Proxy problem:not able to see namespaces/SWC's in sproxy

hi,
I am not able to see the namespaces/SWC's when i use the transaction SPROXY.
But strange thing is it is showing BASIS components in the list.
Rest of the SWC's are not visible.
Help needed.
Ranjit

Dear Udo,
>>i m very relaxed, good thinks need a while. Patience can be helpful
this confuses me
Anyway I belong to a country where great Mahatma Gandhi was born so dont worry I have a lot of patience and decency is our daily practice...
Leave everything apart... In the blog if you see it is clearly mentioned->
"After the message interface is developed in the integration repository, proxy is generated on the client 100 using SPROXY transaction. SPROXY transaction lists all the message interfaces in the integration repository. We have to choose our message interface Proxy_Interface_OB and click Create. "
this makes a problem...
Ranjit

Similar Messages

Not able to see Enhanced Data type in SPROXY in SRM

Hello Experts,
We are planning to use an outbound (SRM to PI) Proxy between SRM and PI to send XML messages. Our SRM team has requested a Datatype enhancement of SAP's predelivered SCV, SAP SRM SERVER 7.0 component i.e. RFQRequest. So, In ESR we have created a new Enhanced data type based on RFQMessage (SAP's pre delivered datatype). I've added their (SRM team's) 6 extra elements to this new Enhanced Data Type, RFQMessageExtension. And, saved and activated it.
Now, to generate the Proxy I went into SRM -> SPROXY, but I donu2019t see my Enhanced Datatype, RFQMessageExtension. Please let me if you've come across this problem or know the solution. I was following this blog [/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner|/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner]
Thanks,
Mayur

Hi Mayur,
Have you read this article?
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0bb5687-00b2-2a10-ed8f-c9af69942e5d
Regards,
Ravi kanth talagana

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

I have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i ha

i have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i have on my macbookpro. Can you help me to find out where i am registerd?

If your registrations do not show at https://www.adobe.com/account.html you will not get help in an open forum
You MAY get help at Contact Customer Care
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Not able to see the request in ODS to activate

Hi all,
I have a content ODS, i scheduled a infopack and the data came in thru ok. But inorder to upload the data into the cube, i know i need to activate it before. But when i rightclick and go to activate data in the context menu .. there is a popup which shows all the request id's in the ODS. but i'm not able to see my request to activate it ... Is there some flag has to be set inorder to see the requests in the activation list? once its activated, I think all i need to do is "UPDATE ODS DATA TO DATAPROVIDER" as it is a standard content. Is there something else i need to do ..Pls guide.
Now, I have a new problem, when i'm trying to see the transfer structure, it doesnt open and i get a msg
Transfer method 'TRFC with PSA' is not supported by the source system
Diagnosis
The PSA transfer method is used to transfer data from source system CRM to transfer structure 0xxx_xx_xx_I_BB. Source system CRM does not support a PSA transfer.
Procedure
Define the PSA in the source system.
Its actually a content one i installed and i didnt do any customizations to it... Shouldnt it work out of box? If no!! how can i define PSA in the source system.
Any help is appreciated.
Mav.

Hi Mave,
Kindly check the following:
1.) Are you sure that the loading process finished successfully in the ODS? Kindly ensure it did.
2.) Have you tried providing a longer Date Range in the Request Display (lower right).
--Jkyle

Not able to see the result in particular column of BPC report

Dear All,
I have problem in one of the BPC report where I am not able to see the result into one column but rest of the users are able to see the result for same column in same report without any issues.
Generally, I used this report frequently but having such problem from last few days. Excel has created any logs which I need to clear? Please advice.
Request your help to resolve such problem please.
If you need any information, please let me know.
Thank You
Kind Regards
Anukul

Hello Anukul,
In the report what type of data you are trying to check in that column. can you please brief about report.
And also please check the excel cell format (right click and check it is a numeric or character), which may help to resolve this issue.
Regards,
Rajesh.K

How can I prevent firefox from displaying an overall black page after I request a topic search in the google/firefox search box? Not able to see results

I loaded Mozilla v31 on my PC laptop which uses Windows XP operating system with all current updates. When I click on my internet icon, it leads me to the Mozilla page with a Google search bar. Once I type a topic in and click for the search to begin, the Firefox page turns all black and I am not able to see any results or action being taken. I click on the back arrow and enter a new topic, and click on search button, it repeats the same behavior and the Firefox page turns black. Essentially Mozilla Firefox is not a usable browser unless I can fix it. Help!

When this happens, has the address bar changed to a google.com address or is it still blank?
Some graphical glitches are caused by an incompatibility between Firefox and your graphics card drivers. The standard workaround for bypassing this is to disable Firefox from using hardware acceleration. You can make that change here:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
That will take effect the next time you exit Firefox and start it up again.
More generally:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

Not able to see Employee type supplier after upgrade to 12.1.2

We have custom responsibility for Payables Manager, after upgrade to 12.1.2 from 11.5.10, some of the employees are not able to see the Employee Type supplier, but some employees are able to see all. I thought this maybe related to Role so I tried to add the roles that are missing from the employees that are able to see all supplier, but didn't help. Anyone know where to look at this? Thanks in advance.

Hii ,
Can you brief your problem in detail ? What do you mean by Not able to see Employee Type Supplier , is it do you mean in the Lovs ? or which form ??May be I can look into it .
Thanks
vennala

BI Publisher: not able to see the xml data after creating a data model

I am learning BI publisher and trying to create a report data model
I created a new data model from the report tab, use query builder, able to see the results. Then i save it and try to launch XML view from clicking View .
I am getting unexpected exception, not able to see the XML view .
in the server console i got servlet exception, here is one of the line
com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303
Edited by: joysaha123 on Mar 17, 2010 6:07 PM

Hi karthik
Thanks for your response
Actually iam a beginner in java coding hence struggling to come up with the things
I tried putting your code and onserver side i see it is returning 09:12:17,234 INFO [STDOUT] [root: null]
actually the same program i wrote in java
and the same method i was calling from the main
and it is working fine and the xml document is getting displayed one important thing to be noted here is that the factory.newDocumentBuilder().parse(new File(filename));is returing XmlDocument
and the printing takes place
but the in same method public static Document parseXMLFile(String filename, boolean b) in servlet
the line factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
and this creating problem , had it returned XmlDocument
i would have printed the elements one one
but as it is returning deferredimpl
iam unable to print the elements
could you please tell me why factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
in servlets but in plain java pogram it is returing XmlDocument
Thanks
Bhanu

Apple TV and iTunes not able to see each other

I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
"I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
Good luck.

Users not able to see remote users on the node network

Users that belong to one node are not able to see users in another calendar
server node. Both calendar servers are pointing to the same directory server.
Some errors that occur in the log files:
DEXOTEK ERRCODE Ox13608 -> SchedBaseOpen: Section name too long
DEXOTEK ERRCODE Ox13608 -> OpenConnection: SchedBaseOpenOnHost
And when uninode -cws nodeID is run, it does not report being able to see all
the users and resources on the remote nodes.
uninode: connected to hostname.net.xxx.com, node 10000
directory of items: 10 (USERS = 10/RESOURCES = 0)
CONNECTION EX AV Q-SIZE IN-PROCESS IMPORT-DIR
(10000)->xxxxxx.xxx.com(10001) 2 2 0 0 370 (U=370/R=0)
Here is the nodes.ini file:
+ H=xxxxxxx.xxx.com/N=10000
+ H=xxxx.xxx.com/N=10001
all=2
There is a reported bug, that 16 chars is max on domain names for the nodes.ini
file, which means that you need to change that file and use:
     a) an alias that can be resolved on the network with either DNS or local
     host files
     b) use the IP address.
As documented in the release notes, here is the procedure on how to modify the
hostname when it is too long. Or how to modify the hostname for any reason.
Fix for long host names problem
If the fully qualified domain name for your network exceeds 16 characters, it
will be necessary to shorten the host name of all the servers in the Calendar
Server network . These instructions must be carefully followed to avoid causing
problems with the network. Ensure that the procedure is applied to ALL nodes in
the Calendar network.
1) The following procedure should be carried out on each server in the
Calendar network:
a) Bring the Calendar services down.
% unistop -y
b) Run the unidbfix command in export mode.
% unidbfix -export -n node-id
This will create a remotenode.ini file for each node on the server. The file is
located in the node's perm directory.
Example:
If you have two nodes on the server ROCK, node 1(in N1) and node (in N2), the
files are:
/users/unison/db/nodes/N1/perm/remotenode.ini
/users/unison/db/nodes/N2/perm/remotenode.ini
The remotenode.ini file will look something like this:
[1]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni2"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
[2]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni4"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
2) Once you have run unidbfix in export mode on all the servers, proceed as
follows:
a) Compare the remotenode.ini files and verify that the entries are the
same. In each file, you will note that an entry for the local node is not
included.
b) Edit one of the files (on any of the servers). This file will be
referred to as the master file. Add the appropriate entries for the
local node (copy the section from one of the other files). Modify the
RN_HOSTNAME in each of the sections of the master file to shorten the
name.
c) Copy the master file in the perm directories of each node on all the
servers.
3) Once the master file is in the perm directory of all the nodes, proceed as
follows on each server:
a) Run the unidbfix command in the -import mode.
% unidbfix -import -n node-id
b) Edit the nodes.ini file on the hub server and make the same changes to
the host names. You do not need to apply the changes.
c) Edit the [UTL] section of the /users/unison/misc/unison.ini file and
change the host name.
d) Start up the services.
% unistart
4) After all the changes have been made, run the uninode -cws all and
uninode -snc all commands and verify that the results are accurate.

See this:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8203.html
You should then see your pcs listed in Finder's sidebar under the shared section.
Regards

After webcatalog migration from 10.1.3.3 to 10.1.3.4.2 not able to see user

Hi Gurus,
I am facing an issue with web catalog migration.
Currently we are on 10.1.3.3 version and upgrading to 10.1.3.4.2.
As part of migration i have taken the RPD, NQSConfig, Web catalog, instanceconfig.xml files as backup. i followed manual way while taking the web catalog backup i.e zipped(tar) the prod catalog and moved it to some folder.
After 10.1.3.4.2 installation i have moved this zip file to the /OracleBIData/web/catalog and unzipped it. restarted all the servers. when we logged in presentation services we are not able to see the reports which we saved in "My Folder" when it comes to the reports which we saved in "Shared Folder" i am able to see all the reports and dashboards.
to debug this further i opened the web catalog by using web catalog manager and found out that all the reports and .atr files are there under that user ( USER folder, corresponding user folder ), and instead of my presentation server recognizing this folder its creatin new folder for the same user.
Because of this issue our release plans are getting postponed, please advise me.
what could be the problem and if i have done some thing wrong while taking the backup pls let me know the best way of backing up the web catalog.
Thanks,
Seshu

try this:
Archive all folders from 10.1.3.3 using catalog manager.
Update instance config on 10.1.3.4.2 so that it'll create a new webcat, open it and unarchive above folders.
If helps pls mark

Modify New VO but not able to see Attribute Value.

Hi ,
I am facing one problems during my VO extend. I have done below step,
1) Created new XXCustomVO based on exsiting CustomVO.Created new Attribute, modify SQL and mapped and gave new Name XXCustomInfoVO.
2) Assign this new XXCustomVO to new filed with Attribute name.
4) Copy XXCustomVO.xml and all class file from Desktop to Server in respecitve folder.
5) Import Page regions which i have created New Item.
6) Import with JPXImport.("Porject substitutions" )
7) Now I run the page no errors found but not able to see new attribute Data.
Then I checked "About Page" but everything is refected correctly only not able to see new attribute data.
Can you please help me out. Is there any wrong thing i am doing or something is missing still.
Thanks

Hi ,
Even exsiting attribute value alos not display. I mean I have 20 attribute in this exsiting VO and I have add one more XX attribute and same as XXVO but non of value is display out of 21 attibute.
Even i have hard coded "1234" for this attribute but always return null.
Where I have to foucs.
thanks
Raj
Message was edited by:
RajPatel

ODBC connection not able to see all schemas

Hi everyone,
We have noticed an unusual problem that just recently started. In our database, I have created a read-only user - only has the ability to connect to the database, and SELECT ANY TABLE. Then we have some applications (Crystal Reports and Lotus Notes Agents) that use this user to query data. The applications use an ODBC connection, and when we initially set this up, everything worked beautifully.
However, suddenly we have noticed that the ODBC connection is not able to see all of the schemas in the database. We have tested and confirmed this - using either 9.02 ODBC or 10.01, this happens with both of them. I created a couple new ODBC connections, one for each version, then I try to create a new Crystal Report, using this ODBC connection - when I connect using the read-only user, it connects just fine, but when it shows me all of the schemas available, I am only seeing about half of them (and of course not seeing the one that I really need to see).
However, when I use Microsoft Access, and try to import some External Data, and I use the same ODBC connections, then I AM seeing all of the schemas.
Has anyone ever seen anything like this? Any ideas on what I can do to troubleshoot?
Thanks,
Brad

I'm trying to get this issue figured out. Can you
tell me what you mean when you ask me to log in
directly as the same user using ODBC and query
ALL_TABLES - how would I do that?Using whatever Oracle database account you use in Crystal, log in to the database using SQL*Plus (or your favorite GUI like SQL Developer) and run a query like
SELECT owner, table_name
FROM all_tablesDoes that query show all the tables you expect, or are you missing some?
Also, you mention a parameter in the ODBC API that
controls which schemas are returned - is there any
way to see that value?An ODBC trace might show the value, I don't recall if the actual value is written out in the trace. Different front-end tools often have a place that allows you to filter out certain schemas, which is generally done by passing in a parameter to this ODBC API call. I don't know enough about your tools, though, to know where this might be.
Are there any other ODBC drivers I could try?There are plenty of third party ODBC drivers out there, but I would tend to be suprised if the ODBC driver was at fault here. You could also try patching the ODBC driver and/or Oracle client to the most recent patchsets.
Justin

Proxy problem:not able to see namespaces/SWC's in sproxy

Similar Messages

Maybe you are looking for