.07
BR804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Do you think that we need to rebuild the Oracle Software ?
Thank in advance for your cooperation.
Maher.
Message was edited by: Maher M.

Not able to view the content in Microsoft help viewer (MS VS 2012)

Hello Team,
I'm Rahul from Daimler-Chrysler, Bangalore location. I’m the IT Engineer for Daimler-Chrysler.
We tried many settings in IE but still not able to resolved. So i need more expert help.
My customer having one issue-
# User is not able to view the content in Microsoft help viewer (MS VS 2012), below is the error: Its opening in HTML Format.
So please help me. Contact no- +91-9972004298. and personal id:- [email protected]/[email protected]
I call you to Microsoft customer care they advice me to ASK Question. Please help me, I'm waiting for your reply.
Thanks,
Rahul B. Patil.
+919972004298.

Hi Sri,
it looks that your HANA instance has been created before we enabled the web-based development workbench. Some privileges are missing, we can't migration those existing instances.
Nevertheless you can ignore the error above. You can see all the content inside your instance "smstest1".
If you want to get rid of the cosmetic issue. You might delete this instance and create a new one.
Best regards
Xu

PI is not able to pick the file from the FTP folder

This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
PI Adapter Log:
An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
FTP Log:
(207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MDTM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> REST STREAM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> SIZE
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLST type*;size*;modify*;
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLSD
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH SSL
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH TLS
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> UTF8
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CLNT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MFMT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
It should list *TLOG.txt* but instead it is trying to get into a directory named *TLOG.txt*. same for other interface.
So me & my team is struggling for last couple of days to fix this issue.Please share your suggestion

Hi Sisir
The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
Sisir Das wrote:
"/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path.

Not able to view the excel output from eBS

Hi All,
I am not able to open the reports for the first time and this error is keep on coming everyday whenever i try to open any report for the first time.
     Microsoft office Excel cannot access the file 'http:// '. There are several possible reasons:
     The file name or path does not exist.
     The file is being used by another program.
     The workbook you are trying to save has the same name as a currently open workbook
But in the second time o/p opens without any issues.
Can you please let me know what will be the cause of the issue.
Thanks
Rajesh

What browser are you using?
If Chrome, try something else. Chrome works fine with help on the server but not locally. There is more in Snippets on my site about the Chrome issue.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Not able to generate the spool from transaction cv02n .Kindly help,urgent..

Hi ALL,
I have a problem in transaction CV02N. Actually i am an ABAPER, but i need some help of PP Guys.
The requirement is as follows:-
The client says that they have uploaded a '.PS' file into the transaction cv02n.Here in the first screen they give doc, doc type,doc part, doc version. when clicked on enter it take us to second screen , where they enter the '.PS' file path under 'originals' , in the tab 'document data'. Later they goto transaction CO01 and release an order at the operation level and save it.
Then it generates a spool. Now if we goto SP01 and check the spool with the number generated during saving CO01. We will be getting the scripts and the '.PS' file separately in a different spool in the production system in 4.6. But in my new upgraded system(6.0), i am not able to view the '.PS' file in the output spool.It seems to me that, it is not getting generated. Pls suggest me, as it is a very urgent issue. Need to close it by today at 1.00pm.
Regards,
Manasa.S

dear friend,
there would be several reasons for that.
first, check out your Output Device (your user in SU01) - goto to tab Defaults and look at Spool Control.
did you tick the 'output immediately' checkbox?
Fix it if nessesary. Just in case run SPAD to check out your device.
second, check out the 'output' config for Document Management (because you use t-code CV02N).
also make sure that relevant output condition exists.
third, ask someone to do the same - another user with another output device. does he/she have the same problem?
and the last, try to find out the functional guy or documentation.
also ask your basis guy regarding the lost transports or any other issues...
do not worry, life is good.
good luck!

Not able to see the generated chart image

I'm using Oracle 6i Reports and Oracle 9i dtabase to generate a report with graphs embedded. I'm able to view the tables populated with exact values but cannot see the graph. The chart image and html generated are placed correctly in the directory pointed to cahedir, but yet I'm not able to see the image. Can you tell me how to congifure the Html output from the server. The server is introducing a base tag pointing to a different location. Can I change the location.

HI
It is still not showing image. Messsage coming is "Right Click Here to Download Pictures. To help protect your privacy. Outlook prevented automatic download to this picture from the internet."
Thanks & Regards,
Ravi Grover

Not able to locate the path of adgentopfile.sh

Similar Messages

Maybe you are looking for