Not able to enter the count for physical inventory document in WM
Hi All,
I have created a Physical Inventory document using LX16 t-code (WM managed). Since the material and bin stock is zero and When I try to enter the count by ticking zero stock indicator using LI11 t-code, I am not able to save the document and system throws error "Finding empty Quants provided for" and message number is L4058.
Please let me know how to resolve this.
Regards
Krishnamurthy
Yes your understanding is correct but only thing I have not entered qty in the count field rather I set only zero stock indicator.
My requirement is " In Inventory (MMBE) stock of a material shows around "3000" qty. But In WM stock is "zero" and physically also "zero". so in IM also stock should be reduced to "Zero". So I tried of creating PI document in WM and then when I try to enter the count, I faced the menioned problem.
Regards
Krishnamurthy
Similar Messages
-
I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?
You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.
-
Hi
My Mac book pro is behaving strangely. I am not able to enter the Password and can't open any application/folder. To log-in I have to give forced shutdown. When ever I try to open any application the screen turns grey (some times) and the window pop up " --------- quit unexpectedly".
I updated the OS too from the available updates but the problem persists. I have reasonable amont of data in it, which definitely I do not want to loose.
Kindly let me know how can I come out of the above scenario?Hi Susan,
In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
- Abhishek Maurya -
Hi, I recently updated my iPhone 4 with the new OS 5. However, mid way now the laptop is not able to find the drivers for the iPhone. Please help
Please search the forums. This has been covered here extensively.
-
I am trying to remove the backup encrypt for my Iphone 4 but the itunes ask for the password and basically I have not set any password before ...!!! Please note that I entered the password for my apple account and also it did not work, how i can reset it?
You can't reset it. If you don't konw the password then you can't use that backup
-
Not able to update row count in Physical Layer..connection failed in OBIEE 11g
Hi Guys,
I am not able to do Update Row count in the Physical Layer, i am getting an error The Connection has failed. This is in OBIEE 11g Linux env.
I have put the tnsnames.ora file in the below path:
/*****/pkgs/linux/intel/OBIEE_DIT/MW_HOME/Oracle_BI1/network/admin/
I do not have admin under
/****/pkgs/linux/intel/OBIEE_DIT/MW_HOME/oracle_common/network/
But if i put the whole TNS entry in the Data Source Name i am able to connect:
(DESCRIPTION =(ADDRESS = (PROTOCOL= TCP) (HOST= xxx.xxx.com) (PORT= 1671))(CONNECT_DATA = (SERVICE_NAME = US1OBIEE)))
I am not able to understand the issue..
Thanks,
AmitLooks like rpd is looking for local tns config... try to use as hostname:port/ServiceName
This should work, just in case not working! stop doing so since it is know issue.
If helps mark -
Hi,
Before doing any thing in dos usually i run envshell
Which let me to switch to product specific location through Appl_top, au_top etc
I'm Sending Out Put At cmd Prompt Please Check
D:\oracle\visappl>echo %ar_top%
d:\oracle\visappl\ar\11.5.0
but not able to work for custom development.
D:\oracle\visappl>echo %cust_top%
%cust_top%
D:\oracle\visappl>
Why it's so?
Bachan.Hi There,
I got document, but not able to understand 2nd step i.e
"2) Add the custom module into the environment
Apply ADX.E.1 and add the entry to topfile.txt as a standard product top entry (follow the existing model in the file)
Customised environment variables can be added to AutoConfig by using the filename specificed by s_custom_file, which is then called from the APPSORA.env file.
If using Forms Listener Servlet, you may also need to add $CUSTOM_TOP to formsservlet.ini in $APACHE_TOP/Jserv/etc"
1. What is ment by ADX.E.1 and topfile.txt ?
2. And How can i add to "AutoConfig by using the filename specificed by s_custom_file, which is then called from the APPSORA.env file. " ?
3. And agin What is ment by "If using Forms Listener Servlet, you may also need to add $CUSTOM_TOP to formsservlet.ini in $APACHE_TOP/Jserv/etc"
Please Give a breaf note on this Question's.
Thanks Bachan -
Hi All,
I have implemented the Out of Box solution of Order Management Analytics module with 11.5.10 version of Oracle EBS and respective adopters. Under the same I am not able to notice any mapping to load the data into W_CUSTOMER_STATUS_HIST_F_TMP table and due to which it causing few reports under order management.
Could you please tell me the mappings name for this Target Table so that I can verify from my side if it has been missed or so?
I am finding this W_CUSTOMER_STATUS_HIST_F_TMP table is getting used as Source Table under the folder of PLP for the mapping as,
PLP_CustomerStatusHistoryFact_Extract
PLP_CustomerStatusHistoryFact_Old_Customers_Load
and PLP_CustomerStatusHistoryFact_Extract
Thanks,
-VinayNot sure this would help but As per data lineage guide, it says PLP_CustomerStatusHistoryFact_Extract mapping populates this table from series of different tables. Later, From temp table it goes to W_CUSTOMER_STATUS_HIST_F table via mapping PLP_CustomerStatusHistoryFact_New_Customers_Load
~r -
Not able to calculate the count in Query
Hi Experts,
I have 2 cubes in a multi provider in which
Cube 1 has Work Order, Order Types, Status etc..
Cube 2 has Order type, Actual hours (Key figure)...
Now i want to calc the "Count of Actual hours work from all the work orders, with Order Type XXXX and with status XXXX.
Now i need to calc the total number of hours based upon the selection, For this, i have built a structure in Keyfigures section, but its not displaying any values in that.
Please some one help me out how to calculate this.... PLease reply me ASAP as this is a high priority requirement.
Will assign points for helpfull answers.
Thanks in Advance,
Chintu..Dear Chintu
If u r working on BI 7.0 then create Infoset using both the cubes (its not available in 3.X). Because, Infoset create a join whereas Multiprovider is used to create a Union of two or more object.
Assign point if it helps. -
Query Planning enabled - but not able to enter the data
Hi,
Created a query which is planning enabled (Check box ticked on Planning Tab in query designer - Start query in change mode checked).
After execution of the query, if I try to input some plan data, the query is in display mode only. I am not able to input any data.
Can you please tell me where is going wrong.
Regards,
RaviHi Ravi,
First of all an input enabled query can only be created on aggregation level.
As far as your issue is concerned, it seems that your query might not be having
the required restrictions for the characteristics or are not drilled down.
Please note that characterictics defined in rows are automatically restricted to a single value , but the same is not the case with the 'Free Characteristic' in the query.
Please check the restrictions you have made in your query.
Regards,
Amit -
Not able to modify the data for infotype 0008 using FM
Hi All ,
I have got a requirement for updating the infotype 0008 data using FM : HR_MAINTAIN_MASTER_DATA.
While trying to modify the wagetypes data which is of blank ..unable to upload the amount for that partcular field ..
For this am herewith the link of o/p :
http://i55.tinypic.com/28jfw2c.jpg for this am also posting the code...
Please suggest me furthur in what way i can upload..
SELECT * FROM pa0008 INTO TABLE itab_pa0008
FOR ALL ENTRIES IN itab
WHERE pernr = wa_data-pernr
AND begda = wa_data-begda_out
AND endda = wa_data-endda_out.
DESCRIBE TABLE itab_pa0008 LINES lin.
IF lin EQ 0.
c_action = 'INS'.
ELSE.
c_action = 'MOD'.
ENDIF.
LOOP AT itab INTO wa_itab WHERE pernr = wa_data-pernr.
CLEAR: wa_bapireturn, wa_bapireturn1, wa_hr_return.
REFRESH: it_pprop[],it_modified_keys[].
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-TRFAR'. "1
it_pprop-fval = wa_itab-trfar.
APPEND it_pprop.
CLEAR it_pprop.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-TRFGB'. "2
it_pprop-fval = wa_itab-trfgb.
APPEND it_pprop.
CLEAR it_pprop.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-TRFGR'. "3
it_pprop-fval = wa_itab-trfgr.
APPEND it_pprop.
CLEAR it_pprop.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-TRFST'. "4
it_pprop-fval = wa_itab-trfst.
APPEND it_pprop.
CLEAR it_pprop.
flag = flag + 1.
*****************************************************************************************************5
BREAK-POINT.
IF NOT wa_itab-lga1 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA01'.
it_pprop-fval = wa_itab-lga1.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet1.
ENDIF.
IF NOT wa_itab-bet1 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET01'.
it_pprop-fval = wa_itab-bet1.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************6
IF NOT wa_itab-lga2 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA02'.
it_pprop-fval = wa_itab-lga2.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet2 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET02'.
it_pprop-fval = wa_itab-bet2.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************7
IF NOT wa_itab-lga3 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA03'.
it_pprop-fval = wa_itab-lga3.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet3 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET03'.
it_pprop-fval = wa_itab-bet3.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************8
IF NOT wa_itab-lga4 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA04'.
it_pprop-fval = wa_itab-lga4.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet4 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET04'.
it_pprop-fval = wa_itab-bet4.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************9
IF NOT wa_itab-lga5 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA05'.
it_pprop-fval = wa_itab-lga5.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet5 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET05'.
it_pprop-fval = wa_itab-bet5.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************10
IF NOT wa_itab-lga6 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA06'.
it_pprop-fval = wa_itab-lga6.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet6 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET06'.
it_pprop-fval = wa_itab-bet6.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************11
IF NOT wa_itab-lga7 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA07'.
it_pprop-fval = wa_itab-lga7.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet7 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET07'.
it_pprop-fval = wa_itab-bet7.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************12
IF NOT wa_itab-lga8 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA08'.
it_pprop-fval = wa_itab-lga8.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet8 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET08'.
it_pprop-fval = wa_itab-bet8.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************13
IF NOT wa_itab-lga9 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA09'.
it_pprop-fval = wa_itab-lga9.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet9 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET09'.
it_pprop-fval = wa_itab-bet9.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************14
IF NOT wa_itab-lga10 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA010'.
it_pprop-fval = wa_itab-lga10.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet10 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET010'.
it_pprop-fval = wa_itab-bet10.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************15
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA11'.
it_pprop-fval = wa_itab-lga11.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET11'.
it_pprop-fval = wa_itab-bet11.
APPEND it_pprop.
CLEAR it_pprop.
********************************************************************************************************16
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA12'.
it_pprop-fval = wa_itab-lga12.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET12'.
it_pprop-fval = wa_itab-bet12.
APPEND it_pprop.
CLEAR it_pprop.
********************************************************************************************************17
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA13'.
it_pprop-fval = wa_itab-lga13.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET13'.
it_pprop-fval = wa_itab-bet13.
APPEND it_pprop.
CLEAR it_pprop.
********************************************************************************************************18
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA14'.
it_pprop-fval = wa_itab-lga14.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET14'.
it_pprop-fval = wa_itab-bet14.
APPEND it_pprop.
CLEAR it_pprop.
BREAK-POINT.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
number = wa_itab-pernr
IMPORTING
return = wa_bapireturn1.
BREAK-POINT.
IF c_action = 'INS'.
CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
EXPORTING
pernr = wa_itab-pernr
actio = 'INS'
tclas = 'A'
begda = wa_data-begda_out "'20110401'
endda = wa_data-endda_out "'99991231'
dialog_mode = '2'
luw_mode = '1'
IMPORTING
return = wa_bapireturn
return1 = wa_bapireturn1
hr_return = wa_hr_return
TABLES
proposed_values = it_pprop
modified_keys = it_modified_keys.
IF NOT wa_bapireturn IS INITIAL.
WRITE : / wa_bapireturn.
CLEAR : wa_itab , wa_bapireturn.
ENDIF.
ELSEIF c_action = 'MOD'.
CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
EXPORTING
infty = '0008'
pernr = wa_itab-pernr
actio = 'MOD'
begda = wa_data-begda_out "'20110401'
endda = wa_data-endda_out "'99991231'
record = p_record
recordnumber = wa_itab-SEQNR
operation = change
nocommit = nocommit
dialog_mode = '0'
IMPORTING
return = wa_bapireturn
return1 = wa_bapireturn1
hr_return = wa_hr_return
TABLES
proposed_values = it_pprop
modified_keys = it_modified_keys.
IF NOT wa_bapireturn IS INITIAL.
WRITE : / wa_bapireturn.
CLEAR : wa_itab , wa_bapireturn.
ENDIF.
ENDIF.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
EXPORTING
number = wa_itab-pernr
IMPORTING
return = wa_bapireturn1.
ENDLOOP.
ENDLOOP.Here is a sampe, and the logic you are using for wages goes in the internal table for wages (you already have the enqueue & dequeue so you don't have to worry about that, so you only have to add the BAPI_TRANSACTION_COMMIT):
CALL FUNCTION 'BAPI_BASICPAY_CHANGE'
EXPORTING
employeenumber = pa0008-pernr
subtype = pa0008-subty
objectid = pa0008-objps
lockindicator = pa0008-sprps
validitybegin = pa0008-begda
validityend = pa0008-endda
recordnumber = pa0008-seqnr
payscaletype = pa0008-trfar
payscalearea = pa0008-trfgb
payscalegroup = pa0008-trfgr
payscalelevel = pa0008-trfst
* NEXTINCREASE =
* LOCALALLOWLEVEL =
* PARTNERSHIP =
* CURRENCY =
* COMPARISONPAYSCLTYPE =
* COMPARISONPAYSCLAREA =
* COMPARISONPAYSCLGRP =
* COMPARISONPAYSCLLVL =
* COMPNEXTINCREASE =
* CAPACITYUTILLEVEL =
* HOURSWORKEDPERPERIOD =
* ANNUALSALARY =
* CASEGROUPCATALOG =
* CASEGROUP =
* CURRENCYANNUALSALARY =
* REASON =
* NOCOMMIT =
* importing
* return =
TABLES
wagetypes = wages.
Regards,
Ryan Crosby -
Not able to post the Time for already created timecard
Hi All,
I have a question on OTL, already time is posted for a week say 29-MAY-2010 to 06-JUN-2010 (for 5 working days), now I need to post the time on saturday & sunday too.
I'm using all the mentioned API's given by the oracle. But while processing the API's, it is throwing an error saying 'Time is already posted for this period'.
Time is posted for the week (start date & end date) but not on saturday & sunday.
Can any one help me out of this issue.
Below is the list of API's I'm using.
1.hxc_timestore_deposit.create_timecard_bb - To create the timecard for the period (in this case it is week)
2.hxc_timestore_deposit.create_day_bb - To create the day wise records for the above timecard id.
3.hxc_timestore_deposit.create_detail_bb - To create the detail hours for the above day wise records.
4.hxc_timestore_deposit.execute_deposit_process - To submit the timecard for the approval.
Thanks in advance..
--RajaCan you share your code you are using for update? It looks like you are treating the update case as create case. Make sure you use the update apis' during timecard update.
--Shiv -
Not able to Enter the order WareHouse is not populating
Hi All,
STEPS
1. Navigate> OM Sales Orders>
2. enter info on first tab.
3. Select 'Others tab at header and
4. crtl+L to activate the lov enter % for a full list.
but here i am not getting any warehouse .
this is R12.1.1 instance
Please help
Thanks,
Satyam
Edited by: user518033 on Dec 1, 2009 5:06 AMHi Satyam,
As asked by Mr. Nagamohan, could you please confirm what kind of environment you are using..Vision, Dev or test instance.
In Inventory, did you define the Inventory Org for your Business..? If not.. try to define one Inv org, then go to SO Module and try to do the same exercise what you mentioned :
1. Navigate> OM Sales Orders>
2. enter info on first tab.
3. Select 'Others tab at header and
4. crtl+L to activate the lov enter % for a full list.
We are sure it will atleast pull the new Inv org which you just defined...
Good Luck...
Regards,
S.P DASH -
User is not able to find the receipt for a PO in the receit find form
Hi All,
There is a receipt created for a PO. But when i try to search in the Receipt search window, its says 'No Data Found. Can anybody tell me why will this happen and what can be the fix.
Thanks in Advance.
ThanksHi,
Thanks Stick and Sandeep for the response.
Yes, both are in the same ORG.
I queried the PO and select View Receipt (here i can view the receipt details) and then Transactions, but i do not see any error message there.
Thanks
Edited by: Skumar on Jun 27, 2011 2:37 PM -
Not able to access the URL for this web service (BPR)
1. Start SAP Solution Manager and call transaction SICF.
2. Right-click on default_host/sap/bc/solman, for example, and
select Enable service. When the service is enabled, additional
subgroups are visible.
Enabling reveals the URI of the Web service. In this case, it is
/sap/bc/solman/bpr. The protocol type is http. If you right-click
on bpr and select Display service i got the below error
<soap:Envelope soap:encodingStyle="http://schemas.xmlsoap.org/soap/encoding">
<soap:Header/>
u2212
<soap:Body>
u2212
<soap:Fault>
<soap:faultcode>Client</soap:faultcode>
<soap:faultstring>Missing SOAP envelope.</soap:faultstring>
</soap:Fault>
</soap:Body>
</soap:Envelop
Regards,
NeniHello Neni,
In most circumstances this error was caused by incorrect customizing, an external alias for the default host /sap/bc/solman/defaultuser had an incorrect target handler assigned to it.
Solution Manager's IMG and documentation (www.service.sap.com/solutionmanager) should detail the correct
value to use.
The correct values can be maintained in SICF.
On top of this, please review the following URL for external aliases documentation:
http://help.sap.com/saphelp_sm40/helpdata/en/78/9852bdc06b11d4ad310000e83539c3/frameset.htm
Thanks,
Mark
Maybe you are looking for
-
Unicode enabling for ABAP scripts and smartforms
Hi All, Could any one please advice us how we can identify whether the script or smartform is unicode updated or not and how we can convert the non unicode scripts and smartforms to unicode scripts and smartforms. Thanks, Srikanth.
-
Installment Payment (OBB9)
When I am trying to setup configuration for Installment payment (OBB9), it is trowing message "For term of pmnt GE, holdback/retainage no. 01 is missing" and not getting save. Could any one explain elaborately to rectify this error. regards, Krishna
-
Remove spacing between div tags
Is it possible to remove the spacing between div tags? If so how do you do it?
-
Installing the Alternative CS2 in the right language
The issue at hand is, that i'm trying to activate my old CS2 product, which I cannot do anymore. And so, we were talking about the alternative method, of downloading the non-activation version in chat. The problem is tho, That I want it to be 100% da
-
Import ESS/MSS PACKAGE FOR MODIFICATION
hi everybody, Anyone suggest me how TO download ESS/MSS applications from portaL AND import into NWDS AND MODIFY. Thanks. Devi