Not able to see inspection lot in QA32

i did MIGO, but i could not see the inspection lot in QA32.so i checked it in MMBE.
there material is showing in Quality inspection stock.

Hi Sandeep,
Check the folowing points,
See date range, secondly select radio button as lots without UD in list setting,
or check your input parameters.
Reward points if useful.

Similar Messages

  • HT6023 I am not able to see Inspect and other tabs. I have recently bought my Mac Book Air and updated it to OS X Mavericks and have latest iMovie 10.0.1.

    I am not seeing the band in between the Library and Project that has Play button and other command buttons. When I go to IMovie and Preferances, I see the
    only options as follows "Clip: Apply Slow motion automatically" and Theater : Automatically upload content to icloud. But various forum discussions mention that this should open up options for browser tab, inspector tab etc. I looked at other menu's and I do not find anything. Can somebody help solve this.

    After repeated search, I found my answer. I have both iMovie App on my Mac. Sadly they don't share the library or events. I liked the version 9 having inspect tab and others where you could manually enter many values which in version 10 takes hec of playing around with your mouse.
    For example, In version 10 you have hold the mouse or trackpad to adjust the % of sound of strip and still may not get to desired value. In version 9, you can bring up a window for adjusting audio and enter the values directly. This is user friendly.
    I guess, I have to live with two versions for a while. App store does no longer haver version 9. Hope any new updates to OS wont automatically delete version 9.

  • Proxy problem:not able to see namespaces/SWC's in sproxy

    hi,
    I am not able to see the namespaces/SWC's when i use the transaction SPROXY.
    But strange thing is it is showing BASIS components in the list.
    Rest of the SWC's are not visible.
    Help needed.
    Ranjit

    Dear Udo,
    >>i m very relaxed, good thinks need a while. Patience can be helpful
    this confuses me
    Anyway I belong to a country where great <b>Mahatma</b> <b>Gandhi</b> was born so dont worry I have a lot of patience and decency is our daily practice...
    Leave everything apart... In the blog if you see it is clearly mentioned->
    "<i>After the message interface is developed in the integration repository, proxy is generated on the client 100 using SPROXY transaction. SPROXY transaction lists all the message interfaces in the integration repository. We have to choose our message interface Proxy_Interface_OB and click Create.</i> "
    this makes a problem...
    Ranjit

  • Not able to see all the SAP tables from CR 2008

    Hi All,
    1)I am not able to see all the SAP database tables(DEV server) from Database expert menu in CR 2008. Only tables those start with alphabet letters upto A & B are visible. I checked the database connection>right click>options> found no filters as well.
    We are using the CR 2008 trial version with SAP ECC.
    2) When i am trying with Production Server of SAP ECC, I am not able to logon to the SAP from CR 2008. It is giving error message
    as : LOGON FAILED : User USER1 has no RFC AUTHORIZATION for function group SYST
    Please help me to resolve these. Thanks in advance.

    Thank you very much ingo.
    You helped me a lot.
    One more question, when I am trying for SAP database connections say for ex: 10.57.410.70, again and again some times the connection is getting saved in my connections with as new versions/variants like
    10.57.410.70_1 or so. How to overcome this.
    Thanks in advance ingo
    Badari

  • Not able to see specific tags for FSCM Credit Management on BP master data screen

    Hi All,
    I have already set up Collections & Dispute Management,
    I am now on my way to start FSCM Credit Management setting up. I have already created the BP role (UKM000) and assigned it for direction customer to BP, but I am not able to see any specific tag on BP Master data related to Credit management, (just as I can see "Collections profile" tag, in reference to Coll. Mngmt).
    So, I am not able to see these tags yet: "Credit profile", "Credit worthiness", "Cresit limit and control".....under Credit Management BP role!
    What am I missing there? Have I got to activate BAdi UKM_R3_ACTIVATE in order to be able to "see" those BP tags???
    ....Or what else?
    I will reward with points if someone can provide me any hint about this issue.
    Thanks a lot.

    Hi Pallavi,
    Many thanks for your quick response. However, I have not succeeded in seeing that tab.
    Let me tell you, I may be confused by a document I downloaded from internet about the BP master data views (as for the FSCM Credit Management role, of course) . Please find below the commented tag. It is an imaged I copy to you from that document I told you, for you to see which tag I am talking about:
    I don´t know the content of that tab...but I would like to see it in place....you know..
    Now, I checked you last answer and I saw that everything was already set by factory, please find below:
    BUS4 view:
    BUS5 view:
    However, I´m still not able to see the tab I told you at the beginning (first image). Am I confused about something here? Many thanks for your patience (these things happens when you set FSCM Credit Management for the first time).
    Is that tag accesible?
    Many thanks!
    Wilson

  • Not able to see Presentation catalog in BI Office

    Hi All,
    I have upgraded from MS Office 2003 to 2007. I have installed BI office on my local system and trying to connect to my dev server. The connection is successful and able to login to BI office from MS Excel 2007 but I am not able to see the presentation catalog window in the Excel 2007.
    Please let me know if anybody else has encountered similar sort of issues.
    Can anyone guide me, this is smthng urgnt...
    Regards,
    Apoorv
    Edited by: user11001347 on Sep 29, 2009 12:50 AM

    Hi,
    I had the same problem and also tried to fix it by uninstalling and reinstalling the BI Office Plug-In. I found the complete uninstallation is a little more than just running it through Windows "Add and remove programs"
    Here is what I found:
    1. Uninstall using "normal" Windows functionality
    2. Search the folder "C:\Program Files\InstallShield Installation Information"
    - there are a lot of folders beginning {.. in that
    - search every folder and find the one for Oracle BI Office by opening every "setup.ini"
    - remember that folder
    - delete that folder
    3. Open windows registry and found the same key remembered earlier
    - delete everything containing that key
    4. Open MS Excel, Manage AddIns and look if the PlugIn is still installed. If yes, delete it
    5. Delete the folders where you've installed Oracle BI Office (both: BIOfficeExcel and BIOfficePowerpoint
    Re-Install Oracle BI Office

  • Not able to see output

    Dear all,
    In the following procedure, i am not able to see output, if i done this by hardcoding values then working fine. while testing i got the error is :"no data found"
    could anyone help me to overcome this problem. iam using 11g.
    create or replace Procedure SP_GET
    p_CompanyCode IN VARCHAR2,
    p_PolicyNo IN VARCHAR2,
    p_resultset OUT TYPES.cursortype
    AS
    AgentNo VARCHAR2(9);
    Clientno VARCHAR2(10);
    Agentname CHAR(60);
    begin
    OPEN p_resultset FOR
    SELECT MWAGTN into AgentNo FROM ext_lsp_CASMWAGT WHERE MWCO = '''|||p_CompanyCode|||''' And
    MWPOLN = '''|||p_PolicyNo|||''' and
    Exists (SELECT MCCSTA FROM ext_LSP_CASCNTRM WHERE MCCO= '''|||p_CompanyCode|||''' And MCCNTR = '''|||p_PolicyNo|||''');
    IF AgentNo IS NOT NULL THEN
    SELECT CRCLTN into Clientno FROM ext_lsp_CMSUSREL
    WHERE CRCO= '''|||p_CompanyCode|||''' And CRALPH = 'AGT' And CRCTL1 = AgentNo;
    END IF;
    SELECT CMNAME into Agentname FROM ext_lsp_CMSCLNTM WHERE CMCLTN = Clientno ;
    dbms_output.put_line(AgentNo||Agentname||Clientno);
    end;

    Your procedure looks completely incorrect. It has lot of unnecessory code in it. Tell us what is your objective. What do you want SP_GET to do.
    OPEN p_resultset FOR
    SELECT MWAGTN into AgentNo FROM ext_lsp_CASMWAGT WHERE MWCO = '''|||p_CompanyCode|||''' And You are opening a cursor and at the same time you are selecting the value into a variable. That is wrong. And you don't have to enclose variables with single quotes in the where clause.
    All the SELECT statement in your procedure can be combined into a single statement like this
    select a.mwagtn as agentno
         , c.crcltn as clientno
         , d.cmname as agentname
      from ext_lsp_casmwagt a
      join ext_lsp_cascntrm b
        on a.mwco   = b.mcco
       and a.mwpoln = b.mccntr
      left
      join ext_lsp_cmsusrel c
        on c.crctl1 = a.mwagtn
       and c.crco   = a.mwco
       and c.cralph = 'AGT'
      join ext_lsp_cmsclntm d
        on d.cmcltn = c.crcltn
    where mwco   = p_companycode
       and mwpoln = p_policyno;

  • Not able to see the data in the report

    Hi All
          In my cube i am having data.But when i am running the report ,i am not able to see the data.
        The error its throwing is -No Applicable data found.
        what could be the problem,please provide me the idea to solve the problem.
    Thanks&regards
    syam prasad dasari

    HI,
    See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
    Thanks

  • Not able to see data in the qualifier table of the main tbl , Data Manager

    Hi,
    I have an issue of not able to see the data of two qualified table after populating them.
    It is in mdm-5.5 ps4.
    When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
    However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
    However unlike other qualified tables the data does not showup automatically for these two tables.
    Appreciate any suggestion or feedback on this.
    regards,
    -reo

    You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
    You use the Filter Checkbox to limit the qualified table records by the current search selections.
    Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
    If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
    Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
    Message was edited by:
            Adhappan Thiagarajan

  • Not able to see data in Pivot table

    Hi,
    I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
    Thanks

    Hi copter,
    Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
    (I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
    Cheers,
    KK

  • Not able to see data in 0FIGL_V30 & 0FIGL_V31

    Hi,
    I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
    I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
    Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
    Can anyone advice please. thanks
    SD

    Hi All,
    Yes I've checked data in underlying cubes.
    Mulitprovider is fine.
    I've added Master Data for both 0GL_ACCTP  and 0ACCESSTP
    RFC connection is fine.
    No DTP & Transformation since this is Virtual Provider based on Functional Module.
    However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
    It just not pulling data.
    Is there some setting I'm missing?
    FM's used for Virtual Providers are
    0FIGL_V30  - RS_BCT_FIGL_SREP_DATA_GET_V30
    0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
    SD

  • Not able to see Data in Xcelsius 2008

    Hi everyone,
    My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
    System Info
    Xcelsius 2008 Enterprise Trial Version SP 3.0
    SAP BW 7.1 SP 6 ABAP and JAVA
    Any help would be appreciated

    Hi Rashid,
    When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
    To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
    Regards
    Matt

  • Not able to see hierarchial org structure by clicking on Expand this branch

    Dear experts,
    I am currently using the Online data extraction via sap for Nakisa Integration with SAP Landscape.
    I have completed the configuration of Nakisa with the help of configuration guide and administrator guide - After completing administrator steps the org chart is visible - When i navigate to the org structure i can see the org unit under the org structure root that i configured as an administrator in the general settings section.
    When i click the + sign ie on expand this branch i am not able to see all teh org units under the displayed branch.
    Can you please guide me regarding how one can view the org structure below the selected branch when i click on expand this branch section.
    Manager Personnel Id is not maintained for this org unit - Should the user clicking on the expand this branch be the manager of the org unit to see the org structure.
    Regards
    HKishan

    Dear Luke,
    I am not able to see that navigation icons within an org chart box - The org unit that is displayed on clicking the orgchart does have branches in SAP but i am not able to see these navigation icons that lead me to these branches.
    Is there any specific step that needs to be done to see these branches.
    By the way what is the log file you are refering to is it the "PresentationResources.xml " or is it any other log file.
    Regards
    Hkishan

  • Not able to see the tree on the jspx page after running

    Hi All,
    This is something strange.I am dragging the VO on the page fragment from the data control as adf tree. And I am using the panel collection as component for adf tree.
    After running the jspx when I am moving to the fragment I am not able to see the tree.
    However when I am running the AM it is working properly for the view objects and view link used to populate the tree.
    Can anybody put some thoughts on this.
    Thanx
    Kanika

    Thnx for your replies..
    I am dropping taskflow as region . I am not using the switcher component.
    On left side of the page the tree is visible now. but the taskflow is not refreshing on the click of the tree node based on the value of the node.
    Please advice how to accompolish this now??

  • Not able to see the request in ODS to activate

    Hi all,
    I have a content ODS, i scheduled a infopack and the data came in thru ok. But inorder to upload the data into the cube, i know i need to activate it before. But when i rightclick and go to activate data in the context menu .. there is a popup which shows all the request id's in the ODS. but i'm not able to see my request to activate it ... Is there some flag has to be set inorder to see the requests in the activation list? once its activated, I think all i need to do is "UPDATE ODS DATA TO DATAPROVIDER" as it is a standard content. Is there something else i need to do ..Pls guide.
    Now, I have a new problem, when i'm trying to see the transfer structure, it doesnt open and i get a msg
    Transfer method 'TRFC with PSA' is not supported by the source system
    Diagnosis
    The PSA transfer method is used to transfer data from source system CRM to transfer structure 0xxx_xx_xx_I_BB. Source system CRM does not support a PSA transfer.
    Procedure
    Define the PSA in the source system.
    Its actually a content one i installed and i didnt do any customizations to it... Shouldnt it work out of box? If no!! how can i define PSA in the source system.
    Any help is appreciated.
    Mav.

    Hi Mave,
    Kindly check the following:
    1.) Are you sure that the loading process finished successfully in the ODS? Kindly ensure it did.
    2.) Have you tried providing a longer <b>Date Range</b> in the <i>Request Display</i> (lower right).
    --Jkyle

Maybe you are looking for