Not able to read long text in MCI10001

Hi gurus,
I am using MCI10001 for IW21 tcode where I have to read long texts of maintenance line items under Maintenance Tasks tab.
Long text is not getting created for line items at this exit. Please suggest me if any exits/BADIs available where I can read the same.
Thanks in advance.
Anees

Hello,
You need to set FM ‘SAVE_TEXT’.or 'CREATE_TEXT'
tdformat = '>X' <-- this format you can not set directly in editor
CONCATENATE '*' tdline
INTO tdline
SEPARATED BY space.
this will make text to be non editable.
Thank you...

Similar Messages

Definition of a "NOT RELEVANT GRANT" is missing. Read long text

Dear All,
Kindly suggest me how to post migo.
During MIGO system throwing an error:
Definition of a "NOT RELEVANT GRANT" is missing. Read long text
Message no. GRANTMGMT408
Regards
Sanjeet

Hi Sanjeet,
It looks like your FI team has done config regarding Grands management and Funds Management.
Plz consult with them...
Check the SAP-Help for any doubts.
SAP Library - Grants Management
Plz check with transaction - "GMGRANTD" , if anything available.

Reading long text for more records at a time

Hi all,
We have a requirement for which that data like textid textname textobject and language must be taken in to an internal table and for each record in the internal table i have to read the long text inorder to compare the long text for the given search text.
If i use Read_text inside the loop and endloop it works but it may not be appropriate in performance point of view.
Is there any function module which can read long texts for more records at a time.
The long text data in STXL will be in raw data format right? is there any way to convert raw data to normal so that by hitting the STXL i can read the long text data for more than one record at a time.
Thanks in advance
sanju.

HI Sanju,
Below is a code snippet which describes reading a long text frm the screen and appending it into the internal table.This code is actually to read the text from the screen and inserting a record into STXl and STXH.
From your query what i understood is that you are storing the long text from the screen into a internal table and so you not want to use the read_text FM due to performance issue.
Since tdline(tline table) is 132 char long format i use this small logic to read the screen data and append it to my internal table.
*Data Declarations
DATA: lv_strlen TYPE i,
        lv_create TYPE boolean,
        lv_desc TYPE string.
DATA: ls_text TYPE tline,
        ls_basic_text TYPE stxh.
DATA: lt_text TYPE ztty_tline_tab.
CONSTANTS:
   lc_tdid TYPE thead-tdid VALUE 'Z001',
   lc_tdobject TYPE thead-tdobject VALUE 'Z_ALERTS'.
*Appending the text to the internal table.
lv_strlen = STRLEN( iv_alert_text-alert_text ).
lv_desc = iv_alert_text-alert_text.
IF lv_strlen < 132.
    ls_text-tdformat = '*'.
    ls_text-tdline = lv_desc.
    APPEND ls_text TO lt_text.
ELSE.
*logic to wrap text
    DO.
      ls_text-tdformat = '*'.
      IF STRLEN( lv_desc ) < 132.
        ls_text-tdformat = '*'.
        ls_text-tdline = lv_desc.
        APPEND ls_text TO lt_text.
        EXIT.
      ENDIF.
      IF lv_desc+132(1) <> ' '.
        CONCATENATE lv_desc(131) '-' INTO ls_text-tdline.
        lv_desc = lv_desc+131.
      ELSE.
        ls_text-tdformat = '*'.
        ls_text-tdline = lv_desc(132).
        lv_desc = lv_desc+132.
      ENDIF.
      APPEND ls_text TO lt_text.
    ENDDO.
ENDIF.
Please award graciously if found helpful.Please do ask me if i have not answered you properly.
Thank you.
Message was edited by:
        P M Harish

Not able to pick PO text via READ_TEXT when PO is created by copy.

Hi,
I am not able to pick PO texts from READ_TEXT function module for PO's which are created via Copy of another PO as entries for that PO texts are not found in STXH table.However after creating PO if I do some modification in any text and save PO again then READ_TEXT is able to pick that text.
Please help.
Thanks.

>
powerstar wrote:
> PLease try the sample code as shown below..
>
> data: lc_ebeln type ekpo-ebeln,
> lc_ebelp type ekpo-ebelp,
> lc_text type thead-tdname,
> lc_id type thead-tdid,
> lc_object type thead-tdobject.
>
> data: it_tline type table of tline,
> wa_tline type tline.
> *wa_ekpo type ekpo.
>
> concatenate wa_ekpo-ebeln wa_ekpo-ebelp into lc_text.
>
>
> lc_id = 'F03'.
> lc_object = 'EKPO'.
> call function 'READ_TEXT'
> exporting
> client                        = sy-mandt
> id                            = lc_id
> language                      = 'E'
> name                          = lc_text
> object                        = lc_object
> * IMPORTING
> *   HEADER                        =
> tables
> lines                         = it_tline
> exceptions
> id                            = 1
> language                      = 2
> name                          = 3
> not_found                     = 4
> object                        = 5
> reference_check               = 6
> wrong_access_to_archive       = 7
> others                        = 8
> .
> if sy-subrc <> 0.
> * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
> *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
> endif.
>
> Regards,
> *******.
Did you get a chance to see what the OP is asking about?

I am not able to display the text conditionally

i am not able to display the text conditionally

Please check the below formula.
i am not able to print all the below text,the text is printing only one line and some is missing.
Please do the needful.
@(If(("@Endrdesc1."=="EWWC006"),"12 It is hereby understood and agreed that any work in connection with the delivery or cartage of goods other than by hand, handcart, cycle or bicycle is expressly excluded from the indemnity granted under this policy 97 It is hereby understood and agreed that any work away from shop or studio is expressly excluded from the indemnity granted under this policy.",""))

Upgrading my Iphone 4 I am not able to access my text messages or send texts.

Hi Everyone:
Since the last 9 days after upgrading my Iphone 4 I am not able to access my text messages or send texts. I have attempted to delete the "68" messages however, once deleted for a period 2-3 seconds. The deleted messages reappears! I have reset. restored. did back-ups! Nothing has altered this problem. Has anyone else experienced this? Please help? Thanks :-)

Thanks Diesel:
But I have been back and forth with my carrier and they are adament that this is not their issue but Apple's..... I do appreciate your reply!

I have received icloud mail in Arabic langauge. I could not able to read. So what should I do to activate my icloud account. Is there any chance to get mail in English?

I have received icloud mail in Arabic langauge. I could not able to read. So what should I do to activate my icloud account. Is there any chance to get mail in English?

I'm not positive about this, but I'd guess that the voicemail service is with your cellular provider i.e. will work w/o the phone instrument.
Doing the "remote lock" should not AFAIK prevent Find My... from working. But it might discourage a thief and cause him to turn it off before iCloud can snare its location? I'd have guessed NOT i.e. that it would register instantly, but I dunno how fast that works.
In any case that's your only hope at this point, to monitor your email and see if a "Found!" is received. If it were me, I'd use my netbook to check email all night long and wake me if one comes in. Good luck, and report back!

Not able to read the wsdl file from server Premature EOF encounter

Hi All,
I am facing issue while accessing a web Service from server. Here is the clear view about it.
I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
Now here i am facing peculiar behavior which i am not able to trace it out.
1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
Can someone please help in resolving the issue.
I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
Many thanks.
Tarak
Edited by: user11896572 on Jan 17, 2012 5:22 PM

Hi,
Setting default from the jdeveloper -
During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
Setting default from the em console -
After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
Refer -
http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
8.2 Managing the State of Deployed SOA Composite Applications
Thanks

How to read long text in Document line item

Hi,
How to read long text in FI Document line item.

Use Read_text function module.
you need to pass
ID
LANGUAGE
NAME
OBJECT to the function moduel
To find the Text id name language and object these are the following steps. Example: FB02
1. goto FB02, Enter Document number
2. from menuselect Goto>Header-->header Text..... New window will be displayed
3. select the Header Text. here you can see all the text.
4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper.
5. in the Next window you will find Text Name. Text ID, Language. etc...
Regards,
Lalit Mohan Gupta.

OIM 11G-prepop adapters not able to read from User form

When I try to auto provision ldap account for users after creation of OIM record using GTC, the ldap provisioning doesnt happen. Basically the prepop adapters not able to read from Xel user form. I am stuck with this issue for a while now .
I tried remapping..ect etc..ntng helped.
None of the process form fields are getting prepopulated, when I hard coded avlue in prepop adapters for all the reqd fields in process form, proviosioning gets completed successfully.
Pls. help me with this.
Thanks.
~VSN
I get the below errorr:
<BEA-000000> <Class/Method: tcAdapterExecuter/executeRuleGenerators encounter some problems: java.lang.Exception: Error retrieving user info: User Login
java.lang.Exception: java.lang.Exception: Error retrieving user info: User Login
at java.lang.Throwable.<init>(Throwable.java:67)
at com.thortech.xl.dataobj.rulegenerators.tcAdapterExecuter.executeRuleGenerators(tcAdapterExecuter.java:205)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.setDataFromAdapter(tcPrePopulateUtility.java:1020)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.prePopulate(tcPrePopulateUtility.java:346)
at com.thortech.xl.dataobj.util.tcOrderPackages.computeProcessFormData(tcOrderPackages.java:901)
at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(tcOrderPackages.java:423)
at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForUser(tcOrderPackages.java:177)
at com.thortech.xl.dataobj.tcOIU.provision(tcOIU.java:563)
at com.thortech.xl.dataobj.tcOIU.eventPostInsert(tcOIU.java:303)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2905)
at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(tcUserProvisionObject.java:283)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:591)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:104)
at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:35)
at sun.reflect.GeneratedMethodAccessor1831.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
at $Proxy284.execute(Unknown Source)
at oracle.iam.platform.kernel.impl.OrchProcessData.runActionEvents(OrchProcessData.java:1035)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:644)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:686)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.notifyParentProcess(OrchestrationEngineImpl.java:828)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:771)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:674)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:705)
at oracle.iam.platform.kernel.impl.OrhestrationAsyncTask.execute(OrhestrationAsyncTask.java:108)
at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:100)
at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:70)
at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
at sun.reflect.GeneratedMethodAccessor2150.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:148)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy382.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Kevin,
For manual Proviosioning - It works fine.
It fails when I create user in OIM using flat file GTC . I have an access policy to auto proviosion that user with ldap.
As mentioned before, I notice none of the prepops on Ldap process form are able to read value from Xel user form.
Steps I tried Already:
1- Checking access policy
2-remapping process form adapters
Pls. let me know ur thoughts.
~VSN

Superdrive not able to read DVDs or CDs

I'm having an iMac G5, running MacOs 10.4.3 with an Matshita DVD-R UJ-846. Since quite some time now I'm not able to read inserted DVDs or CDs. Either a dialogue box appears telling me I've inserted a blank disk or nothing appears and I have to find another way to eject the disk again. I have no clue whether the drive is ruined or I simply need another newer driver. Please, can anyone help? Cheers!

Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Sometimes, repairing permissions & restarting your computer helps.
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Make sure the DVDs are not dirty, smudged and/or scratched.
http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
http://docs.info.apple.com/article.html?artnum=88338 What to do if your computer won't recognize a FireWire or USB device
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
TIP: Update your OS to 10.4.11 along w/all the applicable updates through Software Update. Any reason why you are using such an outdated OS?

Reading long text from excel file to an internal table

Hi
Can any body tell me how to read long text from excel file to an internal table.
When i am using this FM KCD_EXCEL_OLE_TO_INT_CONVERT then it is reading only 32 characters from each cell.
But in my excel sheet in one of the cell has very long text which i need to upload into a internal table.
may i know which FM or what logic i need to use for this problem.
Regards

Hi,
Here is an example program. It will upload an Excel file with two columns. You could also assign the Excel structure dynamically, but I wanted to keep the example simple. The main point is that the internal table (it_excel in this example) must match the Excel structure that you want to convert.
Remember, this is just an example to help you figure out how to properly use the technique. It will certainly need to be modified to fit your requirements, and as always there may be a better way to get the Excel converted... this is just one possibility that has worked for me in the past.
*& Report zexcel_upload_test                            *
REPORT zexcel_upload_test.
TYPE-POOLS: truxs.
TYPES: BEGIN OF ty_excel,
         col_a(10) TYPE n,
         col_b(35) TYPE c,
       END OF ty_excel.
DATA: l_data_tab         TYPE TABLE OF string,
      l_text_data        TYPE truxs_t_text_data,
      l_gui_filename     TYPE string,
      it_excel           TYPE TABLE OF ty_excel.
FIELD-SYMBOLS: <wa_excel> TYPE ty_excel.
PARAMETERS: p_file TYPE rlgrap-filename.
* Pass the file name in the correct format
l_gui_filename = p_file.
* Upload data from PC
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename                = l_gui_filename
    filetype                = 'ASC'
    has_field_separator     = 'X'
CHANGING
    data_tab                = l_data_tab
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    OTHERS                  = 17.
IF sy-subrc <> 0.
*   MESSAGE ...
EXIT.
ENDIF.
* Convert from Excel into the appropriate itab
l_text_data[] = l_data_tab[].
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
    i_field_seperator    = 'X'
    i_tab_raw_data       = l_text_data
    i_filename           = p_file
TABLES
    i_tab_converted_data = it_excel
EXCEPTIONS
    conversion_failed    = 1
    OTHERS               = 2.
IF sy-subrc <> 0.
*   MESSAGE ...
EXIT.
ENDIF.
LOOP AT it_excel ASSIGNING <wa_excel>.
* Do something here...
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM filename_get CHANGING p_file.
*       FORM filename_get                                             *
FORM filename_get CHANGING p_in_file TYPE rlgrap-filename.
DATA: l_in_file TYPE string,
        l_filetab TYPE filetable,
        wa_filetab TYPE LINE OF filetable,
        l_rc       TYPE i,
        l_action   TYPE i,
        l_init_dir TYPE string.
* Set the initial directory to whatever you want it to be
l_init_dir = 'C:\'.
* Call the file open dialog without multiselect
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title            = 'Load file'
      default_extension       = '.XLS'
      default_filename        = l_in_file
      initial_directory       = l_init_dir
      multiselection          = 'X'
    CHANGING
      file_table              = l_filetab
      rc                      = l_rc
      user_action             = l_action
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      OTHERS                  = 4.
IF sy-subrc <> 0.
    REFRESH l_filetab.
ENDIF.
* Read the selected filename
READ TABLE l_filetab INTO wa_filetab INDEX 1.
IF sy-subrc = 0.
    p_in_file = wa_filetab-filename.
ENDIF.
ENDFORM.                    " filename_get
Regards,
Jamie

I am not able to read a barcode from a image

I want to read a barcode which is part of a big image on which i have to work on,i am not able to read the barcode as i have to give the correct ROI,which in my case has to be set dynamically,can any body help me in this

Please post an example image, and I'll try to help...
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Not able to read AddtionalResult.requirments

Hi,
am using the followwing code
voidaxApplicationMgr_UIMessageEvent(objectsender,NationalInstruments.TestStand.Interop.UI.Ax._ApplicationMgrEvents_UIMessageEventEvente)
if (e.uiMsg.Event ==UIMessageCodes.UIMsg_Trace)
try
intframeid;
SequenceContext seqctx = e.uiMsg.Thread.GetSequenceContext(0, outframeid);
if(seqctx.PreviousStepIndex >= 0)
Stepprvstp = seqctx.PreviousStep;
StepTypeprvstptyp = prvstp.StepType;
PropertyObjectstepPropertyObject = prvstp.AsPropertyObject();
String testid=String.Empty;
if (string.Equals(prvstptyp.Name, "NumericLimitTest"))
testid = stepPropertyObject.GetValString("Result.AdditionalResults[\"Requirements\"]", 0);
double lwlimt = stepPropertyObject.GetValNumber("Limits.Low", 0);
double measValue = stepPropertyObject.GetValNumber("Result.Numeric", 0);
String unit = stepPropertyObject.GetValString("Result.Units", 0);
am not able to read the Requirments by "testid = stepPropertyObject.GetValString("Result.AdditionalResults[\"Requirements\"]", 0);"
but am sucessful in reading all others.
can you please help me in this regards.
Thanks
IVI

IVI,
please do not open new threads for the same topic......thanks
The discussion is kept there.
thanks,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

ABAP Function to read long texts in HR Infotypes

Is there any standard ABAP function to read long texts in HR infotypes like ABAP function to read comments entered in infotype 19

HI ,
try this code
tables pcl1.
include rpc1tx00. " This include is explained on web page above
start-of-selection.
perform fill_key. perform get_data.end-of-selection.
form fill_key.
tx-key-pernr = p_pernr.
tx-key-infty = p_infty.
tx-key-subty = p_subty.
tx-key-objps = p_objps.
tx-key-sprps = p_sprps.
tx-key-endda = p_endda.
tx-key-begda = p_begda.
tx-key-seqnr = p_seqnr.
"OR
SELECT * INTO CORRESPONDING FIELDS OF wa_p0219
   FROM pa0219
   WHERE pernr = p_pernr
     AND subty = p_subtyp
     AND endda = '99991231'.
ENDSELECT.
MOVE-CORRESPONDING gs_p0219 TO tx-key.
    MOVE '0219' TO tx-key-infty.
     IF wa_p0219-itxex = 'X'.
       MOVE-CORRESPONDING wa_p0219 TO tx-key.
     endif.
endif
endform.                    " fill_key
form get_data.
      import ptext from database pcl1(tx) id tx-key.
       loop at ptext.            "ptext is defined in above include
               write: / ptext-line.
      endloop.
endform. " get_data
Prabhudas

Not able to read long text in MCI10001

Similar Messages

Maybe you are looking for