Not Able to maintain the Stock

Hi All,
When i am using the MB1C Transaction code fro Maintaining the Stock then the error is occur "Fld seclectn for movt type 561/acct 799999 differs for Ext. GA amount in LC (023)"For that reason I am not able maintain the Stock.
Can any one give the right solution?

Hi,
Go to t-code OMJJ >>> Select movement 561 >>> Double click on FIELD SELECTION(from 201) BATCH SEARCH PROCEDURE at left side
Then again select movement type 561 >>> Details (Magnifying glass icon)
Then double click on MATERIALS MANAGEMENT >>> Ext. GA amount in LC
Either suppress this entry and save
Then go for material posting
Kapil

Similar Messages

  • Not able to get the maintainance cost

    Hi all,
    I m stuck with a critical issue. I m not able to get the cost of maintainance. while creating maintainaince order I m getting ERROR - MISSING FORMULA IN WORK CENTER and a warning message NO PRICE COULD BE DETERMINED FOR INTERNAL ACTIVITY .
    I have done everything which I know regarding costing configuration.
    I have created activity type ,asigned it to the cost center,assigned parameter to the std value key what else is required.
    I m not getting any of the cost in costing tab of maintainance order .
    Please help me out.
    Thanks& Regards
    Pooja

    Hi ,
    1. In Work Center under costing tab , maintain cost center
    In work center which you are using in Maintenanace Order operation , please mention the activity type in Act Type Int Proc field and formula as SAP008  in costing tab of work center ..
    2. In Schdueling Tab of IR02 mention SAP004 in Other formula Field.
    3. In Capacities tab of Work center  maintain SAP008 as other formula
    4. In KP26 for the combination of cost center , activity type ,version, period  maintain fixed price ..
    5. Check whether value categories are assigned to cost elements in Config
    6. Check whether costing variants are assigned for Planned nd Actual costs to combination of plant and order type ..
    plz check the above and then test up again with a new order
    regrds
    pushpa

  • Not able to find the source requirement of MRP RUN-(for planned order)

    Dear All,
    Actullay In MRP run system is generating 10000 qty in planned order but in MD61 there is only 3000 qty and no sales order requirement also exists for the same. And when i rerun the MRP by choosing option 3 in planning mode, then also it is generating the planned order for 10000 qty only but Iam not able find out the base requirement for that. Kindly suggest me the solutions.
    Regards,
    Krishna

    Hi
    In MD04 at bottom, you can see a button for pegged requirement, click there you will come to know the list of requirement. It is not only because of Planned independent requirement you maintain in Md61, it could be due to lot size in Material master, or if you have fixed vendor in sourcelist then it could be because of Minimum order quantity with the vendor, or it could be safty stock or reorder point maintained in Material master
    Regards
    Antony

  • Not able to Cif Safety stock.

    Hi All
    I am not able to cif the safety stock.I tried RIMODINI also.The parameters like lot size ,text etc I m able to cif.
    But not safety stock.Can anyone help me in this.
    R

    Hi Roshan,
    If your material is  in integration model then initial transfer of that model should transfer Safety Stock as well irrespective of whether an entry is maintained in BD52- CIFMAT or not.
    Tell me one thing, is safety stock not getting transferred for all materials or for some materials?
    if it is happening with all the materials then:
    --> I think you need to check CIF logic, somewhere safety stock must be getting deleted, you may have to debug and find out.
    I hope this will help.
    Thanks,
    Anupam

  • Not able to change the data of test data containers in production system

    Dear All,
    We have created eCATT scripts in Development SolMan System and moved the transports to Production SolMan System.  Customer wants to change the data at Test data containers and run the scripts in production system but we are not able to edit the data. 
    May be the reason is SCC4 transaction code has set the below option.
    Changes and transports for client-specific Objects
    u2022 No changes allowed
    Customer doesnu2019t want to change the above option and wanted to change the test data containers to give different datau2019s and run the eCATT scripts.
    Could you please let me know the solution for this?
    Your help is really appreciated.
    Thanks,
    Mahendra

    eCatt has the feature where you don't need to transport the scripts or test configuration to our target system. We can keep all our scripts and test data in Solman and run this script any other system in your landscape using the System data container and target system.
    Maintain the production as one of the target system in System container in Solman and point that system while running the script. Change the test data in Solman to run this script.
    Let me know if you need more information
    thanks
    Venkat

  • Not able to get the data in PE51

    Dear Freinds,
                  I have copied similar to the standard in IN01 , in the Pe51> Windows i have kept under W1 all the wage types which comes under earnings and when i execute the payslip   i.e  in the simulation run and when i view the form i can see
    only the wage types but i dont find the correspnding amounts agains each wage type. Please could any one help me
    why iam not able to get the amount agains the wge type?
    regards
    divya.

    Hi,
    I think u might have done some mistakes while configuring PE51 in cumulation ID ..........
    First of all as Siki said check ur master data whether the WT has given in IT 0008 and corresponding amounts entered to the resp WT. if it is ok then check the pe51 config once........
    go to pe51 give ur form name and select cumulation IDs go to change mode and double click on Earnings and see whether the data is maintained in this manner or not .......
    Table = RT ,   ID = your WT code ,    MS = + (sign)   ,  Dsplit = * (sign),      rest all coulumn leave blank ........ save it and then again run the payrl in Live mode and see the Pay slip.........
    If any problem Pls let us know.... and see other gurus post also.
    Regards,
    Prashant

  • F110- not able to clear the debit and credit entry with the same reference

    Hi,
    I am not able to clear the debit and credit entry with the same reference in F110 even after having the payment terms as immediate payment, payment method is maintained in document no and vendor master data. Both debit and credit entry is appearing in FBL1N as an open item but it is not appearing in F110.
    In Log message appear as 8 days grace period is existing whereas as payment term is just 0001- immediate payment.
    Kindly advice me what could be wrong.
    Thanks,
    Manya.

    Hi,
    Credit and debit balance in vendor account are not cleared automatically when only vendor line item has payment method and credit memo has not payment method. Also when there is not payment method maintained in vendor master data.
    In such case to avoid payment to vendor when vendor has debit balance we perform debit balance check.
    In second scenario when u2018individual paymentu2019 is selected in vendor master data vendor invoice and credit memo are not cleared automatically in F110.
    To setoff vendor credit and debit balance in F110 you to uncheck u2018individual paymentu2019 check in vendor master data > company code data > payment data.
    Thanks!
    Raju

  • Maintain the Stock in SAP problem

    Hi,
    In my Business Process (Textile Industry)  First they will receive the Material from the Customer (GRAY Material) after 2 or 3 months customer will give the Program for the Material
    In this how we can maintain the Stock in SAP and also while Raising the Sales order how we are going to track that particular customer material GRAY

    Hello prasanna
    In my Business Process (Textile Industry) First they will receive the
    Material from the Customer (GRAY Material) after 2 or 3 months customer
    will give the Program for the Material
    In this how we can maintain the Stock in SAP and also while Raising the
    Sales order how we are going to track that particular customer material GRAY
    The business process as cited by you is not clear, could you please rephrase and explain clearly the business scenario so that it will be easy to provide suggestion ?
    Best Regards,
    Sarthak

  • Not able to close the Org Period

    Hi,
    We recently upgrated from 11.5.10.2 to 12.1.3, and we are not able to close the org due to error in tables WSM_LOT_MOVE_TXN_INTERFACE and WSM_LOT_SPLIT_MERGES_INTERFACE. The records are getting reflected as 'Pending WSM interface' - Resolution Required.
    These records are back dated, with year as 2007/2009 and for some Jul'11, for which period has been closed except Jul'11 which is - 'Closed not Summarized'.
    Sample records are like
    Pending Shop Floor Lot Split Merge Transactions WSM_LOT_SPLIT_MERGES_INTERFACE Resolution Required
    Header Id Transaction Id Transaction Type,Transaction,Date,Transaction Reason,Reference,Lot,Process,Status,WIP,Flag,Split,Flag,Group Id Request Id Error Message,
    1030,Lot Based Inventory,Translate,25-OCT-07 07-3547-B4 Error 2 1 1031 210415824 Invalid lot_number in Starting Lots,11547,Lot Based Inventory,Translate,25-OCT-07 07-3547-B4 Error 2 1 ,11548 211066708 Invalid lot_number in Starting Lots
    Pending Shop Floor Lot Move Transactions WSM_LOT_MOVE_TXN_INTERFACE Resolution Required
    587560686 2 12-MAR-09 09-4139-C1 Error 17200 50 END 999 END 20156699 290394731 Error:WSMPLBMI.MoveTransac
    tion(stmt_num=240) :
    Has any one faced same issues with OSFM/INV modules closing process ?
    Regards
    Adarsh K

    Hi,
    Please check the charecterstic of Book Area 01 in customization. If net book value has been maintained as negative, then you have to run depreciation to make it negative.
    If depreciation for all asset has not been run a particular fiscal year then you cannot close the fiscal year.
    Please check wheather depreciation for all additional assets has been run or not.
    Hope you have understood.
    Regards
    Tapan

  • Not able to use the  deleted Del. document serial nos

    Dear All,
    I am not able to reuse the reverse PGI document serial nos.
    Proess is like that I have done PGI with serial no. and due to some reason i have to reverse the PGI and further i deleted the existing del. doc no. . Now when i am going to reuse the serial no. for new del. no. it is showing  error that the serial no. has
    customer status.
    Kindly suggest me the config for the same.
    Thanks in advance.
    Dear Experts please advise on the same.
    Regards
    AJIT K SINGH

    Hi Ajit,
    It simple to correct it.
    Problem is when you reverse the delivery and Delete the status has not been changes.
    For resolving this issue, you should have the access of T-code IQ02 --> enter your material number and serial number --> Enter --> Click at "Edit" (Menu) --> Special Serial number function --> Manual Transaction --> Select "To stock" --> Status become ESTO --> then you can use it for other order or delivery.
    Hope it helps,
    Regards,
    MT

  • Not able to change the the Contract Line Item Payer

    Hi there,
    I am not able to change the Contract Line item Payer and giving an error message '' Credit limit customer differs from credit limit customer in header''.
    I checked the credit management assignment and the Business partner is assigned with the required Payer.
    Request your help.
    Thanks,
    Renjith

    Hi Renjith
    So first of all  check with which customer you have created Contract. So go to CMR data and check wheather you have maintained multiple Payers or not. If not maintained maintain multiple payers.
    As you are getting error  '' Credit limit customer differs from credit limit customer in header'' , so check the payer at header level and item level also. the payer at header level and item level should be different.
    Regards
    Srinath

  • Not able to enter the count for physical inventory document in WM

    Hi All,
    I have created a Physical Inventory document using LX16 t-code (WM managed). Since the material and bin stock is zero and When I try to enter the count by ticking zero stock indicator using LI11 t-code, I am not able to save the document and system throws error "Finding empty Quants provided for" and message number is L4058.
    Please let me know how to resolve this.
    Regards
    Krishnamurthy

    Yes your understanding is correct but only thing I have not entered qty in the count field rather I set only zero stock indicator.
    My requirement is " In Inventory (MMBE) stock of a material shows around "3000" qty. But In WM stock is "zero" and physically also "zero". so in IM also stock should be reduced to "Zero". So I tried of creating PI document in WM and then when I try to enter the count, I faced the menioned problem.
    Regards
    Krishnamurthy

  • Not able to attach the scanned document with Interaction Record in SAP-CRM

    Hi Experts,
    I have a scanned document and I am trying to attach it with Activity in Interaction Record.
    I maintained the document ID refering to scanned document in table TOA01 with interaction record guid; however the attachment gets displayed in SAP-CRM GUI but i am not able to see the attachment in SAP-CRM GUI.
    Please help if someone has encountered a similar issue or propose a way to attach the document with acitivity in interaction record.
    Regards,
    Amit Gupta.

    Hello Amit,
    I am not able to understand your requirement correctly. Are you trying to attach the Document as a Attachment to the Interaction record (or) trying to attach it as a Archive Link Document??
    If you could give me more info.. I think I will be able to assist you with this as I have worked in this area...
    Cheers..
    Anand

  • Not able to change the Valuation class of a Material

    Hi Team,
    I am not able to change the Valuation class of a Material even if the stock is zero.
    Please assist.
    Thanks in advance.
    Chetan

    Hi Chetan,
    Please check if any open PO for this Material exist, if it is there, delete it and try to change VC.
    Thanks,
    Ninad

  • Not able to edit the records in the table

    Hi Experts,
    I am not able to edit the records or delete the records from a database table.
    Those fields are not enabled.
    Edit icon is not at all there.
    Wat can i do.
    Cheers,
    Karthick

    Hi,
            In SM30, u can edit or delete records from a table.Before goin to this u need to create table maintainance generator for this table.
    regards
    lakshmi

Maybe you are looking for